How Much Nitrous Can a Stock Engine Take?

How Much Nitrous Can a Stock Engine Take? - Engine Masters Ep. 13

Рет қаралды 7,457,347

7 жыл бұрын

The 13th episode of Engine Masters, presented by AMSOIL, is an unlucky one for a poor little 305ci Chevy small-block. It was the victim of our test of how much nitrous oxide power boost can be tolerated by a completely stock short-block with the original cast crank, rods, and pistons. Yeah, it ends badly, but before the engine's demise we learn a lot, showing you how nitrous oxide increases horsepower and giving you tips on how to use it safely on any engine. You'll also learn a pretty good power combo for a 305 Chevy! Engine Masters is supported by Mr. Gasket and Earl's Vapor Guard.
Subscribe now to make sure you're in on all the action!
kzfaq.info_...
Facebook - / motortrendmag & / hotrodenginemasters
Instagram @EngineMasters

Пікірлер: 6 100

@Scouter98 7 жыл бұрын

..now me and the mad scientist have to rip apart the block to replace the piston rings you fried

@MoistMouthMags 7 жыл бұрын

they killed marty vito!!!! XD

@bryanjjones4163 7 жыл бұрын

you got that from the fast and furious

@jessiedavis3543 7 жыл бұрын

+bryan j Jones no shit there buddy

@leftoverbrainz 7 жыл бұрын

+bryan j Jones your some special kind of stupid

@bryanjjones4163 7 жыл бұрын

+Victor Barajas (onedesire1392) really

@dfuller968 7 жыл бұрын

So next episode lets see the 305 prepped for nitrous!!! Lets see what you can get out of it.

@mecheng1993 7 жыл бұрын

I hope so too

@89v6bird 7 жыл бұрын

I agree ! Build it and see what it will take !

@SailinCTD 7 жыл бұрын

Maybe do a budget style build for the 305

@TheKajunkat 7 жыл бұрын

I agree. my thoughts exactly.

@0oYASASHIIo0 7 жыл бұрын

Yeah that would be nice to see in the next episode but the next episode is already filmed and out... on FUCKING motortrend on demand...

@driverjamescopeland 2 жыл бұрын

"Nirous does not blow up engines. PEOPLE blow up engines." I officially love this channel.

@xx_ironman77_xx1 9 ай бұрын

Motor trend does have some of the best car enthusiast shows out there

@shitbox7413 4 жыл бұрын

This is my favorite EM episode, I wish they would do the same test with nothing more than the stock rings gapped to .030”. With rings gapped properly, 118 gas, and the progressive controller, I bet it would safely handle a 400 shot.

@jamieschinkai1267 3 жыл бұрын

I was thinking the same thing

@thomaskimparker809 2 жыл бұрын

Yea.. it's all brand new... but put a few passes on it with that kinda spray, and you will see what the rods look like hanging out the side of it.. the rod bolts won't take the stress very long and they will stretch and when that happens its Katie bar the door cause the rods are leaving home... lol

@jesondag 7 жыл бұрын

Here we have a bone stock engine........ but.. we upgraded, this, this, this, this, this, and that...

@smminco 7 жыл бұрын

they specifically said stock short block.

@deadeyeduncan5022 7 жыл бұрын

Did you even watch the video?

@jesondag 7 жыл бұрын

yes, watched the whole thing it was interesting.... 1:18 "we have hopped it up a little bit it's got..." I liked the video, I just thought it was funny that he said it was bone stock, and then detailed a few things they upgraded on it.

@entropy156 7 жыл бұрын

+jesondag those upgrades effect the horsepower and torque figures, but they don't, in any way, effect how durable it will be in nitrous.

@entropy156 7 жыл бұрын

***** it is a stock bottom end...as stated in the video...and the bottom end parts are what nitrous breaks. That's the point of this video, in case you didn't actually watch it.

@firebirdude2 4 жыл бұрын

So stock BLOCK, not stock engine.

@XxMusclecarsxX 4 жыл бұрын

stock shortblock*

@chrisf5615 4 жыл бұрын

Well except for the cam... so almost stock.

@Superman85139 4 жыл бұрын

exactly what i was thinking lmao just clickbait

@Highstranger951 4 жыл бұрын

He said short block, not engine. Pay attention and ignorance will be less of a problem.

@Highstranger951 4 жыл бұрын

anonymous 1:16

@MrMrsregor 4 жыл бұрын

3:27 might be the most important part of this lesson for all of the viewers that are new to motor sports

@ithmiths 4 жыл бұрын

I wish i could have a “junk engine” like that

@N2DeepRacin 4 жыл бұрын

305s aren't a bad engine at all. With a 3k budget a 305 is peppy .. not fast in a 3500lb street car but just a fun little efficient engine that can be had for cheap. Those heads are only like 1200 bucks.. that cam is only 279 bucks from jegs. 350 dollar intake and 500 dollar carb. That nitrous kit is the starter kit for any real racer and can be had for around 750 bucks. For under 5k you can have a reliable 450hp 305. People make fun of them but look at the abuse the Ford 302 takes..... Short stroke, big bore, same as 305. Not bad for any engine you can obtain for 350 bucks at any junkyard in the nation.

@N2DeepRacin 4 жыл бұрын

@Dave Micolichek never did I say the bores were the same.. I stated both engines work off the same principal with bore vs stroke... Junior...

@michaelmcneil5036 4 жыл бұрын

Ya 305 engines are real impressive lmao🙄🙄

@spenck7740 4 жыл бұрын

@Dave Micolichek umm yeah okay?? Not hard to achieve an engine like THAT?? Obviously its not hard, the O.P is talking $$ wise...

@nickhoekstra2478 4 жыл бұрын

What i was thinking lol

@derpinbird1180 7 жыл бұрын

Now me and the mad scientist gotta pull apart the block, and replace the piston rings you fried!

@jerryscary2602 7 жыл бұрын

Love that movie

@whatupguy5685 7 жыл бұрын

dude I almost had u ....no u never had me u never had your car

@justinmadden58 7 жыл бұрын

i live my life a 1/4 mile at a time.

@wreklessracr 7 жыл бұрын

pop the hood. pop the hood? pop the hood!

@derpinbird1180 7 жыл бұрын

2ZJ ENGINE THATS BEEN IN A FIRE? ERMAGERD!

@troyg3831 4 жыл бұрын

I was always disappointed that they didn't properly gap the rings to see how far they could really go with cast internals

@shitbox7413 4 жыл бұрын

With rings gapped properly, 118 gas, and the progressive controller I bet it would safely handle a 350 shot, maybe 400.

@NOSNOOB11 4 жыл бұрын

Yea but that was the point

@lukewarmwater6412 2 жыл бұрын

well, since it is the expanding nitrogen that does most of the work. I.E. the burning fuel and oxigen heats the nitrogen and causes it to expand. since there are formulas to figgure out how much air you can force in with a blower, it would be close to the same, cause thats all you are realy doing with a shot of nos more oxigen and more nitrogen, same as a blower but without the moving parts.

@lenabeeman9041 2 жыл бұрын

Keep in mind, stock bottom ends don't have piston rings with extra gap for nitrous.

@troyg3831 2 жыл бұрын

@@lenabeeman9041 right but If you are gonna build a cheap nitrous motor, might as well do it right

@marcustaylor670 4 жыл бұрын

I'm a bit of a geek and have looked up tests of Amsoil against other oils, I would say that using Amsoil contributed to that engines ability to hold together as long as it did and make the power it was making. Unfortunately it is hideously expensive here in the UK, Castrol Edge is probably the best I've used, it burned less and the engine ran better while feeling more responsive and powerful. Edge costs over twice as much as a normal fully synthetic oil but is around half the price of Amsoil.

@AzraelSilent 4 жыл бұрын

Thank you for creating this vid. You delivered exactly what I wanted to see.

@retroracing4022 4 жыл бұрын

That lil 305 was making some decent power. Im sure that engine with the 150 shot would have made a decent weekend warrior setup.

@RealSteelStreet 4 жыл бұрын

No doubt...500 hp 305 could really hurt some feelings! lol

@craigjohnson8217 4 жыл бұрын

Landon I agree. 350+hp NA is stout for a 305 and over 500 on a 150 shot it gets my vote.

@pieterveenders9793 3 жыл бұрын

@@craigjohnson8217 What does the 150 in "150 shot" mean?

@craigjohnson8217 3 жыл бұрын

@@pieterveenders9793 150 hp nitrous

@pieterveenders9793 3 жыл бұрын

@@craigjohnson8217 So if I understand correctly that engine will produce an additional 150 hp when nitrous is applied, making a total of around 500 hp?

@tripjet999 7 жыл бұрын

Too much Nitrous and the engine will begin to laugh.

@SOU6900 4 жыл бұрын

😆

@ibramguirguis 4 жыл бұрын

You're a diver haaaaaa

@MrGaryGG48 3 жыл бұрын

The guy that really gets to laugh is the one at the parts counter..."You're gonna need one of these, one of these, one more of these, and a whole bunch of those!!!" Parts Guys love people playing with nitrous!! ;^)

@eddiesheeran5791 4 жыл бұрын

Really awesome info and a lot of fun to watch! Thanks guys!

@barrykery1175 4 жыл бұрын

What a great video. I learning a lot about using NOS. Great job guys. Thank.....Barry

@DOWDFILMS1 7 жыл бұрын

You're lucky you didn't blow the welds on the intake

@johnnygreen730 7 жыл бұрын

+Ford RS lol

@jaybelle532 7 жыл бұрын

that's a good fast and the furious quote... God I love how stupid they were

@punkinvine1179 7 жыл бұрын

Your lucky stupid isn't fatal.

@Pbeezy4 7 жыл бұрын

+Ford RS golden

@Warndog9 7 жыл бұрын

They were fine. The danger to manifold light didn't come on.

@julienfoss1392 7 жыл бұрын

wait can we see the dyno chart of the blow up

@hadenough7901 7 жыл бұрын

yeah!

@lukesworld2864 7 жыл бұрын

I was curious of that myself!

@Buggabones 7 жыл бұрын

It blew up before reaching peak hp/tq looks like. Wouldnt see anything but 400-500hp then drop off.

@ormand3000 7 жыл бұрын

+Taylor Jenkins were you there?

@bakatsugu 7 жыл бұрын

just watch the video and pay attention dude

@uniqueone1653 4 жыл бұрын

Thank you for the class. Great video. Keep up the grate work.

@scotts7017 4 жыл бұрын

This is an excellent video. Thank you for the great topic.

@MustObeyTheRules 7 жыл бұрын

Pretty impressive numbers on that stock 305...

@Grouperhound 7 жыл бұрын

Agreed. That was the most impressive part of the video. 358HP!! Table top flat torque curve... all with a stock short block.

@MustObeyTheRules 7 жыл бұрын

Yea i was shocked when he said the numbers lol.

@jokertokerfourtwozer 7 жыл бұрын

stock internals do not represent horsepower, just durability, the impressive numbers were because of the upgraded cam, roller rockers, vortec heads, bigger intake and an 850 double pump carb, put forged internals in the short block and it would make the same numbers. but still was impressed with 358hp and that torque curve.

@focused313 7 жыл бұрын

jokertokerfourtwozer agree completely

@konnerkramer3381 7 жыл бұрын

jokertokerfourtwozer you do realize you just restated what he said in the video

@mohamedmagdy4857 7 жыл бұрын

DANGER to manifold ... (floor panel drops)

@MrDumptyTheDeadman 7 жыл бұрын

Damn cast aluminum floor panels.

@Kmsfnd 7 жыл бұрын

lol

@m4ista 7 жыл бұрын

shut up !!!! stage 2

@ultra_ultra 7 жыл бұрын

I had you bro

@lmf868 7 жыл бұрын

+Ultra Sound you never had me. you never had your car

@hightechredneck_0566 Жыл бұрын

Really enjoy the videos, they're so well done. Thanks you.

@PAUL_K 3 жыл бұрын

Come on man! Stock 305 is a honest motor that deserves respect! SBC is a tough stand up guy under the hood and this episode proves that! A Cadillac HT4100 - now that's THE BIG TIME JUNK!

@michaelangelo8001 Жыл бұрын

I like them both. How much do you actually know about the 4100?

@nunyabizness2433 6 жыл бұрын

Engine Masters is without a doubt the most informative and entertaining thing I have ever come across concerning performance engines. Please keep this show alive. I enjoy it more than anything else on KZfaq by far. I fooled around installing expensive parts on piles of rusted steel and bondo starting in 1968. I ended up fading from the scene when computers come along. I guess I was intimidated Here I am at 64 years old and an old 66 Chevy II dragster fell into my lap about a month ago. A week later an L98 TPI and the rest of the drive train from an 89 pontiac Formula ended up in my ownership. I didn't plan it but now that I am slightly computer savvy I'm getting an itch!

@bobbycone2 4 жыл бұрын

This show needs to come back to KZfaq! !

@midsouth2strokes185 3 ай бұрын

Dude, it 4.99 a month and u get all the shows

@7GabriEl7FM7 6 ай бұрын

I’m glad I found this channel. Very helpful & very interesting!!🍻💯💯

@alexblack6057 4 жыл бұрын

Very informative channel. Great job guys👌🏻👌🏻👌🏻

@tattrie17 7 жыл бұрын

How many pulls at 600 h.p. would she have made! Now we will never know. Guess I'll have to build one now......stupid show makes me spend money, lol. Love it!

@SteadyFreddie 7 жыл бұрын

84/89 Bell-Brand

@whatareyoudoingyouidiot342 7 жыл бұрын

Maybe a couple hard pulls, but sooner or later that piston would've gone.

@RealSteelStreet 4 жыл бұрын

2, maybe 2 and a half passes! lol

@RealSteelStreet 4 жыл бұрын

Guess it really depends on if we're talking 1/4 or 1/8 mile? 3 to 3 1/2 in the 1/8th and prolly 1 1/2 to 2 full passes in a 1/4 if I was a gambler!! Personally, I would've stuck with the (quite impressive might I add) 150 shot at 550hp total and made 10-20 good passes and cashed in on the little 305 while gambling!! 💵😂

@RealSteelStreet 4 жыл бұрын

Oops, my bad...I jumped the gun there thinking of what I would've done versus wasting the "Little Engine that Could" on dyno pulls 🤷‍♂️

@rickm.5365 7 жыл бұрын

"This ChinGaDERA"....CLASSIC!

@juansandoval8483 7 жыл бұрын

always thought it was chingadera

@juansandoval8483 7 жыл бұрын

chingadera A wonderfully suggestive word for "thing". Safe to use at work or in the bedroom. "Are you done playing with that chingadera?" "I can't seem to get that chingadera to work!"

@cheeriomartinez 7 жыл бұрын

LMao i was about to say that too!

@juansandoval8483 7 жыл бұрын

+cheeriomartinez well i been cussin in spanish since childhood and I swear its chingadera or dang been saying it wrong all my life haha

@FragLikeIts 7 жыл бұрын

Chingadera

@julioguzman5197 11 ай бұрын

Love learning new stuff thanks for putting this out six years ago, but I'm barely seeing it now lol

@dklahr7352 4 жыл бұрын

This show could not be any better.

@automotiveenthusiast1160 7 жыл бұрын

At 6:17 when u said "chingadera", that made me crack the eff up! I was not expecting that. I enjoyed the video FYI.

@WiXhoRecords 6 жыл бұрын

I was about to write the same thing

@irvisgarcia1324 6 жыл бұрын

Lol

@1machetes 6 жыл бұрын

Yeah me too I was like wtf did he just said this chingadera... he must be working with lots of raza

@KrimeStar209 6 жыл бұрын

Lol yup got me too

@estebanrodriguez8049 4 жыл бұрын

Honestly

@y0Fiqqy 7 жыл бұрын

"Bone stock" *proceeds to point out various different aftermarket parts*

@arvidgyllner 7 жыл бұрын

mario None of wich Will make a difference

@dirkdiggler7180 7 жыл бұрын

he clearly says "bone stock short block" u prob dont know what a short block is huh lol

@2kbaby924 6 жыл бұрын

Bone stock short block not the cylinder heads

@xboxfoeshizlmonizl88 6 жыл бұрын

mario literally just commented this you beat me to it great minds think alike

@VictorEstrada 6 жыл бұрын

This is a "bolt on" which is something added to the engine. The engine is still in its "stock" form as they didn't replace any of the internals. You can consider NOS as an air mixture

@pauljohnsonii950 4 жыл бұрын

i know a million people have said this.....so it's not stock...just pull an engine out of say a v6 camry and boost it until it explodes...don't say stock when it's not stock

@coreyfryer2712 4 жыл бұрын

When they said stock engine, they likely meant stock guts as the amount of nitrous in a V6 Camry probably couldn't handle much of anything considering it's not built for high energy output.

@roarore8810 4 жыл бұрын

The bottom end, which is what nitrous breaks, is indeed stock.

@blueblood5297 4 жыл бұрын

@@coreyfryer2712 I don't know Toyota over build there motors the amount of power a 1uz 4.0litre V8 can handle bone stock is insane

@flubdreload2818 4 жыл бұрын

Rewatch the beginning and you’ll catch that they said bone stock short block.

@pauljohnsonii950 4 жыл бұрын

@@flubdreload2818 what they say and what they do are two different things

@jeffbutler9240 3 ай бұрын

Best episode I’ve watched yet. lol. So proud of that little 305. Good boy!!

@QuattroRMT 7 жыл бұрын

I'm just sitting here, in Europe and the guy says "just a small Chevy engine, 3.5". WUUUUUUUUUUUUUTTTTTTTTTTTTT, that's huge xD We drive some fucking 1.0 EcoThreePistonEngines >.>

@JayNero777 7 жыл бұрын

they hilariuosly poor power for the size though.

@billybobjoe198 7 жыл бұрын

We get big engines from euro manufacturers. You've let your governments run your lives. You can reverse it.

@QuattroRMT 7 жыл бұрын

billybobjoe198 That's kind of true, many people in Europe are stupid and they think that socialism/communism is the best system in the world, and the European Union began... with it's shitty rules, and tells you what your country must do. Sad.

@75IFFY 7 жыл бұрын

Ahh, but Euro engines arent cast iron pushrod stuff from the 70s. They actually have some finesse

@freakyflow 7 жыл бұрын

305ci V8 they came in many GM cars Camaro, Trans am ..These cars also had 262 V6. 350ci V8 The 89' Trans am Had a 3.8L V6 Turbo which was 12 secs 1/4 mile Which was very fast for a stock factory car

@fuelerr 7 жыл бұрын

You guys are the MythBusters of Engine Mastery. Great educational show and freakin fun to boot. Thanks Guys.

@brianellman 3 жыл бұрын

This was absolutely fantastic. I loved this. and you guys are so much fun and Cool about it. Lovin Every Minute Of It. :-)

@nicholasgaudet6309 3 жыл бұрын

Surprising!!! Im pretty amazed at what it held up to

@mononomonono9450 4 жыл бұрын

You said "chingadera" and as a mexican and As a Spanish speaker I can attest and I feel obliged to say that you used the word to its fullest. I'm still laughing 🤣🤣🤣

@carloswriedt3799 4 жыл бұрын

monono monono bro I heard that and had to rewind to hear it again 😂😂

@richeyvalentine 4 жыл бұрын

after i heard that i had a sudden urge to go to Taco Bell

@andresrossi8744 4 жыл бұрын

@@richeyvalentine i became a taco reading this

@nandoavinaalv1372 4 жыл бұрын

monono monono as soon is I heard it I went straight to the comments

@MacktasticSlick_ 4 жыл бұрын

monono monono he’s said it for years on roadkill lol

@catdieselpower193 7 жыл бұрын

dam lol that was one ass kickin 305!! R.I.P

@theprophetez1357 3 жыл бұрын

I had a high performance 305 and it was great. You can actually bolt in a 350 cam and it works great, giving you more power.

@tedbundy2797 2 жыл бұрын

wow that's cool.

@jamieprice126 4 жыл бұрын

this is a kickass video great job keep them coming :)

@jeepcollector91 7 жыл бұрын

I have a crappy 305 sitting around. This video makes me want to throw some money at it...

@TheIndoGod 7 жыл бұрын

JeepCollector91 Not Worth It. Get A 350. i Made The 305 Mistake Once.

@konstantynepayne7168 7 жыл бұрын

240mph UGR Gallardo Same. lots of money on a depressing result

@cesarl3594 6 жыл бұрын

I do the same thing with strippers

@snoopfurlow1275 6 жыл бұрын

It's not worth it.a 350 would be better.more power.tourqe.more pulling power.305 will drink as much gas when pulling a load, often bogs down,more rpms, decrease gas mileage.the 350 with higher rpms, power will pull that load,less bogging.305 is only good for fuel economy

@jdrok5026 6 жыл бұрын

snoop furlow um not absolutely true

@krvs.thewrld5297 7 жыл бұрын

world's greatest drag race 6?

@MotorTrendWatch 7 жыл бұрын

Coming soon!

@GreenAppelPie 7 жыл бұрын

+Motor Trend Channel but not until they spam it up with a commercial about how it's on no demand first.

@mikemorrison3913 7 жыл бұрын

There will be plenty of teasers for it first lol you will see them soon

@catmario9947 7 жыл бұрын

+Motor Trend Channel better have the shelby gt350r and focus rs in it

@looseballs1966 7 жыл бұрын

So what was the dyno numbers before she suffered the melted piston blues

@rafaelsancheziii2885 4 жыл бұрын

My Brother did you grow up in my family. Chingadera! You kill me. Loving it.

@bobelkiniii1461 4 жыл бұрын

You guys make the absolute best videos

@the8jrfan 7 жыл бұрын

I've seen things get blown on your show, I've seen Hookers get beat up badly, next think we know you guys will be PowerStroking in front of all of us. You guys need to get it together. 😜

@ramairgto72 7 жыл бұрын

But the Hookers at least go payed..

@enigmaPL 7 жыл бұрын

They weren't any less effective after the beating though.

@techmaven5900 7 жыл бұрын

Paid*

@techmaven5900 7 жыл бұрын

jonnyjb69 I wasn't talking to you, dicknose.

@ramairgto72 7 жыл бұрын

Lets all be nice... and pass around the Hookers.

@Miguel-od6yp 7 жыл бұрын

13:48 that piano track made me tear up a little..

@sablekimber4591 7 жыл бұрын

I think that's "When Everything Dies" by God is an Astronaught

@JesterNR1 4 жыл бұрын

MT: "How Much Nitrous Can a Stock Engine Take?" Me: "I don't know, BUT I KNOW HOW MUCH I'M GONNA USE!"

@Ky40291MJ 10 ай бұрын

i definitely learned a lot watching this!!! thanks guys!!!

@Lukelins1 7 жыл бұрын

So by stock you mean not stock.

@Heburntmyshake 7 жыл бұрын

lmao

@mikehansen8372 7 жыл бұрын

Basically . . .

@Brjeembr 7 жыл бұрын

He said "bone stock short block" A short block is an engine sub-assembly comprising the portion of the cylinder block below the head gasket but above the oil pan.

@npsit1 7 жыл бұрын

Actually, he said "bone stock SMALL block." The rotating components are stock in the engine which is what would typically fail on an over-nitroused engine.

@MrCWH5 7 жыл бұрын

No, He clearly said "Bone stock SHORT BLOCK"(and its also in the description section) which is what is effected in a nitrous application as there are rarely failures of the valve train contributed to the application of nitrous.

@craigcarnachan7153 6 жыл бұрын

Wow that was Awesome Guys .. I own a 305ci and was good to see how much Power stock mod set up . and Really interesting on No2 .. Over 600hp amazing ..

@bcgrittner 4 жыл бұрын

That was fun. Educational, too. You guys are nuts...but fun. More, more, I want more.

@454bigblock 3 жыл бұрын

Love these guys was grinning and laughing at each results

@unclelane4207 4 жыл бұрын

anyone else watch this just to watch an engine blowup, and was disappointed.

@davidcarder6364 4 жыл бұрын

I wanted to see that thing turn into confetti.

@snikwad003 4 жыл бұрын

And Harry, I need it by tonight

@kartoffelstranger9187 4 жыл бұрын

Blew up many stock engines in my life, was always disappointing... You need lots of boost to make it exciting~

@synarygrose9573 4 жыл бұрын

Yes... but at lest no one or thing is killed

@ViewThis. 4 жыл бұрын

I once had a piston disintegrate, and the rod goes up and down in the cylinder until it pokes thru the side of the engine. I wanted to see something like that.

@thenukeist8350 7 жыл бұрын

if nos doesn't blow up engines people blow up engines . . . dose that mean toaster doesn't toast toast toast toast toast

@lengyeladrian1 7 жыл бұрын

xD that made my day

@uncleputes 7 жыл бұрын

No, people toast toast

@SpockieTech 7 жыл бұрын

Actually, people toast *bread. It isnt toast until it comes out of the toaster. :)

@kg123krh 7 жыл бұрын

seems legit.

@112fail 7 жыл бұрын

YEAH TOAST!

@caseyhill5261 4 жыл бұрын

Probably my favorite episode!

@jamesmacallister2623 4 жыл бұрын

Yall are great at what ya do, jus remember that, made my mornin that much better today lol

@nicowasheremate 7 жыл бұрын

"WARNING:DANGER TO MANIFOLD"

@SouthTexasGhostRider 7 жыл бұрын

Nico Mendoza roflmao

@TotoGeenen 7 жыл бұрын

Nico Mendoza shut up! "Closes laptop"

@michaelboulos8734 7 жыл бұрын

Car stalls and motor fails

@danicalifornia9888 4 жыл бұрын

Monica!!

@HRM.H 4 жыл бұрын

Carb lyfe boi

@jesusvilla12345 4 жыл бұрын

I like the production of the video. It legitimately felt like a TV show or something. You guys also are very user friendly most, if not all, of the terms you used to describe things was simple and not stand-offish. Yeah sure idk what some of the things in the engine were that you upgraded but for the most part you were very user friendly. Are you a shop professor ? Lol

@danielfarthing1717 4 жыл бұрын

Thanks. I know nothing about cars and you explained this in a very simple way for someone like me to understand. Now feel confident putting a NOS into my VW Beetle. Bout to shame some muscle cars!

@NateBlack96 11 ай бұрын

Thank you so much for what you do, David

@greenboyatgafarms2250 4 жыл бұрын

Iv done this with a 350 it did really well with a 200 shot for about a year and probably ran well over a 100 bottles threw it. When I pulled it out it was still running. 😎 Great Job guys👍

@DannySystem 4 жыл бұрын

GreenBoy at GA Farms you did 100 bottles of nos in a year?

@greenboyatgafarms2250 4 жыл бұрын

@@DannySystem well there is 365 days in a year and I was a avid Street racer so yeah it's not hard to go through a Hundred Bottles if you spray a lot

@greenboyatgafarms2250 4 жыл бұрын

@@DannySystem that's a rough idea also so roughly A Hundred Bottles if he did the math it was probably more like 95 92 96 somewhere in that area still I ran a shitload of nitrous through it.

@RichardArcuri 7 жыл бұрын

This was actually awesome and informative. ive seen people run stock caste iron V8's on spray and they last. makes me want to run it now

@burmese434 6 жыл бұрын

Richard Arcuri On race gas and a 250shot on a stock 355 it ran for 3yrs and only thing went wrong is my head gasket. I think it would've been good if I had head studs instead of head bolts.

@ajjohns9571 6 жыл бұрын

lol it was informative how other than showing us that you can run nitrous on an engine upgraded for it since he was nice enough to list all the upgrades on it. Still waiting to see that "bone stock" engine he was referring to.

@josephkutta599 6 жыл бұрын

Always use FelPro blue head gaskets....won't blow stock or cheapies Always will

@jdrok5026 6 жыл бұрын

Aj Johns well the test was the bottom end

@jeepguy4ever30 6 жыл бұрын

aj johns+, he didnt claim it was bone stock and no this engine is not upgraded for nitrous use. its a mild street engine that RUNS ON PUMP GAS and uses pretty much all stock parts besides the cam/lifters. Obviously you know nothing about nitrous which is ok we all gotta learn but you didnt even care to watch the video and learn anything about it either. he talks about the benefits of forged internals in the vid so whats up with that. Properly upgrading an engine for nitrous would have included forged pistons, connecting rods, and crankshaft. along with a wider than stock piston ring gap. please think before you speak. thanks.

@kenswitzer4133 2 жыл бұрын

Impressed by cast crank and rod strength.

@richardhaviland6204 Жыл бұрын

This was very impressive! I have no experience with nitrous and have never watched someone tune an engine with it. Really interesting.

@fraxonthefurry21 7 жыл бұрын

It's funny how we car people can care so much for an engine.

@kenyanr1 7 жыл бұрын

We have to. Most of us ain't got money.

@ramairgto72 7 жыл бұрын

It's a living "thing" to us. Being a PMD guy, Chevy is my mortal enemy, but it's still sad to see one "sent to the chair".

@MichaelSodapop 7 жыл бұрын

I only care about things that belong to me, if someone destroys an item worth thousands it don't matter. However if anything of mine, even if it's only worth a penny gets damaged I'll fucking kill whoever is responsible.

@mikemorrison3913 7 жыл бұрын

Um they care because it took money to build. Do you not care about your things that cost thousands..

@MichaelSodapop 7 жыл бұрын

Mike Morrison I know some punk ass kids on here who do. Completely lost it when one fool in the comments below another video made the claim that a Grand for a PC is cheap.

@claudeladow2334 4 жыл бұрын

I'd like to see what 305 with forged pistons with proper ring gaps, good rods, cast crank and those new edelbrock 305 heads can do.

@omarlagasca7487 2 жыл бұрын

I watched this 5 years after it’s first showing and it’s hilarious

@dvdmulenga9552 4 жыл бұрын

Awesome Video! A thumbs up and Subscribed!

@subsnovideos-ur4cn 4 жыл бұрын

13:27 thank me later

@makern5304 4 жыл бұрын

Thanks

@RougeSanta 4 жыл бұрын

And the MVP award goes to.... @1000subsnovideos

@stefanosiemsen638 4 жыл бұрын

Hero

@EricND223 4 жыл бұрын

It's people like you that make youtube a better place. Good lookin' out.

@alchemist3724 4 жыл бұрын

You rock my guy, thank you

@enriquecruz1330 7 жыл бұрын

"with this chingadera" lmao

@fraire711 6 жыл бұрын

Enrique Cruz Lmao he says that often. When I first heard it I was like wtf.

@ericlopez1133 6 жыл бұрын

Eduardo Fraire never expected him to say "chingadera" haha hilarious

@janjax954 6 жыл бұрын

lmao mexican chingaderas

@shangrel110 6 жыл бұрын

That got Me too

@edgarperez8524 6 жыл бұрын

That was funny

@user-fd7tl4xg6y 2 жыл бұрын

VERY interesting video! Very informative!!! Thanks!

@klausvonschmit4722 2 жыл бұрын

Thank you David! I’m really glad I decided to rewatch this episode for this awesomesauce worth of information but, especially hearing you explain to all the window lickers that chose to call nitrous anything different!

@sodalines 4 жыл бұрын

i dont know about a short block, but my h22a took over a 100 dry shot every friday night for over a year.

@boostjunkie2320 4 жыл бұрын

Dry lol doesn't count

@chasr34 4 жыл бұрын

@@boostjunkie2320 its still a shot fam, technically, it does...

@dan2531 4 жыл бұрын

Just like my wife

@Davidsons_list 4 жыл бұрын

How does dry not count ? That’s harder than a wet hit

@er14de 4 жыл бұрын

this "chingadera" blows up 😂

@benjaminchartier6458 2 жыл бұрын

Gotta love how he bowdlerizes in English by using a Mexican Spanish curse word that every Latino instantly recognizes. Multi cultural knowledge. Now say int in Brazilian Portuguese.....Russian.......German......Arabic

@meheszmezesarpadzsigmond6048 2 жыл бұрын

#13

@geoffbuck6865 3 жыл бұрын

Probably the best production values on KZfaq ...

@isaacray8530 3 жыл бұрын

That was pretty good fellas. Fun to see that old horse blow an aneurism.

@Toobula 6 жыл бұрын

I always wondered what the deal was with the rings not being a full circle and the blow-by through the gap. I had no idea that the worse problem was the gap closing - and that you might need to widen it. Very interesting, great video.

@amagedoncorelone 7 жыл бұрын

WOW free Motortrend content ? WTF?

@texaspoontapper3331 7 жыл бұрын

Rare

@Mrwaffleandmilk 7 жыл бұрын

Well it was obviously sponsored !

@JayP7.62 Жыл бұрын

I want a little 305 like that! I was impressed by the power it made even without nitrous. But I think the 150 shot was a great match for it. Makes me want to build it one! I have a friend with an old S10 I could throw it in.

@PastorJack1957 2 жыл бұрын

A very nice demonstration. I was considering NOS. Now, I'm not. Thank you for helping me make that decision! Knowledge is Power!

@ThatNoFbody-ch9ky 2 жыл бұрын

What? Why not nos is the og brand

@MidnightMechanic 7 жыл бұрын

I really don't understand the hate given towards 305 SBC's, they run smooth, can produce a decent amount of power even if it's a little low, but the real talents are how much fuel economy and mileage 305 cast iron small blocks are blessed with. 263,000 miles on my '92 Camaro's bone stock 305, runs like it's brand new, just warm her up a little and she's ready to rip!

@frequencydecline5250 7 жыл бұрын

..thats all a joke right? decent power, fuel economy, runs like new after warming up...That thing is only getting good fuel economy if you are comparing it to a say a 74 deville...

@GreenJeep1998 7 жыл бұрын

Those and the 307 have always been boat anchors, I'm impressed that it made that much power on it's own, as well as took the lower levels of nitrous........as well as how much money and what parts they dumped into it before it blew!

@entropy156 7 жыл бұрын

well.....it's because they're turds. They weren't even up to the task when they were new, as anybody with a 5.0 Ford of the same era would have demonstrated to you at every available opportunity.

@GreenJeep1998 7 жыл бұрын

You didn't even need a 5.0 Mustang, I could take them down with a 4dr Hatch Lebaron with their early 2.2l Turbo 4 that only good for just shy of 150hp.

@entropy156 7 жыл бұрын

GreenJeep1998 True. Those turbo Mopars were nasty little sleepers.

@kaio37k 7 жыл бұрын

"Completely Stock" ...Continues to list like 30 mods...

@tamapalagi 7 жыл бұрын

intake,carb,cam and vortec heads. that's 4. you can't count

@reyruiz8484 7 жыл бұрын

Reminds me of my co-worker saying he had a "Stock" Firebird with full bolt-ons and $2,000 in suspension bits. lol

@christopherscott6435 7 жыл бұрын

And heads, intake, carb, cam, balancer etc.

@tamapalagi 7 жыл бұрын

the only changes were the heads,cam, intake and carb. the short block is stock. these are typical changes. i would even say the heads are stock since they are vortec castings.

@RealSteelStreet 4 жыл бұрын

It is still basically stock my good man...completely stock short block with stock Chevrolet heads decent cam and intake isn't very much. The point of the video is how much a stock bottom end can take, period. Point well proven!

@johnnynguyen7641 2 жыл бұрын

I love all testing this channel provided 💌

@chase8264 4 жыл бұрын

Dude that rig is dope!

@SIRICKO 7 жыл бұрын

Damn you motor trend i was just about to go to sleep then you post this nice video. =)

@xxibgdrgn5933 4 жыл бұрын

Whenever I saw NOS it will remind me to Brian O'Connor green eclipse 😂

@jonathan-emilypowell1962 4 жыл бұрын

We need to revisit this one!

@timbroski4487 4 жыл бұрын

I'm glad they didn't blew it up completely, very informative video

@storminmymind6059 2 жыл бұрын

Next time I need a stock engine I am coming to these guys for sure.

@Miragedude28 7 жыл бұрын

I find it funny that on the 13th episode, you guys kill an engine.

@Mr6Sinner 7 жыл бұрын

* Twilight Zone music fades in *

@joshua.guevara 7 жыл бұрын

13 likes? Illuminati

@JerZeyFiveOh 7 жыл бұрын

Illuminati confirmed.

@chinchfiles 7 жыл бұрын

+JerZeyFiveOh nah illuminati luv avgas

@michaelnelson7305 Жыл бұрын

A lot to comment on here, but pulling the engine apart and adding turbo pistons, main and head studs with HP valve springs and better head gaskets would give this little hot rod some life on the street with around 600 hp. Great video, looks like fun for sure

@rickyd2222 4 жыл бұрын

This was actually a really good video.

@orlandoaspericueta2534 7 жыл бұрын

I woulda killed for that 305

@traymuse3810 7 жыл бұрын

Orlando Aspericueta buy one

@sergeantspeed5941 6 жыл бұрын

You need a better paying job then.

@bigmike100 6 жыл бұрын

Then you need to raise your standards lol

@dennishensley1150 6 жыл бұрын

Killed what?

@RealSteelStreet 4 жыл бұрын

This particular 305 was quite impressive (for what it is) but you'd be insane to spend a single dime really trying to build one. Hence the reason they grenaded this one instead of a 350!

@cracklingice 7 жыл бұрын

So it's salvageable? Guess that means a revisit with built bottom end.

@thehandlesticks66 7 жыл бұрын

I want a budget NOS build!

@cracklingice 7 жыл бұрын

This WAS the budget NOS build.

@thehandlesticks66 7 жыл бұрын

+cracklingice no it wasn't, they said this was a stock engine not meant for NOS at all.

@cracklingice 7 жыл бұрын

Short block does not equal budget build. Therefore this was the budget build.

@cracklingice 7 жыл бұрын

And it wasn't a stock engine, it was just a stock short block. The cam and short block up are all aftermarket.

@user-xf3kq6uu6b 4 жыл бұрын

It's very useful because there had more cases about NOS Accidents【Street Racing, D1(Drift), Drag Race(0-400/0-1000)】!!

@KC16A6 4 жыл бұрын

I'm not into American engines, but you can feel the love for anything mechanical from these guys so I like it ^^ - emotional video, really ;) Also, it's very informational and comprehensive, subscribed !

@wiseandhumble2470 2 жыл бұрын

What's wrong with American motors?

@KC16A6 2 жыл бұрын

@@wiseandhumble2470 mmm inefficiency and reliability issues for starters ;)

@midsouth2strokes185 3 ай бұрын

@@KC16A6 Wow I think we all got dumber from your comment.

@midsouth2strokes185 3 ай бұрын

Your on the wrong channel English Muffin. This is all American iron on this channel

@KC16A6 3 ай бұрын

@@midsouth2strokes185 nah... you had already reached a depth impossible to beat you're on your own, there, buddy 🤣🤣🤣 also, from your grammar skills, I can safely assume you're a fine specimen of Southern inbreeding lmao