How Thrashin Supply Pullback Risers Changed My Ride (all parts links in the description)
Рет қаралды 1,362
Күн бұрынAfter 500 miles I review the Thrashin Supply 9.5" pullback risers, high bend bars, and solid riser bushings on my 2024 Harley Davidson Road Glide. Join me for this product review as I tell you my thought about the @THRASHIN Supply risers, bars, and bushings I recently installed on my 24 Road Glide. I will also tell you my thoughts on the customer service I received from both @THRASHIN and @2LaneLife during this process.
Link to the parts I did:
2lanelife.com/collections/202...
Link to the parts at Thrashin Supply:
Risers: www.thrashinsupply.com/collec...
High Bend Bars: www.thrashinsupply.com/collec...
Solid Riser Bushings: www.thrashinsupply.com/collec...
Riser Mounting Hardware: www.thrashinsupply.com/collec...
Video content
0:00 - Intro
1:00 - Stock setup and why I changed
2:03 - Fit and Finish
3:15 - The solid bushings and how they effect the ride
4:07 - Thoughts about hand position with these bars
4:44 - Fitment for me
5:50 - Customer service @2LaneLife and @THRASHIN
6:50 - Fitment on the bike
8:10 - Final touches from Harley Davidson
9:15 - General opinion about the bars and why I didn't change the grips
10:57 - Summary and final thoughts
11:41 - Outro
@teddyvargas9511 Ай бұрын
Nice setup. I agree. I’m 6.1 the mid bend was to short. The high bend is the way to go so comfy for 6.1.
@jst_moto Ай бұрын
@@teddyvargas9511 thanks for commenting and watching!! It is the right setup for me for sure. Always ride safe.
@bryanhodges898 Ай бұрын
For me it was the angle of the factory bars that would hurt my wris, The only problem I have with my 9.5 risers and mid bend bars is that I want to corner very hard and basically thrash around alot
@jst_moto Ай бұрын
@@bryanhodges898 do you find you can’t ride your bike that way with this setup? I find the handling 100% better especially after replacing the bushings. Thanks for watching and commenting. Always ride safe.
@trafficon2wheels Ай бұрын
cool video
@jst_moto Ай бұрын
@@trafficon2wheels thank you for watching and commenting. Always ride safe!
@CP-bm9vs Ай бұрын
Do you have the part number for the trim piece? Love the look of these bars on your bike!
@jst_moto Ай бұрын
@@CP-bm9vs I do not yet. I’m going in person to identify it. Probably make a short video unboxing and installing it so keep checking back. Thanks for watching and the comment. Always ride safe.
@CP-bm9vs Ай бұрын
@@jst_moto awesome! I’ll keep an eye out for the vid.
@Xi_Cano Ай бұрын
I just got this set up Waiting to install new on 2024 cvo st
@jst_moto Ай бұрын
@@Xi_Cano thanks for watching and commenting. I did do an install video on them that came out on the channel 6/18/24. In that video I also link the Thrashin supply install video and 2 lane life install video. You’re gonna love this setup. Always ride safe!
@asoshkin 23 күн бұрын
I have a cvo at. Can I ask what size risers and bars you get. The cvo st bars sit lower than the stock road glide. I was thinking going 6.5 on risers with highbend bars to make sure I don’t need to get any longer cables. Let me know. Thanks
@jst_moto 23 күн бұрын
@@asoshkin I did the 9.5” pull back risers with high bend bars. In 6’ with a 31” inseam so my torso is longer. This setup is perfect for me and puts my hands at the same height as 14” meat hooks (so 12” bars). Thanks for watching and the comment. Always ride safe!
@asoshkin 23 күн бұрын
@@jst_moto This the way I would go but unfortunately the 24 cvo st has a shorter stock setup than the regular 24. So I am not sure if I will have enough without doing longer cables and wiring.
@jst_moto 23 күн бұрын
@@asoshkin ask Thrashin. They are pretty responsive.
J St. Moto
Рет қаралды 6 М.
Khabar SPORT
Рет қаралды 368 М.
Just Kill'n Bugz
Рет қаралды 12 М.
The Bearded Mechanic
Рет қаралды 384 М.
Just Your Average Joe
Рет қаралды 2,3 М.
Traveling Tall
Рет қаралды 152 М.
jamoloniy
Рет қаралды 2,1 МЛН
Доступное право. Юристы
Рет қаралды 1,5 МЛН
HOWO.UZBEKISTAN
Рет қаралды 4,6 МЛН
Hammabop ustalar.
Рет қаралды 1,5 МЛН