How to Activate and Add Hikvision Device to iVMS 4200 via IP Mode
Рет қаралды 195,703
4 жыл бұрын
@4300rick Ай бұрын
for some reason the program shows my device as offline. I deleted it to reinstall it. the problem I have now is that the program sees it offline and when I try different settings I get the error *name of the device* does not have enough rights (HCNetSDK.dll[13].). However everything works via the web page and the NVR application. What to do to make it work again with the iVMS-4200 program
@hikvisiontechnicalsupport6367 27 күн бұрын
Dear customer, please ensure that you have added the device using an admin account. If you have not, you may encounter issues. For further assistance, please contact local support team. www.hikvision.com/en/about-us/contact-us/
@taiyotech Ай бұрын
Thank for the video. I have a question. How can I find the online device, but in different subnet, in the same local home?
@hikvisiontechnicalsupport6367 Ай бұрын
Dear customer，to detect online devices you should ensure that the device you wish to detect is connected to the same Local Area Network (LAN) .If the device is on a different subnet, it will not be detected by iVMS-4200.
Hik-Connect Hikvision
Рет қаралды 53 М.
Pk Technical Knowledge
Рет қаралды 4,4 М.
Jason Derulo
Рет қаралды 30 МЛН
DORIS CCTV
Рет қаралды 209 М.
techlaboratoryru
Рет қаралды 5 М.
CCTV Camera Installation with NVR | IP Camera, Hikvision NVR & PoE Switch Complete full Installation
Cisco Config
Рет қаралды 1 МЛН
Hikvision Technical Support
Рет қаралды 1,1 МЛН