How To Add Blade Styles & Fonts To A Proffie Lightsaber THE EASY WAY | Proffie OS Online Editor
Рет қаралды 40,290
Күн бұрынA not very quick tutorial on how to use the new Easy Proffie Customization tool for your Proffie Lightsaber. Before attempting ANY customization, whether it be using this tool or the config & style editor method, PLEASE make a back up master copy of your SD Card, I cannot stress how important this is!
Let me know about YOUR experience with this tool down below in the comments! Any questions you have feel free to also post them below!
Thanks For Watching!
Please Like, comment & subscribe!
**TUTORIAL STARTS AT 3:36**
LINKS
**CHEAP LIGHTSABER WALL MOUNTS I USE**
amzn.to/2RxlHvC
Absolute Sabers Discord
/ discord
Absolute Sabers Instagram
/ absolutesabers
Lightsabers Reddit 100k+ Members
/ lightsabers
Lando Sabers - How to add sound fonts to proffie board (config method)
• How to Add Soundfonts ...
Fett263 Channel (For OS6 Demo & EVERYTHING PROFFIE)
/ @fett263
Easy Proffie OS Tool
fredrik.hubbe.net/lightsaber/w...
LINKS TO TRUSTED COMPANIES
Padawan Outpost Saber Store
www.padawanoutpost.com
Crimson Dawn Saber Store
www.crimsondawn.com
Dark Wolf Saber Store
www.darkwolfsabers.com
Electrum Sabercrafts
electrumsabers.com
Sabertrio
www.sabertrio.com
Vader’s Vault
www.vadersvault.com
Korbanth
www.korbanth.com
KR Sabers
www.krsabers.com
Saber Forge
www.Saberforge.com
LINKS FOR SOUND FONTS
KSith Saber Fonts
www.ksithsaberfonts.com
Kyberphonic Saber Fonts
kyberphonic.bigcartel.com
Saber Font
www.saberfont.com
#proffie #lightsaber #neopixel
@highlightshadow 3 жыл бұрын
One thing to bear in mind with picking colours... remember you're dealing with LED light power... so while say a "pure white" blade for a Ashoka Tano / Dark Saber might look nice at 255/255/255 -- it means it's running the LED's at full power all the time and that when you do clash/lockup/blast etc they cannot go brighter than they already are.... So for example, my Ashoka Tano colour i run 180,180,210 - which is very slight blue tint but overall fairly white but gives the LED's about 20-30% of their brightness for clash. A strong red colour for example is only running something like 128,0,0 which means it runs the LED at 1/2 power and gives plenty of additional brightness available for effects. Just a little tip to bear in mind .... as i noticed for your green you used 0,255,0 which means you're running the green LED at full tilt. Again, it's possible but drains batteries quicker and gives no spare brightness for effects on that colour.
@AbsoluteSabers 3 жыл бұрын
Yeah mate your bang on with that, something to keep in mind for sure, if youre using white as a clash or lockup colour then no issues unless your main blade colour is white like you said. Also just had to configure this for code fulcrum sound font from kyberphonic and wen the same route as you in giving the white blade a blue hue to it. Looks Dope too!
@highlightshadow 3 жыл бұрын
@@AbsoluteSabers Is code fulcrum a CW based ashoka or something -- can't quite make out what the voice says on the font announce. For Ashoka i use "The Sourcerer" from Kyber as it's a mandalorian one and very very sweet..... having said that are any of KSith/Kyberphonic fonts NOT amazing :D
@AbsoluteSabers 3 жыл бұрын
@@highlightshadow i'm sure is a Rebels based Ahsoka font bro it's my preferred one personally but this is what's great about our community is everyone has different taste! IKR Kyberphonic & KSith are the GOAT!!!
@Tome1492 3 жыл бұрын
This is great advice. Thank you
@chrispetro4463 2 жыл бұрын
Just tried your suggestion and turned down the solid-colored blade styles to 128 from 255...you're right, clashes look better and no noticeable difference with the blade color. Like that this also saves power and extends the battery life - thanks for the suggestion!!!
@christophergiachetti1133 3 жыл бұрын
Thanks I’ve been looking for somebody who can explain it in a way I understand, this helps so much, I can finally add to my saber, also I’m pretty sure we both use dark wolf
@AbsoluteSabers 3 жыл бұрын
So glad that the vid helped you bro! What fonts to you have to add?
@christophergiachetti1133 3 жыл бұрын
@@AbsoluteSabers I haven’t added anything yet cause I’ve been busy, but I have it at a point that I can when I’m ready, I’m hoping to get mace cause I really want a non crackly purple, and a white Ashoka saber
@AbsoluteSabers 3 жыл бұрын
@@christophergiachetti1133 the mace sound font from ksith is great, just play around with the purple/pink on the blade to get it right for you. Also, kyberphonic does a couple real good Ahsoka fonts too, code fulcrum is my fave but he also has commander tano which is still kickass!
@davemahan1993 4 ай бұрын
This is amazing. Thank you for posting this! I don’t have a ton of time to figure out configs and this is a good way to play with some options.
@jpg334 3 жыл бұрын
This is going to be a lot of help for me, thanks for doing this video it was very informative I am going to have a lot of fun with my Proffie lightsabers when I get them
@AbsoluteSabers 3 жыл бұрын
Glad you found it helpful my friend! Thanks for watching!
@paulallas7665 3 жыл бұрын
This is a brilliant video. I gotta get this program and learn how to edit the fonts on my Proffie sabers. Am new to this so I've lots to learn. Any assistance is always welcome and this tutorial is what works best for me at this early stage. Thanks for the vid Ab Sab.
@AbsoluteSabers 3 жыл бұрын
thanks Paul! more than happy to help! glad it put you in the right direction!
@paulallas7665 3 жыл бұрын
@@AbsoluteSabers Just showed the missus and she loves your Scotty accent. She's the computer expert in this home and she will be doing the customizations for the time being. She also now has the Princess Leia Crimson Dawn Eminence. She deserves the most elegant of the Lightsabers.
@ClauZenberger 3 жыл бұрын
This looks awesome! Gotta try it when I get home. :)
@darthrebound7235 2 жыл бұрын
I love your accent! And amazing educational video, thanks for the help!
@icewolf371 2 жыл бұрын
Thank you for this video. Liked, Commented and Subscribed. 👍
@Tuhqa 2 жыл бұрын
Yeaaa baby a proffie tutorial 😎
@chrispetro4463 2 жыл бұрын
I've watched yours and a few other videos on the "long" way of adding/programming new fonts and blade styles, and while it looks like that way gives you so much more control on how the blade looks, it is WAY too involved and confusing for me, and I'm just not into wiping the config and replacing it every time I want to add another blade style, so I am VERY thankful for this method that you posted! That said, I've run across an issue that I'm not sure if i am doing something wrong, or is just one of the bugs with doing this the "Easy" way....I've noticed that the color changes you select don't always translate to the blade. For example, I am installing a Qui Gon blade style, and using the "standard" set-up, the blade lights up green if I use Red = 0, Blue = 0, and green = 255. However, I want to lighten the blade up a little and when I use the color wheel above and set it to a lighter green, the blade lights up white, no matter how little or much I change the level of green in the program. In addition, the clash is set at white, but is clearly pink on the blade. I have the same issue when I use the "Advanced" and "Unstable" settings. Have you experienced this too? If so, were you able to get around this, or does this appear to be an issue with the program? Thanks much for your videos and help!!!!
@AbsoluteSabers 2 жыл бұрын
Best thing to do is to use a rgb colour picker on google and play around with some values on the rgb as some of the features are still in development from what I know as they are going to use this online program for the new OS6 for proffie
@overkillphil514 3 жыл бұрын
This is brilliant, so much easier. Thanks! Subscribed! Liked!
@AbsoluteSabers 3 жыл бұрын
Thanks for subbing! Glad the bid helped! Will have an easy to follow tutorial coming soon on how to do the configs, blade styles, use arduino etc so stay tuned! 🤘
@overkillphil514 3 жыл бұрын
@@AbsoluteSabers Will do. I got my first saber recently, but the design is quite basic. So I ordered a Saberforge Exalted Mk2 but can't find who makes their sound boards.
@AbsoluteSabers 3 жыл бұрын
@@overkillphil514 I believe they use the golden harvest v3 boards mate, they may use another board for their lower end builds such as single color led with sound but im pretty sure theyre still using tht GHV3 board for their hero tier installs.
@overkillphil514 3 жыл бұрын
@@AbsoluteSabers OK thanks. I did make sure I'm getting a Neopixel with all the extras and 25 fonts. I just wanted to know if I could add to the SD card.
@bradorem121 3 жыл бұрын
So far you're the only video i found explaining the difference between xenopixel and neopixel
@AbsoluteSabers 3 жыл бұрын
Thanks man, I do try to be as up to date and current as I can be. A lot of confusion between the names of boards and blade tech etc but the Xenopixel is the name of the soundboard which actually only comes with the option of a neopixel blade and not in hilt rgb unlike the proffie board that can come in both in hilt or neopixel configurations, saying that, the neopixel option is the only way to go if you have a proffie board in my opinion! Glad I could help with this! Thanks for watching!
@bradorem121 3 жыл бұрын
@@AbsoluteSabers yea me leia im waiting on is my first neopixel after seeing almost every vid there is on leias dw saber and neopixel sabers nothing but good stuff.Only saw one bad vid and it was where the guy got it from which was why he was having issues with his neopixel.Had a buddy ask me whats the difference was between xenopixel and proffie told him its the soundboard configuration and the priffie can do something the xenopixel cant(grasping at straws) as far as that i have no clue lol.
@AbsoluteSabers 3 жыл бұрын
Yeah so you can configure custom blade styles with the proffie board for any sound fonts you add. The Xenopixel can still add sound fonts, see my other video, but can’t update blade styles or customise any blade styles. That’s the only real difference! But when OS6 is available for proffie then that will change the game. It will bring the customisation features into the board itself so you can play around with pretty much every aspect of how the saber behaves without having to rewrite the config file over and over, or so I’m lead to believe! Hope you enjoy your Leia, it’s a great saber, nice display piece also!
@bradorem121 3 жыл бұрын
@@AbsoluteSabers speak of the devil just recieved a text from dhl sayong my package is in route to my house and should be here today hell yeah!!!
@AbsoluteSabers 3 жыл бұрын
Did you get your saber through? Hope you’re enjoying it! 🤘
@Benno288 2 жыл бұрын
Thanks for all your videos they're really helping me with decide which lightsaber I should get for my first. Is there somewhere I can ask you 2 or 3 questions before I order a saber?
@AbsoluteSabers 2 жыл бұрын
dm me on instagram buddy
@imadazler9891 Жыл бұрын
A nice Scottish guy explaining this so easy amazing 👍
@paulantonas 2 жыл бұрын
You're awesome buddy :)
@AbsoluteSabers 2 жыл бұрын
Thanks Paul!
@snarkbark2714 3 жыл бұрын
Do you have a video on upgrading the OS of the proffie to get newer blade styles
@AbsoluteSabers 3 жыл бұрын
Not yet but I will be doing one soon!
@chrispetro4463 3 жыл бұрын
Thank you SO MUCH for posting this video! I just added several fonts with your help! A few questions though...When I go to edit the blade style and choose "Advanced," it completely screws up the "Lockup"...instead of putting the color of the lock-up in a small section of the blade, it changes the whole blade, whether it be the default white color or whatever else I choose. Everything else looks great, except for that, so I have to choose either use the Advance edit and mess up the lockup, or use the other 2 options but not be able to get the timing and clash colors I want, etc. Am I doing something wrong when I'm using the Advance edit that is messing up the Lockup, or is that a flaw in the Easy Prorffie OS program? Again, thank you - the Arduino method of making changes is so intimidating that there is no way I would have been able to do this - so much appreciation!!!
@chrispetro4463 3 жыл бұрын
Just tried making changes with the "Advanced" editor on a copy of a blade style where the Lock-Up produces a localized color change, and the same thing happened...the entire blade now changes to the color on the lock-up, instead of just a localized color change, so it appears that this Advanced Editor is the source of the issue. I tried all the different available settings and nothing worked, so it appears you have to accept the trade-off of either a less-realistic Lock-Up for color, timing, spark-tip, etc. control, or localized Lock-Up but no ability to change those other items. That's a shame, because I really like the change on the clash...I made it a pale yellow, like in the original trilogy, and it looks awesome - even better than what was originally programmed. Oh, well, given how mind-blowingly awesome these proffie/neopixel sabers are, it's a minor issue, and maybe one that will be corrected when OS6 comes out.
@blake_1146 2 жыл бұрын
Does it add fonts, I though it was just editing them
@07freshkid70 2 жыл бұрын
Is there a way to swap out the red ignition switch on the saber for like a blue or green illuminated switch. Is there a place I can buy a different one. The red is nice but I want to customize the illuminated on/off switch to something different.
@omegaadam474 2 жыл бұрын
You need to connect to the USB port on the proffie board My saber didn’t come with a Luke front from ROTJ and that’s one of the fonts needed on my saber. Because it’s Luke’s ROTJ saber
@TheWildRacco 2 жыл бұрын
Does this app allow you to change and add sounds to the fonts on the saber other than the music tracks (font selection, pre-on, ignition etc..) or is it mostly for blade styles and colour that you can edit?
@AbsoluteSabers 2 жыл бұрын
You can add sound fonts but you can’t do pre ons or ignitions, only blade styles. I know that there will be a version of this software for proffie OS6 that will be able to utilise a lot more than what this version does
@scbluesman13 2 жыл бұрын
Thanks for the great video! Just curious, what software are you using for that splitscreen?
@AbsoluteSabers 2 жыл бұрын
Thanks dude! Screen record on the pc and recorded the exterior shot on phone, matched everything up in iMovie 🤘
@scbluesman13 2 жыл бұрын
@@AbsoluteSabers Ahh, right on. Thanks!
@astonmartin5332 3 жыл бұрын
Can't get the computer to recognize the saber with the SD card kill key is removed and I'm using a rankie data transfer cable . Not sure I'll have to Google how to remove the battery
@newhappiness4410 13 күн бұрын
I’ve been following your tutorials and I’m a Proffie virgin so I’m new to this. This video looks so straightforward so for me the first way to go. Can you tell me if the bugs have been ironed out in this versionI know it’s been awhile?
@AbsoluteSabers 13 күн бұрын
Proffie always had bugs my friend, I would definitely suggest looking at my other Proffie tutorials and learning the full process
@newhappiness4410 13 күн бұрын
@@AbsoluteSabers I love Proffie ,sorry I meant to say the online app if the new version is less buggy from your video as I know it’s been a while?
@tasheemthedream4199 2 жыл бұрын
can you please tell me why whenever i eject my sd card, and try to plug the micro usb back in it doesn't inject the sd card again? the only way for it to inject my sd card again so i can add fonts to it is by going into the arduino app and re applying a config to the sd
@noc2555 2 жыл бұрын
Questions, How do you plug in the proffie board into your pc? do you remove the sd card and put it in through a usb? and plug in the micro usb to the pc?
@AbsoluteSabers 2 жыл бұрын
Yessir, although you don’t need to remove the sd card
@jakebassett6206 Жыл бұрын
Noticed you had an option for RAINBOW in your blade selection. Is that something you put in somehow or was it an option on the site when this video was made? Any input or help would be greatly appreciated! Thanks so much for the video!!!
@AbsoluteSabers Жыл бұрын
Yeah it was already an option mate, I haven’t used this tool in a while so I don’t know if things have changed on there
@blake_1146 2 жыл бұрын
Questions 1. The soundfonts showing on the website, are they the soundfonts that are in your lightsaber? 2. Is it only the colours and blade styles that change and not the sound?
@AbsoluteSabers 2 жыл бұрын
So yeah they are the ones that are currently on the saber mate, you can add new fonts with this too, just follow the video everything is there
@poopa911 Жыл бұрын
I have a quick question. This is by far the best tutorial I have seen so far for this, however I'm a little cautious to proceed as when I connect my USB to the saber, the proffieboard isn't showing up under the devices tab on the windows menu to know if the SD card is mounted. Am I doing something wrong for it not to show up?
@AbsoluteSabers Жыл бұрын
Unfortunately that means the board wasn’t set up for web usb and serial interface when it was programmed, you’ll need to do it the traditional way buddy, I have a 4 step proffie guide on my channel to help you
@poopa911 Жыл бұрын
@Absolute Sabers Thanks for the quick reply! Unfortunately about a second after I posted it my saber fell from my desk and the MicroUSB port was ripped off the Proffieboard and I have no idea how to fix it.
@grogu9906 2 жыл бұрын
oh my god im the one thousandth sub!!
@AbsoluteSabers 2 жыл бұрын
Thank you!!!! 🤘🔥🤘🔥🤘
@derekneese9497 2 жыл бұрын
I'm following the instructions and it's working for the most part save for a small issue. When I add a new font, my saber will say "font directory not found" at the same time as the font startup sound when switching to that font. However, the font itself still turns on and works fine. Any fix ideas?
@AbsoluteSabers 2 жыл бұрын
That’s definitely a new one, never experienced that before. I would delete it and add it back again, see if that fixes it
@somadokuro9156 2 жыл бұрын
Can I do this with any proffie neopixel lightsaber?
@hunterrowe2181 3 жыл бұрын
Should I leave the battery in or take it out? sorry if this is a dumb question but I want to make sure i do this right.
@AbsoluteSabers 3 жыл бұрын
Battery needs to be in for this editor to work ✌️
@tuskenknight6374 2 жыл бұрын
Still scard to get profie. Hopefully I’ll be able to aford a savertrio when they open.
@kodiecomeaux2267 3 жыл бұрын
So when i plug up the saber it finds it and it gives the option to connect but when i press connect it the menu goes away as if it connected but it doesn't do anything. Any idea what could be the problem?
@AbsoluteSabers 3 жыл бұрын
Sounds like web usb interface may not be active on your proffie board. What browser are you using? I found chrome best to use. If you are using chrome already, I think you would need to reflash the board unfortunately.
@Kratos510e Жыл бұрын
does the cable connect to where I charge the saber or does it connect to the small port on the proffi board? Also what type of cable? Like a USB -C?
@AbsoluteSabers Жыл бұрын
To the micro usb port on the proffie board by using a micro usb data cable
@danyalshahzad9573 3 жыл бұрын
What if you buy a custom one can we easily throw it on this program and have a complete custom font ?
@AbsoluteSabers 3 жыл бұрын
Define “custom one” like pre on effects, post off effects?
@jacobdouglas5649 2 жыл бұрын
Does this delete any of your soundfonts/blade effects when you use it? I'm worried if it'll take away my proffie settings.
@AbsoluteSabers 2 жыл бұрын
No my friend, it just adds to it, unless of course you delete something which is possible to do also
@ashleysynan6058 2 жыл бұрын
Can I do this with a LGT profile core? I’ve just purchased one from Padawan outpost.
@AbsoluteSabers 2 жыл бұрын
Absolutely!🔥🔥🔥
@swishstudiosrblx Жыл бұрын
I watched this video a couple months ago, and tried it. It was working at first then my battery was placed the other way and it fried my saber. Ronin fixed it but Im scared to do it again even with battery in correctly, should I?
@AbsoluteSabers Жыл бұрын
Only advice, don’t put the battery in the wrong way my friend
@krystianrzepecki1154 2 ай бұрын
This turorial is amazing! I will definitely use this on my proffie saber which is currently on its way. Can you also customize crossguards with this? Lets say edit a side vent delay? Do you have experience with proffie crossguards? For example how to name the proffie folder file for those and naming the side vent sound files? Many thanks in advance!!
@AbsoluteSabers 2 ай бұрын
Yes there is a newer version of this now available buddy it does a lot more than the older version I demonstrated
@krystianrzepecki1154 2 ай бұрын
@@AbsoluteSabers that's great looking forward to it, thanks! Is it the same page/link just updated? Or is it some other page? Thank you again for your awesome videos, I've learned a lot and they're perfectly not overcomplicated :)
@AbsoluteSabers 2 ай бұрын
@krystianrzepecki1154 I think it’s the same link but your can try fett263s website too 🤘
@krystianrzepecki1154 2 ай бұрын
@@AbsoluteSabers so my 3.9 proffie saber arrived yesterday and unfortunately I've got the "no webUSB" error like many others. I've looked into a bunch of videos (mostly yours) which are really great but is there a really simple option for newbies like me to just enable the webUSB for the board without all the programming? Or is your 4 steps video the perfect way? I've seen the option to add the "mass storage+ web usb tool" in Arduino, can only this work? Or should I really do it completely step by step to finally enter the easy web editor?
@AbsoluteSabers 2 ай бұрын
@krystianrzepecki1154 unfortunately to my knowledge buddy the only way to enable it is to do so via the arduino software. The easiest way to do it would be to just use the existing config that came on your saber, there’s usually a copy of it on the sd card, that way you’re not changing anything except the webusb option
@bosje262 2 жыл бұрын
It seemed to work for me. But when pressing on the edit button (pencil icon) it cannot find the options on the edit column. It gets stuck on "getting options..."". Any thoughts?
@tasheemthedream4199 2 жыл бұрын
did you ever find the fix?
@skyxskywalkur7212 3 жыл бұрын
I don’t know why I’m even watching I don’t even have a computer 😂 I really just want to install the sorcerer font big fan of Din Djarin
@spencergray4092 3 жыл бұрын
I just purchased my first Proffie Saber and i was wondering if this same program would work on a removable chassis. The saber is the Ulitmate Works RVS. Just wanted to know if i still have this as an option for editing styles.
@AbsoluteSabers 3 жыл бұрын
If it’s a proffie soundboard then yes. Good choice in saber by the way, I have the asteria RVS, gorgeous hilt, you’ll love it ✌️
@spencergray4092 3 жыл бұрын
@@AbsoluteSabers oh thank you!. Since i know you have the the RVS i have 1 more question for you. I bought it from the PachStore and it says it comes with a cord for charging. Is it ONLY a charging cord or can it be used for data transfer as well?
@AbsoluteSabers 3 жыл бұрын
@@spencergray4092 I haven’t tried using it for data transfer, my advice is pick up a micro sd card reader, they’re not expensive, better way to transfer files to the sd card, quicker too!
@ricardomilos4261 2 жыл бұрын
Hi, Im new to lightsabers and Programming these but I just got an lightsaber for the first time and now I’m eager to Programm it. But the website just says in the top left corner when asking for an proffieboard that there’s an proffieboard and not one that is paired/connected. I can’t really figure out why my pc doesn’t want to pair as the proffieboard is shown but not as connected and it doesn’t give me the option to pair. Please Help :(
@AbsoluteSabers 2 жыл бұрын
the board may not be configured for web usb my friend, you will unfortunately need to learn how to flash your board with a new config, or if you have a copy of your current config. There are several videos on how to do this on youtube, I should have one up in the next week or so.
@RobtsaTV 3 жыл бұрын
What sound font is the Luke Skywalker one please? I have ESB sound font but it doesn't have the font wav file that just says "luke skywalker" like yours when you make the changes
@AbsoluteSabers 3 жыл бұрын
The Luke skywalker one I used in this video is called “LS6” by Ksith saber fonts.
@RobtsaTV 3 жыл бұрын
@@AbsoluteSabers excellent thank you love that font I've purchased some from K Sith already so guess I'm going back again now thanks again for the reply 👍
@fatmonkey46 8 ай бұрын
So do I keep the battery and Sd in the saber while editing ?
@tavissss_ Жыл бұрын
Hi, do you know what should I do to fix the no webusb interface found problem? I'm using chrome as the browser and a data cable to connect to my sabertheory's saber, but the webusb is not working.
@AbsoluteSabers Жыл бұрын
It may not be setup for web usb access unfortunately, some are straight out of the factory and some aren’t. You’ll need to follow my 4 step proffie guide
@AgeingRaver 2 жыл бұрын
Hello again. Just wonder if this is still relevant today. My golden harvest saber went back to be replaced as it was faulty. Seen padwan op had new stock of proffies and couldn't resist and purchase the rev1. Thought best look up how these this work.
@AbsoluteSabers 2 жыл бұрын
Yes you can still do it this way but I would encourage you to follow my other 2 proffie tutorials to learn properly as it will give you a much much better experience
@thearchitect3860 3 жыл бұрын
4:17 - how can you make your proffie board WebUSB compatible? i’ve tried to find other videos but struggling at the moment
@AbsoluteSabers 3 жыл бұрын
kzfaq.info/get/bejne/nKeemsqeuc6qZHk.html watch this video bro, it’s where I learned how to do everything with the proffie board, pay attention to the part where he uses the Arduino software and you will see what settings to use before you flash the board. The video is long but watch it start to finish and everything will make sense, it’s very good at explaining everything and breaking everything down for you. Hope this helps, sorry I haven’t got a video on this yet, I’ve just had to replace my editing computer in the past few days and haven’t been able to make any new content
@thearchitect3860 3 жыл бұрын
@@AbsoluteSabers thanks, the video really helped. one thing, do i really need to flash my board? or can i just download arduino and zadig and ensure my proffie is WebUSB compatible?
@AbsoluteSabers 3 жыл бұрын
@@thearchitect3860 if you try and use the web editor and it works then no need to flash your board. If it doesn’t work then unfortunately you will need to reflash your board
@rain.raiden777 Жыл бұрын
Hi I would like to ask you something a few days ago I saw in a tutorial a simple method to change fonts on proffie or open a folder on the sd card leave the name of the folder unchanged but replace everything in it with the new font .... I tried and it worked only that the speaker on those fonts that I changed tends to croak the sound can you tell me why and if it is solvable? on the other fonts it feels good ...
@AbsoluteSabers Жыл бұрын
Could just be the font itself buddy
@chrispetro4463 2 жыл бұрын
I've purchased several extra sound fonts, mainly from KSith, but also from a few others. When transferring those fonts over to the SD card, I've noticed there is a folder titled "Extras" with a sub-folder titled "Quotes." I drag the "Extras" folder over but I can never seem to access the various "Quotes." Is that "Quotes" sub-folder actually supposed to be pulled out separately from the "Extras" folder?" How are those "Quotes" accessed when using the saber? During start-up? Force?
@AbsoluteSabers 2 жыл бұрын
So don’t drag the folder out, infact the extras folder doesn’t need to be on the sd card at all. You can use these files as alternative font selection, boot, preon sounds 🤘
@chrispetro4463 2 жыл бұрын
@@AbsoluteSabers Thank you for the quick reply! Will give it a try. BTW, saw one of your reviews on Padawan Outpost....had never run across them with my Google search (I wonder why?), so I went to their site after seeing your positive review. Looks like some great sabers (both quality and amount available), and the prices, even with higher shipping to the U.S., were better than anyone else by far, and I've been doing a lot of searching the past 3 weeks. Also, everyone else seems to have a hard time getting Proffie (Dark Wolf, who I bought from before and wanted to buy from again, doesn't even offer Proffie anymore). Ordered a Graflex saber for an outstanding price - thanks to your review, otherwise i would have never known about them.
@AbsoluteSabers 2 жыл бұрын
@@chrispetro4463 so padawan outpost are just a reseller of LGT buddy as are Darkwolf except Darkwolf are an actual business partner of LGT. LGT have stopped proffie and are moving to GHv3 for a while hence why darkwolf no longer show them on their website, HOWEVER, the current stock of proffie Sabers that padawan outpost has will be their LAST proffie stock so grab one while you can, use my code ABSOLUTE5 for a discount 🤘
@chrispetro4463 2 жыл бұрын
@@AbsoluteSabers Oh, yeah, I forgot that part...I did a discount search before buying the saber and found your discount code, and got an extra $20 off of an already great price - paid for most of the shipping! Thanks again for your review and partnering with them for the discount code - I saved a lot for what looks to be a great purchase!
@hamoodyman9239 2 жыл бұрын
Stupid question. but I mounted my sd card. But how do I get to where I'm able see the sd card again (unmount it?) in order to add files.
@AbsoluteSabers 2 жыл бұрын
You’d be best to add files to the sd card via a micro sd card reader if I’m honest. Adding files via the micro usb cable can be problematic buddy.
@BRJ5 3 жыл бұрын
Mine lets me pair the board when I click USB, but after that it just sits on the screen, Ive clicked USB multiple times and nothing works. I have reflashed the board twice as well
@AbsoluteSabers 3 жыл бұрын
have you selected web usb on arduino when reflashing the board?
@BRJ5 3 жыл бұрын
@@AbsoluteSabers Yes, I got it figured out, thanks though!
@goimei 3 жыл бұрын
@@BRJ5 how did you do it
@RD-wf6yd 2 жыл бұрын
hi i saw the lando sound font tutorial is using proffie os 5.7 and this is os 6 do they work same ?
@AbsoluteSabers 2 жыл бұрын
Please watch my latest video on proffie OS6, there are some slight differences buddy, but mostly the same, also, watch till the end to see how to add fonts easily too
@marcelluswhite5920 Жыл бұрын
Can I get some help? What if you delete the folder? I still have the light up but no sound.
@AbsoluteSabers Жыл бұрын
What folder did you delete?
@huntergordon8150 Жыл бұрын
Do I need an SD card reader as of now? or can I still do this without frying my board
@AbsoluteSabers Жыл бұрын
Sd card reader is always useful for transferring fonts, sometimes the proffie board doesn’t like doing it through micro usb
@Tome1492 3 жыл бұрын
Hi. Sorry if I missed this in your video but is there a way to adjust the volume using this web portal? Or do I have to manually go into the config files. Thank you. great video it’s been very helpful
@AbsoluteSabers 3 жыл бұрын
You would need to go into the config unfortunately, the web editor does allow you to manipulate the volume but that’s only for when the board is connected for demo purposes. Also, if you press your power Button and it the hilt simultaneously it will enter volume advisement, a quick press turns the volume up and a 1 second hold/release will turn the volume down, you then hold the button and hit the hilt again to exit the volume menu. Hope this helps!
@Tome1492 3 жыл бұрын
@@AbsoluteSabers Hi. Well, I got an email for Randy at Korbanth Support and he said that the only way to change the volume is to use the Arduino software. Your suggestion didn't seem to work, but maybe I didn't do it correctly. Or maybe Korbanth made a custom change to the config. Either way, I really appreciate your help and the video.
@AbsoluteSabers 3 жыл бұрын
@@Tome1492 is it a 1 or 2 button saber you have?
@Tome1492 3 жыл бұрын
@@AbsoluteSabers Hi. It’s a 2 button. MPP 2.5. Bottom button turns the light saber blade on and off. Top button changes the fonts.
@AbsoluteSabers 3 жыл бұрын
@@Tome1492 try holding the top button on hitting the hilt to see if it makes a noise to let you into the volume settings. If not then it sounds like korbanth may have dont a weird config on it
@JoeSosta 2 жыл бұрын
Totally necroing this - Do you have to have the battery in as well as the USB while doing this?
@AbsoluteSabers 2 жыл бұрын
Yes you do HOWEVER, there are rumours of proffie boards being fried when leaving the battery in and connecting the data cable, this is not true, I’ve done it hundreds of times and never had an issue.
@JoeSosta 2 жыл бұрын
@@AbsoluteSabers Awesome! Thanks for the reply. Now to find a cable that’ll work with my particular setup (UltimateWorks Proffie heart). It’s a little … tight to get a cable in with the battery in place.
@DAV1D_77 Жыл бұрын
I have my proffie saber plugged into my computer and I installed the WinUSB driver using Zadig but when I go to the ProffieOS Workbench it says "No webUSB interface found" even though the website recognized that the proffieboard was plugged in. I have already tried switching to a different USB port and nothing changed. How would I be able to fix this?
@AbsoluteSabers Жыл бұрын
You need to activate the web usb option in arduino and then upload a new config buddy (or your current config if supplied on the sd card by your vendor)
@DAV1D_77 Жыл бұрын
@@AbsoluteSabers ok would you be able to give me a quick rundown on how to do that? Thanks!
@gazzy6294 3 жыл бұрын
So i cant just drag the font in and be done with it ? I have to change the color myself ?
@AbsoluteSabers 3 жыл бұрын
Unfortunately not my friend, the board looks for specific folders which are determined by your config so if you just drag and drop new fonts onto the sd card they won’t work, to do it that way you would need to just replace the individual sound files within one of the existing font folders. I do have a video on how to do this if you check the channel 🤘
@fatmonkey46 8 ай бұрын
So for this we keep the sd and battery in?
@zienkovskyanother_brickz7422 8 ай бұрын
Hey! I have a problem. I connected my proffieboard and under „Presets” it says „Waiting to list presets” and under „Tracks” it says „Card is busy, flags”. I don’t know what to do now
@lukehensler8238 3 жыл бұрын
Do I need to use zadig and arduino to flash my board for webusb? I watched a few videos and I don't want to mess with config files if I don't have to. Can you maybe explain or make a video on how you easily flashed your board for webusb?
@AbsoluteSabers 3 жыл бұрын
Unfortunately yes you would need to use zadig and arduino to reflash the board. I will get a video up hopefully this weekend and go through the full thing.
@lukehensler8238 3 жыл бұрын
@@AbsoluteSabers okay thank you so much
@davidlakatos5315 2 жыл бұрын
@@AbsoluteSabers was this video ever posted I’m stuck on this
@cantonbreeden2673 Жыл бұрын
So I’m in dire need here I was trying to get my saber set up where I could add sound fonts and I think I did everything right in zadzig and arduino but now my saber won’t cut on at all no matter what I do I even put all the original files back on my sd card but it won’t power on and I know it has a full battery
@AbsoluteSabers Жыл бұрын
That’s very very strange, did you ensure you put the correct number of buttons on the config? And did your new config 100% upload to the board?
@cantonbreeden2673 Жыл бұрын
@@AbsoluteSabers so I was trying to upload fonts for the first time when this happened I was kinda following along on another video but I never saw where I could adjust the number of buttons where would I go to do that?
@AbsoluteSabers Жыл бұрын
I would go follow my 4 step proffie video buddy, sounds like it would help a lot more. The number of buttons can be adjusted on the main config
@epsilon5808 2 жыл бұрын
Is there a way to edit 2 blades individually if you have a dual bladed lightsaber?
@AbsoluteSabers 2 жыл бұрын
I haven't tried this as i do not have a double bladed proffie YET, HOWEVER, judgingby the user interface I dont think so UNLESS you have 2 separate soundboards in the saber.
@epsilon5808 2 жыл бұрын
@@AbsoluteSabers I see. Thanks
@mmmyeaaaa 2 жыл бұрын
it says no webusb interface found when i click the usb option,what should i do?
@AbsoluteSabers 2 жыл бұрын
Unfortunately that means the web usb option has not been selected when the initial config has been done SO you’ll need to do it the other way of making another config, OR depending where you bought your saber from there may be a copy of it on your sd card. I’ve got a tutorial on my channel “4step guide”
@autiso Жыл бұрын
ive got an issue where mine wont connect at all, my pc recognises that ive plugged mine in but i cant see it in files, ive gone to customer support but theyve been awful and havent helped, i have a lightsaber with a circular charging cable, no sd card or data cable and i have no clue what to do, any help would be GREATLY appriciated
@AbsoluteSabers Жыл бұрын
If there’s no sd card then it’s not a proffie buddy sorry
@snarkbark2714 3 жыл бұрын
How do I make a master copy of the original presents that came with the saber so I don’t lose them?
@AbsoluteSabers 3 жыл бұрын
You should have a folder on your ad card that contains your original config, if not then contact the company you purchased the saber from and ask them for a copy for your saber. As for the sd card it’s self, you can get a sd card reader, copy all of the contents of the sd card and paste them into a back up folder on your computer. Hope this helps .
@snarkbark2714 3 жыл бұрын
@@AbsoluteSabers thanks for the quick reply
@sungameloc 2 жыл бұрын
So with this could I go in and lower the volume slider, eject it then exit the program? Then my volume would be set??
@AbsoluteSabers 2 жыл бұрын
I’ve tried that a few times in the past and it hasn’t worked unfortunately
@sungameloc 2 жыл бұрын
@@AbsoluteSabers Darn! I was looking for an easier way to do it cause Korbanth sent me my saber at 1800 volume and it's crazy loud haha.
@NoobScrub 2 жыл бұрын
For some reason when I try to use this the website detects the proffie board but says “No webusb interface found”. I have tried different cables, web browsers, driver updates but nothing has worked please help
@AbsoluteSabers 2 жыл бұрын
Unfortunately that means your proffie board doesn’t have web usb interface activated so you can’t use the editor until you load a custom config. I’ve got a couple of proffie tutorials which will help
@NoobScrub 2 жыл бұрын
@@AbsoluteSabers alright I will check them out thanks for the quick response 🙏
@Ren.Leader 5 ай бұрын
I think I’ve realized why this isn’t working for me. Am I to use the USB C charging slot or the micro USB slot above the SD card on the board?
@AbsoluteSabers 5 ай бұрын
The micro usb port, the type C port is for charging only
@rogermarinperlas1269 3 жыл бұрын
hello , i connect in the proffie ios online and I get linked proffieboard, I try to connect it and I get this: No No Webusb interface found
@AbsoluteSabers 3 жыл бұрын
Hi Roger, unfortunately this means you will need to flash your board and activate the feature in arduino before uploading the new OS and config to your proffie board. Watch this great video on proffie kzfaq.info/get/bejne/nKeemsqeuc6qZHk.html that should help you achieve this. Thanks again!
@anishsingh1926 3 жыл бұрын
Hello, this may or may not be a stupid question but I am new to the whole saber scene- will this method of adding saber fonts work will Korbanth Lightsabers?
@AbsoluteSabers 3 жыл бұрын
It depends on what sound board has been used, if it is a proffie soundboard then yes, this tutorial is specifically for the proffie board.
@anishsingh1926 3 жыл бұрын
@@AbsoluteSabers Sweet thanks- yea I ordered the proffie board just had to double check thanks for the quick reply
@AbsoluteSabers 3 жыл бұрын
@@anishsingh1926 glad to help my friend!
@teutonicpictures 2 жыл бұрын
Thank you so much. Just for another opinion, do you think that this would work on a Proffie Padawan Outpost saber?
@AbsoluteSabers 2 жыл бұрын
Of course it will buddy that’s where I got the saber in the video. If your ever getting anything else from them use my code ABSOLUTE5 for a discount 🤘
@teutonicpictures 2 жыл бұрын
@@AbsoluteSabers sweet thanks!
@ianhuskins2491 Жыл бұрын
I can't get my pc to show me whether or not the sd card is mounted for some reason. Any one got any fixes?
@AbsoluteSabers Жыл бұрын
check out my proffie tutorials buddy. sounds like the board isnt set up for mass storage access
@RezidentZombie 3 жыл бұрын
I have a proffie saber I got from korbanth. It came with fonts and blade styles. Will those stay or will they be deleted? Is there a way to save what's on there already?
@Tome1492 3 жыл бұрын
Hi. I got my Darth Vader (MPP) from Korbanth last week. I used this editor and it didn't erase the installed fonts. It seems to work. BUT, I am rookie programer so I still could break something. I made two backups of the original config. Keep in mind that according the Korbanth's website, adjusting the fonts will violate their warranty. So make sure everything works and that are you are ready for that risk before you start programming anything. Good luck.
@Tome1492 3 жыл бұрын
Also, you need to get a right angle usb micro data transfer cable if you don't have one already. They are available at amazon. Make sure you don't get usb c and that it's rated for data transfer.
@RezidentZombie 3 жыл бұрын
@@Tome1492 thank you. I have been wanting to add new fonts and blade styles but didn't want to mess up what was on there.
@schradester8 Жыл бұрын
Hey man, I know this is an older video but I’m prepping myself for when my first proffie comes in and I don’t wanna screw it up. Around 7:00 your cursor goes behind the video of your keyboard and I couldn’t see what you meant when you said “it should be down here.” Do you just copy the fonts I want to add straight onto the SD card without replacing anything?
@schradester8 Жыл бұрын
Also, is there a limit to how many fonts? It seems like you have a LOT, but usually I thought the limit was around 20, so I’m wondering if once I get close to that number I need to delete some presets before making new ones
@AbsoluteSabers Жыл бұрын
So you can put the sound font onto the sd card and then use the editor to add it and make the style yes
@AbsoluteSabers Жыл бұрын
Just whatever the capacity of the sd card BUT the more you add, the performance tends to dip as there’s more files to read so I usually keep it to around the 20ish mark
@schradester8 Жыл бұрын
@@AbsoluteSabersawesome, that helps a ton!And all of this works with OS6 still?
@AbsoluteSabers Жыл бұрын
Should do BUT I’ve got a dedicated OS6 video too you might want to check out
@ethorical2092 Жыл бұрын
So when I click "Here" and it takes me to USB or BLE after i click USB it says "No WEBUSB interface Found" why is that please help with this I cant find any answers.
@AbsoluteSabers Жыл бұрын
Looks like webusb option hasn’t be setup on your proffie board buddy, you’ll need to locate the config for you board, a copy of it should be on your sd card depending where you got it from, and select the serial + sd+ webusb option in the tools drop down of arduino. I have a 4 step proffie guide on the channel as well as a OS6 guide too, I’d recommend watching both of those starting with the 4 step tutorial
@grogu9906 2 жыл бұрын
Hey! I have follwed the steps to where you connect, but when i hit the usb button the "connect" button is greyed out and i cant click it. What should i do?
@AbsoluteSabers 2 жыл бұрын
I don’t think your proffie board is set up for web usb interface unfortunately buddy, you may need to just learn how to do it the proper way, I do have a tutorial. It is a bit more involved but not too difficult
@grogu9906 2 жыл бұрын
@@AbsoluteSabers That's fine, thanks for your help! Yesterday I finally figured out how to use arduino and zadig so now I can edit blade styles successfully!
@mk-ev8nu 2 ай бұрын
hi the website doesn't see the lightsaber but sometimes it does but i can't connect it... what can i do ? thank you
@soyomonke6148 13 күн бұрын
U have to change the config file and the serial I’m pretty sure there’s a tutorial somewhere
@RaySparkz Жыл бұрын
What usb power cable should I use?
@AbsoluteSabers Жыл бұрын
Micro usb data cable
@anakinskywalker3258 2 жыл бұрын
for some reason i can turn the volume down when im on this website, but the second i disconnect my use b from my proffie board it goes back to full volume. Any tips? Thanks
@AbsoluteSabers 2 жыл бұрын
That is only for testing buddy, it doesn’t change the volume setting on the board unfortunately
@anakinskywalker3258 2 жыл бұрын
@@AbsoluteSabers ahh ok thank you :)
@8antlers 2 жыл бұрын
I plug my lightsaber into my computer in exactly the same way you do, with battery+SD card inserted, but nothing comes up on my computer. What do I do?
@AbsoluteSabers 2 жыл бұрын
Unfortunately your board may not be configured for usb web access buddy, you’ll need to do it the proper way, check my channel for my profile 4 step guide, it’s around an hour long, don’t skip ahead, please take the time and watch/follow it, pausing where necessary
@izemancool13 2 жыл бұрын
Tried this but shows error "no web interface" when I select USB. I alraedy install the drivers needed and its my proffie shows now in my device manager set to com port 4
@AbsoluteSabers 2 жыл бұрын
Have you selected the serial + mass storage + usb interface option in arduino before flashing your board with a new config?
@izemancool13 2 жыл бұрын
Ok it means i need to upload a new config with those settings selected on my USB. If not mistaken my USB in arduino is set only to serial when I upload last time my config. It means i need to redo all over again wipeout my proffie and make sure the USB settings are selected to mass storage + usb before uploading the new config to proffie is this correct?
@AbsoluteSabers 2 жыл бұрын
@@izemancool13 that is bang on the money buddy yeah 🤘
@jakeatfiield 2 жыл бұрын
do you need a data cable for this? Or can you just use the SD card
@AbsoluteSabers 2 жыл бұрын
You need the data cable dude
@singriioticstudios Жыл бұрын
Did you have the battery inside the lightsaber when u did this??
@AbsoluteSabers Жыл бұрын
Controversially yes, it doesn’t work without a battery installed but make sure it’s not a power cable you’re using and only a data cable
@singriioticstudios Жыл бұрын
@@AbsoluteSabers alright!! Thanks
@helx9965 2 жыл бұрын
is there any way to add blade styles made in the proffie blade style editor?
@AbsoluteSabers 2 жыл бұрын
Not via the editor I’m afraid
@helx9965 2 жыл бұрын
@@AbsoluteSabers that's a shame, thanks for telling me tho :)
@BleedingEdgeIronMan Жыл бұрын
I keep getting a message saying no webusb interface found. Are you able to break down how you get past this? Thanks
@AbsoluteSabers Жыл бұрын
You will need to upload a new config unfortunately buddy and activate web usb, I’ve got a 4 step proffie tutorial on the channel that shows how to do all of this
@BleedingEdgeIronMan Жыл бұрын
@@AbsoluteSabers thanks so much mate, I’ll give it a go!
@shaifernandez2394 3 жыл бұрын
How do I actually add the new style to the board? I understand how to customize the style but miss where you actually add it to the saber?
@AbsoluteSabers 3 жыл бұрын
If you’re using this online editor is does it for you automatically as you create it. Please watch the video as everything is there.
@shaifernandez2394 3 жыл бұрын
@@AbsoluteSabers Wow thats so cool! Ive watched the video fully several times confused about that one part but everything else was explained in a way even a noobie like me could understand so thank you for clearing it up!
@shaifernandez2394 3 жыл бұрын
Is there a way to add a blade style to this as easy as it is with fonts? I made a style off fetts site that cant really be replicated off this yet.
@AbsoluteSabers 3 жыл бұрын
@@shaifernandez2394 unfortunately not buddy, if you made a style on Fetts site it can only be done through the config at the moment unfortunately
@rafaeltucci2317 3 жыл бұрын
If i have a removable battery saber, i must take out the battery to do this? I have fear of burning it... Thanks a lot
@AbsoluteSabers 3 жыл бұрын
No, keep the battery in as it will not work if the battery is out
@rafaeltucci2317 3 жыл бұрын
@@AbsoluteSabers so the saber must be with power on? And if i use a data and charger usb it will not fried it for sure right? Thanks again!!
@rafaeltucci2317 3 жыл бұрын
I have fear of burning it..
@AbsoluteSabers 3 жыл бұрын
@@rafaeltucci2317 use a data usb and keep the battery in the saber otherwise this online tool will not work, I’ve tried it with the battery removed and it doesn’t work for me.
@HotheadGT3 2 жыл бұрын
Hi there, I keep trying to edit and it only says “getting options” Restarted several times, able to view my current presets and such. Not sure what else to do!
@AbsoluteSabers 2 жыл бұрын
You may need to follow the actual route of using arduino and doing a config for it mate as web usb may not be activated on your current settings. I do have a full tutorial on proffie so go check that out, it’s a long one but if you follow it you’ll be fine 🤘
@HotheadGT3 2 жыл бұрын
@@AbsoluteSabers thanks for the response. Is there a way to tell if my settings are correctly setup? I am going to try again tonight. This version is much easier than the config version so hopefully I can get it to work.
@tasheemthedream4199 2 жыл бұрын
@@HotheadGT3 did you ever figure it out?
@TheRedMando Жыл бұрын
Do I just have to drag my font into the sd-card and it will get accepted and I can use it ?
@AbsoluteSabers Жыл бұрын
No mate, you need to go through the steps in this video. If your board is not set up for web usb then you’ll need to follow my 4 step proffie video
@TheRedMando Жыл бұрын
@@AbsoluteSabersdo you have a link for me you have so many videos
@AbsoluteSabers Жыл бұрын
It’s on the channel buddy under popular videos
@anthonyr5507 3 жыл бұрын
no webusb interface found plz help i don't know what to do
@AbsoluteSabers 3 жыл бұрын
Unfortunately you will need to reflash your board and select the serial+webusb+serial interface option in arduino. There are other videos on KZfaq which show you how to do this, unfortunately I don’t have one at the moment as my proffie saber actually is out of action at the moment
@TheBoysPlay4744 2 жыл бұрын
how do i know what saber i need in order to be able to do this?
@AbsoluteSabers 2 жыл бұрын
It’s for Proffie sabers buddy
@xakarion 3 жыл бұрын
Can I add here turn on and Turn off gesture for saber?
@xakarion 3 жыл бұрын
What should I do when I conect saber to my computer and nothing is happening? Should I click both gold buttons? Will it remove everything from proffieboard?
@AbsoluteSabers 3 жыл бұрын
Sorry mate been super busy! So if you press both buttons it will remover EVERYTHING from the board and you will need to reupload the Software and your config file
@paulhart4534 Жыл бұрын
hi what are the LGT Xeno Pixel Lightsaber like am a newby
@AbsoluteSabers Жыл бұрын
Amazing beginner neopixel platform buddy, check out my many xenopixel reviews and tutorials 🤘
@paulhart4534 Жыл бұрын
@@AbsoluteSabers love your reviews as am a star wars nut
@Jay-lb9hj Жыл бұрын
it lets me connect to my proffieboard on the site but then it says "NO WEBUSB INTERFACE FOUND" what does this mean and how can i fix it?
@AbsoluteSabers Жыл бұрын
It means that when your board was programmed at the factory, it wasn’t set up for webusb so you’ll need to do it the other way by creating a config file and using arduino. I’ve got a 4 step guide on my channel for this buddy
@Jay-lb9hj Жыл бұрын
@@AbsoluteSabers thank you!
@sithinquisitor4293 Ай бұрын
Ok I got all of this connected but when I just click USB because that's what I'm connected with, the website won't proceed. Nothing happens when I click it. It's failing execution. "Failed to execute 'open' on USB Device An operation that changes interface state is in progress. How do I solve and fix that? Anybody know?
@jedifam66 3 жыл бұрын
*Can you add your own custom music track?*
@AbsoluteSabers 3 жыл бұрын
Yes you can, add the file to the “tracks” folder on the sd card and then when you’re building your font on the editor you can select it. Make sure your sd card is in the board when doing this. A micro sd card reader is needed too obviously.
@bwokoly1333 Жыл бұрын
Does this work on padawan outposts sabers
@AbsoluteSabers Жыл бұрын
Works on all proffie sabers but they have to be set up a specific way from the factory (web usb interface) needs to be activated in arduino when uploading the config.
Absolute Sabers
Рет қаралды 25 М.
Stephen Powell from Powell’s Power-Ups
Рет қаралды 12 М.
Kyle Bridges
Рет қаралды 2,1 МЛН
Everardo aka WeebuSabers
Рет қаралды 2,4 М.
Megtooth Sith Sabers
Рет қаралды 13 М.