How to Add Soundfonts to a Proffie Lightsaber
Рет қаралды 92,753
Күн бұрынShop all things Star Wars at Fathead! www.pjtra.com/t/2-422285-2653...
Use code DSQSABERS20 to save 20% on new customer orders, PLUS free shipping at Dr. Squatch! www.pjatr.com/t/3-285017-2653...
Use my affiliate link at Jelly Belly for your gourmet candy needs! www.pntra.com/t/2-235887-2653...
This is a tutorial showing the two common methods of adding soundfonts to a lightsaber using the Proffie 2.2 soundboard. This saber is using ProffieOS 5.7, and these methods are subject to change in the future. This video will not cover changing certain defines in the config file, gesture controls, or any of the sort. This is solely about adding soundfonts that you bought or got from a fontmaker to your saber, and attaching a blade style to it.
Lightsaber: 7Chambers AniFlex V2, installed by Jeremy Puckett of Solo Sabers LLC with Neopixel/Proffie
NUMBER ONE MOST IMPORTANT POINT:
Make 100000% sure that you are using a micro-USB DATA cable. Not a micro-USB CHARGING cable. I use the Rankie Micro-USB Data Cable, available in a 3-cable pack here on Amazon: www.amazon.com/Rankie-Micro-C... (NOT SPONSORED)
ProffieOS Website: www.fredrik.hubbe.net/lightsa...
Fett263's Blade Style Library: www.fett263.s3.us-east-2.amaz...
Stephen Powell (Powell's Power-Ups) Proffie Tutorial: kzfaq.info/get/bejne/sJ2mZc-ElbnTko0.html
BK's Proffie Tutorial: • Video
TIMESTAMPS:
00:00 - Intro
00:20 - EXTREMELY IMPORTANT!!!!!
02:43 - What You Will Need
04:10 - Easiest Soundfont Adding Method
11:20 - How to Add Fonts/Styles with Arduino
29:56 - Do You NEED Zadig? (+ links)
31:54 - Testing the Added Font
33:12 - Info and Outro
My Merch Store: www.landosabers.com
#proffie #lightsaber #proffietutorial
@LostCompositions 3 жыл бұрын
I already feel better knowing Lando's fried a saber just like all of us.
@LandoSabers 3 жыл бұрын
I wanted to be able to feel the pain. It was very felt.
@seaslicks 3 жыл бұрын
How do you know if the board is fried? Are there any indicators?
@LostCompositions 3 жыл бұрын
@@seaslicks You'll smell it, haha
@zaowinslow487 2 жыл бұрын
My first 2 lightsabers fried as soon as I plugged them in
@blake_1146 2 жыл бұрын
@@zaowinslow487 is it because you used a power cable not a “data” cable
@wolfybuilder 3 жыл бұрын
This needs more views! Until this video, I hadn't even considered the possibility of frying my board with a charging cable! This is very important information that is rarely discussed, and needs to be more widely spread
@llollercakes 3 жыл бұрын
This should be the #1 Proffie set up video everybody watches first. Best one I've watched and super easy to follow. Great job man.
@andredantin15 2 жыл бұрын
I can’t overstate how invaluable this was for me being a Proffie noob. You make it seem 1,000% less daunting in a clear, concise fashion. Hats off to you, sir!
@kolbynope3911 Жыл бұрын
I have one ordered, I was going to get a cfx for obvious reasons, but they were sold out for the hilt/saber/whatever you call it. I went with a proffie just to be safe and finally get my hands on one. Do certain fonts not work on proffie boards?
@aarenhogan8932 3 жыл бұрын
My CrimsonDawn Saber literally just came in today and this vid just came on my feed.
@rpmrunner 2 жыл бұрын
Simply the best, always covering every detail, always unbiased, always a little longer than most people would probably prefer, but that's a small price to pay to have most every question answered.
@mojavetrooper8547 2 жыл бұрын
Thanks so much dude, this really helped. Small addition though for anyone having the same issue with the Port in Arduino. In a lot of cases too, The first time you do it, it doesn’t have to say ‘Proffieboard’, it most likely just says ‘COM3’ or ‘COM(X)’. Once you upload it to that the first time, the next time you plug in your board, it will start to say ‘Proffieboard’
@jmk3149 3 жыл бұрын
Lando, you made this so easy. I thought this was something I couldnt do ever, but following your video, I was able to get it done on first try. Especially easy on Mac. Thx man
@jimmyj.jacobsonjohnsonjr.2464 2 жыл бұрын
I’m on mac as well, which method did you do? the first one or second? because i’m doing the second one but I’m stuck at a part that i need some help with
@htv_frexxy6333 2 жыл бұрын
I’m on a Mac but my brain did not understand anyone able to help
@LyricalViking 3 жыл бұрын
I just bought my crimson dawn proffie board, this video definitely helped broaden my knowledge a bit more.
@RobtsaTV 3 жыл бұрын
Thank you for this video I've just purchased my first Lightsaber I have gone balls deep and gone straight for a Graflex proffie neopixel, After watching all your and others videos I just had to have one. It's crazy I've been Star Wars mad since 1982 but never really thought about purchasing one until now I can see what they can do. I've done hours of research in to Proffie etc and found this probably the best one yet. Also thank you for all the other videos steering me clear of Ultrasabers and so on. MTFBWY
@AverageNerdGuy 2 жыл бұрын
This is going to be SOOOO helpful!!! The driver and flashing of the board is almost EXACTLY the same thing I had to learn to flash my iFlight controllers for the FPV drones I build. I was so worried about having to learn all this and had been told how horrible Proffie was but from the dfu comm connection, to the config flash, to the driver issues; this is all stuff I had to troubleshoot and learn with Betaflight and BLHeli for Flight controller and ESC flashing when I tune my quad!!! The coding part reminds me a lot of the stuff I had to code in Marlin for my 3Dprinter when I built it (All the way down to having a config.h file; which is no shock because my printer's mainboard uses an STM32 processor chipset as well). Its amazing how these hobbies follow so many similar pathways!!! Thank you SOOOO much!!! I cant wait to get my final parts in (Waiting for my TGS Hilt to come in and my Shapeways crystal for my Crystal Chamber) then i can finish up my ANH Graflex.
@LandoSabers 2 жыл бұрын
Just make sure when you go to flash the board, there’s a chance it won’t compile as I had drivers on my computer that tried to use my Proffie, so I had to go in and remove them, select the STM32Bootloader in Zadig and use WinUSB drivers so that my board would be recognized. Stuff like external controllers, racing sim software and hardware, etc. can mess with Proffie boards.
@pdamasco 3 жыл бұрын
This was the easiest video to follow on this subject so far. It's weird that they designed it in a way that the standard micro USB cable could possible cause damage but I'm really glad you mentioned that. I have a ton of them hanging around but most are probably from phones and Bluetooth headphones for charging so again I'm super glad you mentioned this! I hope you make more like this in the near future.
@LandoSabers 3 жыл бұрын
Thank you Paul! And yeah, it’s kinda sad that the current board does not support micro USB cable charging, but the Proffie V3 board (pending release hopefully this year) should support it, so mess ups with the wrong cable may actually be eliminated and go unpunished there. It makes it very convenient, and eliminates a bit of the risk, so that’s really nice in my opinion. But until then, we all have to be very careful with our cable management around the Proffie 2.2, I keep all of my data cables far away from all of my charging cables.
@cynical9325 Жыл бұрын
I cannot express my gratidute, It took me sitting down and truley trying to learn proffie, and you made it so much easier man. Thank you so so much!
@Flajnut 2 жыл бұрын
This helped me get started so much. This video was an invaluable tool. And should be the go to video for anyone just starting to learn how to customize saber fonts and styles.
@Solo_Sabers 3 жыл бұрын
Excellent video. I watched the whole thing and found it to be very informative form A to Z man. I’ll be referencing customers to this. Thank you
@LandoSabers 3 жыл бұрын
Thank you brother!!! Means a lot coming from you. Good luck on those upcoming installs, don’t forget to take a little break/vacation every once in a while 😂
@thunt02 2 жыл бұрын
Was very disappointed by the quality of some of the sound fonts on the crimson proffie core, I decided to replace those sound fonts with better ones. Thank you so much for this helpful video!
@jacobharmon519 3 жыл бұрын
This is a great resource for Proffie beginners! Hopefully proffie doesn’t seem so scary to newbies after this. wish this was available when i started lmao
@imranmadison1562 Жыл бұрын
Thank you so much I was completely lost without this video as I just bought my first proffie neopixel. I really appreciate it!
@thejediguy3362 2 жыл бұрын
HI Lando Sabers! I got a Luke Skywalker Proffie lightsaber! I tried the easiest method that you showed us, now it plays the music and sound from The Mandalorian rescue! Thanks again!!!
@orangethesaberguy7638 3 жыл бұрын
thank you for making it easier to understand. As a person who had to go off of 4-hour youtube videos and just reading the manual over the course of 16 hours, this helps others avoid the pain I went through. Also I never had an issue with cables, if it wasn't a data cable nothing happened for me. Would avoid using a non-data cable though. Better safe than sorry.
@sandcrawlerrelics3610 3 жыл бұрын
Sweet! I just got my first proffie saber from Korbanth, this is useful. Thanks Lando! Gonna give you props on my unboxing and review!
@DANGRMAN57 3 жыл бұрын
the video we have all been waiting for, LEGENDARY
@snowbiwan-kenobi5594 3 жыл бұрын
thank you thankyou thankyou thankyou!!!!!!!!! took me just iver an hour to sort issues out but had my first 100% upload to my saber today and it all works :D extremely happy
@eazyonewiththeforce 3 жыл бұрын
Great video. Just got my first proffie 2.2 and this is a life saver. Thanks brother
@JediPhoenix1976 3 жыл бұрын
Here's where the fun begins...my Heirloom neopixel from Rebel Sabers is a Proffie; I'm not looking to adjust the blade styles for now, I just want to be able to add sound fonts. Glad I saw this to learn how easy it is; found the SD card, just gotta get a reader, and I'll be good to go.
@jeffrey9750 3 жыл бұрын
You sir, are an absolute legend. Thanks to your great video I was able to install new fonts and styles on my weathered Starkiller. Thanks again man!
@OGDarthPerilous 3 жыл бұрын
Another great video Lando. I'm really digging proffie and I can't wait until OS6 drops.
@shaunm2691 3 жыл бұрын
I had a feeling that file replacement was possible, glad to know I wasn't wrong. That's the method I'll be using until autoconfig update is a thing.
@AndrewTanielian Жыл бұрын
This is incredible! I learned a lot and have since looked up Profile 6 because you said it was coming out. Thank you!
@jo5dsmanrising50 3 жыл бұрын
Don't own a proffie, but was generally curious. Very informative video.
@TheMrutan 2 жыл бұрын
This was incredibly helpful. I hadn't ever messed with the sabers before but after following this I had no issues. i spent the whole night last night removing some of the fonts i didnt like, and added some that i did. thanks for posting this, it was very helpful
@imstrz 2 жыл бұрын
where can you download new fonts?
@TheBigChuckles 6 ай бұрын
Dude I just got my very first proffie saber early this month and your video has helped me tremendously. I haven't tried anything yet cuz I probably should buy a micro sd card first just to avoid any potential complications and then Imma search the web for some fonts. Cheers!
@jimmy2thymes916 2 жыл бұрын
So glad I found this video. Just purchased a saber with Proffie and would have had no idea about the USB cable. Picked up the usb you recommended.
@UncleFromAnotherWorld Жыл бұрын
i plugged the usb he recomended in and the lightsaber made a weird noise did that happen with you?
@jimmy2thymes916 Жыл бұрын
@@UncleFromAnotherWorld I never ended up messing with the sound files. I was told by the manufacturer of my saber that it could possibly screw things up.
@DriftTrio Жыл бұрын
Bought myself a Proffie from Sabertrio two weeks ago (since they actually have something in stock) and realized I had no idea how to actually add sound effects. thanks for this video
@culp22 11 ай бұрын
I also have a new proffie from sabertrio and still feel a bit overwhelmed. I cannot find a killswitch on mine anywhere. You?
@DriftTrio 10 ай бұрын
@@culp22 its the little black toggle switch next to the charging port. sorry i took so long to reply
@xanderselick 2 жыл бұрын
Very concise and clear. There weren't any points were I was confused. Solid tutorial man 👍
@xdom3641 3 жыл бұрын
I've been looking forward to this. My proffie sabers have doubled since the last soundboard tutorial. Spelled doubled wrong, had to fix because ocd
@ahmedsamih 3 жыл бұрын
thanks for the proffie board version tip .
@lordofsarcasm460 3 жыл бұрын
I'm excited I ordered from the pachstore for my first saber(proffie)
@DrFranklynAnderson Жыл бұрын
Read that thumbnail as “how to add profanity soundfonts to a lightsaber.” Now I want a font where the clash noise is Sebulba yelling “Poodoo!” 😂
@desertfarecosplay 2 жыл бұрын
Bruh, you saved my cosplay Thank you so much for this detailed tutorial!
@dano579 Жыл бұрын
Can you do an updated video for ProffieOS 6.7 pleaseeeee
@sublimechimp 6 күн бұрын
Crazy to me proffie prides themselves on “everything is possible” meanwhile you have to risk destroying the electronics just to get the sd card out
@MACA-md8bx 3 жыл бұрын
You are the best mate, I had trouble for hours and your video saved me, I can't thank you enough dude. Thanks Sooo Much
@jeremydeihl 3 жыл бұрын
Took me a few times to iron out all the kinks, but thank you so much for this video!
@KSithSaberFonts 3 жыл бұрын
Legend. Thank you kind sir.
@balljoint5853 Жыл бұрын
Dag it actually worked. Mad props 💯 thanks bro mad respect
@LaneCopeland42 3 жыл бұрын
Good timing!
@Evadious-2022 2 жыл бұрын
ABSOLUTLEY BEST TUTORIAL. THANK YOU!!!!!
@blake_1146 2 жыл бұрын
Once you’ve downloaded the latest version at the start, how do you get that to the board, how do you update to the latest version and get it from your computer to saber
@oscaranderson6035 3 жыл бұрын
To the people watching this video and wondering if the usb cable sabertrio provides works for proffie. IT DOESNT!!!! it will fry your board. I learned the hard way.
@markgallie7899 Ай бұрын
The dirty way seems so fast and easy, just need to take note what you've switched with what. Got my first proffie baylan skoll saber, looking forward to switching up some fonts!
@nitthegrit7544 3 жыл бұрын
Great Vid Lando, thank you! I use the same data cables. They are very reliable - work perfectly.
@lukebusler2296 10 ай бұрын
Yo mad props to this guy I was watching a different video a while back and told me the charging part at the end of the video luckily the charger was broken and couldn't fry my saber
@oscaranderson6035 3 жыл бұрын
YESSS thank you!
@enricopallazzo19 3 жыл бұрын
Nice video. I hold onto a basic text file with my blade profiles by font. If I get a new saber or want to change one up, it’s just a matter of copy/pasting them to the config. Personally, I always have to use Zadig. Not a big deal, but it does make it a build requirement that I have access to the board. Must have access to the boot/reset buttons.
@LandoSabers 3 жыл бұрын
Yeah that’s a bit unfortunate, but it’s always nice to have full access to the board even if you don’t have to use the boot/reset buttons.
@willeveleigh5633 3 жыл бұрын
Cyberpunk and JFO. My mans got taste, and good advice! Thanks!
@Tofu6969 7 ай бұрын
THIS IS SO HELPFUL OMFG
@TyDyeGaming 2 жыл бұрын
You should make another one of these for Proffie OS 6.7! Love watching your vids and would love to follow along with you
@e.j.chijimatsu5487 3 жыл бұрын
Thank you for this!!
@franciscoendi9150 3 жыл бұрын
Yes
@lidenkatarn 3 жыл бұрын
I’m going to have to watch this video 10 times over again
@Gasmonkey1134 3 жыл бұрын
really wish there was a stream this week
@myflourishingfam 9 ай бұрын
Thank you!!
@thecrimsonghost2654 2 жыл бұрын
Thanks so much for this video and adding a level of anxiety with my cable I never knew existed.
@sirslayalot9095 2 жыл бұрын
Very helpful! Thank you Sir!
@gamma105 3 жыл бұрын
Amazing vid. I read a whole bunch of scary jibberish online, and your vid cleared everything up! Ty !
@blake_1146 2 жыл бұрын
Once you’ve downloaded the latest version at the start, how do you get that to the board, how do you update to the latest version and get it from your computer to saber
@FabioJackson 2 жыл бұрын
what if you dont have a config file?
@jonsalo5327 2 жыл бұрын
dont even have a proffie board yet but gonna keep re watching and practicing until i do thats for sure
@totalaveragegamer1126 3 жыл бұрын
Thank you so much for the video I’m a little confused I’m new to all of this do I even have to take out the SD card at all or can I do everything through the USB
@cnttwatchula 3 жыл бұрын
Perfect timing
@philydelphia8646 3 жыл бұрын
I couldn’t agree more!! Amazing video!
@TheWildRacco 2 жыл бұрын
This may be a stupid question, but do you need to still take out your micro SD card and use the card reader if the saber has a micro usb slot (eg. LGT sabers have accessible micro usb port for charging). Can fonts etc be transferred that way with a data cable or is it solely for charging and you still need to change things via the reader and card itself?
@wombatfour372 2 жыл бұрын
Hey lando! Just want to thank you for the amazing and informative content. Your info led me to purchase a shade v2, and I'm pumped to get started in the saber community! (And a bit nervous about editing the profiles😅)
@blake_1146 2 жыл бұрын
Nice I got the proffie neopixel shade aswell, amazing saber. I wanted to add more fonts to it but realised that adding fonts on proffies are not very user friendly for people, especially newbies like me.
@wombatfour372 2 жыл бұрын
@@blake_1146 I'm not going to lie, I was so happy when I got it. But only a week after, the audio started to crackle, pop, and cut out after a few seconds. I will credit them, their customer support got to me very quick and suggested I ship it back. So we will see how it goes.
@wombatfour372 2 жыл бұрын
@@blake_1146 just a heads up as to a possible difficulty
@blake_1146 2 жыл бұрын
@@wombatfour372 for me the audio is only slightly crackly on some of the fonts when you swing it hard, do you have the proffie neopixel version? If you do the one we have is like literally the cheapest proffie neopixel you can buy anywhere, so I wouldn’t expect top notch sound from it. Where are you based by the way?
@wombatfour372 2 жыл бұрын
@@blake_1146 Hey, sorry I diddnt notice this reply until now. I do have a neopixel, and what I mean by crackle is it actually had decent audio for the price, but when I turn on my saber it crackles and literally POPS for a few seconds, then turns off. Finally getting around to getting it handles though.
@BK-Kizzle 3 жыл бұрын
Sweet vid!!!
@towerbunga Жыл бұрын
Me, not owning a Proffie saber or a sound font: Ah yes, what a video to watch at midnight.
@Toutoune25 Жыл бұрын
Hi I'm not sure to understand can we do it with sd card only on computer or it's to obligate to connect saber with cable on computer?
@sandcrawlerrelics3610 2 жыл бұрын
Curious. Will the cables I got with my Sabertrio saber work? Is that considered a data cable?
@jacksonmills9074 Жыл бұрын
Thank you I was going to try a tutorial just to try it and see if I can do it because I definitely would have fried it
@FabioJackson 2 жыл бұрын
dude I messed up after I flashed it now I get static noise when i put in the battery and have light but no sound is there a way I can reset or even send it to someone trust worthy so they can do the fonts?
@swishslightsabers8420 2 жыл бұрын
Yes there is.
@chrispetro4463 2 жыл бұрын
Just got my first proffie 6.* saber - last ones were 5.9. Not sure why, but this new one is programmed with 6.5, instead of the latest 6.7. I really like 5.9, and after trying 6.5, I like 5.9 better and want to re-program the new one down to 5.9. I have programmed the 5.9 sabers with both the Easy Proffie and Arduino methods, so i am (somewhat) familiar with those methods. Do you see any issues with downgrading from 6.5 to 5.9? I know that I have to add a "Common" folder onto the SD card for the sound to work properly. What about the blade styles that are currently in place - do you think I will lose them when I go down to 5.9? If so, can i cut and paste those styles into the 5.9 OS, or is their programming for 6.5 different from 5.9? Thx much for your thoughts and help on this!
@princeofpeace2915 2 жыл бұрын
Do you have to take the SD card out of the saber? Or can you plug it into computer USB? Because I notice some sabers have that usb connection? Can do use that for this while saber is off?
@chrisyoung3231 3 жыл бұрын
Hi, I ended up getting new sd cards that are faster reading but my blade ignition and clashes are lagging when I loaded the original fonts I received from my profile shade onto the new sd. Thoughts?
@deadmemer2480 3 жыл бұрын
I’ve just ordered my first proffie lightsaber and I want to put some sound fonts/blade effects on it. This video was very informative but I’m still nervous of screwing the coding and breaking it
@blake_1146 2 жыл бұрын
Same
@jc.offthewall1503 2 жыл бұрын
If you don’t mind sharing, where exactly did you get your proffie saber? I’m interested in getting my first one but the sound I found for one needs to be a proffie saber.
@priyonjoni 2 жыл бұрын
I clicked the Amazon link for the data cable. They appear to be described as “high speed data and charging”. How can I be sure it won’t try to charge and leave me with a fried board?
@masonjohnson2756 2 жыл бұрын
Hey Lando, I bought the sound font “chosen one” from Ksith, and bought it so I could use the villain font and have the younglings scream when I deflect blasters. It comes automatically with the normal blaster sound, and I checked the extras file on the font I bought and it does include the screaming sound. When I copy those, and paste it into the blaster file (on the SD card) I have to delete the previous sound (normal blaster sound) after doing that and pasting the scream sound in, it doesn’t make any noise on my saber when I try to deflect blasters. It just hums like the saber is just on, resting. Can you please help me? Thank you
@masonjohnson2756 2 жыл бұрын
Nevermind Lando, I’m so stupid, I forgot to rename them when I put it in!🤪😂🤣 thanks for all you do bro
@moleliza7832 Жыл бұрын
The amazon link goes to a cable that has both charging and data transfer capabilities, would that still be safe to use? Also after plugging the SD card into my computer, I cannot find the config file anywhere, any suggestions?
@brianconner1389 Жыл бұрын
Hey buddy. How would you feel about redacting the "charging only" cable part? It's constantly a battle when trying to support new users now a year later. Also, 8 character limit is for Teensysabers only.
@niclasskywalker 3 жыл бұрын
Good Video, very nice explanation. But as a tip i would recommend "notepad ++" to edit the config. Because it will show you if you forget a comma or something Like that. It shows you also in which line you are which is helpful if you have made a mistake because arduino tells you in which line the error is.
@LandoSabers 3 жыл бұрын
There are settings you can configure in Arduino that does the same thing :) I didn’t recommend Notepad ++ because I have tried downloading it NINE times on my PC and it has never worked once. Have no clue what’s going on there.
@niclasskywalker 3 жыл бұрын
@@LandoSabers ohh i didn't have any problems with Notepad++. But where are those settings in arduino so that i can use it?
@kschantz Жыл бұрын
I don't know where you got your information about USB cables, and you may have found this out since then, but here it is: All data transfer cables are charging cables, but all charging cables are not data transfer cables. There is no such thing as a USB Transfer cable that doesn't also have the positive and negative charging wires. All USB cables have the positive and negative wires used to charge the device. Not all USB cables have the data exchange wires, so charging only cables are typically more narrow than charging/transfer cables. Devices that aren't supposed to be charged through the USB port don't have the positive and negative contacts in the port. If you fried your sound board, it wasn't from the proper use of a USB cable. If you plugged a charging only cable into your Sound Board, it shouldn't have done any damage because if the Sound Board isn't meant to be charged through that port, it won't have the positive and negative wires in the port. Either something else fried your Sound Board, you managed to somehow force the USB cable into the port the wrong way, which still shouldn't allow the positive and negative wires to make contact with the port, or someone wired the port onto the Sound Board incorrectly and you got voltage through a data transfer circuit. It is next to impossible to harm a device by plugging a USB cable into it. The only negative affect of using a charging only cable would be that you can't transfer data. In case you are skeptical, just google it.
@mrobert19897 3 жыл бұрын
I went through all the steps on using the micro USB data cable and downloading arduino, copied and pasted the arduino plugin as well as the the 5.9 version download, but for some reason on arduino I go to the tools menu then boards and I do not see the proffie board. I am not sure if arduino is not detecting my proffie board; my computer detects my proffie board but not arduino. I recently got my saber from Crimson Dawn 3 days ago.
@cellmate496 Жыл бұрын
When trying the easy method, I replaced some of the existing .wav files in one of the font folders with one I created and used the exact same file name and extension, but the sound does not play through the related saber action. Is there something particular to do when creating the sound files for them to work when placed in an existing font?
@rain.raiden777 Жыл бұрын
hello really a great detailed tutorial congratulations. I'm a novice I'm trying to learn how to configure with Arduino and to start I want to try the first method ... I have a small question the first method you show or go to insert a font in an already existing one on the sd card without connecting the sword to the pc by replacing the two fonts the style of the blade remains that of the old font but all the sounds of the new font change the typical smooth swing sounds or the sound of the character's blade by inserting a new font only does the visual aspect remain the same as the old font?
@cameronj.lanehart2617 Жыл бұрын
Is it possible to change the color that the blade makes when flash on clash is activated using the easy way? I'm trying to change the flash on clash color from white to orange/yellowish color for my luke skywalker sound font
@slythefish8549 2 жыл бұрын
Very helpful. But how do you change the blade color of a preset font?
@ianhuskins2491 Жыл бұрын
Hey Lando! I bought the Immortal Vader saber from Darkwolf with a proffie board, but the saber itself is xenopixel so do I download proffie fonts or xenopixel?
@princeofpeace2915 2 жыл бұрын
Can you also do this for the Astari boards? And dose it matter where you get the sound fonts from?
@DVDL04 2 жыл бұрын
Hello Lando Sabers, I recently bought a Kylo Ren Proffie board lightsaber and I really want to add soundfonts and stuff. But I asked the person who I bought it from (Sean Solo Sabers) if I can turn off the "Unstable" effect. And long story short, he said it was "hard coded" into my saber. Do you have any idea if I can change that with the ProffieOS?
@kiry2099 2 жыл бұрын
Who do you recommend to get classes in how to configure profile or any kind on sabers install or configuring making?
@proevo805g 2 жыл бұрын
do you know if the cable sabertrio provides would work? they say to use the included cable in the user guide page on their site.
@BubblyBK Жыл бұрын
Can you make an updated video on how to add sound fonts to proffie
@dadinova4724 3 жыл бұрын
Goat video
@Lurkai Жыл бұрын
I am unable to get past 25:50 , I was getting and error regarding my Sabertrio config file that I was editing that read>> #include"../props/s3button_config.h I ended up putting this exact file in my Props folder for the ProffieOS file but now when verifying I get a whole host of errors pertaining to how certain commands are named. Im sure there may be an updated tutorial in the future but would you or anybody be able to help me fix this? If not ill be okay with the quick-dirty way..though would id really like to fully utilize some of the fonts ive bought like Supernova from Jaydolorian :(
The Saber Factory
Рет қаралды 1 М.
超人夫妇
Рет қаралды 27 МЛН
Absolute Sabers
Рет қаралды 40 М.
Максим Шпакович | котики | озвучка
Рет қаралды 1,3 МЛН