Added R134A refrigerant to a fridge that had been sitting for 3 months
Пікірлер: 43
@repairsolutions-m4yАй бұрын
I just want to ad that this video was not intended for professionals. The author of this video intentions is to help the average person fix their own refrigerator. Professionals know what they are doing. It is not an entire explanation on how the refrigeration system works.. This is what we call a quick Simple DIY or you may call it. Dad's home repairs. I love the way , he is explaining every detail on how to get this done something I am not very good at. This can have your refrigeration working in no time, this will get it running for quite a while again. Keep in mind that once you have a leak in a refrigerator, it is the beginning of the end to that unit. It is either old, try to look, for green corrossion in the lines, these tipically have a leak.. You will find a leak spot right under them... So you would know where to fix.
@gabrielacuna5981Ай бұрын
Thank you for your comment
@repairsolutions-m4yАй бұрын
A broken refrigerator is one of the worst problems you can have on the home, and knowing how to fix it quickly ,like explained on this video is very important. To get your refrigerator running again, before food starts going bad. I've seen people go grocery shopping and come home to find out their fridge isn't working. The explanation on this video is so important for every home owner to know. Techinicians are not always available right away! This can save the Day!
@gabrielacuna5981Ай бұрын
Thank you, I always recommend to call a professional to look at it when possible
@MundiTaurusАй бұрын
This will never save the day. There is no way to get this done before the food spoils, or gets too low of a temperature to take the risk of eating. Anyone worried about an emergency repair: Already have these things on hand, and a huge ice chest. When your food is on ice, do this as a temporary fix, then do it right... DIY... it's easy, and not very costly. If the refrigerator needs freon, it probably has a leak. If so, that has to be fixed first. NOTE: Proper tools are not expensive for this DYI. Older, more reliable refrigerators should be used as long as possible... unless you like wasting money (on a newer, lower quality refrigerator). It's also good to have a start capacitor on hand.
@repairsolutions-m4yАй бұрын
First of all you have to identify the problem. The most common is your relay overload and a 3 in 1 is correct, having those handy is good. But make sure your fridge has just the two wire going to your relay. Some have more wires and without the proper electrical knowledge you can do more damage than good. Also, this fix is more proper for older units and anything that cost 800 or less. If you have one of these units and had it for over 6 years its worth the risk. You are due another anyway. Do not try this on a unit worth 2500 dollars, call a professional. When your compressor needs freon, the humming noise sounds different and your compressor will be very hot. This is how you can find out if it needs it. Never ad any freon without letting the compressor cool down by disconnecting the unit a few hours. This will kill your compressor.
@changingtimes377666 ай бұрын
I really enjoyed your video. It was very informative. Don't let all of the KZfaq trolls get to you with their ill-gotten comments. ♦️ This is exactly the way you should charge your system. ♦️ The bullet piercing valve is not a temporary service valve it is a permanent service valve. I do agree with one of the comments about unscrewing the puncture screw again. The reason I say that is because the cap you put back on has the service valve on it and it is designed not to leak. ♦️ As far as purging the system or evacuating this system before you added freon it would be a complete waste of time. If you have a small leak in your refrigerator what little air gets in it will leak out again anyway. ♦️ I have been adding freon to my wife's truck for the past 7 years and I have never evacuated the system, I have to add about 1 and 1/2 cans of freon every summer. ♦️ The only way you should evacuate or Purge your system is if you break open a line for some type of replacement or repair work. Otherwise there is no need to purge your system just because you are adding freon. ♦️ If it wasn't for KZfaq videos like yours we would be left completely without any source of information with various results.
@gabrielacuna59816 ай бұрын
I really appreciate your feedback. Your information was very helpful also.
@MundiTaurusАй бұрын
LOL! "...trolls"... People that do things right and relay needed information are not trolls, they know better, I.E., are intelligent. The proper tools don't cost much. For instance, there are pawn shops. Even cheap new tools for this simple fix are not expensive. So, no, that is not exactly the way you should charge the system. Doing it right in the first place is never a waste of time. "If you have a small leak in your refrigerator what little air gets in it will leak out again anyway." Maybe. And, what else will definitely leak out? After 7 years of never fixing your wife's vehicle properly, you know the answer. :-p
@MundiTaurusАй бұрын
People, do this the correct way. Spend 75 to 200 bucks on everything you need. The steps are very simple with the right equipment. Even that is much cheaper than replacing a cheap $600 refrigerator. This will never do the job right, and you may wind up with no refrigerator, or one that never works properly, which will shorten its lifespan even further. Remember, older refrigerators were made to last longer. If you have one in good shape, do it right. If yours is on its last leg, fine.
@gabrielacuna5981Ай бұрын
Thank you sir
@Adamman15187 ай бұрын
Bullet piercing valve is a temporary service valve. You should attach it to the process stub and crimp just below than braze.
@gabrielacuna59817 ай бұрын
Thank you
@tbone63546 ай бұрын
Usually I add 50ml of swimming pool acid to the compressor before regassing. This is to keep it clean of rust
@gabrielacuna59816 ай бұрын
Thanks for the info
@jollygreen4639Ай бұрын
You’re full of shit too. Don’t add pool acid, everyone.
@MrLenniy8 ай бұрын
You did not bleed the air out the charging hose. That is very important, not to get air in the system
@gabrielacuna59818 ай бұрын
Thanks
@morfeo9046 күн бұрын
I also decided to fix my refrigerator myself. But it is a lot more complicated than this. You have to find the leak before adding more gas. You have to get any moisture out of the system. It mixes with the gas and turns into a metal corrosive. Also the piercing valve is cheap and adds an additional leak. I ended up buying a vacuum pump, manifold gauge and soldering equipment before I was done. R134a gas is safe. But R600a (Daewoo Refri) is highly flammable. Be careful 😅
@MaxWon568 ай бұрын
Many thanks!!!
@gabrielacuna59818 ай бұрын
You’re welcome
@ocastego86453 ай бұрын
Piercing valve goes in service port side or the return line?
@gabrielacuna59812 ай бұрын
Service
@forgivenessngwenya32227 ай бұрын
For future servicing recover old refridgerant check for leaks by pumping in dry nitrogen to 100psi and check with leak detector or use soap bubbles and pull a vacuum to 500 microns and charge with liquid using a scale for accuracy id recommend fitting an access valve
@gabrielacuna59817 ай бұрын
Thanks for the info
@KenMageeАй бұрын
When did you bleed all the air out of your charging hose? This video is 8 months old so more than likely you have already replaced this system since you completely ruined it.
@gabrielacuna5981Ай бұрын
Just how I was taught to do.
@davidcostello99764 ай бұрын
I need your help, please, my refrigerator. Smells like lysol I washed it and washed it.And I can't get rid of the smell.It's even going in my kids's food.The smell how could you help me😢
@gabrielacuna59813 ай бұрын
Hi David, I can’t accurately diagnose the problem without physically seeing it. However there can be a variety of problems that could be wrong with your fridge. The best thing to do is to have a professional check it out. I’ve seen people fix the odor with vinegar and other cleaning supplies, but better safe than sorry. Call a pro.
@repairsolutions-m4yАй бұрын
Put a box of baking powder inside the fridge open up the top of it, and find a place for it inside. This will kill what ever odor there is. Normally this is done I been using this method for years. Replace the box once every 2 months. or 1 for best results.
@tedthornton7791Ай бұрын
Are you required to have a license to do that?
@gabrielacuna5981Ай бұрын
No, you can add Freon yourself if you feel comfortable doing so
@user-tv7ne5tg2y7 ай бұрын
Автор ролика не понимает , что делает . Есть заправочный патрубок , его и надо использовать для работы с манометром . Отверстие от проколки можно опрессовать и сняв проколку запаять отверстие . ПОНИМАШ .
@gabrielacuna59817 ай бұрын
Thanks, there are many ways to fill. This is how I did but there are different ways to do.
@user-yb5xw8kn7b8 ай бұрын
I have a Whirlpool refrigerator side by side and I'm smelling FREON, can this be fixed? It's about 19 years old
@gabrielacuna59818 ай бұрын
It sounds like you have a leak. I’ve seen evaporators leak, but could also be from the condenser or compressor. You can spray soapy water to check for leaks. It would be best call a professional to come check it out for ya if the above doesn’t work.
@repairsolutions-m4yАй бұрын
for a fridge that old, do not waste money! You will fix one leak then get another...its like having a rusted chevy from the 60s, You fix a rusted sppot, then you find 10 more...These are the type of repairs you want to skip and spoil your wife to a new fridge. Also, if you have a unit that has a control board, display board,electronic thermostat, you can recycle these to sell online. Control boards range from 140 to 380 dollars. This is money you can use towards a new fridge. Appliances are worth more in parts than the entire thing.
@HDXFH6 ай бұрын
Gotta purge out air
@gabrielacuna59816 ай бұрын
Thanks
@patriciaholiield53656 ай бұрын
How
@kotakintai8 ай бұрын
Yup sucked in all that air from the hoses and with such a small system that was a lot. This is why sometimes KZfaq videos are the worst source of info. This is NOT how you charge your system also after you put the cap on the the bullet fitting you need to unscrew the puncture screw again to avoid restricting the flow. If your fridge is leaking and you recharge it, it is just going to leak all out again, you need to find and fix the leak or at least add a stop leak product. This was a waste of time, money and bad for the environment.
@gabrielacuna59818 ай бұрын
It worked for me. Please refer to a professional if you have any leaks.
@MundiTaurusАй бұрын
@@gabrielacuna5981 You did not do it right. Doing it right would not have cost much, and been just a little more time-consuming, and not decreased the refrigerator life span. Also, keep the thing clean! :-)