How To Adjust Camber On a Car Using Camber Bolts

No video

How To Adjust Camber On a Car Using Camber Bolts - Fiesta ST

Рет қаралды 35,616

Peak Performance Reviews

Күн бұрын

Пікірлер: 91

@PeakPerformanceReviews 4 жыл бұрын

Out please note everyone! Although the way the product works is correct I need to point out yes I point to what appears to be toe and you can clearly see on the alignment readout I do but I’m trying to explain the basic fundamentals and functionality of these camber bolts and what they do and how they do it. Ignore the readout. Reality is for me I had to change my camber but chances are there may be other issue too as to my wear of which I’m going to keep an eye on. The camber bolts did make a big difference and have helped and the car feels great. Visually you can see they clearly changed the camber but weirdly my new readout from this same company shows no change other than in toe ....... which doesn’t make sense. I personally think there alignment machine doesn’t read correct or doesn’t show the graphic in the right way .... who knows but I’ll be taking it somewhere else to double check thing. But but but the camber bolts are great and clearly do what they need to do! 👍🙌

@Sparkplugsteve 4 жыл бұрын

Your reading the wrong setting in that printout. Your looking at caster. Your camber is spot on factory if 1.2 to 1.5

@PeakPerformanceReviews 4 жыл бұрын

Spark Plug Steve Ignore the printout fella the diagram is wrong rest assured the before and after confirms it was at -4 and 3.5 now been adjusted and better. I think it’s the machine printout and I get what your saying but I’ve pointed it out to them. It rings true to what’s been happening.

@Sparkplugsteve 4 жыл бұрын

@@PeakPerformanceReviews 4 degrees of camber is impossible Alex on a standard car even when it's lowered. The figures your pointing at are definatly the caster settings.

@PeakPerformanceReviews 4 жыл бұрын

Spark Plug Steve ok so riddle me this then .... why am I munching the inside of my tyres this? Incorrect caster?

@Sparkplugsteve 4 жыл бұрын

@@PeakPerformanceReviews no Caster won't cause it as your caster is still factory settings. . Toe settings and a big turbo. What's your new camber readings after the bolts.

@PeakPerformanceReviews 4 жыл бұрын

Spark Plug Steve I totally agree with what your saying about the diagrams but it goes against what they told me when we first took it in. There comments were your camber is way over and extremely negative .... which visually I agreed with. But I know what your saying and understand the science/mechanics. I’ve called them again and they can’t really explain but said yes your camber was way out.... frustrating but I know it’s the camber that needed changing.

@fordyford 4 жыл бұрын

I always wondered how these worked. That was a great demonstration of how they do. I'll be lowering my car with the Mountune springs later this month so interested to see how that affects camber when I get an allignment aferwards.

@PeakPerformanceReviews 4 жыл бұрын

Fordy Ford glad it helped and was useful, yeah 100% make sure you do, ours was on 35mm eibach’s I’m guessing the’ll make a little bit it was the other combination that made it really bad and so drastic but I’m guessing it’ll push it out a degree or two for sure.

@logansmith4215 3 жыл бұрын

My camber didnt change at all with mountune springs. What did yours do??

@fordyford 3 жыл бұрын

@@logansmith4215 not a lot lol.

@PeakPerformanceReviews 6 ай бұрын

Who still rocking theirs

@fordyford 6 ай бұрын

@@PeakPerformanceReviews yep lol. Fixed my scrubbing issue finally.

@MarcoGT5 4 жыл бұрын

Good video! This is just what I need since lowering my car nearly 2 years ago. I notice my tyres worn out very much on the inside but didn't care too much because I don't do that many miles a year. But time to get new tyres soon so makes sense to get this as well. I have the same issue on the nuts and even had to rip apart the cover on one to get it off. They put like a soft metal cover that looks nice but wears fast on these nuts. I just buy more from eurocarparts and have a few spare for when some become too worn again. Maybe a hex socket is better for loosening than a twelve point I think that's what caused the most damage on mine.

@PeakPerformanceReviews 4 жыл бұрын

MarcoGT5 thank you so so much for the kind comment glad the video was of use for you. Is it also a MK7 Fiesta ST? I’m shocked at the quality it’s awful and yeah that’s what I normally do with a 12 point also. Thanks again for watching, please stick around and subscribe as it’ll be great to have you on here bud 👍👌🤙😎

@MarcoGT5 4 жыл бұрын

@@PeakPerformanceReviews yes, I've had my mk7 now since May 2016 and plan on keeping it many more years

@PeakPerformanceReviews 4 жыл бұрын

MarcoGT5 brill! Don’t blame you such a good car, it’s got to be for sure one of the best cars ever made. It’s not about how much a car costs it’s the way it does things and the way it makes you feel 👌👍

@TheJambo2014 4 жыл бұрын

Camber wasn't too bad mate at 1.2 and 1.5. Best off using them camber bolts to just get the camber matched.

@PeakPerformanceReviews 4 жыл бұрын

Jambo F1 yeah I was looking at the wrong diagram but I threw me as the geometry place told me it needed camber adjustment badly. Also you can see how much I changed it, went back and they said great much better only for the camber to be the same on there readout. In short I’m going somewhere else to get it checked as I’m not confident at all as to what it really is sitting on however one things for sure is these camber bolts work a treat 👍

@phemmyo5146 3 жыл бұрын

I heard you can adjust camber by adjusting or moving the front sub-frame either forward or back. My car is doing this at the moment too

@PeakPerformanceReviews 3 жыл бұрын

Yes I believe you can but I wouldn’t have thought much at all without elongating holes etc but I’m not certain of this. It’s a nightmare was killing tyres and on one else seem to be able to help or tell me how to sort but this works a treat, thanks for watching. Please stick around and subscribe as it’ll be great to have you around. Where are you from?

@ibo1137 2 ай бұрын

Great video brother!

@PeakPerformanceReviews 2 ай бұрын

Thank you so much ❤️ appreciate the kind words! Please stick around and subscribe as we need more good people like you on here with us 🙌🙌

@lukasbarnes 3 жыл бұрын

Bit late mate but mishimoto or TGR are great alternative lug nuts.

@PeakPerformanceReviews 3 жыл бұрын

Oh no way I’ll check them out

@shineautomotive 4 жыл бұрын

Good bedtime watch that mate see you at Donny soon

@PeakPerformanceReviews 4 жыл бұрын

Shine Automotive cheers fella, yes bring it on bud 👍

@PeakPerformanceReviews 4 жыл бұрын

If only we were racing at Donny..... ahhhh would have literally been this weekend fella 😩😢

@ibo1137 3 жыл бұрын

You can get Mcgard wheels nuts and lock nuts. They're very high quality.

@PeakPerformanceReviews 3 жыл бұрын

I used to have a old gen 1 Focus and ran some Mcgard wheel nuts and they were awesome. That’s definitely what I should have gone for, I’ve sold the ST now so no worries now but thanks for letting me know as if I do ever need anything like that I’ll go that way. Thanks for watching fella, if you haven’t already please stick around and subscribe as it’ll be great to have you on here with us 👌👍😎

@RafaelViegas 4 жыл бұрын

great work

@PeakPerformanceReviews 4 жыл бұрын

Rafael Viegas thanks fella, thanks for watching :-)

@saulpugh2844 4 жыл бұрын

Nice video bud!

@PeakPerformanceReviews 4 жыл бұрын

Saul.PMotors thanks fella and thanks for watching again and sticking around, great to see regulars watching and commenting 😎

@Musicdjdable 4 жыл бұрын

As a Ford tech I can confirm that these lugnuts suck. All ford lugnuts with aluminum caps swell

@PeakPerformanceReviews 4 жыл бұрын

Derrick Dera ah glad a tech has confirmed! Bloody nightmare aren’t they. Thanks for watching, stick around and subscribe as it’ll be great to have you on here 👌👍😎

@Ireland103 4 жыл бұрын

How come you never fitted the braided brake lines for the big brake kit..? Looks like you are running the standard rubber ones? Off topic I know but just wondering

@PeakPerformanceReviews 4 жыл бұрын

Cathal Finegan no totally good question and I’ll be honest with you I didn’t even noticed when installing the camber bolts. We had a problem before a Trackday and needed to replace them quickly until we got some more. Since then I haven’t fitted the new ones I now have. Didn’t have time this day to do it bleed etc. Funny enough they are going on today 👍 good eagle eyes 👍

@clarkmartinpineda2765 2 жыл бұрын

Hey mate thanks a lot for sharing. Where can I buy the camber bolts?

@PeakPerformanceReviews 2 жыл бұрын

Pumaspeed or Burton power are the two I found and know of. Thanks for watching fella and glad you enjoyed or found it useful. Please stick around and subscribe it’ll be great to have you around 🙌👍😎

@danielseddon6138 3 жыл бұрын

Good video pal

@PeakPerformanceReviews 3 жыл бұрын

Thanks fella, a few people comment sometimes like it’s not super technical but it doesn’t need to be, this is the basics of how you fit and adjust this product and it works a treat, geometry and alignment needs to be done by people with the right equipment but I did say that so I’m glad loads of people have found it helpful 👍👌😎 thanks for watching, please stick around and subscribe as it’ll be great to have you around 👍👍

@PierreDonald 8 ай бұрын

What was FORD thinking with these wheel nuts, absolutely ridiculous

@PeakPerformanceReviews 8 ай бұрын

100% I think they could have made them stronger if they used Cheese or Chocolate, scary really and shame as the motor and chassis is mega 🙌

@C0yf1sh 2 жыл бұрын

Other than never using an impact on em I’ve never seen anyone be able to keep them from swelling or ripping to shreds

@PeakPerformanceReviews 2 жыл бұрын

Mine never saw an impact gun haha bloody chocolate! So bad, worse I’ve ever seen and many concur, thanks for watching fella 🙌👌😎

@sirhcmi3 Жыл бұрын

Don’t adjust the camber. Drive more aggressively on twisty roads. 😊

@PeakPerformanceReviews Жыл бұрын

Haha, there’s always loads I can’t put on KZfaq 😅😂

@eazytrese 3 жыл бұрын

What's the size of the camber bolt used for Ford Fiesta?

@PeakPerformanceReviews 3 жыл бұрын

Hello fella they are 12mm, hope this helps. Thanks for watching, please stick around and subscribe as it’ll be great to have you around 🙌😎

@fadedndrunk 3 жыл бұрын

Is it possible to adjust camber bolt with wheel on the car?

@PeakPerformanceReviews 3 жыл бұрын

Yes (possible) but not a good idea and not likely. Car and weight needs to be unloaded ideally.... but you could technically do it with it on but it would be pretty damn awkward.

@5thgearouttahere 4 жыл бұрын

4°! Not a moment too soon to get that fixed. Pretty shocking as an Aussie to see just how much the climate (and salt I assume) affects the condition of your underbody even on a young car.

@PeakPerformanceReviews 4 жыл бұрын

5thgearouttahere how quick it was killing tyres was unreal so yep needed sorting and now it’s perfect so a great fix. Thank you so much for watching and for commenting. Please stick around and subscribe as it’ll be great to have you on here with us 👍👌😎 what car do you have?

@5thgearouttahere 4 жыл бұрын

@@PeakPerformanceReviews Already subscribed, my hope is to build my own track day and racing Ka. I have a GT86 with the Brembos and Sachs dampers, my first sports car and loving it!

@PeakPerformanceReviews 4 жыл бұрын

Thank you so so much fella I really appreciate that, that would be epic, let me know when you do that honestly I’d love to see it

@Foxtrot2500 4 жыл бұрын

What was your torque spes top and bottom?

@PeakPerformanceReviews 4 жыл бұрын

Foxtrot2500 88nm (65 lb ft of torque) they are the 12mm bolts Thanks for watching, please stick around and subscribe as it’ll be great to have you on here 👍👌 This may help also - www.whiteline.com.au/docs/install_guides/Z201A.pdf

@adamrob9464 3 жыл бұрын

What spec camber bolts would i need for focus st 2015?

@PeakPerformanceReviews 3 жыл бұрын

If you put you car into the whiteline they should tell you what version you need. Let me know if you get stuck and I’ll get in touch with someone otherwise.

@adamrob9464 3 жыл бұрын

@@PeakPerformanceReviews thank you

@PeakPerformanceReviews 6 ай бұрын

🙌

@VtecEcky 3 жыл бұрын

Dude just use a 20mm socket workes fine with mine😉

@VtecEcky 3 жыл бұрын

On the wheel nuts

@PeakPerformanceReviews 3 жыл бұрын

Haha legit or are you joking? ….. I have to say I do always try it …. But from experience now not a good idea. I find it’s another good way or mincing these bloody nuts more haha 😂 damn bloody things lol 😂

@Rocketman-ps2if 2 жыл бұрын

What camber bolts did you get?

@PeakPerformanceReviews 2 жыл бұрын

They are Whiteline 12mm adjustable camber bolts. Thanks for watching fella ✅🙌👌

@Rocketman-ps2if 2 жыл бұрын

@@PeakPerformanceReviews I looked on there, I’ve got a 2018 Ford Focus SE and there were none available for my car, any other suggestions?

@PeakPerformanceReviews 6 ай бұрын

Sorry only just seen this, any good make ones that are reputable would be fine

@Stevenrogers274 4 жыл бұрын

You got the camber and caster reading mixed up

@PeakPerformanceReviews 4 жыл бұрын

I know, I think I was looking through the camera and not reading it right, thing is the readings we were given didn’t look right and were proven to be appear wrong anyway. There’s no way if you had seen my car that the camber was where they said it was, it was confirmed when we had taken it to the other garage. Main thing is also the camber bolts worked a treat and did everything I needed them to do. My tyres are excellent now and lasting longer.

@Stevenrogers274 4 жыл бұрын

Peak Performance Reviews yes true thats main thing, i didnt know these camber bolts actually worked until i seen you video so will be getting some for my car. I thought you need a elongated hole for the camber adjustment, but i guess not.

@PeakPerformanceReviews 4 жыл бұрын

They are an absolute gem of an item for the money and worked a treat for me, surprising how much adjustment you can get with them too, thanks for watching fella 👍👍

@fredflintstone2077 4 жыл бұрын

Why don't you just buy a cheap magnetic camber gauge for £10?

@PeakPerformanceReviews 4 жыл бұрын

It was a bit of a rush job, 100% agree mate and that’s the way to go for sure. Realistically I knew if I get these on and sorted the garage could do the rest 👍👍

@phemmyo5146 3 жыл бұрын

On the bolt, remove yhe outer skin......simple

@PeakPerformanceReviews 3 жыл бұрын

Hello fella, I’m not sure what you mean?

@phemmyo5146 3 жыл бұрын

@@PeakPerformanceReviews there is an outer skin on the lugnut like a soft aluminium..... remove it with cutter or pliers anything. Then use socket size 18 to bolt or remove log nut to and from wheel. thats it

@PeakPerformanceReviews 3 жыл бұрын

@@phemmyo5146 oh really that’s epic, ok that’s great to know thanks fella! Can’t believe I haven’t heard that 🙌 thanks fella