How to Adjust Motorcycle Engine Valve Clearance

Рет қаралды 867,900

8 жыл бұрын

One of the most important factors affecting valves temperature is that of valve lash or tappet clearance or valve clearance. Insufficient clearance will result in the valves contacting the seats for a shorter time and consequently operate at higher temperatures. Excessive clearance will result in noisy operation and loss of power. Great accuracy should therefore be used when adjusting valve clearance.
This video shows how to check and adjust the valve clearance in a motorcycle engine.
Especially for Honda Karisma 125D.
Tools:
1. Screwdriver
2. 8 & 9 mm box-end wrench
3. Pliers
4. Feeler Gauge
5. 17 mm socket wrench

Пікірлер: 678

@chandtara4346 7 жыл бұрын

Dear Sekolah you are very intelligent and described in a crystal clear way that is a great way of helping peopleThanks for the such informative description

@sekolahonlineteknikotomotif 7 жыл бұрын

+chand tara You're welcome. I'm glad if my video are helpful.

@migzbenavidez 3 жыл бұрын

Im actually impressed how he demonstrated and narrated what to do..keep it up :)

@sekolahonlineteknikotomotif 3 жыл бұрын

Thank you so much for your appreciation :D

@bulletclub4life 7 жыл бұрын

I understood this better than the other videos, you actually show close up what you are doing.

@sekolahonlineteknikotomotif 7 жыл бұрын

+HASE Thanks. I really happy if my videos can help people.

@yokitpunzalan8159 7 жыл бұрын

HASE s

@alexnoga6879 6 жыл бұрын

HASE

@jasonmaglinao9391 4 жыл бұрын

Great tutorial. I appreciate that you offered a close up and detailed view of what you were doing.

@sekolahonlineteknikotomotif 4 жыл бұрын

Thank you so much for your appreciation!

@Tool19672 8 жыл бұрын

Thanks for the video . From the looks of those caps you have had them off and on several times . Glad you got it figured out .

@sekolahonlineteknikotomotif 8 жыл бұрын

Haha, yah you're right. It's a little bit difficult to let them off, because its bolt was rounded.

@masjosh 8 жыл бұрын

This is one of the best tutorial videos I have ever seen. Great work and Thank you

@sekolahonlineteknikotomotif 8 жыл бұрын

+masjosh Thanks.

@johnobvious1033 6 жыл бұрын

Thanks man! Nice video. I'll bet it was annoying to get the camera angles set up right to get the valve adjustments, but I really appreciate your taking the time to do it.

@sekolahonlineteknikotomotif 6 жыл бұрын

Yes, that's absolutely true. It's a difficult angle, plus, my hand is dirty. Anyway. Thank you, thank you very much for your appreciation 👍

@TheMediaclark2011 5 жыл бұрын

Good Dude.. you end my expenses on going to a mechanic every month for expensive tune up! 2 thumbs up for you! god bless you!

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you very much for your appreciation. Well, reduced expenses. I'm happy to hear that!

@user-xr9sq8ie6z 3 жыл бұрын

I need namber the feeler

@pcerr 5 жыл бұрын

Very clear explanations! Crystal clear video. Keep up the good work. Thank you for posting this video✌️😀

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you very much for your appreciation 👍

@MrCRS55 7 жыл бұрын

Very Clear demonstration, easy to understand. Thanks sharing.

@sekolahonlineteknikotomotif 7 жыл бұрын

+MrCRS55 Thanks for your appreciation👍

@ronaldodomacena9347 7 жыл бұрын

i actually learned how to adjust my valve clearance on this video thanks a lot :-) you're a big help

@sekolahonlineteknikotomotif 7 жыл бұрын

+ronaldo domacena Thanks for your appreciation! I'm very happy to hear that.

@keithburns5707 4 жыл бұрын

Honda has really good schools to train mechanics I went to one of them and it dealt mainly with tuneups there they described a valve adjustment by using the go-no go method. that means you’re putting your .003 mm gauge in but you use the .004 feeler gauge to verify that you have a perfect .003 mm. If the three goes in but the four doesn’t then it’s definitely the .003 mm. If you use this method it will make you a much better mechanic.

@sekolahonlineteknikotomotif 4 жыл бұрын

Thank you so much for your opinion, that's really informative!

@keithburns5707 4 жыл бұрын

Sekolah Online Teknik Otomotif You’re welcome I have one more tip that I noticed might help you when you’re trying to stick your feeler gauge in between the tappet and the valve take your feeler gauge and run it across the round part of a screwdriver to put a curl in it this will make it easier for you to stick the feeler gauge in good luck

@sekolahonlineteknikotomotif 4 жыл бұрын

Aha all right! Thank you again for your info! 😀👍

@jangacharyguntoju9493 4 жыл бұрын

You deserve appreciations. The way you explaining marvellous 👌👍👍

@sekolahonlineteknikotomotif 4 жыл бұрын

Thank you so much for your appreciation 🙌😀

@Cavejohnson5353 6 жыл бұрын

Thank you very much for making this video! Very well explained and easy to understand... Cheers!

@sekolahonlineteknikotomotif 6 жыл бұрын

+Hafiz Asim Thanks for your appreciation, Hafiz! 👍👍👍

@familytrip2307 5 жыл бұрын

Sukses terus ya mas, saya follow sejak 3 tahun lalu terimakasih ilmu nya walau saya bukan mekanik.

@sekolahonlineteknikotomotif 5 жыл бұрын

Terimakasih untuk apresiasinya. Semoga bermanfaat ilmunya mas 👍

@theadventureofwave1002 5 жыл бұрын

You the man! kudos young mechanic! :D thank you so much for this video

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you very much for your appreciation 👍 Good luck with your DIY

@kbk12356 5 жыл бұрын

I am a korean Honda super cub repair is very helpful thanks^~^

@sekolahonlineteknikotomotif 5 жыл бұрын

I'm also happy to hear that. Thank you 👍

@raistub 7 жыл бұрын

Great quality video. Details are good. Thank you. Really helped me.

@sekolahonlineteknikotomotif 7 жыл бұрын

+Rais Jufel R You're welcome.

@asadacidleo3425 7 жыл бұрын

thanks bro for uploading a very good video for valve adjustment... camera working is very good...

@sekolahonlineteknikotomotif 7 жыл бұрын

+Asadacid Leo Thanks for your appreciation too!👍

@mateusangolar2881 4 жыл бұрын

i am watching this video in 2020. i am going to apply the technique so solve the Noise of the valve in my SYM bike. thank you SEKOLAH.

@sekolahonlineteknikotomotif 4 жыл бұрын

Thank you for your appreciation! 😀 I hope you can solve the problem on your bike. Good luck!

@pushparairai7407 7 жыл бұрын

hello! bro, good job sharing knowledge to me.t.y.to u n my fren regarding the rocker arms adjuster, say for stand. how to get the 0.03 adjuster scale.

@DustySquitoNM 7 жыл бұрын

Feeler gauges have always felt a bit like black magic to me. They never really made sense because I never had someone show me in person. Still, your video really helped me a lot with my valve adjustment on my bike. Thanks, man!

@sekolahonlineteknikotomotif 7 жыл бұрын

+dustysquito Thanks for your appreciation. I really happy to hear that!

@mryoso866 6 жыл бұрын

Sekolah Online Teknik Otomotif hi sir can I chat with you about my problem in motorcycle?

@sekolahonlineteknikotomotif 6 жыл бұрын

Sure. Feel free to send your questions via KZfaq comments. Thank you.

@kennethvillarosaarceo2629 5 жыл бұрын

very helpful info tnx bro and check the valve spring if it is weak

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you for your appreciation. Yes, you should check your valve spring when overhauling cylinder head.

@kingfreemovies6558 7 жыл бұрын

thanks bro for the explanation now i know how to tuneup my motorcycle

@sekolahonlineteknikotomotif 7 жыл бұрын

+Emil Post Thanks! I'm glad you can be helped by this video.

@daviddefortier5970 4 жыл бұрын

I apreciate that you try your best to speak english. Please keep up the effort

@sekolahonlineteknikotomotif 4 жыл бұрын

Thank you very much for your appreciation! 🙌

@erwinbanday2894 7 жыл бұрын

Thanks for your video I learn more for the engine and I understand.

@sekolahonlineteknikotomotif 7 жыл бұрын

+Erwin Banday I really happy to hear that. Thanks!

@boniboss1326 7 жыл бұрын

thanks so much you which kind of issue we need to check the clearance

@sekolahonlineteknikotomotif 7 жыл бұрын

+boni boss You're welcome.

@whimsymaker 6 жыл бұрын

Clear and to the point...great job!

@sekolahonlineteknikotomotif 6 жыл бұрын

Thank you very much for appreciation 👍

@jeffreyinlao9515 7 жыл бұрын

nice one sir...i'll going to follow ur page for more tutorial...thx for d info man...

@sekolahonlineteknikotomotif 7 жыл бұрын

+Jeffrey Inlao Oh, ya. Thanks for your appreciation. 👍

@gabrieltianero6925 6 жыл бұрын

I'll surely try this step by step process of yours. Its amazing and good job bro.

@sekolahonlineteknikotomotif 6 жыл бұрын

Thank you very much for your appreciation 👍 And good luck with your work!

@wingbutler 5 жыл бұрын

Great diction, man. Subscribed!

@sekolahonlineteknikotomotif 5 жыл бұрын

Thanks for your appreciation 👍

@natangburek8979 2 жыл бұрын

Siau aku ingat siam pilipin viekong tadi Lool All the best

@cheapkickspinas3921 6 жыл бұрын

Thumbs up for the instruction. But you forgot a important thing, first is to remove spark plug to release preasure of the engine for accurate valve clearance..

@sekolahonlineteknikotomotif 6 жыл бұрын

+Martin Apostol Thank you very much for your appreciation. If you can align the notch perfectly, I believe you can adjust your valve clearance accurately. Anyway, thanks for your suggestion!

@dionirvingtimbang5212 8 жыл бұрын

Any suggestion or troubleshoot a suzuki smash backfires and how to treat it. Hope you make a video. Thanks and more power

@sekolahonlineteknikotomotif 8 жыл бұрын

Severe backfire? My suggestion is you should clean the carburetor and then re-setting the idle mixture adjusting screw and the idle speed adjusting screw.

@dionirvingtimbang5212 8 жыл бұрын

+Sekolah Online Teknik Otomotif oksir thank you. i willtry it tonight.hope u post more videos.

@sekolahonlineteknikotomotif 8 жыл бұрын

Ok, good luck.

@glennlayaguin 2 жыл бұрын

Thanks for sharing idol nice one video very informative idol

@sekolahonlineteknikotomotif 2 жыл бұрын

Thank you for your appreciation :)

@entingbhetoycolags9952 6 жыл бұрын

Sir, do you know the measurement valve adjustment for honda cbr 150r 2011 model?

@Mattd252 3 жыл бұрын

Good video - you explained it well. Very helpful.

@sekolahonlineteknikotomotif 3 жыл бұрын

Thank you for your appreciation :)

@anton161 7 жыл бұрын

can you showcase a vega force i adjusting the valve clearance and other adjustments like spark plugs, etc.

@sekolahonlineteknikotomotif 7 жыл бұрын

+makoy161 Thanks for your request, but unfortunately we have no Yamaha Vega Force for makig that particular video. But I think, on similar mechanism types or components, you can follow our instructions for your particular motorcycle.

@pvsmouli7727 6 жыл бұрын

nice work dude thanks for the video

@sekolahonlineteknikotomotif 6 жыл бұрын

+pvs Mouli Oh, thanks for your appreciation 👍

@marloubalag6528 8 жыл бұрын

hi idol tnx for very informative and very helpful..ur not jus motorcycle mechanic ur mechanic also a 4wheels huh.nice may I know what's the right gauge for the valve clearance of my vegaforce 115cc engine specially intake and exhaust...?and I want to know if same procedure if I do it to my Vega the t mark of crank cover and the timing mark.do the same to Honda??

@sekolahonlineteknikotomotif 8 жыл бұрын

I have no reliable data or information resources for Yamaha Vega Force engine valve clearance, but as we know that Yamaha Vega Force have similar engine (and valve) to Yamaha Jupiter Z1, it seems we can use the same specification data with Yamaha Jupiter Z1 to Vega Force. Jupiter Z1 have 26 mm intake and 21 mm exhaust valve diameter, and Vega Force was the same. So, this is Yamaha Jupiter Z1 engine valve clearance (when cold): Intake valve: 0.08 mm - 0.12 mm Exhaust valve: 0.08 mm - 0.12 mm the procedure is a little bit different, you need to open cylinder head cover to adjust valve clearance, and the mark on the generator rotor maybe only the "I" line-shaped. I hope this helps.

@Flumphinator 8 жыл бұрын

Very informative.

@sekolahonlineteknikotomotif 8 жыл бұрын

Thanks

@Zenx4rr 5 жыл бұрын

Hello I just want to ask. Even though marks are not that much aligned tho I can move the valves with my bare hands can I start the adjustment? Because I cant align the mark keep moving its like it has a spring i cant align those mark I made a lot of turns

@sekolahonlineteknikotomotif 5 жыл бұрын

If you can't align the mark perfectly, try to remove the spark plug. Then try again to align the mark. Good luck!

@hodgiemodough 6 жыл бұрын

Great video! Very helpful!

@sekolahonlineteknikotomotif 6 жыл бұрын

Thank you, thank you very much for your appreciation!

@zhairickfrezther768 5 жыл бұрын

..sir slamat po sa kaalaman gusto q sna itanuh sa inio na pare-preho pi ba lht ng klase ng motor sa pag tune up..bka ppwde nio ibhage skin ang inio kaalaman ...taus puso po aq mag papaslmat po...god bless u sir..

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you very much for your question. Actually, I'm Indonesian. So I don't understand your language. Please use only English.

@mckav2358 3 жыл бұрын

Very helpful thankyou

@jhonbuagas7433 7 жыл бұрын

thank you very much for clear explanation

@sekolahonlineteknikotomotif 7 жыл бұрын

+Jhon Buagas Ya, you're welcome.

@jerryjeremy4038 6 жыл бұрын

Sir may I request you to make a tutorial vid on how to detach and attached Fuel Injector of Yamaha Sniper 150 please?

@sekolahonlineteknikotomotif 6 жыл бұрын

+Jerry Jeremy I hope I could make that particular video, if I have a chance. Thanks for your video request.

@dontdropitlikeustoleit2012 8 жыл бұрын

help me alot do u have a video of how to change a valve seal?

@sekolahonlineteknikotomotif 8 жыл бұрын

Unfortunately the video about how to replace the engine valve seal are not yet made, but if one day there is an opportunity and time, I will make this video request. Thanks.

@jasonang2756 7 жыл бұрын

rikues dong mas, perawatan & setting mesin standar FU carb. terutama bagian2 yg ada penggantian part berkala, misal clutch plate, brake master cyl, dll sukses terus :)

@sekolahonlineteknikotomotif 7 жыл бұрын

+Jason Ang Trmks utk requestnya. 👍 Mdh2n klw ad kesempatan ya kang.

@aakersalonga2955 7 жыл бұрын

ex. of valve clearance standard of suzuki shogun pro 125? any suggestions?

@greenbee8134 5 жыл бұрын

Very informative informatio.. Do you have an idea of the valve clearance of rouser 135?

@davemaximo9952 5 жыл бұрын

antatanga nia.common sense lang.any adjustment from 0.03 to 0.06.kung san kau komportable

@goddest84 6 жыл бұрын

Do you have idea on valve clearance of KLX150L bro?

@sigolitis 5 жыл бұрын

i have a kawasaki max100 same with an90 cant find the valves clearance no manual .very nice video by the way gratz and greetings from greece

@sekolahonlineteknikotomotif 5 жыл бұрын

Unfortunately I don't have the repair manual for that particular bike. By the way, thank you so much for your appreciation.

@johnshanks7902 6 жыл бұрын

Great video thank you

@sekolahonlineteknikotomotif 6 жыл бұрын

You're very welcome 👍

@buhaydriverjotv9593 5 жыл бұрын

ya ok, can you have valve. a clearance of intake ,& exhause of SYM 110 2015 Model?

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you for your question. Unfortunately, I don't have the repair manual for that particular model. I'm sorry.

@kosalmorn72 7 жыл бұрын

I like all your videos So much ce

@sekolahonlineteknikotomotif 7 жыл бұрын

+Kosal Morn Oh thanks :)

@naysoehtun6129 4 жыл бұрын

I appreciate it Sir. It will be quite useful Sir.

@sekolahonlineteknikotomotif 4 жыл бұрын

Thank you very much for your appreciation 😀

@nabilsyahmi3514 6 жыл бұрын

Sir, do you know what is the appropriate valve adjustment for binelli keeway tx200 (BK tx200)?

@sekolahonlineteknikotomotif 6 жыл бұрын

Unfortunately, we have no repair manual for that particular motorcycle. Sorry.

@redweedes8880 7 жыл бұрын

can also adjust the cam shaft chain if there is adjustment available?

@sekolahonlineteknikotomotif 7 жыл бұрын

I don't really understand what this question mean. Please clarify again. Thankyou.

@onekeyngabolang7984 7 жыл бұрын

mantab bro....lanjutkan tambahan info yg lain

@sekolahonlineteknikotomotif 7 жыл бұрын

+hengky turnado Ok kang, trims utk dukunganny.

@272706bry 8 жыл бұрын

thanks man it helps me a lot..best tutorial video..

@sekolahonlineteknikotomotif 8 жыл бұрын

Thanks.

@cheeyuktong4205 7 жыл бұрын

sir, my gauge does not have 0.03, my lowest gauge is 0.5,. if I am able to adjust the valve of my honda dash, what is the right gauge for it, and what am I going to use in mm. thanks.

@sekolahonlineteknikotomotif 7 жыл бұрын

+shok tong I think you're using car feeler gauge which is more thick, try to use motorcycle feeler gauge. Unfortunately, we have no info about Honda Dash valve clearance, because there's no Honda Dash in Indonesia. Maybe you can search on Google for that specification. Thanks.

@geogeo8880 6 жыл бұрын

thank you for sharing sir more power

@sekolahonlineteknikotomotif 6 жыл бұрын

+Geo Lugtu Thanks for your appreciation too👍

@rexlimbo5656 7 жыл бұрын

Thanks to this video. Btw is this applicable to yamaha mio/amore scooter? And .03 is universal standard clearance of valve? Thank you

@sekolahonlineteknikotomotif 7 жыл бұрын

+rex limbo Basically, this procedure is applicable to manual adjusted valve mechanism. And yes, to Yamaha Mio. But the 0.03 mm size is not universal standard. Check your repair manual for that particular valve clearance size. Thank you.

@kalmadolng8405 8 жыл бұрын

very nice tnx man nw i knw how to adjust my bike

@sekolahonlineteknikotomotif 8 жыл бұрын

+Puppy214 Wowo Ok, thanks.

@sekolahonlineteknikotomotif 8 жыл бұрын

+Puppy214 Wowo Ok, thanks.

@summer5846 6 жыл бұрын

is there any changes if I replaced my stock camshaft to a higher lift camshaft.

@sekolahonlineteknikotomotif 6 жыл бұрын

+jeepney joyride Yes, you can replace your stock camshaft, but as far as I know, it would need different valve clearance (size). Good luck 👍

@jhaes1360 5 жыл бұрын

Can you help me sir. My wave 125 was refreshed but then we discover that the oil was not go through on the valve clearance my mechanic cant figure out whats the problem. We change the oil pump ang piston already.Thank you for any advice/help.

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you for your question. Firstly, you have to make sure the oil is sucked from the oil pan to the oil pump outlet. How was the result?

@kerzeratechgaming7024 6 жыл бұрын

How tight is the locknut bro? Because when tightening the lock nut the valve clearance becomes tight even though im using a plier to secure the adjusting screw. It should not be super tight isnt it? Just a few turns will be fine?

@sekolahonlineteknikotomotif 6 жыл бұрын

+Moto Adventurer You need to see your repair manual for more precise torque, and it would be better if you use the torque wrench. However, if you don't have one, use your best knowledge/experience and feeling when tightening the locknut. Try to hold the adjusting screw as motionless as possible, you can use special plier or an SST L-shaped valve adjusting screw wrench. Good luck 👍

@ericredraj3558 7 жыл бұрын

thanks a lot. greetings from Philippines

@sekolahonlineteknikotomotif 7 жыл бұрын

+Eric redraj Oh ya, very nice Philippines 👍

@lancerizon966 7 жыл бұрын

thanks for the clear video sir... i think i know to adjust my wave 125 valve clearance now... i think we have the same feeler gauge size .03mm for my honda wave..i hope you can provide more video specially how to tune up engine adjusting air in carburetor thank you so much

@sekolahonlineteknikotomotif 7 жыл бұрын

+lance rizon Ya, you're welcome.

@eleuteriorizon988 7 жыл бұрын

hi sir thanks for your video I actually succeed adjusting my valve clearance.but my problem again my throttle if I give gasoline the engine will stop please help me

@sekolahonlineteknikotomotif 7 жыл бұрын

+ELEUTERIO RIZON Oh ya, I'm happy to hear that. But could you please explain what does "if I give gasoline" mean? Did you mean idle up?

@joelpajarillo3707 7 жыл бұрын

try to clean the airbox and the carbuator if the problem is still there check the gas pump maybe your gas pump is not good anymore

@sekolahonlineteknikotomotif 7 жыл бұрын

+Joel Pajarillo 👍

@seguiakura5584 7 жыл бұрын

Thank you Folks great help👍👍👍

@sekolahonlineteknikotomotif 7 жыл бұрын

+Segui Akura Thanks for your appreciation too 👍

@diosdadojr.manghino8518 6 жыл бұрын

It is the same method of tuning in xrm110? Is the valve clearance the same?

@sekolahonlineteknikotomotif 6 жыл бұрын

+Diosdado Jr. Manghino Actually, I don't have much experience on XRM110. But, basically, the method for adjusting the valve clearance is nearly similar. Unfortunately, I don't have a repair manual for XRM110, but most people said that the valve clearances for XRM110 are 0.04mm (IN) and 0.06mm (EX). I'm glad to hear how is the result. Good luck for your project!

@ichromelast7701 7 жыл бұрын

what is the valve clearance of honda xrm 125?

@P.Em. 6 жыл бұрын

Thank you for posting it, it made more sense to me now, Good Job! Does this method also apply with GY6 scooter engines?

@sekolahonlineteknikotomotif 6 жыл бұрын

+Pippen E Thank you very much for your appreciation. But, I'm sorry, unfortunately I have no idea for that particular engine. Maybe you can try to find it on the other resources. Good luck.

@herminigildodelacruzjr1752 7 жыл бұрын

ok thank you again nice video

@_wrhrdz 2 жыл бұрын

Hello, i have a question. Does during top dead centre both valve (intake n exhaust) are closed? Should i just simply adjust the locknut with the mentioned measurement using filler gauge?

@sekolahonlineteknikotomotif Жыл бұрын

Yes, when the piston is at TDC (end of compression stroke), that is the best position/timing to adjust both valves.

@anthonyr6555 6 жыл бұрын

I can't insert my feeler gage 003. I don't won't to brack the manufacturer's seal ?. First time trying to fix. The cam spring is touching the adjuster nut is that ok. Dose the nut scrow in the cam spring? Thx

@sekolahonlineteknikotomotif 6 жыл бұрын

In our particular engine, (Honda Karisma 125) the adjuster bolt & nut stay on the rocker arm. Thus, the adjustment doesn't affect the cam spring. Only use the correct size for your particular engine (is it correct to use 0.03 mm for your engine?). If you can't insert the feeler gauge, try to make the gap wider by turning the bolt on counterclockwise direction. Then, adjust the valve clearances to the correct size (manufacturer's recommendations). Good luck!

@anthonyr6555 6 жыл бұрын

The bike is an ssr125cc yes it recommends feeler .003 ok I will try. The lock nut is the same as yours

@rowellmartires9423 7 жыл бұрын

When i turn the flywheel to Top dead center.. is it okay to adjust valve clearance if the marking on the cam timing is not in position..

@sekolahonlineteknikotomotif 7 жыл бұрын

+xander blythe It's called "top dead center" if the notches were aligned. So, it's highly recommend to align the notches on TDC position before valve clearance adjustment. Thank you.

@rowellmartires9423 7 жыл бұрын

Thank you for your reply... Do you have videos on how to set cam timing?

@sekolahonlineteknikotomotif 7 жыл бұрын

+xander blythe Oh, I haven't yet. But if I have time and opportunity I will make this video request. Thank you.

@rowellmartires9423 7 жыл бұрын

Why is my T mark wont allign with the notch.. the flywheel slips when i allign it on the notch

@sekolahonlineteknikotomotif 7 жыл бұрын

+xander blythe Yes, it may happen. But try hold for a while in align position. I hope it helps.

@SuperPertinax 7 жыл бұрын

Thank you very much

@sekolahonlineteknikotomotif 7 жыл бұрын

+SuperPertinax Ok, you're welcome.

@devenderkachhawaha1787 7 жыл бұрын

SuperPertinax

@jaysonsardon9626 7 жыл бұрын

very nice and good idea.

@sekolahonlineteknikotomotif 7 жыл бұрын

+jayson sardon Thanks.

@xtiancarpio 5 жыл бұрын

do we need to remove the spark plug for the wave 100 before getting the TDC

@sekolahonlineteknikotomotif 5 жыл бұрын

Yes, you may need to remove the spark plug if you find it difficult to align the notches.

@joemarievista1354 5 жыл бұрын

Sir,why my kawasaki fury the gear is continues changing 4rth gear into neutral. Tnx

@sekolahonlineteknikotomotif 5 жыл бұрын

I can't predict the malfunction. You need to disassemble the transmission, and then check the faulty components. Good luck.

@philipvillar9428 6 жыл бұрын

my question is gauge the same the upper n lower ,for there so many say not the same,n some say is the same what is true

@sekolahonlineteknikotomotif 6 жыл бұрын

+Philip Villar Different engine may have different valve clearances. So it's highly recommended to see the sizes on repair manual. Thank you.

@joeybernabe7963 6 жыл бұрын

Great explinition man..

@sekolahonlineteknikotomotif 6 жыл бұрын

+Joey Bernabe Hey, thanks for your appreciation 👍

@joeybernabe7963 6 жыл бұрын

Sekolah Online Teknik Otomotif welcome sir

@rpyordan 7 жыл бұрын

nice video sir, any way sir, can I apply that to my Kawasaki wind 125 engine sir?? thanks!

@sekolahonlineteknikotomotif 7 жыл бұрын

+Rogem Yordan Basically, yes, I think this procedure principle can be applied to your Kawasaki.👍

@jaimepicornell5773 6 жыл бұрын

Very Good Work

@sekolahonlineteknikotomotif 6 жыл бұрын

+Gen Jimmy Hei, thanks for your appreciation 👍

@coolrider7823 3 жыл бұрын

What is the inlet and exoust valve value for Lifan KPR 165 cc FI

@sekolahonlineteknikotomotif 3 жыл бұрын

I'm sorry I don't have the repair manual for that one

@gammaone9751 7 жыл бұрын

Sir, you're motorbike is a replica of mine ( Rusi swish 100cc) can i do the same method you used in this video? or not?

@sekolahonlineteknikotomotif 7 жыл бұрын

+Bahala naa wala akong maisepp Oh replica? Is your Rusi engine components have similar type with Honda Karisma?

@gammaone9751 7 жыл бұрын

I can't say it's a fully replica but the company said that they make thier own engines, so i can't guarantee that ur method can work with my engine, also im new to motorbikes so i don't have too much knowledge to it

@sekolahonlineteknikotomotif 7 жыл бұрын

+Bahala naa wala akong maisepp Well, if so, I think you should see your particular motorcycle repair manual for proper maintenance procedures.

@gammaone9751 7 жыл бұрын

Sekolah Online Teknik Otomotif ok thanks 👍

@mingming656 6 жыл бұрын

Gamma One , dont you think that your bike is the replica? Judging from what you said" rusi" manufactures replicas of honda motorcycles, at least with the flairings only. Lol

@TorQue_WrenCh 5 жыл бұрын

I also had honda 125,but in the manual says 0.10mm on intake valve and 0.17mm on exhaust valve..beside 0.03 is too small,engine can't be started at all

@sekolahonlineteknikotomotif 5 жыл бұрын

Thank you for your feedback. In this video we use proper repair manual for Honda Karisma 125, and yes we use the proper size for the clearances according to the manual. Maybe you have different engine type regardless the same engine capacity (125 cc).

@jennycartagena4684 7 жыл бұрын

Very nice video..CAN YOU PLEASE MAKE A VIDEO ON HOW TO CHANGE THE VALVE SEAL OF A HONDA WAVE 100CC THANKS

@sekolahonlineteknikotomotif 7 жыл бұрын

+Jenny Cartagena Thanks for your appreciation. Your video request will be queued.

@sekolahonlineteknikotomotif 7 жыл бұрын

+Jenny Cartagena Thanks for your appreciation. Your video request will be queued.

@sekolahonlineteknikotomotif 7 жыл бұрын

+Jenny Cartagena Thanks for your appreciation. Your video request will be queued.

@paulsimpliciano 7 жыл бұрын

thanks for a very informative tutorial. may i know the clearance of honda beat110?

@sekolahonlineteknikotomotif 7 жыл бұрын

+Ephraim Paul Simpliciano Fuel injection or carburetor Honda Beat 110?

@paulsimpliciano 7 жыл бұрын

Carburator sir 2015 model

@sekolahonlineteknikotomotif 7 жыл бұрын

+Ephraim Paul Simpliciano Oh, in Indonesia Honda Beat 2015 is a carbureted engine. Where do you from? But, anyway, this is the valve clearances: Honda Beat (Carb.): IN=0.16mm, EX=0.16mm (both, plus-minus 0.02mm)

@paulsimpliciano 7 жыл бұрын

Yeah its carburated sir. I'm from Philippines. Thanks a lot. This really helped me. God bless!

@sekolahonlineteknikotomotif 7 жыл бұрын

+Ephraim Paul Simpliciano You're welcome.

@sadatelian6765 7 жыл бұрын

Tnx for this video

@sekolahonlineteknikotomotif 7 жыл бұрын

+Sadat Elian You're welcome.👍

@munkeemunks 6 жыл бұрын

great video! Im Planning to diy my own valve clearance of my '13 Honda Future 125 Which has the similar engine. Thing is, the stock O Ring of the Honda Future always have minor leaks. So i was wondering, is it possible if i just cut a piece of gasket paper with the same size of the tappet adjusting cover and use that instead of the o ring? Thanks!

@sekolahonlineteknikotomotif 6 жыл бұрын

+Munkee Munks Thanks for your appreciation! Well, the repair manual usually recommend you to change the old stock O-ring that causes leaks. However, it's possible to stop the leakage by adding sealant to the old stock O-ring or, as you said, using gasket paper. Personally, as recommended by the manufacturer, I prefer to change the old O-ring with the new-original one as it would be long lasting component. Good luck with your DIY!

@munkeemunks 6 жыл бұрын

Sekolah Online Teknik Otomotif so i guess if i change the o ring and adding the paper gasket on top of it, it'll be more effective?

@sekolahonlineteknikotomotif 6 жыл бұрын

+Munkee Munks The manuals recommend us to "just" change the O-ring, and as far as I know, it is faster and easier (or even cheaper!). Good luck!

@munkeemunks 6 жыл бұрын

Sekolah Online Teknik Otomotif ahahaha. i agree is faster and cheaper. But the leaks is just driving me nuts! ive changed it 3 times now... genuine Honda o rings. 😂😂

@sekolahonlineteknikotomotif 6 жыл бұрын

+Munkee Munks Well, I understand, in that case you can add sealant to help the o-ring. Good luck 👍

@JK-fr3qp 6 жыл бұрын

Whats the clearance for raider j pro 110?

@mxnxxlcxbxg3543 5 жыл бұрын

What whill happen if the clearance is not right? What if you dont know the right clearance?

@sekolahonlineteknikotomotif 5 жыл бұрын

If you set the improper valve clearance, the valve mechanism will skittle away the rattle sounds (if the clearances were too wide), or the engine power will be reduced because of compression and combustion loss (if the clearances were too narrow).