No video
HOW TO ADJUST THE VALVES ON A HONDA RANCHER / FOREMAN ATV
Рет қаралды 22,743
Күн бұрынVALVE ADJUSTMENT PROCEDURE FOR A HONDA RANCHER ES 350 4X4, PRETTY MUCH THE SAME ON MANY OTHER HONDA ATVS..MORE VIDEOS ON THE WAY!
PLEASE CONSIDER BEING A PATREON-- patreon.com/Th...
OR IF YOU WANT TO HELP SUPPORT THIS CHANNEL AND FUTURE PROJECTS-------- ALBERICI.DARRELL@GMAIL.COM
@workingman9745 9 ай бұрын
Just came across your video. 999 thousand people could do this same job and make it EXTREMELY DIFFICULT. But YOU. Straight forward and SIMPLE. Thanks for the informative video.
@TheHomePros6221 9 ай бұрын
I appreciate that!
@Redhackle 3 жыл бұрын
This is the best video on doing this on youtube.
@TheHomePros6221 3 жыл бұрын
Aww man thank u that means alot
@damon323 3 жыл бұрын
Appreciate the level of detail man!! I just bought a 2017 Rancher with 200 miles. Never checked or adjusted valves in my life, but your video gives me confidence. So, you know you are top dead center when the intake and exhaust valves can “wiggle” like that? For the lack of a better word, sorry. Lol!!
@TheHomePros6221 3 жыл бұрын
THANK YOU SO MUCH MAN!! YOU CAN ALWAYS SHINE A FLASHLIGHT IN THE CYLINDER TO CHECK FOR TDC AND LOOK AT YOUR TIMING MARKS BUT YES BOTH ROCKERS SHOULD BE ''LOOSE'' THANKS FOR WATCHING!!
@hotrodkustomz9360 3 жыл бұрын
Love those Honda’s they are bulletproof
@TheHomePros6221 3 жыл бұрын
yes they are
@NilsKall 3 жыл бұрын
Good video, these bikes are so easy to work on! I used to have a Suzuki Kingquad and everything was hard to get to on that bike.
@TheHomePros6221 3 жыл бұрын
I use to have a king quad 300!! That was my first atv! I ragged that thing out and had some good times on it, when u put it in super low diff lock it would pull the gates of hell down hahah
@NilsKall 3 жыл бұрын
@@TheHomePros6221 you sure can! I wish I had one of those in good shape but with a 600cc engine or similar.
@TheHomePros6221 3 жыл бұрын
Yea that would be awesome I’ve been looking for a nice one
@ronniesmith3711 3 ай бұрын
Great video
@TheHomePros6221 3 ай бұрын
Glad you enjoyed it
@RS-dc7wy 2 жыл бұрын
Awesome machine! Wish my can am was as simple to work on.
@TheHomePros6221 2 жыл бұрын
yea they can be tough but got lots of power
@danharmon9237 8 ай бұрын
tdc on the COMPRESSION stroke.
@TheHomePros6221 6 ай бұрын
Yep
@TheHomePros6221 3 жыл бұрын
Probably not unless your valves are way out of adjustment
@Brandn43 2 жыл бұрын
Wow mine has 3000 miles and I’ve never heard that noise
@TheHomePros6221 2 жыл бұрын
it’s recommended in the manual at 250 miles to do the first valve adjustment which I’m doing here, after that u can go many miles without doing another. I have another rancher with 9,000 miles and I’ve only done two valve adjustments on it. these are great engines!
@jaseysmith1629 2 жыл бұрын
Amazing how many people I hear riding the hell out of these old Hondas and all you can hear is the valves tapping like crazy lol
@TheHomePros6221 2 жыл бұрын
I know rite!!
@daltonleffew1137 Жыл бұрын
How long of a job was this?
@TheHomePros6221 Жыл бұрын
about an hour
@daltonleffew1137 Жыл бұрын
Thanks I'm going to try this afternoon
@TheHomePros6221 Жыл бұрын
👍
@camarojay7027 3 жыл бұрын
Will this help when it won't start
@TheHomePros6221 3 жыл бұрын
maybe
@porkerporker22 3 жыл бұрын
Cant believe you took the plug out with the impact wrench and then put it in without starting it with your fingures first, and tightened the tappet cover bolts with it . And 006 mm ??? dont think so pal. .006 " .152 mm your teaching people bad habits there pal. not to mention the amount of threads you're knackering up.
@TheHomePros6221 3 жыл бұрын
I ment .006 inches watch my 300 vid I say inches and trust me I haven’t messed any threads up I’ve been working on atvs my whole life and never stripped a thread I’m very easy with a impact it sounds like it’s torquing them more on camera but I assure you it’s not, it’s all about throttle control with a impact and most of the time I only use a impact to get the bolts started and use a torque wrench after which I don’t put on camera to save time. Check out my videos on fixing the fourtrax 300 with engine problems
@NilsKall 3 жыл бұрын
Perhaps you have a better video of doing it?
@jaseysmith1629 2 жыл бұрын
I’m a motorcycle tech and I understand where he is coming from about the impact, remember you may have been doing this for a while but you are teaching people how to do this!!! Show them how to do it the best way with out error, impacts as you know in inexperienced hands can ruin threads very easy! Especially in aluminum!!!
@nollvancleave2005 4 жыл бұрын
If you ain’t riding can am, then you ain’t riding! See you at big creek, bring bailey.
@TheHomePros6221 4 жыл бұрын
I'll make sure I go.. I mean someone's gotta tow the canned ham home when it breaks hahaha jk man good to hear from ya
@hunuhh5110 3 жыл бұрын
My rancher will eat your can am alive 😂
@jaseysmith1629 2 жыл бұрын
If you want a hard working bike that will last forever with basic maintenance go Honda! If you want a high horse power mud slinging belt burn power house go with can-am
@thejodster3833 3 жыл бұрын
It’s still ticks , you must not know what your doin
@TheHomePros6221 3 жыл бұрын
Haha maybe it sounds like it in the video but it doesn't anymore
@2LateIWon 3 жыл бұрын
Great video
@TheHomePros6221 3 жыл бұрын
Thanks!
Rocky Mountain ATV MC
Рет қаралды 2 М.
Raymore Repair
Рет қаралды 4,1 М.