Same😆, I feel like if I disassemble it and even put it back correctly something will happen and it will perform differently.

Shawn how do I put it back together

Glad I could help you out! Pheas

Glad I could help you out! Pheas

I am really glad you found it so useful. Would love to see a pic of your paint job. Pheas

Pheas Airsoft are you on Instagram? I’ll send you a photo when it’s finished!

@@reapermedia1937 I am yes, just search for pheas.airsoft and you will find me! Cant wait to see it! Pheas

£30 just to look at it?? I always look and diagnose for free! Pheas

Gigga Gar how do I put it back together

@@twelvegage6894 Put the video on reverse

Yes it is! The value you get out of this things is AMAZING! Pheas

@@PheasAirsoft 100%

Glad you found it helpful!

That is exactly what I wanted people to think. Its not that hard to do a lot of this stuff yourself. Just take your time and its easy (ish) Glad it helped! Pheas

Hiya. That's terrible news. You could try and glue it but I can't see it holding very well or for very long. The best option would be to replace the receiver. It my be hard to get a matching one so you may need to replace both parts. Pheas

Hiya, thanks for the question. That bolt sometimes has a head on each side allowing you to put an allen / hex head bit in both sides so you have friction. But on some models of M4, like this one, they only put a head on one side. To sort this, you can just hold the other side with a pair of pliers or grips to give you the friction you need to unscrew it. I hope that helps! Pheas

Hellol, if you have a look at any of my new style / more recently disassembly videos I go into the gearbox and reassmbly too. Pheas

I dont know either

Hiya. I just disassembled the 518 last night which is very much like this internally. On the wire between the gearbox and battery connection there should be a heat shrinked area on the wiring. If you unpick it you should fine two spade connectors (probably heat shrinked as well) and they can be pulled apart . Hope that helps. Pheas

@@PheasAirsoft thank you so much this helped a lot.

Hiya, there is a pin holding the front sling loop in place. Knock that out and underneath is a screw undo the screw and it will come off. However the rid unit is attached partially to it. So it will need to be replaced with some form of front sight or folding front site or you could replace the ris with a free float unit. Hope that helps! Pheas

Hello, if both pins are fully pushed out then it should just slide apart, maybe some friction from the paintwork / plastics rubbing. but shouldnt be "stuck " together. No idea withwout seeing anything of it, sorry. Pheas

Hello! You should be able to pull on it lightly to release the upper to allow it to slide off. Although in some cases... depending on the gun, it might need a side pin removing from the bullet release to remove that so you can take off the upper. Pheas

Hiya, easiest thing would be to pick up a new one, alot of retailers if you contact them will have them just laying about that they could just send you, or techs local to you. Pheas

Hello! If it keeps blocking then the first thing to try is to clean the barrel (use the unjamming rod with some toilet paper wrapped on the end so its a tight fit in the barrel, push it down the barrel and see how clean the paper is, if its dirty, replace toilet paper and repeat until clean. If it still jams aft this, it could be the ammo is bad quality so try a different brand, it could be the hop rubber is damaged in which case you will need to change the rubber and if that still fails it could be that the air nozzle is damaged, but highly unusual for that to be causing blockages. Pheas

@@PheasAirsoft it's not blocking. It's only done it once, it's the mechanism that's jammed. I watched a video after this one showing that you have to take the motor out and use a hook to release the reverse lock bit. So I'll try that and see if it sorts it out. Cheers though👍👊💚💛❤

Hiya, generally.. I wouldn't put any lubricant into it at all, unless you are cleaning and re greasing the gearbox. The oil will lead to the hop not being effective until it has rubbed off on the bbs being fed through it. To maintain it, I would just use the included barrel cleaning rod and some toilet paper to clean the barrel regularly. That way you are clearing out any grime that accumulates after each game day and will at least keep it shooting. It should just "work" with as little maintenance as that. If you want more doing it to it then an occasional clean and re-grease in the gearbox is good, but I would always go with "if it isn't broke, don't fix it" approach. Hope that helps! Pheas

awesome, sounds good. i recently got into airsoft so i wasn’t sure of the ins and outs yet. thank you for replying!

Hello! Once you have the ris unit off, and the gas rod out of the way (silver rod connected to the front site, which probably needs to come off to get it out the way) You need to carefully use an adustable wrench to grip the teeth of the delta run and unscrew in normal lefty loosy righty tighty, if you have an armourers wrench to hand, the 3 pins at one end match to the delta "teeth" and allow it to be taken off. Hope that helps. Pheas

I use a set of bits, you need to use Torx or a hex bit that matches the size...I seem to think a Torx 10 (T10) was what this one needed. Pheas

Hello! Did you manage to sort it? it should just split easy, is / was the dust cover catching at all? Did it even split at all? Pheas

If you can, send me a pic to my Facebook page or instagram and Ill have a look.

Pheas Airsoft I messaged you thru instagram!!

Hiya. Generally any Airsoft crane stock will fit on these, some will be tighter and some will be looser fitting. But generally pick the style and they should all fit. Make sure it's an Airsoft one and not a milspec one as they are slightly different. Pheas

Pheas Airsoft nice thank you so much🙏🏾

The Taiwan gun one. That's the one for warranty purposes. If you remove it then you don't get warranty as you have "tampered with it" . Pheas

@@PheasAirsoft oh okay I thought you just forgot it there. Lol.

You could shorten the whole thing by putting s shorter front end on it, and if you wanted DMG type mags you can get a conversion mag well to be able to use Uzi style mags on it.

Or if you haven't seen have a look at the golden eagle assaulter m4 I unboxed which is basically an m4 SMG set up, but used m4 mags.

Thanks for the question. Great choice in getting this. I run mine on 7.4v lipos and it's much better for it than NiMH batteries. I use 0.23 or 0.25 gram BBS in mine for the bit better consistency when firing, more often than not it's 0.25g. enjoy using the 506 it's a beast of an aeg!

Thanks for the fast response mate, much appreciated.

@@jadsairsoft2351 more than welcome. The only upgrade I could suggest in the short term would be a new motor as the standard one isn't amazing. I've put a g&p m120 motor in mine and completely transformed it!

wow, watching videos on the m120 - the speed is insane. found it for around £30 online. My only worry is that it might strip the piston teeth?

@@jadsairsoft2351 I wouldn't worry to much. My son and I have put about 15000 rounds through the 506 with an m120 motor and it's still going strong!

Hello! On this one you can I think. You have to take the pin out of the front sling loop (if it's still there) and then there should be a screw to allow it to be removed. If no screw or pin holding it in place then it may be cast into the barrel (buy not likely) pheas

Hello! Its sort of a balancing act to be honest, you need to balance it on the end of the motor, whilst then trying to put the base plate back on top of it to secure it down. Its mostly just time and patience. Hope that helps. Pheas

@@PheasAirsoft awesome, thanks man!

Hiya, yes, identical disassembly to this. Pheas

Hello! Thanks for the question. Its not something I have fully covered in one video as yet. But I have been asked a couple of times about this so will sort a video out asap on how to work on a standard M4 upper disassembly. Thanks! Pheas

Hello! Hmm thats a tough one! Is it the moulding on top for the screwdriver to sit in thats stripped? If so, I would try and use a flat head (to match the width of the gap in the screw head) Or try a trox or something like that, and push down on the screw HARD whilst trying to unscrew in the hopes the bit will gain traction and unscrew it.... then replace once out. I hope that helps! Pheas

@@PheasAirsoft thank you sir! I will try the flathead screwdriver method. if not I bought "ez grip" product on amazon for stripped screws. Hopefully it works 🤞

Thanks for the question. Internally they will be pretty much identical other than the barrel length. So I'd pick the one that will match your main preference for playing (urban or woodland) I doubt there would be much I'm performance between them so possibly even just pick what you like the look of most. I'm a big fan of compact aegs so the cm.506 was a great choice for me and my son who will use it. Hope that helps

@@PheasAirsoft Alright, I'm new to Airsoft and i'm looking for a cheapish gun that I can start off with, So i think i'll go with the CM515. Thanks for the help.

@@joeporter5971 you are more than welcome. Internally they will be the same, and it's a great platform to build on and improve over time. I've done an unboxing and review of the 506 if you want to have a look through my vids on my channel. They are amazing value and excellent even straight out of the box. Enjoy using it and welcome to possibly the best hobby in the world!

Cyma 518 is so nice

Hiya. Does the trigger move at all? or is it that the trigger moves and nothing happens? Pheas

@@PheasAirsoft it moves maybe 1/4in but does nothing.

@@jaywagner13 That's very odd. That could be lots of things to be honest. The best thing I could think of would be to take the gearbox apart and then send me a pic of the internal (email, fb or insta) and we can take a look at whats going on. Not heard of this before, at least not without something else being broken and wedged in place to stop the trigger. Pheas

@@PheasAirsoft I sent it back to Amazon. It was just a bummer because my son was ecstatic over the gift and it broke in like 10min on Xmas morning. Im gonna take him to airsoft specially store and get him a good gun.

@@jaywagner13 cant argue with your decision. If it was still under warranty then you made the right call. He will love going to the store to choose one! Good luck with it all! Let me know what he picks. Pheas

Hiya. Of course I can. Will have to give me a day or two just finishing up a house move. But I will sort you one out! Pheas

Thanks very much, I was worried I was going to break it

You have also gained a new subscriber

@@dirtbiker1745 just to check. Are you wanting to replace the wiring to to go the front of the gun or just disconnect the wire so you can remove the stock and out the wire back out the back?

I just want to know how to disconnect the cable at the back because the cable doesn’t fit through the buffer tube and I need to put a new sling mount on as the cheap plastic one that was on it snapped.

Hello! Yes it is on this. Under the front sling loop (on the front sight) there is a Philips head screw remove that and it will come off. You will need to push a pin out holding the sling loop in. It will mean that the handguard has nothing holding it in place though. Pheas

Hello! I believe the "from factory" spring is an m120 so would have thought it would accept m130, but you probably want a better gearset in there to deal with it properly, and a better motor too. Pheas

Hiya, yes it is. There is a little grub screw in the flash hider and then it will unscrew like a normal flash hider and then screw on a surpressor

Hiya. Next time I have one to work on I will show how they come off of a traditional AR like this one. Pheas

@@PheasAirsoft thanks man! Would also love to see the mod you mention for the cyma 515 batter compartment, taking out the piece of plastic.

@@shayrickles-mcgreal7122 You are very welcome. I did a video about the mod for the stock. Here is a link to it kzfaq.info/get/bejne/m7Vpe8Z135ywpnk.html Pheas

If the rear pin, trigger pin are out of the receiver and the 2 screws are out of the pistol grip, then it should just lift up and out. Pheas

@@PheasAirsoft i completely forgot to take out the mag release 🤦‍♂️thanks for the video

@@skeeter7898 we have all been there! Bet you will never make that mistake again! Glad you got sorted! Pheas

Hiya, there are a few options. you could get a front wiring kit which has everything to just "drop in" and replace the trigger block with a front wired one. Or you could de solder the current wires and solder new wires in for front wiring. Or you could get a front wired mosfet like a titan and replace the trigger block. Hope that helps! Pheas

Hello! Sorry for the late reply. DId you have any luck with this?? One thing that has come to mind is sometimes the bolt release button (the one above the mag release on the thumbnail there) can stop them separating, so if you pull on it lightly (very lightly) then it may release it alternatively, it could have a bolt release that is connected to the other side, so will need to be removed. Pheas

www.taiwangun.com/assault-rifle-aeg/cm-506-cyma Thats where I got it from! Have fun! Pheas

I have not heard of the crosman Uzi. Is it battery powered? Might be worth pulling the motor out (if it can come out, whilst still wired in) and see if you can get the motor to move at all. Pheas

Hiya. You can yea, there are two Philips head screws on the under side of the barrel that releases it. If you take it off though the rail unit will not be held in place by anything and will slide off. Pheas

@@PheasAirsoft Thanks for the tip. Looks like I'll have to buy a new handguard haha

The heat shrinked wires? I use a VERY small flat head to stretch the material to allow the connectors to be pulled apart. Pheas

@@PheasAirsoft Thank you

As long as it is for a standard marui compatible one then yes. It won't accept gas blow back or ptw type ones. Pheas

@@PheasAirsoft thanks

As soon as I am home from work later I will take a look and get back to you!

Just checked for you, the front sling loop needs to be removed by pushing out a pin, then where it sits on the barrel (there are two bits) on this version there is a Philips head screw in each place. Undo those and it will come off. Hope that helps!

Hiya, in the opening of the video, you can see it sat in place just above the mag release, it's cold a bolt release. Hope that helps Pheas

@@PheasAirsoft thanks! I figured it out

Hello! The rear sight on this particular gun just needs the big wheel / nut on the left side loosening off, then it will come off. Hope that helps! Pheas

@@PheasAirsoft that’s the issue. The wheel on my gun is stuck, it doesn’t move when I try to twist it

@@kosha. I'm guessing you have tried a screw driver? IF not try that, as there is a vertical slot for a flst head, failing that some pliers to grip it and twist. Good luck with it. Pheas

Great choice! This is my son's starter and he started just plinking in the garden, now he plays with it on site with me! Great piece of kit.

@@PheasAirsoft for it's price you can't go wrong I'd like to change front hand guard though as you say a lil bit of play.

@@danny1ft1 it's not a very lot of play, but for the price... Superb piece of kit. My son used it again today and shot about 3000 rounds and it never missed a beat. Best 60 quid I've spent on anything for Airsoft ha ha ha!

@@PheasAirsoft yeah I'm just picky lol, but it does fire well, it seems amazingly consistent, the mag is a bit poor that comes with it, I've only successfully emptied it once in one go, usually you have to jiggle or re wind the mag.

Hiya! They are classed as toys, so certainly wont put anyone down, but it would hurt / sting enough, especially at close range (and non-lethal) that it potentially would give you an advantage to take control of a situation if someone did enter your home. They don't have the capacity to shoot anything too heavy (they are 6mm plastic balls after all) but in theory it could be used to at least cause someone enough discomfort that they are stopped from doing much / anything. Pheas

It can scare or sting people for a while, but if you want to injure him or her, a knife from your kitchen is better.

Hiya Mike. Can you send me a message again as I can't find. I'll reply to that see what we can sort out. Pheas

@@PheasAirsoft do you mean ill resend my comment

@@PheasAirsoft Hey pheas its me the guy that has alot of question Can ya pls answer me again im planning to make my own custom m4 aeg can you reply me the parts i need to have a working aeg i have an assembled v2 gearbox

@@MOana-zi4dm I got a but mixed up, I could have sworn you had sent me a message on social media somewhere. So if you have a gearbox then you will need: a motor, hop unit and barrel and hop rubber, outer barrel, handguard (your choice of all the different options), an upper and lower receiver, a stock assembly (could be a folding stock, normal stock tube and stock, just an end cap... There are loads of options) then some sort of iron sites and or scope and a muzzle break or surpressor. I think that covers everything. Hope that helps. Pheas

@@PheasAirsoft thankyou bruhh another question is e&c a good airsoft brand and what handguard has a cool looking design

Hello! I sometimes find I REALLY have to whack it hard to remove it, or its often helps if I remove all the other screws / pins and make that the last one and it often comes out much easier. Good luck with it! Pheas

I did end up getting it out, had to unleash the power of a thousand suns though lol,

@@LockheedC-130HerculesOfficial Glad you managed it! Really made me chuckle your comment!! Pheas

Hiya thanks for the suggestion. I will make sure I highlight this sort of thing in future videos. It was a 20amp instant blow fuse. But we removed it as part of the installation of the merf chip. Pheas

Hiya. What part didnt work for you? Feel free to drop me a message through insta or Facebook or email on pheasairsoftyt@gmail.com and we can sort it from there. Pheas

Pheas Airsoft taking it apart.