That ring does come off . Pheas

Glad I could help you out! Pheas

Hiya. The gearbox in this is a version 2 gearbox. Good luck! Pheas

Hello! It is not programmable unfortunately, the initial batches seemed to not like 11.1v lipos, but the new ones are happy to go with 11.1v now! Pheas

I think it was a T6 (Torx) head (maybe a little smaller) to remove it. Pheas

Hello! Glad you found it helpful! The standard cyma gear ratio is 16:1 to one I believe. Pheas

@@PheasAirsoft Wow thanks a lot for the fast reply :) Cyma really is improving which I love 💯 Edit: Tbh your breakdowns really are amazing, definitely subscribed 🤙🏼

Would be a dream come true ha Ha. Pheas

Hiya. It's ok at best, it serves a purpose and replaces the standard switch and makes it a little more efficient, with all the chips on it I can't help but think it should be programmable but doesn't seem to be any evidence of documentation, a Perun or a titan will be much much better option if you have the money to get one and offer a lot more features. Pheas

Hello! Check for the grub screw underneath first, if there is remove that, if not then remember is comes off counter to what a normal thread is. It could be that a touch of thread lock has been applied... So might need some grips and a bit of brute force, but don't forget it goes the opposite way to a normal thread... So lefty tight righty loosy! 😂 Pheas

@@PheasAirsoft Thank you for the info! I really wanted to attach a 200mm suppressor to hide a longer inner barrel I may install. Yes I removed the screw but it didn’t budge. I’ve also tried brute force. I’m really annoyed they fastened the flash hider so tightly on.

Hello! Is there a little grub screw under the muzzle break? Usually is one, just loosen it off then the muzzle will unscrew the opposite way to normal. Hope that helps! Pheas

Hello! It's listed as 300mm in the product description on Taiwan Gun. Hope that helps! Pheas

Hello! I think it does / will come off if you didnt want it to be there. I think it is supposed to be there in keeping with the accurate look. This is all assuming you mean the muzzle break? Pheas

@@PheasAirsoft I mean the step up part of the barrel where the muzzle brake/moderator sits flush.

@@freetobe3 Yep, it is what I thought it was, then it will come off. Pheas

Hiya. Yes indeed you can, it is just a normal airsoft buffer tube spec so will be a quick and easy change! Pheas

@@PheasAirsoft wow that was quick. Thanks a lot!

Hiya. The Taiwangun listing for it stats 300mm, which I think sounds spot on! hope that helps! Pheas

Hiya. That is a touch one. The mosfet is cool on the surface, but people seem to be reporting a 50:50 on if the mosfet lives forever or burns out. I have replaced two for people already myself. But they are excellent quality and would happily take another optical mosfet or a wired one (video on the one I did coming soon)... If it was my choice... I would go for this one. But The internals a a little better (other than the mosfet) and I prefer the overall look of this too, and the capacity of the mags is a little better as well. Hope that helps! Pheas

@@PheasAirsoft thanks because I love the look of this as I want to recreate Larry vickers ar or Robert deniro look in the movie heat. I wouldn’t be able to to change the mosfet if it brakes that could be an issue

@@MuscleFlexPro There are plenty of guides to help you if you are handy with tools to repair it, there are also plenty of airsoft techs about that could sort you out. If you are in the UK, I do tech work and could happily sort it out for you, if it broke. Pheas

@@PheasAirsoft I’m in Ireland unfortunately where can I find those guides online pls? Thanks my friend

@@MuscleFlexPro HEre is a link to my install of an after market mosfet: kzfaq.info/get/bejne/itmebLaS3sXQgX0.html in a cyma with the exact same mosfet. Pheas

I do not, sorry! It's only recently that I've started to measure the nozzles that are included. Pheas

@@PheasAirsoft Guess I'll find out when i open it, I got myself the shorter E1 model and so far i couldnt be more happy with it. In the meanwhile they had some sort of a revision. Delta ring is correct now, also the lower reciever with no stops around the mag release and they ditched the old m4 style hopup in favor of rotary hopup. Got myself proper slim handguard and couldnt be happier with the purchase.

Out of the box from the factory, they are about 400 to 420 fps. Pheas

Tip

@@alphakronos7297 Hiya. If you are in the US then I believe by law they have to, in the EU they can be fully realistic, so it came as you can see on the video to me. Pheas

Thank you

I haven't, but the openings are all there for it to be relatively easy for someone todo! Pheas

don't tempt me.... please don't tempt me. The cm.028 we had on the channel is currently going through a project (with videos) for something similar to this, with a high speed motor, 12:1 gearset and a mosfet to see what I can get out of it, and a comical paintjob. It will be the "AddidAK" project, that should just about hint enough at what it will look like! Maybe the RPD will be the next one ha ha ha Pheas

Pheas Airsoft can’t wait to see the finished addidAK when it is completed. Should get a drum mag if you can for the addidAK it’ll be funny I think

The hop units are a bit naff, considering they are now doing the tight bore and the mosfet, hopefully it wont be long until they do a better quality hop unit. That said its not to hard or expensive to drop an after market hop in it. The hop rubbers i find are pretty good. Pheas