How to Apply a Ceramic Coating to your Car!!! - VETERAN 9H

  Рет қаралды 1,785,330

Clean & Shine Car Care

Clean & Shine Car Care

6 жыл бұрын

Subscribe to our Channel: / @cleanandshinecarcare
Instagram: clean_and_s...
-Here are the link to the product presented in this video:
-ceramic coating veteran 9h: rover.ebay.com/rover/1/711-53...
How to Apply a Ceramic Coating to your Car!This video has the steps needed to prepare the car's paint and protect it with ceramic coat veteran 9H
#cardetailing #ceramiccoating #carprotection #detailing

Пікірлер: 347
@CleanandShineCarCare
@CleanandShineCarCare Жыл бұрын
❗For more information about the steps to prepare your car's paint and to protect with ceramic coating, CHECK OUT THIS VIDEO!!! 👉 kzfaq.info/get/bejne/bK9ol6qSx7_Gknk.html
@MrEye4get
@MrEye4get 4 жыл бұрын
No idea why people thumbs down this. Great demonstration!
@juansantos1614
@juansantos1614 2 жыл бұрын
Because maybe just maybe those are really really good
@enfield7123
@enfield7123 2 жыл бұрын
Just don my mokka again after 2 years still come out like new car brilliant product
@mlackey9812
@mlackey9812 5 жыл бұрын
In answer to Marv Woo frustration re: no 'explanation' of what is used and why: here you go I understand your frustration. I, as a tradesman completely understood/understand the products and the steps without the 'words' Let me give you some insight. 1st. wash your car, 2nd, use a 'clay bar' to scour the paint, 3rd. use a 'polishing compound' with a power polisher. It looks like he's using 2 separate grits of polishing compound or one, the first one, as a polisher and the second time as a 'sealer' ( a 'sealer' is a separate product to fill in 'Micro scratching' left by the polishing compound). Then and only 'then' does he apply the 9H-Mr. Fix auto ceramic coating. Read....a lot of prep before the actual application of the 'ceramic coating' And there you go....the 'tradesman translation' or at least what 'I' see.
@nikolamin3548
@nikolamin3548 4 жыл бұрын
Thank you!
@niknoks7638
@niknoks7638 3 жыл бұрын
Great translation 👍
@geoffwood6044
@geoffwood6044 Жыл бұрын
I would just add, IMO after claying I would wash again to remove any residue left by the lubricant, most wouldn't need to use a compound (1st pass) and just use a swirl remover (2nd pass, I would then use a "tack cloth" (decorators use these), this will remove all residues, very important to do this before ceramic coating and NEVER afterwards (as this will weaken the structure of the coating), then use sparingly, the ceramic coating, some need a little longer than others but as mentioned, watch for the rainbow haze (glancing sideways along the paint), then buff to a glass like finish. These ceramic coatings are pretty good if you're not an avid car "detailer" ie waxes etc I also use ceramic coatings on side windows NEVER windscreen, the wife uses it indoors on the shower screen, so it really is a versatile product for not only car but house as well, use it on your house windows and you'll not get those nasty waterspots for a long time.
@omidkhajeh2931
@omidkhajeh2931 Жыл бұрын
Most useful video I’ve seen very good thank you master
@ronj5714
@ronj5714 Жыл бұрын
Very relaxing to watch, but did speed it up to 2. Most enjoyable.
@reno775nv86regal
@reno775nv86regal 4 жыл бұрын
I missed the whole video. I just heard the music bumping and immediately started dancing. This is the third time I’m attempting to watch this video
@mynsxt6
@mynsxt6 3 жыл бұрын
Please focus
@AbdulHameed-dp3hq
@AbdulHameed-dp3hq Жыл бұрын
very nice . detailed method for ceramic coating. Really appreciable
@bigboybmx69
@bigboybmx69 5 жыл бұрын
Ive used it on my wheels. It’s not a bad product at all for the price. A lot better than wax like 3/4 of the comments are saying.
@marcosantoniogoncalves7718
@marcosantoniogoncalves7718 2 ай бұрын
Bela demostração.... Profissional excelente...tpo
@vladatomei4650
@vladatomei4650 5 жыл бұрын
Hello ! could you tell me what kind of products did you use throughout the process? including the used polishing machine and sponges? I would be grateful
@King_drew
@King_drew Жыл бұрын
1: clay bar (the blue thing) 2. Microfiber towel 3. DCutting/ Polishing compound 4. Ceramic coating kit
@elihucasillas7538
@elihucasillas7538 Жыл бұрын
Was there a polish in between?
@raffoasus4086
@raffoasus4086 5 жыл бұрын
Dopo quanto tempo hai passato il panno per rimuovere il coating?
@stefanmodigh7897
@stefanmodigh7897 5 жыл бұрын
Is it possible to apply on a cellphone made out off glass for like extra protection?😊
@kishore2460
@kishore2460 3 жыл бұрын
Please can you tell me what were the other two applicants name before you used the ceramic coating
@TheCreationman
@TheCreationman 5 жыл бұрын
You’ve just convinced me 😱 guess I’ll be ordering some soon!
@skysvloggaming539
@skysvloggaming539 Жыл бұрын
Hi how long did u wait for the coating to take effect?
@raffymagaling2516
@raffymagaling2516 4 жыл бұрын
hi! can you tell me the stuff you put using the da buffer and what brand is thos coating
@illusionzauto
@illusionzauto 5 жыл бұрын
I don't mean to bust your balls buddy but was the surface wiped with a prep spray after polishing or was the polish like a primer polish that has Sio2 allowing you to go right to the ceramic coating? Only asking because ceramic coating will fail if there is any polishing oils left behind and missing that key point will have a lot of people wondering why the coating didn't last.
@gc9n
@gc9n 5 жыл бұрын
Εισαι ευχαριστημένος με τα Etalon? σε σχέση με τα meguiar είναι παρομοιο-καλυτερο?
@momentumtintdetail
@momentumtintdetail 6 жыл бұрын
I have the red “hyjet” brand polisher. 21mm looks very similar. Nice video!
@Fightfitzw
@Fightfitzw 5 жыл бұрын
Hi, what machine are you using?
@dhaneshkumar7557
@dhaneshkumar7557 5 жыл бұрын
Does buffing affect thickness of color?
@muneebaraees3032
@muneebaraees3032 4 жыл бұрын
Can this glass coating be washed away with soap? Because I would wanna think for getting my car washed
@edgar8016
@edgar8016 5 жыл бұрын
Hola. ¿Después de aplicar el cerámico recomiendas aplicar cera?
@michaelrivera1966
@michaelrivera1966 5 жыл бұрын
NO, vienen otros productos para usar como la silica o hidrosilex despues de haber usado la ceramica para mantener vivas las propiedades de la ceramica es un mantenimiento requerido por todos los manufactureros de ceramica.
@yannickmarsolais8982
@yannickmarsolais8982 4 жыл бұрын
Are you using the same applicator for the entire car?
@bwilliam4023
@bwilliam4023 4 жыл бұрын
You have to wipe off what's left after polish, the ceramic coating only bound to clear coat. If you don't this probably only last for a year
@fabridee
@fabridee 2 жыл бұрын
ilike what you did, some people talk so much bullshit...iwas in the car industry for over 20 years and iknow when people talk too much shit. and you did just a great job 👏 👍
@redroris4906
@redroris4906 4 жыл бұрын
how to remove the white line around the box coating on that car ?
@AAldr
@AAldr 3 жыл бұрын
Very professional vedio 👍
@vaporionesteticaautomotiva5722
@vaporionesteticaautomotiva5722 5 жыл бұрын
how long will during this coating?
@joegolfer9372
@joegolfer9372 2 жыл бұрын
Is the little blue bottle the actual ceramic?
@rodelflores7443
@rodelflores7443 5 жыл бұрын
How many days of work for a ceramic coating
@pootershnitzel
@pootershnitzel 3 жыл бұрын
Same applies to painted wheels?
@muhammadfaridhakimi3728
@muhammadfaridhakimi3728 Жыл бұрын
First two and three what step ? Three ceramic coating right ?
@jordanp6420
@jordanp6420 5 жыл бұрын
Awesome video man
@TomLee-wz3ke
@TomLee-wz3ke 5 жыл бұрын
Why did you miss the bottom left while buffing? OCD triggered....
@user-sc8xv4lh9d
@user-sc8xv4lh9d 3 ай бұрын
😅
@user-sc8xv4lh9d
@user-sc8xv4lh9d 3 ай бұрын
😅
@ferreiraolive
@ferreiraolive 5 жыл бұрын
good night. Congratulations on the video, can you tell me what products you used in the video?
@mariofigueroa9851
@mariofigueroa9851 Жыл бұрын
how many bottles of the product do we need for a whole car?
@loveritobeatsmusic1131
@loveritobeatsmusic1131 4 жыл бұрын
excelente video 😷👍🇵🇪🇵🇪
@ilmarsdzenisflorida
@ilmarsdzenisflorida Жыл бұрын
Nice, thanks.
@zy4498
@zy4498 2 жыл бұрын
Can apply on windshield?
@gioviardesigngraphic8403
@gioviardesigngraphic8403 2 жыл бұрын
what kind of products did you use ?
@MrHalomaster8
@MrHalomaster8 5 жыл бұрын
Wash and clay can I Used Ardex micro 1 compound and Ardex wax apply 9H to it would that be okay.
@joemama2907
@joemama2907 5 жыл бұрын
Avoid waxing before ceramic coating you’ll get high spots. This guy in the video isn’t a professional
@redbaron1954100
@redbaron1954100 4 жыл бұрын
Once ceramic coat applied how long or what indication did u used to wipe off and how long after applied and wiped would u wait to apply another coat
@mankoesamuel1736
@mankoesamuel1736 3 жыл бұрын
Approximately 3 months.
@bluesparky727
@bluesparky727 5 жыл бұрын
Not my video but I will say ceramic coating will last about two years and properly protect your paint wax is simply a coverup for crap paint. When you use a product like this you need to make sure the paint finish is corrected. This means buffing and polishing the entire car then the car needs to be cleaned by hand w a wax and grease removing cleaner. Once the paint has been cleaned and polished then you can add this coating. This coating adds a layer on top of the clear coat where as wax fills in the existing scratches temporarily. Once paint is corrected apply the coating in a crisscross patteren evenly on the whole panel you can most the panel with water lightly to help spread the coating. Let this set up for about ten minutes longer if it’s cold and then lightly buff the panel with a microfiber if you doing an entire car simply start on one panel and work around the car until you come back to the original panel then use your microfiber. It is critical that the car is cleaned and washed between each step leading up the the wipe down with wax and grease cleaner
@herbertmartinez7639
@herbertmartinez7639 2 жыл бұрын
How bout an orbiter is it affective too?
@garland3438
@garland3438 5 жыл бұрын
Is also right to apply on glass and mirror s to keep water out?
@simonghantous8034
@simonghantous8034 5 жыл бұрын
No u cant. There's ceramic coating for windows. The name of the product ceramic Rain.
@jonwear9791
@jonwear9791 10 ай бұрын
Wow, a big difference.
@heymanbatman
@heymanbatman 2 жыл бұрын
Is this safe on side mirrors?
@emrecelebi1271
@emrecelebi1271 5 жыл бұрын
Harika bir video olmuş HARİKA wonderfull great work good jop good jop :D Thank you for video
@endofword2012
@endofword2012 5 жыл бұрын
Some one can tel me if i Can you put Veteran 9H on plastic front light?
@yonayhernandez912
@yonayhernandez912 3 жыл бұрын
Hey where are you located??? Im intrested in having this done my car..
@marioskosmidhs9454
@marioskosmidhs9454 5 жыл бұрын
Dear sir i have the same bulle polisher. I am not proffesional, please what is your opinion and expirience with this machine?? Thanks
@noufalcm8781
@noufalcm8781 5 жыл бұрын
Hello how much mechine rate?
@andriwcuervo9023
@andriwcuervo9023 3 жыл бұрын
Buenas tardes , deseo más información sobre este producto , tienen algún contacto en Medellín Colombia, gracias
@gueriog.9745
@gueriog.9745 Жыл бұрын
What are the revolutions on that machine?
@VijjisBeautyBook777
@VijjisBeautyBook777 3 жыл бұрын
What the chemicals you using in machine
@bengong105
@bengong105 2 жыл бұрын
Hi I am car spray worker in Penang, wax coating or water coating better¿
@Beto_proanimals
@Beto_proanimals 3 жыл бұрын
hello, how many seconds do you have to wait to remove the ceramic?
@shaikhirfangaming6902
@shaikhirfangaming6902 Жыл бұрын
2 min
@caseykittel
@caseykittel Жыл бұрын
Did you end up with a permanent imprint of a square on the hood? Off center? Seems like a risky demo.
@ptheledge5390
@ptheledge5390 4 жыл бұрын
Where’s the IPA wipe down to make sure any remaining polishes are gone?
@ziman8309
@ziman8309 5 жыл бұрын
how long did u wait until u wiped the excess coating?
@DJSEXYNONSTOP
@DJSEXYNONSTOP 5 жыл бұрын
Wait until it oils up, basically you can see it forming tiny drops :) and would not wait more than 2 min
@eddietabartalibong1040
@eddietabartalibong1040 2 жыл бұрын
Helo po sir ano po Ang clasing chimicals pwede gamitin sa ceramic coat yong pag paint coreccetion kailangan ba mag step 1 Hanggang step 3 sample hard compound polish paint protect last ceramic coat pls reply me dogang kaalaman po Isa po Ako deteler ompisa palang mag comic coat
@sezziek1
@sezziek1 5 жыл бұрын
Hello, a complete noob here. I want to do the same for my car. I understood the end bit with the Mr Fix, but please would you explain the stuff you did before that and what products and equipment you used. . Sorry, I’m learning from scratch and don’t know much about this stuff. Many thanks :-)
@MagicTheKrakening
@MagicTheKrakening 5 жыл бұрын
Mr fix is trash bro
@andrefrank6659
@andrefrank6659 5 жыл бұрын
Mr fix isnt trash people just knock it cause if the price point it works good it's all about the prep on the end. I been detailing since I was 8 and I'm 30 I use cermaic pro I'm certified by ceramic pro and glass parency and will be by g technique when I finish my training but Mr fix is a good DIY product you can get a good year maybe two out of the coating if you properly maintain it.Get you a sio2 infused soap wash only with that and after you was get you ceramic booster if you search it you will see it they are even selling ceramic sprays at auto zone on store shelves now. Just make sure you wash with sio2 and spray the booster after at least every 3months unless u get a good booster than u can make 5 or 6 month
@rajkumar_bfa3761
@rajkumar_bfa3761 5 жыл бұрын
Amazing
@mrnoob0219
@mrnoob0219 2 жыл бұрын
It’s easy to install in home??
@-ANguyenthikieutrang
@-ANguyenthikieutrang 5 жыл бұрын
Can I buy it back to my country?
@sarathsamuel201
@sarathsamuel201 4 жыл бұрын
In chennai how much cost for R15 v3
@hosmanygaitan5393
@hosmanygaitan5393 2 жыл бұрын
Hi do I have to buff the car before ceramic coating even if the car is almost new pain
@brycechow9178
@brycechow9178 Жыл бұрын
No unless there is any swirls or scratches then I would not polish. Just a clay bar and wax remover or 50/50 water and alcohol spray.
@manojkumar-sj2rd
@manojkumar-sj2rd 2 жыл бұрын
Good video
@eriksestak6872
@eriksestak6872 2 жыл бұрын
Can i apply it outside?
@karaju6961
@karaju6961 4 жыл бұрын
How to remove whater sports on car glasses
@mshnamteeskol9861
@mshnamteeskol9861 5 жыл бұрын
Before coating, can we using all type of wax?
@Abdullah..S
@Abdullah..S 5 жыл бұрын
No off course
@LGarbac
@LGarbac 5 жыл бұрын
you missed one of most important steps, ipa/ panel wipe cleanse before coating
@830983208
@830983208 5 жыл бұрын
was thinking the same exact thing
@mtnmann72
@mtnmann72 5 жыл бұрын
Complete fail
@x-manroman2595
@x-manroman2595 5 жыл бұрын
Agree he don't know what he's doing
@markgutsche5067
@markgutsche5067 5 жыл бұрын
Good eye...
@sergeribeiro8704
@sergeribeiro8704 5 жыл бұрын
What is this step please ? Will it be the same work on a brand new car ?
@gsthMD7099
@gsthMD7099 4 жыл бұрын
Superb
@jeromeoxida8076
@jeromeoxida8076 4 жыл бұрын
What is the 1st 2 before the ceramic?
@mankoesamuel1736
@mankoesamuel1736 3 жыл бұрын
I think it's machine compound and machine polish or maybe even machine glaze...
@rhbb228
@rhbb228 5 жыл бұрын
Most of the videos i watch uses a degreaser before applying the ceramic coat since polishing compound contains natural oil in them. So... can you do without the degreaser?
@1990paulieboy
@1990paulieboy 5 жыл бұрын
pol pol personality I always use an alcohol + water mixture! Basically, a ceramic coating is pretty much a layer of glass on top of you car for possibly upto 3 years there is no real “maintenance” after you apply it a good rinse is enough to clean your car after it has been coated, there is no polishing or waxing the ceramic coating that’s why a lot of people like it me person don’t use it on my own car because I love claying, , cutting, polishing, waxing etc... but this is why you do it before hand (just clay bar, cut, polish) no need for wax as the alcohol mixture with just remove it anyway... but basically if you have a hologram or water mark on your car or some kind of imperfection on you paint and then do your ceramic coating you’ll seal it all under the coating, the alcohol mixture removes holograms and stuff so you don’t need to worry about it after the coating goes on. Once it’s on its on!! It’ll take come very aggressive cutting to remove it and in some cases, sanding!!
@rhbb228
@rhbb228 5 жыл бұрын
@@1990paulieboy Thank you very much for your help!!!
@elcomandante5160
@elcomandante5160 5 жыл бұрын
To make it even better claybar the vehicle after washing then rewash the vehicle, and proceed with these steps👍
@tvanb8729
@tvanb8729 4 жыл бұрын
I achieve exactly the same effect without the powertools :)
@gogomagog3584
@gogomagog3584 3 жыл бұрын
How??
@mgshizzle2213
@mgshizzle2213 2 жыл бұрын
No u don't this guy obviously never detailed anything it would literally take u days what a machine can do in a few hrs
@RajeshKvRajesh-md8sc
@RajeshKvRajesh-md8sc 2 жыл бұрын
Super
@mdetailing1336
@mdetailing1336 5 жыл бұрын
No ipa ???
@NasirHussain-wt2si
@NasirHussain-wt2si 3 жыл бұрын
Very nice explained 👍
@vinayakgawade8057
@vinayakgawade8057 4 жыл бұрын
Nice video...
@hiazn69
@hiazn69 5 жыл бұрын
What's the difference between the 2 compounds you used on the buffer?
@richardjohnston1818
@richardjohnston1818 5 жыл бұрын
Different levels of cutting
@dcarrstar7719
@dcarrstar7719 5 жыл бұрын
The first pad was more aggressive with a compound to remove defects while smoothing/ leveling the paint. Buffer trails and a haze is left after this step. The second pad is a less aggressive polishing pad with a polish to remove the buffer trails a bring the paint to a high gloss shine. Usually a ipa or wax and grease remover is used to remove all oils from correction before adding a coating, sealant, or wax so that they will adhere better. But he skipped that step in the video.
@vkarunakaran267
@vkarunakaran267 5 жыл бұрын
Fantastic demo, you would have mentioned the materials steps
@royaltimepass06
@royaltimepass06 2 жыл бұрын
Super 👍
@antonisrousias2790
@antonisrousias2790 3 жыл бұрын
How much bottles do you use for a small hatchback?
@kevinwilson6270
@kevinwilson6270 2 жыл бұрын
1 bottle
@kamiladam716
@kamiladam716 4 жыл бұрын
Without IPA?
@TheCowgirlNiamh
@TheCowgirlNiamh 6 жыл бұрын
I was hoping to coat my cars this summer but we're still on a water ban here 😩 I'm getting very cranky 😂
@1188clean
@1188clean 5 жыл бұрын
do what you want. land of the free
@MrCoalcracker79
@MrCoalcracker79 5 жыл бұрын
I've never experienced a water ban. Sounds shitty.
@dipenchandarana4915
@dipenchandarana4915 5 жыл бұрын
Very nice
@rajeevmaharaj47
@rajeevmaharaj47 4 жыл бұрын
Can u apply the ceramic coating after just washing ?
@Vanlifecrisis
@Vanlifecrisis 3 жыл бұрын
If you want it to look bad for the next 2 years. Unless its a brand new car from the factory.
@davidalcaino7
@davidalcaino7 Жыл бұрын
WOW!!!!!
@prstravelstips8523
@prstravelstips8523 4 жыл бұрын
How much price this chemical
@FullTechBeat
@FullTechBeat 4 жыл бұрын
Hi, i'm getting some parts painted bij a professional, after that i want to apply the ceramic coating, do i have to polish the newly painted parts?
@lukoitautodetailingllc3124
@lukoitautodetailingllc3124 4 жыл бұрын
The new paint requires time to 'breathe' the vapors out. You do not want to ceramic coat it immediately. It would be wise to do a light polish on the painted parts, IPA wipe down and then apply a ceramic coating.
@Yunggeck
@Yunggeck 3 жыл бұрын
what song is this ?
@audilujos3952
@audilujos3952 4 жыл бұрын
buenas tardes amigo. te puedo hacer una consulta?
@junsamaniego9695
@junsamaniego9695 2 жыл бұрын
Ke nombre todos ke produkto amigo gracias
@louie8368
@louie8368 2 жыл бұрын
Is it okay to put a PPF on top of ceramic coating?
@sundeepbhawsar
@sundeepbhawsar 2 жыл бұрын
yes you can
@prasanthmp3299
@prasanthmp3299 3 жыл бұрын
Nice
@GKshikho
@GKshikho 3 жыл бұрын
How long does it last? Ciramic coating
@josse6907
@josse6907 Жыл бұрын
5 years
@kevinkoppes1068
@kevinkoppes1068 5 жыл бұрын
Have fun getting tape residue off!
@0zakaMarek0
@0zakaMarek0 4 жыл бұрын
It's not a glue residue. It is a polishing compound that managed to get under the tape. It would have disappeared if he wiped the surface after de-taping.
Nano Age Ceramic VS Mr Fix 9H - Which is Better?
21:14
JoeMartinMVC
Рет қаралды 45 М.
Alat Seru Penolong untuk Mimpi Indah Bayi!
00:31
Let's GLOW! Indonesian
Рет қаралды 14 МЛН
Мы никогда не были так напуганы!
00:15
Аришнев
Рет қаралды 5 МЛН
How to Ceramic Coat Your Car Yourself - Step by Step Guide for Beginners
19:58
Are Amazon Ceramic Coatings Any Good? Tested & Reviewed! Mr.Fix | Hktianmei | GSLS
27:24
Best Ceramic Coating? $8 vs $120? Let’s Find Out!
17:01
Project Farm
Рет қаралды 867 М.
TURBO Snail Race | Car edition
1:00
Delikwenth
Рет қаралды 3,9 МЛН
Ты что-то понял?  #automobile #shorts #ваз
1:00
Мышка Мэвис
Рет қаралды 2,2 МЛН