No video

How to apply wrinkle finish paint VHT Wrinkle Plus FAQ Instructions valve covers header tanks

  Рет қаралды 44,787

tweedbean

tweedbean

Күн бұрын

A simple guide on how to refresh worn looking items using wrinkle paint

Пікірлер: 53
@sethtaylor5938
@sethtaylor5938 2 жыл бұрын
I use a zinc chromate yellow or green primer on aluminum. I’ve had some paint adhesion fails without primer. Electrostatic painting in the factory overcomes the adhesion issue. However, at home painting in my opinion needs primer on any bare metal, even sprays that claim you don’t need primer. Also I’d use a mild lye caustic soda bath on aluminum before any painting in addition to degreaser. And of course wash off any prep solution. Wear nitrile gloves and wear safety glasses.
@tweedbean
@tweedbean 2 жыл бұрын
Thanks great tips
@sethtaylor5938
@sethtaylor5938 2 жыл бұрын
If use water a weak Draino solution for cleaning aluminum with distilled water. They sell it in the grocery store (about a dollar for one gallon). About 1/2 teaspoon of Draino in a 1/2 gallon is enough. I'd let the lye solution work for about a minute. Use distilled water to wash off any residue. Use nitrile or kitchen latex gloves and safety glasses.
@noobmcgoob9745
@noobmcgoob9745 4 жыл бұрын
Brilliant video! I tried and failed to get a decent wrinkled finish until I used your technique!
@tweedbean
@tweedbean 3 жыл бұрын
Thanks for watching
@kdash3215
@kdash3215 4 жыл бұрын
Thanks, I got an excellent finish with your technique. Cool thing is you can spot treat if you missed an area or if it's not built up enough. It's hard to mess this up.
@tweedbean
@tweedbean 4 жыл бұрын
Great tip!
@ForestWoodworks
@ForestWoodworks Жыл бұрын
This was totally awesome 💯. Thanks for the concise tutorial. I may have the confidence to try this on my Walker-Turner Driver Line ac motor restoration end bells tonight 🔥
@tweedbean
@tweedbean Жыл бұрын
Good luck, thanks for watching
@adamearle583
@adamearle583 3 жыл бұрын
“Wipe it down with grease remover to get rid of any oils or grease” as he grabs it with bare hands. 90% of the time it’s fine but put a set of gloves on to save the headache the other 10%
@tweedbean
@tweedbean 3 жыл бұрын
Great tip, one for the future for sure
@markhammari5832
@markhammari5832 Жыл бұрын
If you suspend your part on a wire you can spray the bottom as well at the same time.
@tweedbean
@tweedbean Жыл бұрын
great tip
@user-pwfus
@user-pwfus 3 жыл бұрын
If you want the best wrinkle affect use an oven set it at 170f and be amazed
@tweedbean
@tweedbean 3 жыл бұрын
Great tip thanks
@sethtaylor5938
@sethtaylor5938 2 жыл бұрын
I do 180 because that’s lowest setting on my GE oven. I do 15 minutes bake in convection mode that gets even heat. Beautiful hard finish!
@bradypellarin8573
@bradypellarin8573 4 жыл бұрын
Nice video, good clear directions for use.
@tweedbean
@tweedbean 4 жыл бұрын
Thanks for watching
@mJlReplicanT001
@mJlReplicanT001 5 жыл бұрын
Hi ya .. does that tank work on the Manuel R56 coopers, I have seen some that won’t work due to the bottom coolant line is too far forward and fowls on the gearbox linkages .. Awesome videos , following you. Been heaps of help . Thanks again
@tweedbean
@tweedbean 5 жыл бұрын
Myki Jay thanks I here if your not careful with the lower pipe it fowls however apparently with careful placement of the lower pipe it’s fine. Will do a fitting video
@mJlReplicanT001
@mJlReplicanT001 5 жыл бұрын
tweedbean champion ! Interesting to see, definitely need a change from the old standard plastic bottle it has! Doing solid work, cheers again
@Cgtlfa
@Cgtlfa 3 жыл бұрын
Always wondered is it best to remove the masking tape before it dries? Thanks for the video btw
@tweedbean
@tweedbean 3 жыл бұрын
I’m not expert but I would probably say yes to avoid peeling the paint but that’s just my opinion
@rhbb228
@rhbb228 2 жыл бұрын
Can i use it over something thats has primer on? Or can i also spray it on something thats painted?
@tweedbean
@tweedbean 2 жыл бұрын
Best refer to manufacturers guidance on those questions. Thanks for watching
@matt7sixty
@matt7sixty 26 күн бұрын
In direct sun light only or Can this technique be done in garage and then heat gun? Thx
@tweedbean
@tweedbean 26 күн бұрын
Garage and heat gun 👍🏼
@matt7sixty
@matt7sixty 26 күн бұрын
@@tweedbean Thx! Trying now
@jeffruebens8355
@jeffruebens8355 4 жыл бұрын
It is better to wear gloves- skin has a lot of oils that cause fingerprints. I used the wrinkle black in 1978, after a friend hit the plastic gill-shaped front grill for my 1972 Plymouth Barracuda to help hide the crack after I glued it back together. I have seen people use an outdoor gas grill to cure paint. The wife will probably be upset if you use her oven.
@tweedbean
@tweedbean 4 жыл бұрын
Great tip
@Chicitypo
@Chicitypo 2 жыл бұрын
Just stumbled across this video. Great detail in your video. How has this held up? Is it scratch resistant when dry?
@tweedbean
@tweedbean 2 жыл бұрын
Hi thanks for watching, still like new. Its pretty hard wearing, I wouldnt say scratch resistant but seems stronger than matt paint for example
@TrashTakeCallouts
@TrashTakeCallouts 2 жыл бұрын
How long did you wait after your final coat before using the heat gun?
@tweedbean
@tweedbean 2 жыл бұрын
No more than 5 mins
@joseribera6800
@joseribera6800 2 жыл бұрын
You think I can paint my steel braided hoses with this. They are chrome now and would like them black
@tweedbean
@tweedbean 2 жыл бұрын
Assume your hoses are flexible so this wouldn’t work. Maybe some sort of rubber paint is what you need
@joseribera6800
@joseribera6800 2 жыл бұрын
@@tweedbean ok thanks
@jcgonza2664
@jcgonza2664 2 жыл бұрын
Good tutorial ❤️👌
@tweedbean
@tweedbean 2 жыл бұрын
Thank you
@dha588
@dha588 4 жыл бұрын
Do you need to apply clear coat?
@tweedbean
@tweedbean 4 жыл бұрын
Hi thanks for watching. This product doesn’t require clear coat
@vgabrieloklr1374
@vgabrieloklr1374 4 жыл бұрын
Hi man! Can i paint the bumpers of my truck with that vht paint?
@tweedbean
@tweedbean 4 жыл бұрын
Thanks for the question, are they plastic or metal?
@vgabrieloklr1374
@vgabrieloklr1374 4 жыл бұрын
@@tweedbean metal!
@nilesminor7403
@nilesminor7403 2 жыл бұрын
Whats your thoughts on doing this to the gas tank?
@tweedbean
@tweedbean 2 жыл бұрын
Can't see why it wouldn't work
@estuardo1631
@estuardo1631 4 жыл бұрын
Thank U
@tweedbean
@tweedbean 4 жыл бұрын
You're welcome 😊
@Jeepdriver75
@Jeepdriver75 Жыл бұрын
Durability good?
@tweedbean
@tweedbean Жыл бұрын
Seems to be yes 👍🏼
@richardstephenson1266
@richardstephenson1266 2 жыл бұрын
I have to say I bought this product for my harley engine on the strength of your video. And now I have to strip the while lot off and start again. Probably something I did bit I found it total rubbish.
@tweedbean
@tweedbean 2 жыл бұрын
Sorry to hear that. I’ve done a few pieces now with it and had no issues.
@austinlane5533
@austinlane5533 Жыл бұрын
@A. Melbs Probably something in the preparation department. I've used it on 2 HD engines. One with great success after a thorough cleaning and I got cocky a second time and blasted it on with poor results.
VHT Wrinkle Paint - Painting Your Valve Cover (How To)
14:38
Napp Motorsports
Рет қаралды 12 М.
How to wrinkle paint your valve cover!
12:37
Tommy La
Рет қаралды 586 М.
Little brothers couldn't stay calm when they noticed a bin lorry #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 17 МЛН
Каха заблудился в горах
00:57
К-Media
Рет қаралды 11 МЛН
Top 5 Spray Paint Effects - super easy tricks #spraypaint
10:20
Commando Designs
Рет қаралды 2,2 МЛН
How to spray paint wrinkle red & make it look good! (Without powder coating)
10:01
Moore Motorsports Garage
Рет қаралды 30 М.
Easy Rust Repair and Lacquer Peel Fix for Your Car.
16:16
CarFixEasy
Рет қаралды 769 М.
Restoring S2000 Valve Cover with Wrinkle Paint
17:03
CRXseth
Рет қаралды 39 М.
How to paint a valve cover (Wrinkle Black)
7:18
MrTarkan360
Рет қаралды 12 М.
RB26 GREY VHT WRINKLE PAINT PT2
7:38
Six Eleven
Рет қаралды 7 М.
The Perfect Pressure for the Perfect Paint Job!
29:26
Paint Society
Рет қаралды 197 М.
DIY Paint Job With Rattle Cans
24:03
Ratchets And Wrenches
Рет қаралды 1,2 МЛН
Little brothers couldn't stay calm when they noticed a bin lorry #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 17 МЛН