How to Assemble a Massey Ferguson 135 Multipower Gear Box

Рет қаралды 62,226

4 жыл бұрын

I have got to where I could assemble the MF135 Multipower gearbox. I run through the way I do it and hopefully it will encourage you to have a go at yours.
Hello I'm Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Пікірлер: 41

@tomscott4723 4 жыл бұрын

Great vid! I can't believe you didn't mash at least one finger doing this, a true professional! Thanks

@BundyBearsShed 4 жыл бұрын

And I didnt drop anything on my toes, Winning!

@zigzagstreaks793 4 жыл бұрын

Well done!! I've been waiting all year for this video, so thanks for the great Christmas gift , Lance. Regards, R

@BundyBearsShed 4 жыл бұрын

Glad you enjoyed it, It was a bit long winded in coming but hopefully it will help you out.

@winterhorse290 4 жыл бұрын

hope I never have to go into my gear box. but with this video. I think I could do it, THANK YOU

@BundyBearsShed 4 жыл бұрын

Thanks, Im glad you enjoyed it.

@j.c.7511 3 жыл бұрын

JUST WOULD LIKE TO SAY THANKSSSSSS SO VERY MUCH , THE LIGHTING IS ALWAYS JUST SPOT ON PS WORKING ON MY 135 MULTIPOWER

@BundyBearsShed 3 жыл бұрын

Glad to help

@charleshart6992 4 жыл бұрын

Another excellent video - you certainly make very informative and interesting videos that are great to watch! Hope you enjoy Christmas and New Year!

@BundyBearsShed 4 жыл бұрын

Thanks Charles, Merry Christmas to you and yours as well.

@UzunyaylaRencberi 2 жыл бұрын

Thank you for all these amazing videos!

@BundyBearsShed 2 жыл бұрын

Thanks for watching.

@workingrelics6121 4 жыл бұрын

Great stuff, it's nice to have reassurance that I did the job correctly the other week. Only thing I stuffed up was installing the mainshaft and epicyclic unit first thinking I could fit the multipower parts in last. I won't make that mistake again! Cheers.

@BundyBearsShed 4 жыл бұрын

It is not too hard really, but I must admit I did a bit of fiddling with this one too forgetting the correct order to do things.

@joshuablack398 4 жыл бұрын

you're a magician

@BundyBearsShed 4 жыл бұрын

If only it was true, lol.

@mfdriver4878 3 жыл бұрын

Really good video. I had a little bit problems with a bearing but you helps me! Sorry for the bad english:) greatings from switzerland! I hope my 575 runs soon.

@BundyBearsShed 3 жыл бұрын

Glad it helped!

@johnkinnane547 4 жыл бұрын

G’day Lance this was a good one very interesting, I can’t get my head around “epee cycle” the only frustrating bit was seeing you line up the clutch pack ect. Good video, on another note I heard on Sky that the fires were heading towards Bundy I hope your not effected by it.... stay safe regards John

@BundyBearsShed 4 жыл бұрын

G Day John, Fires are good for the moment, look up planetary gear train.

@donvoll2580 4 жыл бұрын

Good day from Ont. Canada, At 1-20 you show us over-running gear. Yrs. ago I had IH with ta. They said my sprague clutch was shot, would that be same thing. Boy real good video. Thanks & Merry Christmas & a happy new yr.

@BundyBearsShed 4 жыл бұрын

G Day Don, No the sprag clutch is like a needle roller that only allows shaft movement one way, this does a similar job to that just a different way of doing it.

@poulgammelgaard8868 4 жыл бұрын

As you say in this video: We learn as we go. It is easier though, when we can watch your videos first. Regards Poul

@BundyBearsShed 4 жыл бұрын

G Day Puol, Yes I find it better to be shown something too, it helps to retain it all easier.

@rosscampbell4082 3 жыл бұрын

Another marvelous video. Excellent information and instruction. Thank you. On my MF165 with multipower gear box it is difficult (at best) to shift the gears when the multipower is in high. I've read comments in forums where others claim that is normal but when I got the tractor 3 years ago it was not that way. I'm curious if you have any thoughts on what might cause this.

@BundyBearsShed 3 жыл бұрын

Possibly the plates dragging from being warped a little,

@1500SCHLUTER Жыл бұрын

Oh so this is the widow maker part of the gearbox

@BundyBearsShed Жыл бұрын

Can be.

@BleuJurassic 4 жыл бұрын

if we got out your way you would not have to do the job three times great video as normal

@BundyBearsShed 4 жыл бұрын

Yeah the camera is a pain at times but thats just how it is. all good fun still.

@kenreeve6549 4 жыл бұрын

Hi Bundy Great info thanks ,any idea why my 3120 is stuck in low im completely stumped with this prob , thanks

@BundyBearsShed 4 жыл бұрын

Check your hi lo pressures and see if the valve is working, it if is probably warped clurch plates or sealing hook rings broken.

@muratkaymak1545 2 жыл бұрын

Thanks🔧👍

@BundyBearsShed 2 жыл бұрын

Welcome 👍

@danielarechiga2723 4 жыл бұрын

Love your videos... i even Volunteer to fix transmission on a 2950 even dough im no mecanic and rebuild hi lo pack and pto pack but when y got the tractor together i hear a klak klac sound if i move the lever to bunny instead of turtle it gets louder what could it be?

@BundyBearsShed 4 жыл бұрын

G day Daniel, It is hard to say, did you leave a thrust out by mistake?

@danielarechiga2723 4 жыл бұрын

@@BundyBearsShed they've been using it for a week now I guess the hydraulic fluid just needed to sirculate inside and there's no problem with it runs fine everything good thanks man