How to assemble the kiprok cable line for the Honda Legend, Grand, Supra fit, new fit, old Revo, Mocin. The first step we must know is the color of the cable and its function on the road spool, namely: 1.Black red line is the main ignition current from the spool directly into the cdi. 2. The blue wire, the yellow line, acts as a pulser from the spool directly into the CDI 3. The white cable is the main current for charging from the spool directly to the kiprok and make sure there is current. Its position is below the left. 4. the yellow cable is the main current of the lamp and goes straight to the kiprok, make sure there is a current. Its position is above the right. and for the black wire the red line and the blue yellow line have nothing to do with the kiprok line. for the kiprok path which is 2 more cables, namely: 1. The green cable on the bottom right is the negative of the kiprok and make sure it is attached to the body or motor frame. If the green cable is not plugged in, the battery will not charge and the light will quickly turn off. 2. The red cable above the left is as the output current from the kiprok and make sure there is current and it goes straight into the battery plus the bolt. And for the two ends of the fuse, one is connected to the bolt plus the battery and one cable in the fuse goes straight to the front with a color cable. red which goes to the ignition. and also the negative bolt of the battery, we can wire it and make sure it is installed or connected to the body or motor frame. Thank you very much to all #SUBSCRIBER#AND VICTORS wherever you are, hopefully the knowledge is useful. Please #SUBSCRIBE AND LIKE# #SIDIK NURYADEN CHANNEL# If you have any questions, you can write them in the comments Tel/WA: 085863491419. Thank you very much.