How To Assemble the REP PR-5000v2 or PR-4000

How To Assemble the REP PR-5000v2 or PR-4000 | Step-By-Step Instructions

Рет қаралды 77,754

Күн бұрын

Get ready to transform your home gym with the REP PR-5000v2, one of our best-selling power racks!
Note that assembly instructions are identical for the REP PR-4000 power rack.
Follow these step-by-step instructions, so you can start lifting in your new rack ASAP.
How To Assemble the REP PR-5000v2:
Step 1a) Build Right or Left Side on Ground (:40)
Step 1b) Build Opposite Side on Ground (3:40)
Step 2) Stand both sides up and install pull-up bar (3:30)
Step 3) Install Logo Plate (5:15)
Step 4) Tighten all hardware (bottom to top) (9:30)
Bonus Install! Weight Storage
Step 1) Loosen rear rack bolts (6:39)
Step 2) Install bottom crossmember to rear of rack (7:02)
Step 3) Install upright to bottom crossmember (7:20)
Step 4) Install top crossmember to rear of rack (7:34)
Step 5) Install weight horns (8:06)
If you run into any problems or questions while assembling your rack, email us at orders@repfitness.com and our awesome customer service team will help you out!
Visit: www.repfitness.com
Call: (720) 420-1731
Email: info@repfitness.com
Follow Us!
Instagram: / repfitnessequipment
Facebook: / repfitness

Пікірлер: 115

@xregularxjohnx 3 жыл бұрын

Note to PR-4000 viewers: at 0:23 he mentions using "a 36 socket." I assume he means a 36mm socket which may be the case for a PR-5000 but for the 4000 you will want a 15/16" (or 23.83 mm) socket for assembly.

@longhorn508 3 жыл бұрын

man thanks for that. I am headed BACK to lowes now...

@REPfitness 3 жыл бұрын

Ah yes! Good tip. PR-5000 racks have 1 inch hardware, whereas the PR-4000 uses 5/8" hardware

@laiphilip 3 жыл бұрын

After I watched the whole video i cant find what i need. I m glad I scrolled down to the comments. Thanks so much.

@sageollie 3 жыл бұрын

For the PR5000 V2 - 1" hardware, you can also use a "1 - 3/8" SAE socket, it fits on the nuts but not the bolt head.

@rickywilliams7397 2 жыл бұрын

Came here to say this!

@kyles8391 Ай бұрын

Video was a lifesaver as I'm putting together my PR-5000. Dan, couldn't help but think that you wouldn't have needed that step-stool if you and Matt had swapped roles while attaching the pull-up bar and logo plate!

@FiveStripedFalcon Жыл бұрын

Excellent video. Took me more time to unpack and clean the packing materials than building the rack.

@bigshowns1 Жыл бұрын

Awesome video. It looks like it's very high quality and easy to assemble!

@Shadburn 4 ай бұрын

The "Dan The Man" Interlude and Intro music is so epic! 🤣

@PatrickBarnesGreatBear Жыл бұрын

Just assembled my PR-4000. This video made it pretty simple. Like another post, it took longer to remove everything from the packaging than it did to assemble. Thanks.

@Dbright700 10 ай бұрын

How long did it take you?

@user-le6rk7dc7n 8 ай бұрын

Great video, made assembly a breeze. REP including a tool to reach nut in logo plate was a great addition.

@ltmusic8512 6 ай бұрын

Thank you for the video!!

@richards6431 2 жыл бұрын

I recommend using a box wrench instead of a crescent for the Logo Crossmember. A crescent wrench will not fit inside the cut out for the top hole on the Logo Crossmember, a box wrench fits perfectly.

@TheRealCR 3 жыл бұрын

Just got mine in. All blacked out. Such a beauty.

@Carlitos-on2 3 жыл бұрын

Nice video. That was a great tip to use the pull-up bar as a spacer for the bottom feet. You can also use 2x4’s cut at the same length as the pull-up bar in case the bottom moves. Or cut at 41-3/8” if you are getting the belt squat along with the power rack.This would be an 1/8” wider than the belt squat attachment and ensure a nice fit. For those getting the belt squat I would also suggest moving the bottom cross members as far up as possible. This will ensure alignment of the holes.

@Mexi99 2 жыл бұрын

Life saver! Watching this video it made 100000000x's better to install this. I just got the pr4000 and Lat attachment and it took me around 2 and half hours. I think it took me longer to see where I wanted to place the actual machine then to build it! Thank you! amazing video! Remember you need a 24mm socket for the pr 4000

@rebuildingrocketships 2 жыл бұрын

My exact experience too! Haha. Actually breaking down all of the boxes was the biggest pain ;)

@Mexi99 2 жыл бұрын

@@rebuildingrocketships So true! A ton of boxes! Did you get the front extensions? I did! I might return them if I can. this rack does not move at all.

@rebuildingrocketships 2 жыл бұрын

@@Mexi99 I did along with the spotter arms, iso arms, lat / low, and two extra extension posts for weight storage. This rack ain’t going to budge without the front extension legs! I suspected it’s more of a hassle to return tho so I’ll hang on to them for a bit and if I don’t need / want them I’ll try to sell locally. I worry I’m going to trip over them 😂

@Mexi99 2 жыл бұрын

@@rebuildingrocketships Yea i was going to return them but it's such a pain. %15 restocking smh. guess ill hold on to them lol

@Mexi99 2 жыл бұрын

@@rebuildingrocketships Yea.. I'll probably try and sell my safety spotter arms and the front stabilizers. pretty much useless since i have the flip down safeties and getting hit with the 15% returning fee isn't worth returning at that poiint im losing money

@TheFirstRealChewy 3 жыл бұрын

Good video. I got the 4000 and am assembling it now. I don't have a helper so I'll assemble it on the ground and walk it up. Will see if that works.

@84_Gor 3 жыл бұрын

I purchased the same. How did it go with no help??

@KSxPharaoh 3 жыл бұрын

I love seeing the 4000 in stock throughout the day. That tells me I'll easily be able to grab one when I'm ready. Blue uprights and gloss black crossmembers. Now I just need to start seeing the bumper plates or sport plates in stock. You'd think it'd be the opposite.

@alexlee6993 3 жыл бұрын

no longer in stock. LOL. I've been waiting to make sure I can budget for it the past 3 days...and on the day I was going to purchase.....NOT IN STOCK NO MORE :(

@KSxPharaoh 3 жыл бұрын

@@alexlee6993 check daily it's restocked a lot but the parts like safeties n attachments have been out of stock forever

@REPfitness 3 жыл бұрын

The PR-4000 is in stock now at www.repfitness.com/strength-equipment/power-racks/pr-4000-series/pr-4000-power-rack. We'd recommend you act fact as this is one of our best-selling racks!

@blythg1394 2 жыл бұрын

What is the correct amount of torque needed to tighten bolts on PR5000

@DesignBuildLift Жыл бұрын

This was a great help! Thank you!

@miguelmacias1714 3 жыл бұрын

What’s up with the expansion bolt what can I use them for ?

@spadecheck8874 3 жыл бұрын

I'm going to get one this month.

@REPfitness 3 жыл бұрын

YESSS! Welcome to the REP rack club! What color are you going to get?

@spadecheck8874 3 жыл бұрын

@@REPfitness you guys are out of stock on alot of things.

@jamessderby 3 жыл бұрын

Mine just got here woohoo

@REPfitness 3 жыл бұрын

Oh boy! Happy REP Delivery Day!

@rickywilliams7397 2 жыл бұрын

It’s already been said but I’m here to reiterate. The 5000 rack might need a “36 socket” (36 mm) but the bolts for the 4000 rack use a 24 mm socket. If you don’t already have this size socket at home (I did not) just take a bolt with you to the store to verify the size.

@Bjustis2222 8 ай бұрын

Thank you. Big help 4000 user here

@nightroad102691 3 жыл бұрын

To everyone wondering when the item will be in stock I would reccomend buying the parts separately. You do pay roughly almost $100+ (i could be off on the math so my bad). Since everyone is making a gym garage/basement most if not all companies are sold-out/back-ordered but they do sell the parts separately still. Just don't make the same mistake I did and buy 8 crossmembers size 41" for a six-post-rack... make sure you have your rear crossmembers as a 16".... other than that I'm glad this video is available because I haven't seen anyone else put up an assembly for the PR-5000 v2.

@TwoWheelNinja 3 жыл бұрын

More like end up paying $1000 extra in shipping

@REPfitness 3 жыл бұрын

Great tip - We're excited that we're able to offer that option to buy the rack components individually. Not only does that allow you to get pieces as they come in stock during such high demand, but it also opens up the door for future upgrades to your configuration!

@nightroad102691 3 жыл бұрын

@@REPfitness 4real I've been doing that and I pretty much got all my equipment and by observing the ETA List/ IG Updates. Most of my equipment was shipped together. I just placed another order 2min ago 🏋🏾‍♂️🤙🏾

@privtprofile24 8 ай бұрын

Could I technically lower the top crossmembers by like 3-4 holes? I have a 94 inch ceiling so I wouldnt be able to mount the multi grip pullupbar. I dont like the upside down mounted pullupbar since I want to be able to do ultra wide grip pullups. The 80 inch rack is too short for me to do standing OHP.

@sking379 Жыл бұрын

What size are those bolts..? 1 inch by 4 or 5 inches..?

@blackhemi04 3 жыл бұрын

Can I use a impact wrench to tighten everything down or will it dimple the metal?

@taydru36 3 жыл бұрын

You can I used my impact wrench no problem.

@blackhemi04 3 жыл бұрын

Does the PR4000 come with the locking washers? I don't recall having those with the PR4000.

@REPfitness 3 жыл бұрын

The PR-4000 comes with nylon locking nuts (whereas the PR-5000v2 comes with split lock washers) Email info@repfitness.com with additional questions.

@CraftLulz 2 жыл бұрын

How much does the pr-5000 weigh?

@gilldaman6259 9 ай бұрын

The nuts are a bit different in the pr 4000 I just received. I'm assuming they are meant to eliminate the need for the locking washer but I can't seem to hand tighten them. Is this normal?

@REPfitness 9 ай бұрын

They are probably lock nuts - www.homedepot.com/b/Hardware-Fasteners-Nuts-Lock-Nuts/N-5yc1vZc2ez

@brandonfig9630 3 жыл бұрын

Where do you begin tighten the wrack? I got the 5000 with weight storage just don't know where to start

@REPfitness 3 жыл бұрын

Hey Brandon - drop us a line at 720-420-1731 or hit up info@repfitness.com and our team can help. Also - we have assembly instructions on our site - help.repfitness.com/article/76-pr-5000-v2-assembly-instructions

@Brandon-sb8li 2 жыл бұрын

I really don’t plan on bolting into the concrete so is there a way I can secure it without bolting? Like do I need plywood or something underneath and bolt into that? If so, what exactly should I get? Also, when will the front foot extensions be back in stock in case I do need it?

@anubis24354 Жыл бұрын

I know this is an old comment and you’ve probably figured this out by now but for other people that may pass by this in the future here’s what I’ve found if you don’t want to bolt it down. If you have the 41” rack it should be stable enough without the feet IF YOU ARE NOT going to lift outside the rack with safety spotter arms. If you have the six post configuration, it’s supposedly sturdy enough to lift outside even without front feet, especially if you’re actually using the extension for weight storage. Still not sure I’d feel comfortable doing so. The big takeaway is that with a 41” depth rack the real question is will you be squatting outside the rack with spotter arms? If no, you’re probably good to go. If yes, you probably at least want the legs. The rear base stabilizer seems to only be needed with smaller configurations or with the lat pull-down/low row attachment.

@chrisheizmann8516 9 ай бұрын

@@anubis24354 What about a 30" and doing reps inside? Safe-ish? I am in a rental for a few months and cant bolt to the garage floor here.

@Bmoseley85 3 жыл бұрын

I just ordered my PR-4000. What size sockets do I need to assemble that one?

@REPfitness 3 жыл бұрын

Hey Jaymes! Email us at orders@repfitness.com and we'd be happy to help you out with any of your assembly questions!

@futbol1972 2 жыл бұрын

So the PR 5000 is the same as PR 5000v2. I built my rack at rep fitness its a pr5000. Iam a little confused I chose the 80" rack and 30" if I buy lat pull down attachment and stabilizer I won't need to bolt it down correct?? Will the rogue leverage arms work on this rack? OK this is my dilemma.🙄 I currwntly have this set up PRX wall rack and separate valor lat pull down machine, separate rogue pull up bar, separate rogue band station with matador dip attachment and landmine (this is what I currently have right now) and many of other things.. I want the rogue arms so for that I will have to get another rack I think so I been looking at the one mentioned avobe..now if I get the pr5000 with lat pull down, rogue leverage arms, dip, land mind and pull up bar attachments I can sell all my other stuff and this way I will have everything consolidated in one rack..don't know if I will like everything cramped up in one place though🤔🤔. Or maybe just replace prx wall rack with rogue wall rack and keep everything else in separate stations like I have it now??🤔🤔

@REPfitness 2 жыл бұрын

Hey Marco - I see your comments on a bunch of our videos. Hit us up with all the questions you have - info@repfitness.com or 720-420-1731 - we love talkin equipment.

@johnnygunzfilmbuff7821 6 ай бұрын

I'm rearranging my home gym and what kind of tools do you use to take the pull up bar down? I'm putting a wall mounted cable pulley system up and moving my rep 5000 power rack.

@REPfitness 6 ай бұрын

Hey Johnny, best to reach out to our customer support team (phone/email/chat/text) at the bottom of our site and they can get back to you with specifics.

@johnnygunzfilmbuff7821 6 ай бұрын

@REPfitness okay ty.

@jorgetorres9360 3 жыл бұрын

When assembling should the numbers on the 4000 be placed facing me? And should this be done for all posts? I ask, as this determines where the holes end up inward or outward for bolting the bottom posts to the ground.

@REPfitness 3 жыл бұрын

Please contact our team at info@repfitness.com - they respond in hours! (We also have chat for a near instant response)

@ChristopherHerbertherbietown Күн бұрын

Oh man just answer the question here for everyone else!

@fernandoaustria6350 Жыл бұрын

did they stopped selling that rear stabilizer? I don't see it on the website anymore.

@REPfitness Жыл бұрын

repfitness.com/products/rear-base-stabilizer or type in 'rear' in the search function on the top of the site.

@TheSauceistheBoss 2 жыл бұрын

I mean there are not numbers on each side of my 4000, you guys need to put a sticker on that says left or right that'd make it easier

@ZenithsCipher 2 жыл бұрын

Just assembled mine today. One issue: I can’t find a way to tighten the upper bolts for the nameplate, there’s not enough space for an adjustable wrench to reach the nuts inside of the nameplate. I have to order a 36mm wrench for them.

@kellerv.602 2 жыл бұрын

hey did you ever figure it out? I’m having the same issue

@robertgmatlack3222 2 жыл бұрын

I used a pair of visegrips on the inside nut while I tightened the outside with a 36mm socket

@simsjw Ай бұрын

@REP do you recommend assembling the PR-5000 b4 adding the Aries (2.0) or should i wait to assemble all together?

@REPfitness Ай бұрын

Either way will be fine! If the Ares is on pre-order we suggest to build your rack so you are able to use it before your Ares gets to you!

@simsjw Ай бұрын

@@REPfitness ok great. BTW, we would like a pec fly system outside of using the cable. I say "we" cause I'm now team ReP 😉

@grantf. 2 жыл бұрын

Do you guys have a ft-lbs torque to tighten the bolts to? Just got my 5000 v2. Mine came with no instructions.

@REPfitness 2 жыл бұрын

Here are the instructions: help.repfitness.com/article/76-pr-5000-v2-assembly-instructions As far as tightening the bolts, go a quarter turn past where it feels tight. Do not overtighten the bolts as you can bend the steel and these 1" bolts are secured with the washers as well.

@grantf. 2 жыл бұрын

@@REPfitness awesome thank you! I'll keep an eye on the tightening, I'm using a torque wrench so I'll start low.

@bench175 Жыл бұрын

@@grantf. What torque did you use? lol. I wish REP would figure it out.

@grantf. Жыл бұрын

@@bench175 it was 40 foot pounds. It seemed to hold everything snug without bending metal.

@sheckyshabazz 2 күн бұрын

The site only recommends the stabilizer for the 41" depth rack. Does that mean a 30" depth rack has to be bolted down?

@REPfitness 19 сағат бұрын

We always recommend to bolt the rack down but the bigger the footprint the more stale your rack will be. If working on the outside of the rack we suggest adding the front foot extensions- if you dont have weight horns on the back of the rack we also suggest bolting the rack down or having front foot extensions so the rack wont tip over.

@Moonkey-d4b 3 ай бұрын

What’s the item number for the bolts

@nickclaro5444 3 жыл бұрын

i want that clear coat but oos

@josephduckworth1858 Жыл бұрын

Honest question.. why do you need a 6 post set up for weight storage? That seems unnecessary. Cant you just put weight horns on the back posts of a 4 post setup?? Thanks!

@REPfitness Жыл бұрын

Hey Joseph - it would interfere with the plates on a loaded bar when working inside the rack. For a faster response, drop us a line here or give us a ring - Thanks! - repfitness.com/pages/contact-us

@hajirbrain 6 ай бұрын

Can I set up in a sloped garage without leveling ? Looks like the base does not have any adjustments for unleveled flooring

@REPfitness 6 ай бұрын

You can use some shims (many stores sell them) to level out any uprights that may not hit the ground. It's also important to put the rack together with bolts loosened, find a spot you want to set the rack, then tighten them all down. This will help with keeping the rack level.

@Didewro 3 жыл бұрын

Can i order this in low ceiling version?

@REPfitness 3 жыл бұрын

80" uprights are our shortest option for the PR-5000v2!

@elvelos7936 9 ай бұрын

I don’t see a how to install video of the athena functional trianer.

@ThEk1dViC Жыл бұрын

The hardest part is the rep plate. If your floors are uneven of any measurement, good luck. 😂

@Oqa32467 4 ай бұрын

Can you carry all the boxes into a house down a flight of stairs by yourself ?

@32cviper 2 ай бұрын

Uprights and crossmembers came in pairs in separate boxes. I was able to carry the boxes by myself. Boxes for uprights were the heaviest but doable.

@jeremiahyeahheah506 3 жыл бұрын

"We do offer the rear base stabilzer" No, no you dont. Its been out of stock forever and the eta date has changed like 20 times already. Latest was 2/2-2/8.....now 2/15. Can't wait to see it change again!

@REPfitness 3 жыл бұрын

We understand the frustration here - unfortunately, we've had to update some of our ETAs due to unexpected delays in our supply chain. We update our ETA page daily to reflect the current situation based on these factors. Please email info@repfitness.com if you have additional questions.

@nightroad102691 3 жыл бұрын

It is in stock right now

@jeremiahyeahheah506 3 жыл бұрын

@@nightroad102691 ordered it early Monday when it came back in stock. Thanks for the heads up though

@VishalNarayanSaxena 3 жыл бұрын

I got my 6 post with front stabilizers, getting to start the assembly. do you know if I need to bolt the rack into the platform?

@marquisegoodwin2481 2 жыл бұрын

0:25

@MakingYouCASH Жыл бұрын

How the hell do you install a 6-post rack!!!

@REPfitness Жыл бұрын

Drop us a line - happy to answer any questions - repfitness.com/pages/contact-us

@Egghead1199 3 жыл бұрын

How tall is that giant jeez

@REPfitness 3 жыл бұрын

Tall! Very tall!

@HighSpinSwingSpeed 2 жыл бұрын

Iron workers always have the nuts up and out. Never down and inside.

@pivan18 2 жыл бұрын

Very disappointed in customer service for updates on orders that are 2 weeks late. Im missing part of my order, have not got a response for the reason

@kevintjahjadi8994 Жыл бұрын

It’s NOT a 36 socket. It’s a 24. This video wasted me two tripes to the hardware store. Cmon Rep…

@REPfitness Жыл бұрын

Dan is putting together a PR-5000 in the video, which uses a 36. The title includes PR-4000 because it's the same steps, but the PR-4000 does use a 24. Hope that helps explain that. Apologies on the double trip.