Great video that shows what all the other videos didn't mention and left out.

This is what i needed to see before i installed my timing chain . good explanation. He eaven tells you wich way to turn the bolts. Very useful video.

Thanks bro for your detailed explanation and teaching. You never disappoint me. Lot of mechanics are find it hard to adjust and align the vvti\vanos gear with camshaft position. They don't know how should camshaft "teeth" that open and close valves face. It is a challenge for many that they find it hard to admit. Modern car are a challenge for lot of mechanic. They cannot Rev up high and adjust idling with a flat screw driver anymore

You are the best doctor, you always make it clear on your videos, may god bless you

I like this guy, your explanations are superb, thanks man

Great job man these are great videos keep up the good work and thanks

You are the best! I did the timing chains on my 5.7 tundra, now I’m ready to do the one on my 2010 Corolla 1.8. I check TDC with a rubber glove finger on the spark plug tube, once it blows the rubber finger , I know I’m good. 😅

Thank you, Engineering. You have all the respect and appreciation. A simple and clear explanation that gives you wellness. Thank you very much, Engineering.🥀

Excelente trabajo! Buena demostración !gracias Pedro!

EXCELLENT INSTRUCTION. BEST ON KZfaq! THANK YOU.

Excellent work Peter!

Thank you so much so going so deep in the installation help me a lot thank you

Yes sir your a pro better than any Haynes book !! MUCH RESPECT Thanks sir

Outstanding demo…very well explained and illustrated!!

Thanks, exactly what I was looking for.

I am currently working on one, thanks for the information

Peter excellent work mate keep up the good work and i have subscribe your channel 👍

Excellent Introduction again!

Great video. Im so grateful with you. Thank you, my friend.

great video thanks

Muchas gracias buen video

Thank you Peter I followed your instructions to set the timing on my 1.8L 2Zr-fe engine and my p0015 code has disappeared with check engine light off. Thanks big fan of your channel from Nigeria

Penjelasan Yang sangat detil.... Terimakasih om 😁

Awesome video. Simple, short and useful. Thanks !

You should create a second channel with ASMR tags. You have the gift for it.

Great info Peter. Thx. Hey, I have a 2017 Corolla EX.... does it have a "chain" or "rubber belt" timing???? Do I need to change at a certain point??? Has at this time 37,000 miles. Can anyone answer pls.....

Great video. I have a 2010 Corolla S with 223k miles on it. In Neutral, it revs to 1500rpm. I think that's not normal. Would you think the timing is off from chain stretch?

Great job am with you engineer John

Hi peter, I have a question for you. I am working on this same engine. I was turning the crankshaft and the timing chain jumped off. I didn't notice it and had already turned it over several revolutions (3 or 4) before I realized this. Currently, piston 1 cylinder is up and piston 2 cylinder is down. The two cam lobes also point upwards like you say they should be. My yellow link is in the correct section on the crankshaft and 1 of my orange links up top is in the correct spot on the exhaust cam gear. The only problem I noticed is that on the intake cam gear, instead of being on the correct line for the orange link.. it's on the other line. Will this be okay? Or will it have to be on the other line that it used to be on? Everything else is setup properly.. just that distinction in the intake gear. Sorry for the long description!

Greetings, those motors if the chain is mounted badly they bend the valves

Great information in video! I followed exactly but I have camshaft position sensor code. I turned the reluctor wheel on the crankshaft with my hand when I put the new sprockets on the crank. I never lined it back up, or turned it back. Is this why I have a problem with running and idling? My timing is perfect on the chain thanks to this video

Hey soo I think my timing chain on my tarago needs replacing but I'm not sure . There's a knocking sound when the engines cold but 9nce I warm it up the sound gos away. And also when I turn the air con on it almost gos away fully. Any ideas

Gracias on this engine it helps the slow explanation

Nice timing how do you think if have tree cam shaft

Are those camphasers in the right position? My 2010 Camry are opposite side.. or they are different from corolla..

Hi Peter, I have subscribed and given thumbs up! At around 8:03 you say number 1 piston is in the UP position. Do you know it is in the COMPRESSION stroke and not the POWER stroke because both intake and exhaust camshaft lobes are in the UP position so therefore BOTH valves are closed? (meaning COMPRESSION stroke) Thanks.

Excellent job 👍🏻 keep it up bro.

Excellent expraination I thank you for the lesson

It's very clear how u work correctly,, changing timing chain properly,,all the timing is exactly seen,, which is harder to change timing belt or timing sprockets,

Good job. I have noticed that this engine has no tensioner or it will come later?

Good job 👏 👏👏

Thanks for the excellent job.

Is this similar for Toyota 2016 cvt?

Mmmuchas gracias por compartir tus conocimientos. Me ayudo bastante

Hi sir , good video I just asking did you remove the engine to change just the chain ?

Hey Peter, what camera do you use to film your videos? Ty.

Thanks for teaching

Hi thank you for sharing video, how long Toyota corolla 2011 should last and change thank you . Have a nice day

Super work brother

thnx very nice engine piston ring install is the next video please sir

chain change Toyota Camry 2010 3.5 v6 is recommended to change in how many kilometers or miles?

What does it mean misfire cylinder 4 09 corrola 1.8 engine thanks

Great work bro Peter

Can you do it while the engine is in the car?

Good job thanks so much

Thank you for that information 👍

This is a good one, so interesting..

Would this be the same process for a 2006 Corolla?

What is the possible problem sir if have spark have fuel have compression but wont Fire or start new overhaul

May God grant you heaven brother thank you!

جيد نتمنا مواصلت الفديوات

The dent actually is a timing mark or is called a punch mark.

Good job and I like that

do you have a video for a 2009 GM Vibe or a 2009 Matrix 1.8

Excellent job 👍

Thank u from algeria

Very good I like this.

Thank you for the information.

My timing chain broke so I have to start completely over . Can it be done ? None of the marks line up at all . I’m freaking out . Can you help me ?

عملك جيد لكن تتكلم كثيرا وهذا ما يزعجني

Tanks for the help.

Is this the same engine in a 2012 Prius V ?

Ur good teacher

Hi I have a problem when I go uphill or excellorate may engine is making a ping sound, can hear it clearly at 3000rpm

Thanks sir

Hi how abnout 1.8. Toyota pruis. Timing gear

This is 3zfr-fe motor?

Sir thankas I forme india but i worke Saudi

شرح ممتاز وراع👍👍👍

This is very interesting

Thanks

So very nice 👍 information

Great job

Good job 👍🙏

Thank you dr

Good job thank u

Thank you Boris for information

Thanks so much sir

thanck my friend

Anh nói rất chi tiết

Hi bro. I'm having issues with my timing. My mechanic isn't get it right which is making my toyota corolla 2009 misfiring. How can you assist me?

Is there any engine similler to this one

Thank for formation.

after thjs was done...my car has been idling roughly and going louder when i revs

Video that is great

Thanks so nice

Good job boss

Msr. Peter

Yes please

Hi do I need to woorry about the oil chain being set,Like the timing chain?