How to balance & sync motorcycle carbs the easy way

Рет қаралды 62,985

MoreBikes.co.uk

10 жыл бұрын

Balancing (or synchronising) the carburettors on your motorcycle is an important job. Poorly balanced carbs (and fuel injection systems) will cause your bike to run rough, but using the Morgan Carbtune, available from www.carbtune.co.uk, it's a quick and easy job. This video shows the process for a 2000 model Honda CBR 600 FY, but it doesn't matter whether you have a Kawasaki, Yamaha, Suzuki, Triumph, BMW, or any other bike -- a vintage classic, or a modern machine -- the steps are basically the same.
Motor Cycle Monthly is the UK's BIGGEST bike monthly, and you can pick it up for FREE at dealers, clubs and biker cafes. Or read it online every month at www.morebikes.co.uk/mcm

Пікірлер: 13

@Mutifidus 2 жыл бұрын

We are working on a 1931 V12 Cadillac with dual carburetors. This is the same ( practically, no mercury in this ) one referenced in the dealer shop manual. Manual states emphatically that you will be frustrated if you don’t use this gauge. 90 years over and still the best tool to get the job done !

@Bill97070 5 жыл бұрын

Thanks for the video. It's a help as I begin to do a periodic double check on my 82 Suzuki GS1100G. For me, it's four carbs and three adjusters that throw me. The manual says balance carbs 1 and 4 then 2 and 3, in order of #2 adjuster, then #1, then #3. I've been hit and missing, not figuring how it works. That has thrown me, but I think I finally have figured it out. Also, the lock nut when tightening the idle adjuster, seems to always move a little, throwing the setting off.

@SCB666 10 жыл бұрын

This really demystified it all, thank you. I guess if I just got an FI bike it's one less thing I'd need to do but worth knowing about.

@justinbustin677 5 жыл бұрын

Show where and how to connect the the vacuim lines

@MPDano 6 жыл бұрын

This is a good video. Except what screws are you adjusting? AF or is there another screw somewhere else? New to triple carbs. I am used to ATV single carbs.

@jefersonvilaede 5 жыл бұрын

thats it??? Im glad I looked it up, Im gonna try myself and not pay someone else to do it, who may or may not do it well.

@FaithisKey792 Жыл бұрын

Thank you for sharing.

@ethandurtschi1990 9 ай бұрын

Do the tubes connect directly to the carburetor in between the butterfly and the motor? Looking to adjust the valves on my fzr600

@ScoutSniper3124 7 жыл бұрын

Great video, thanks. When you've finished balancing the second set to each other, and want to balance them both to the first set, is their one screw to do that, or do you adjust both of their screws and if so, counting the amount of the turn, or eyeballing it off the gauges? Thanks. I have a 1988 ZX-10, excellent condition, that I'm taking out of storage after a decade or so, and getting back on the road, got come cobwebs to deal with. I cleaned the carbs thoroughly, and now have to tune them.

@roybm3124 Жыл бұрын

The middle screw levels the 2 pairs.