@AyanAli-ew9sw 4 жыл бұрын
Your channel is the first place I run to whenever I find myself stuck while doing a design job. Thanks a million times!
@silenterection 9 жыл бұрын
Yes mate, I wot Thanks for the videos man, Never thought I'd find any inventor tutorials that I actually enjoy watching.
@Neil3D 9 жыл бұрын
William Anderson Thanks! Too many tutorial sites are people just doing stuff, with no talking, I've no idea what they think people can get from that!
@scottstewart6624 5 ай бұрын
I saw this years ago, and 2024 finally had something to try it on! It didn't work, but I remembered it was here and was glad of it. I was trying to notch out a bit of RHS and then fold over the notch. It didn't work.
@ChuckKarl525 Жыл бұрын
7 years old and still relevant. Thanks!
@tonybeal5673 6 жыл бұрын
So all these years I've been doing the hard way, cheers bloke....BRILLIANT tutorials you make.....keep up the great work there buddy. Cheers, Tony Beal
@ninios2007 6 жыл бұрын
I really like how you explain the procedures. Very simple and straight forward. Hope you will continue this great work.
@kkoozzoollss 9 жыл бұрын
Hey, mate! I'm new to Inventor and was looking through some tutorials, but they all were just plain boring and basic, but then I found your channel. Your video are just great, very useful and enjoyable to watch at same time. Keep up the good work, I'm loving it! ;)
@Neil3D 9 жыл бұрын
Kristaps Ozols Thanks chief! Much appreciated!
@jamesgodby112 8 жыл бұрын
Very informative. This will help me finish a project I am working on for one of my professors at school. Thank you so much!
@bernienufc3166 7 жыл бұрын
What a bloody star, I was just wondering how I as going to do this, thanks
@ericsaldana9451 7 жыл бұрын
Always really good videos! Thanks
@peterwalter2034 7 жыл бұрын
Bend part is straight forward enough. But what about returning it to a flat pattern (like sheet metal) to show the shop where to mark the parts to make the bends?
@JK360noscope 7 жыл бұрын
I'm running into the same issue. The parts are "previewing" exactly the same position with no bend in sight... What I'm having to do is to recreate the part and "bend" to see if I can recreate something that looks... well, similar enough
@ludmilaaltman257 6 жыл бұрын
It is very old command. From "Designer" or MDT program. When I explaind why I prefer Inventor and.not SW, I told: "We can bend everything!"
@kantorobo7718 7 жыл бұрын
This saved me a few hours of work! Keep up the good work your channel is very helpfull.
@gaellemuunGenemuiden 6 жыл бұрын
Thanks. learned a bit again today!
@thedelig1312 7 жыл бұрын
Hello, great video. What about returning it to a flat pattern for Docu.?
@michaelt4672 8 жыл бұрын
SWEET I CAN APPLY THIS TO A PROJECT THAT I WILL BE DOING IN THE FUTURE!! AND I WAS SRACTCHING MY HEAD HOW TO TACKLE IT. LOL THANK YOU AGAIN YOUR DOING A GREAT JOB
@sufyanpatel4746 8 жыл бұрын
Unbelievably helpful. Thanks alot.
@PASHKULI Жыл бұрын
Bend command is the main functionality in a Sheet Metal env., should be self evident by now.
@Neil3D 9 жыл бұрын
Can't reply to your comment as you've disabled it but yea I was thinking about it! Not sure if I have the time to put enough effort into it but I was just playing about with a few ideas yesterday and that part was one of them!
@brunopaulino7759 9 жыл бұрын
Nice tutorial! But, i'm wondering if it's possible to make the tube flat pattern?... This is it was nice... :) Thanks,
@leonelgarcia7327 4 жыл бұрын
Hi, thanks for share, I would like to learn, how did you bend the second part you showed. Best Regards
@iamwonder9300 6 жыл бұрын
Great job as usual!
@chris-non-voter 2 жыл бұрын
I bent a plate that had geometry at the end, it - (the geomtry and shape) didn't go with the bend, it stayed put floating in thin air even though it was constrained to the end of the plate. The bend tool has limited use. Good video though. Thanks.
@aadithyasathyanarayanan9397 8 жыл бұрын
can you make a video about the section feature in inventor ..
@SouthAfricaKnowsBest 6 жыл бұрын
you fookin dansa. spot on tut!
@nighthouzerx1799 6 жыл бұрын
so helpful
@YuriFurry 8 жыл бұрын
You're funny af
@TheLk0998 9 жыл бұрын
Are you doing the linus tech tips headphone holder thing?
@chadweigelt5157 4 жыл бұрын
Thanks a lot keep it up!
@guilhermemazorra1746 7 жыл бұрын
Hello Sir, is How do I do that on the Fusion 360? Looked for it everywhere and nothing. Is there any easy way to ben a flat plate other than having to sketch the angles and then extrude it? Thanks
@SupermuzuDK 7 жыл бұрын
Excellent tutorial! :)
@Myxocondrial 6 жыл бұрын
Thanks for the videos. Can you help me with this? How do I bend a part by torsion?
@SQuiDFPV 27 күн бұрын
nope, cant get this to wrk. bend line is an impssible task
@tinle7327 6 жыл бұрын
How to bend 360 degree in Inventor? thanks for sharing.
@lyudmylawest5861 6 жыл бұрын
is there Twist command? I need to model twisted links.
@rasmus7068 6 жыл бұрын
Question: How do you make an unfolded version afterwards. I need a flat pattern view for my drawing.
@Neil3D 6 жыл бұрын
Yea you can't flat pattern unfold this, it isn't a sheet metal module function. Sheet metal has commands that'll do a similar thing to bend part but will then flatten out
@devduttmukherjee6568 8 жыл бұрын
Brilliant!
@sebastiandelamaza8440 6 жыл бұрын
i can´t find this option in fusion 360, do you know how to do it in fusion?
@lawrencecasey4955 4 жыл бұрын
"Press 'dislike' if you're a knob-head!" Brilliant! :)
@IsaacBlanc 8 жыл бұрын
That was brilliant! Cheers :-)
@36garrison64 8 жыл бұрын
why wouldn't my modify ribbon be available to select
@zeljanac 7 жыл бұрын
Hello, great video. Have an issue. Is there possibility to realistic bend a rectangular tube with real radius?
@Neil3D 7 жыл бұрын
+Tibor Molnar Yea the only thing for that is the tube & pipe environment in Inventor Pro, that comes with steel tubing which can have min bend radius input into it. I don't have any tube & pipe tutorials yet but there are plenty other people who have done them so it should be easy to find
@Akosyeah 9 жыл бұрын
i was wondering if inventor could help me with some metal castings i wana make. i want to to calculate the shrinkage and the machining neede with the least effort possible.
@Neil3D 9 жыл бұрын
mataz farouh Nah sorry Inventor won't calculate shrinkage during casting of metal parts. It has a module for tooling and injection molding of plastic parts but it doesn't do liquid metal
@TheStringingMan101 9 жыл бұрын
good video, mr. mate. regards
@4473021 9 жыл бұрын
Hey great tutorial! I'm using the 2015 student version of Autodesk Inventor, and the drop down arrow under the modify ribbon doesn't exist at all.... thus leaving me with no access to the bend a part tool, nor move bodies or copy object. Any clue as to whether this is a feature taken out of the student version or if the tools are just hidden? The drop down menus do exist on other tools in the ribbon, just not under modify.....
@Neil3D 9 жыл бұрын
4473021 Hey, I'm looking at 2015 here now and it's all there! The student version is exactly the same as any other version, it's the same program but you just use a different serial number so you have everything there. Are you definitely in an IPT file? Not an assembly?
@4473021 9 жыл бұрын
TFI CAD Tips I actually figured it out just now. As I only started learning autodesk inventor (and CAD altogether) just earlier today, I did not realize you had to double click the part (I'm guessing it's because I'm working in an assembly) for the drop down menu option to show. Thanks for your kind intentions though, your videos have been really helpful! ^^
@MrAlexanderh1 7 жыл бұрын
Stop cracking jokes I laugh to hard and have to rewind.
@m188225 7 жыл бұрын
'Dislike if your a Knob-head'... Hahahahaha... :)
@AtomicusPrime 8 жыл бұрын
What were you clicking from 2:11 to 2:15? Just arrows?
@AtomicusPrime 8 жыл бұрын
Hmmm... there's so much I don't know. I probably don't know what you were clicking because I also don't know what prompted the sniper cross hairs/circle that appeared just before the clicking that showed the slicing views.
@Neil3D 8 жыл бұрын
That was holding down F4 and the left mouse button to do an orbit, also I think at one point in there I pressed F7 whilst in a sketch to slice the part in half but that wasn't relevant or contributing to anything at that time! But yea hold down F4 and left mouse to orbit.
@AtomicusPrime 8 жыл бұрын
+TFI CAD Tips ah perfect! The F7 was definitely what caught my eye first but I'm happy to learn both, thanks so much. I'm switching over from autocad and haven't seen the list of shortcuts yet. I spend half my time watching/inspecting people install a roof on a huge casino right now and I'm eager to get home and get those short cuts into my razer naga. Do you have a video of your favorite shortcuts (macros) up yet? Your videos are the best!!
@retrotellephone 7 жыл бұрын
3D mouse my man, 3D mouse. It will change your life.
@Neil3D 7 жыл бұрын
+retrotellephone I've got two SpaceMouse Enterprises, two CadMice, a SpaceMouse wireless and done two giveaways on the channel for SpaceMouse Pro's! This video was probably done years ago before I started using one on KZfaq, as a trainer you should really use the application functions but I changed that later on
7 жыл бұрын
hi, please, is it possible bending .iam part??
@Neil3D 7 жыл бұрын
An iam and part are different things, but no you can't bend an assembly if that's what you mean
7 жыл бұрын
thank you!
@adisyuk2 7 жыл бұрын
you. I like you,
@Bored_Komunist 6 жыл бұрын
You talk too much
Tech3D
Рет қаралды 50 М.