How to: Bending less than 3/4inches on a Tapco or Van-mark siding brake

Рет қаралды 17,768

2 жыл бұрын

video from our new InnovaTools How To Serie, let us know if you have any questions or your thoughts and share any other tricks with us so that we can add them to our library!
www.innovatools.ca for all brake accessories to fit your tapco or van mark brake and make you more efficient. High performance tools for contractors by contractors.

Пікірлер: 24

@OrrangeConstructionInc Жыл бұрын

Those are the slickest tricks to know. Thanks for sharing

@innovatoolsinc Жыл бұрын

my pleasure! thanks for the feedback!: )

@l.d.lepage1506 6 ай бұрын

Nice! Fantastic trick, the wood spacer for the 3/8 or 1/2 J channel works great on my old Tapco, very replicable

@innovatoolsinc 6 ай бұрын

Thanks for your feedback! Indeed it is sometimes the simple things that give the best results!

@aluminumtrim 5 ай бұрын

Good stuff. I have also used scrap aluminum under the metal i need the narrow bend on. So the hinge has something to contact, and bends the piece i need bent

@deborahcopeland2119 Жыл бұрын

The wood bit is a good idea. I always struggled getting small bends like that.

@innovatoolsinc Жыл бұрын

Its the simple things that usually work best 👌

@bobwhelk2117 Жыл бұрын

Wow! That’s actually pretty amazing!

@JustinCrediblename 11 ай бұрын

damn I'm so used to .060" aluminum and .020" stainless... those bends look so easy!

@ajs96350 Жыл бұрын

I want that slitter, my Vanmark slitter is losing it and that looks like a huge time saver.

@innovatoolsinc Жыл бұрын

good morning! it is available directly on our website at www.innovatools.ca let us know if you have any questions!

@ajs96350 Жыл бұрын

@@innovatoolsinc Yeah, I went to buy it this morning and my card was shut down by my bank, what time do you open?

@innovatoolsinc Жыл бұрын

@@ajs96350 My cellphone number is on the website (613-978-2637) im almost recheable all the time;)

@AllAmericanGuyExpert Жыл бұрын

How consistent can you make that J-channel using the wood? It looks great for a one-off, but I don't know about making lots of it unless there was a really good reason.

@innovatoolsinc Жыл бұрын

Super consistant with the wood piece as it acts as a stopper... if you but against the wood accurately you'll be bang on everytime. The wood prevents any slippage and guarantee accuracy/consistency which you wouldnt have the guarantee of no slippage any other way....

@martinsanders4087 Жыл бұрын

I bought a stortz perfect bender and it can pretty much bend anything a standard brake cannot.

@alexandrecloutier41 Жыл бұрын

Hi Martin, I don't think you'd be able to bend a 3/8'' ''tall'' J-trim with the Stortz Perfect bender unless i'm missing something? it's also much more time consuming to roll the full length than bending on a brake if you can get the full length to fit your brake!

@martinsanders4087 Жыл бұрын

Perfect bender can make a standing seam panel easily.

@alexcloutier5752 Жыл бұрын

@@martinsanders4087 yes i have one as well but not sure i can do a 3/8" tall J-trim with it? :s theres not enough clearance between the nailing flange and the top flange side

@JustinCrediblename 11 ай бұрын

@@martinsanders4087 Can you make the female leg of the standing seam panel 1" height 1/2" top & 1/2" folding leg? and it'll work with standard stainless slider clips? I tried to build my own version of the Perfect Bender but I was having a lot of trouble keeping the rollers perfectly placed on my .060" 3003h14 aluminum coil

@aluminumtrim 5 ай бұрын

Link to cutting tool please

@innovatoolsinc 5 ай бұрын

Good morning Brian, directly on our website; www.innovatools.ca