Very well explained, i was able to finish bleeding my cooling system on my GSR EG civic, Thanks Bro!

Thanks a lot, I had idle issues for months after replacing a radiator on a DA, it helped a lot since the FITV never got hot enough to fully close which also made the car run rich and give bad mpg's, this is a VERY important vid, good job.

this has to be one of my most favorite channels. You guys are awesome!!

The no spill funnel cuts off the overflow. This is crucial to properly filling your system.

No car experience but made it happen thanks to this video on my 09 civic lx 4d

I wanna say thank you man, great vid!! For someone who is not a car guy this was perfect, and I will be coming back to brush up on any other questions I may have 😌👌🏼

After watching this video,Yesterday I bleed the cooling system of my Civic 2002 with the same method. Good informative video ☺️

love the videos man keep em coming!

Very good video. Your engine and transmission looks so clean. Thank u. I had to bleed my coolant system. My radiator was replaced and my gauge was fluctuating. Also when the fan came on one side of the radiator was cold the other side was hot. I had to bleed it twice good to go. I did it the same way you showed on video. Thanks.

Thanks for this video. Extremely helpful and to the point 🤝

Already know how to bleed coolant. Just stoped by cuz i love your channel

Thanks for the video man. Good stuff as always.

Great video i just did 05 Honda civic, 1 hr bleed air out.thanks HSG

The intro already got my like for the entire video...LMAO "Dat heat!"

Tanks alot im from Québec its was Nice to listen and understand your vidéo tank you so much

Step by step. Love it. Thanks much!! Bleeding my 97 civic rpms rise when in between gear shifts after idling for a while. Let's see if this is it.

love the integra man!!

I am liking the cover of "Put Your Hands Where My Eyes Can See".

I enjoy your channel a lot man being a technician, I'm glad your out there helping the diy people. 👌

Thanks. Worked perfectly!

A no spill funnel would be really handy.

awesome! just easy and straight to the poinr

good info man. really simple but only if you know how

Great video

My temp gauge has been going crazy, going to do this rn.

The radiator fan doesn’t turn on when the car is at operating temperature?

This helped so much lol

fucking mark always delivering as usual.... HSG FOR LIFE!!!! best KZfaq channel I'll watch till I die.... keep them coming mark... don't stop!!!! 😀

Great direction. Simple and should be effective. I haven't bled the engine coolant yet. But I'm noticing that the motor (B18C) temp passes the halfway mark on the cluster gauge and the fan don't turn on (after 20 minutes on idle). Upper hose is HOT and bottom hose is still COLD. I recently did a swap (D16 to '97 B18C ITR on my 89 Honda Civic hatch Si). We installed new thermostat (dealer), aftermarket water pump, ECT sending unit, fan switch, radiator w/ cooling fan, and hoses. I don't know why the thermostat appears to be not opening. Got any ideas? Thanks.

can you please also make a " how to bleed your brake system" video!?

Love the vids man. If you guys ever find yourself going to Northern California I'd love to meet you. I'm just a fellow Honda enthusiast wanting more Honda friends 😂

Eric the car guy??

very nice thank you!!!

That was a very informative video man. You got straight to the point explained everything that needed to be explained but didn't make the video so long that people lose interest. Again, great work man. Nice Integra by the way.

Thanks for the video but I have a problem I don't have a heater since the owner I bought it from took out the heater hose. Will it still be hard to bleed the coolant if I don't have the heater hose

AWESOME VIDEO AS ALWAYS BASSHEAD!!! 2000 HONDA CIVIC EX/Si, Clone

I love his content, very detailed and almost impossible to mess up lol

if your planning to delete the abs on your Gsr can you do a video on that

Hey quick question and I hope you guy's can answer this. I have a 2000 Honda civic coupe and it has a d16y7 and it's making a ticking noise I believe it's not a rod knock or anything like that. I've had read that it's the valves loose or the timing belt being loose. But I can't pin point the problem.

wow really a bleed coolant video i watch this channel cause it usually dont have bullsh*t videos

Shoulda changed the channel name to H and A Street Garage for Honda & Acura. "Welcome to Handa Streeet Garage." LOL

"Build an S2000 and the subs will come!!!!"

I tried this for multiple cycles ~ 30 minutes on a '94 3.8L V6 Mustang. No heat would come out of the vents when I tested them, still having overheating issues, should I just keep going? How will I know to stop if I dont have a bleeder valve?

I did this yesterday on an em1 i bought last week. It's so cold up here in canada so I gave up after the the radiator fan cycled once. I let it run for some time after that with no bubbles coming out of the radiator. should I do this again and make sure the fan cycles twice?

I saw you topped off before you reved and the fan turn on, did you squeeze the bottom hose?

Ooo that sweet coolant smell..

can you tell me what upper and lower radiator hose I need for a b20b swapped EK will a B16 set work and then just trim to work

will this somewhat work if I just replaced my radiator. meaning like should I follow these same steps to get the air out of the system ?

Hype hype

Do you need to drain the old coolant first.

On my civic si 2000 my heat isn't working that good well it doesn't work . What should I do I bled it change t stat . What else is there to do ? Heater core is not clogged both heater hoses are hot but no hot air

Hi, need some advice i got d16a engine now the problem is what ecu i should use for it. Its a vtec. Also can u tell me the vtec and non vtec ecu numbers

I don't do social media lol. can you do a vid for a after market fuel rail instal?

Do I necessarily need to turn on the heat in the car or no?

get yourself a "spill free funnel" its specifically made for bleeding coolant.

Good straight ahead video. But if you're not gonna use a no-spill set up or a pan underneath, please make sure you at least dilute whatever spills onto the ground. Coolant smells sweet to animals and they will drink it if it's puddled up and it is extremely toxic to them. Peace.

i use to have a 94 teggy with a GSR swap......i always wondered why the temp guages on teggy's never reach the middle...its always short of the mid point.......normal for Tegs?

do you by chance know of a company that I can get just the rod caps? or is that I can only get them from buying new rods?

where is hsg located? if ever need some work or swap u guys seem legit lol, im in nc

I have honda civic 2000 just replaced radiator and why the fluid going to radiator tank?

Got a f22b accord when u crack bleeder niple to let air out water shoots out rad is that normal

Well i cahnged my radiator and totally forgot to bleed my coolant system...that explains my overheating...thanks for thehelp

where is the rest of the HSG crew?

is this the same wit the rsx k20a3

What if i have electric fans, wired up right on the positive terminal of the battery.

The front of the car is raised to encourage air to migrate to the highest point man; not to get it through the heat core. Good job though Bro!

Nice one mate helped me loads !!

Hey man what if my fans dont come on??! And my lower tube isnt warming up..... bad thermostat..?! Thanks for this! Subbd!

What if your heater doesnt work?

Hey bro, I'm doing this right now, but I'm not getting any heat coming out. It just keeps blowing cold air. I just replaced the thermostat yesterday as well. It's a 96 GSR B18C1.

How manny litters to fill it up

What if u dont have AC in your car

I have a question bro, my friend has an eg and when he turns his ac off, his rpm lowers... why, can you explain.. basically he has to keep his ac on

What happens if the fan doesn’t turn on ?

Why the level drops when thermostat opens

Why don't you get a spill free funnel, the easiest to bleed coolant. Holy shit coolant all over the place.

Hi , i have a no heat problem with my acura 2004 mdx . I've checked everything out too , the flow in the radiator is good and it doesn't overheat at all and i looked under the center column and the heating switch is moving from cold to hot too and i looked at the heater control valve under the hood and that's moving from cold to hot as well. Here's the thing the 2 hoses going to and from the heater core aren't getting any pressure and i do not know why. Can you help>?

Please post the steps in the comments 🙏

Will this process work on a d series??

due you recommend the b20 or b16 headgasket for a b16/b20 build?

heres a good cooling system conundrum that i've yet to figure out. ive got a ej7 coupe with a full k20z3 swap, kpro v4, k tuned billet thermostat housing and a full width csf aluminum radiator with a single 12" fan, no heater at all. when the car is left to sit and idle, it overheats, sometimes fast and other times more slowly. in my kpro ive got the fan set to come on at 185. when it comes on, the temp still continues to rise. when driving in normal traffic it gets to temp like normal, but if you start to get into it hard it begins to overcool badly. it'll drop from 185-190 to about 130 in the matter of a single pull, even when its summer time. anybody else ever had this issue or know of a solution? ive tried bleeding the coolant at least 4 times now and nothing seems to be helping.

really need to get a swap done fast... Hsg where can I get one shipped and ready to drop in?

Man, you don't have to shout out. just post they will come.

The coolant in my rad never went down so i didnt have to top it off at any point. Is that bad??

i should probably bleed my coolant..

what happened to the rest of the crew ? I'm just curious.. are yall like fighting or something or did yall just quit working on stuff together

What if you have to change the thermostat? And tryna change it to blue type anti?

Un-hook a heater hose and pour coolent in until it comes out said hose.... re-attach heater hose and finish filling the system. only way to properly "Burp" the cooling system and it doesn't take more than 5mins

What if I don’t have ac/heater tho haha

i have no ac n my fan is wired to always on

Quick question bro you havent thought about changing it over to blue coolant ??

Very lengthy and super scratchy title sound.

Would this apply to k-series as well?

I'm surprised how sloppy this was.

first !

3

Second

Gm, whats your username on Snapchat? Ive tried hondastreetgarage with no luck. Thanks

does anyone else hate the intro ?

He is not a mechanic .is a part changer,,.,. // noise valves no good work... and it have a fresh valve cover gasket.... Honda trash garage...!!!