Thanks Jared. Just setup my boys 2.1 shocks for Saturdays race.

Use to run no rebound and emulsion until I saw your NB48 2.1 build. Gave your setup a try on rough and loose track…my car feels soooo good and lively. Thanks Jared. Keep pumping out the content

Awesome, great explanations. Thank you!

what do you use for nt set up as far as building them

Glad to know that im on the same page..thanks for video.

Shocks and work a lot better if they were at least a 1.5 mm larger in the shock bodies could be a little bit larger 6 to 700 weight oil and test different springs. Would definitely benefit from a larger shock shaft diameter in a larger diameter shock body would be good for 8th scale

Truggies work a little bit better in 8 scales shocks have gotten a little bit bigger over the last decade but there's still too small they still need to be bigger with bigger Pistons and taller to accommodate the way tracks are built in Europe and the US the shocks just don't cut it

I don't know why 8th scale shocks are designed the way they are. The bladder needs to be deleted with a seal oring seal in the cap. No blader, with a bleed screw and set them emulsion, no rebound, no bladder no rebound, dead would be better

8 scale buggy and 8 scale truggy shocks how to detect none of them are any good. There's not enough pack and too much rebound the cars jump okay but they don't land well at all. They don't even jump all that great are they fly into the air because of the speed they carry but don't jump well and landing on the downside is even worse. The shocks suck