Didn't know if bleeding brakes from my truck would translate to quad super helpful for those who don't know how to bleed. Well put.
@eaclest3 күн бұрын
Zillaman you are the daddy :) Thank you
@timlewis59372 жыл бұрын
My apologies! Let me correct my original statement. The front brakes bleed as they normally would successfully. It's the back brakes that do not bleed as per statement below. Thanks.
@atver1175 жыл бұрын
Thanks for the help!
@erikthered36014 жыл бұрын
What about the back?
@MontanerMusic2 ай бұрын
Foot brake is doing not much. Cannot find anything on this. Help?
@user-nk8ml3tt3h Жыл бұрын
Having trouble bleeding my brakes on a 2012 Grizzly 700 , for some reason I just can't get them to get any pressure ? I'm referring to the rear brakes that is .
@darrell536310 ай бұрын
same on my 16
@markland845 Жыл бұрын
After installing a completely new caliper and new brake pads for the front left and right. As well as replacing the rear pads. Now I can’t move my 08 grizzly 660 when it’s in neutral. What might I have done wrong?
@timlewis59372 жыл бұрын
I've seen and I am experiencing the same issue that Robert and Nathan mentioned below. The brakes bleed as per normal and work well, but the back brakes do not seem to bleed properly and remain soft, if not immediately they definitely soften over a long ride. I've searched and seen lots of forums on this with the 700 Grizzly's. Any tricks to correct this, or typical system parts that are diagnosed as the problem? Thanks in advance!
@darrell536310 ай бұрын
trying to figure this out on my 16 grizzly the brake pedal easily touches the grip and i slowly stop, should lock up the wheels
@stelthcamo3577 ай бұрын
I have to pump my brake handle 5 or 6 times then my brakes come back then the next day it will randomly do it again ill pump it 5 or 6 times then I have brakes again any idea to what is causing my brakes to randomly stop working
@hrdman2luv3 жыл бұрын
I normally work on mowers, but am taking in a few ATV's. This Yamaha I just took in for a carburetor replacement, and now a rear brake job. The location of the vin number (left front frame, in fenderwell) has rubbed so much there's no ID left. Is there another way to ID this mower? Customer says it's a 2012.
@troyduprey5336Ай бұрын
What about the rear brakes?
@josephbaloun10354 жыл бұрын
yeah, it does have two, left one for a rear brake..
@norbertbenoit-nl9te4 ай бұрын
What about the rear brake?
@robertreighard61023 жыл бұрын
I’m having problems with my rear brakes where they barley grab
@nathansimpson54983 жыл бұрын
Same here did you figure out the problem? I’ve bled mine completely and nothing changed
@darrell536310 ай бұрын
@@nathansimpson5498 same
@timlewis593710 ай бұрын
@@darrell5363 Same here. IDK what's with these 700 Grizzly rear brake systems. Very difficult to set up once maintenance is completed. Mine still get soft over a day of riding and aren't great when cool either. Any hints or corrective actions would be greatly appreciated.
@darrellmcquay980810 ай бұрын
@@timlewis5937my brake lever touches the handle grips and I slowly roll to a stop
@darrellmcquay980810 ай бұрын
My 1999 yamaha kodiak locks up all 4 tires so I know theirs def a issue here
@soleslayer914 жыл бұрын
Is there a different master cylinder for the rear brakes?
@PartzillaParts4 жыл бұрын
Yes.
@aaronpeck42242 жыл бұрын
Yes it’s on a grizzly 660 by the front right tire down low. In fact I think it’s lower then the rear caliper making it more difficult to bleed
@jeffscheurich36013 жыл бұрын
Pressed the rear brake down while the caliper was off the rotor. Is bleeding the brakes the only way to get them back open?
@christopherbassit27572 жыл бұрын
You need to push the piston back into the caliper. Use a vise clamp
@connersnow2982 жыл бұрын
Awesome video
@josephbaloun10354 жыл бұрын
doesn't yama have two brake fluid reservoirs...? you did not mentioned which you are using or maybe one on each side....little more details would be great...
@curth36714 жыл бұрын
There are two reservoirs. One for front brakes and one for rear. Right side is for front and left side is for rear.
@andrewnormore70932 жыл бұрын
Thank you
@henrydevelle62814 жыл бұрын
What size hose is he using
@PartzillaParts4 жыл бұрын
1/4" inner diameter
@Ceilliau3 жыл бұрын
Thanks super helpful!
@ohmelon9434 жыл бұрын
My brake completely exploded into a million pieces
@JacobLambeCarGuy Жыл бұрын
One important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?