How to BLEND GUITAR SPEAKERS for unique tones!

Рет қаралды 27,261

3 жыл бұрын

Get the course here: ➡️bit.ly/2PgBleb
Get the "Rainbows & Chainsaws" IR pack here: ➡️bit.ly/3aObS3A
Get Kristian Kohle's EMINENCE IR pack: ➡️bit.ly/3txw6VK
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The ultimate Guitar Tone Finding course by German producer Kristian Kohle (Aborted, Powerwolf, Eskimo Callboy, Hämatom, Van Canto).
➡️More than 3h of information about crushing high gain guitar tones!
➡️Additionally you'll get the multitracks of three songs from three different genres (Modern Metal, Death Metal, Vintage Rock) to create YOUR guitar tones!
With this course, Kristian lets you in on his secrets and shows you his entire process of finding and creating new tones. You’ll learn how to design your own professional, signature sound from scratch, using the gear you already own.
Pick up this course today and achieve a new level of power and excitement in your music!
--------------Gear used in this video!--------------------------------------------------------------------------------------------------------
Some of the following links are affiliate links. I get a commission if you buy something after clicking on the links. This in one way for you to support this channel.
sE Electronics VR1 Voodoo: ➡️bit.ly/2RrfAJs
Rode NTR: ➡️bit.ly/3vNT4cI
NoHype LRM-2b: ➡️www.nohypeaudio.com/nhaproduc...
------------------DISCOUNT CODES:-----------------------------------------------------------------------------------------------------------
Use Code "ULTIMATEKOHLE" for 20% at the JPTR pedals shop!
➡️www.jptrfx.com/
Use "SATANICBEERLORD" for 15% off on JENS BOGREN's IR packs! Or just click:
➡️bogrendigital.com/?ref=SATANI...
-------------------------SOCIALS:-------------------------------------------------------------------------------------------------------------------
Subscribe to my email list:
➡️mailchi.mp/0cb34f9ecfda/krist...
Make sure to follow me on Facebook and Instagram:
➡️ / kohlekellerstudio
➡️ / kohlekellerstudio

Пікірлер: 225

@KohleAudioKult 3 жыл бұрын

What's your favorite speaker / IR combination? Let me know!

@gaukarmadhouse 3 жыл бұрын

V30s and K100s blended together are pretty mighty!

@Asgaia 3 жыл бұрын

It really depends on the guitar. My BC Baritone sounds different than the guitar of our guitarist. But for rhythm V30, V30(friedman style) + G12M. for melody jensen ts + G12M but there's a lot to check, too. Eminence has now a DV77 in 16 Ohm and I am the first who ordered it at big T. And regarding IR. I use my 720nm-IR filter when filming IR with my BMPCC ... ;-)

@KohleAudioKult 3 жыл бұрын

@@gaukarmadhouse Oh yes indeed. The Swamp Thang is the better K100 if you ask me though!

@KohleAudioKult 3 жыл бұрын

@@Asgaia What kind of filter is that? And which Jensen is the TS?

@miserypath 3 жыл бұрын

At the moment I'm using your DV77 fat IR. In about a week I will mic my cabinet again and experiment with tones a little more.

@Producelikeapro 3 жыл бұрын

Absolutely fantastic video! You Rock Kristian!

@CrushingAxes 3 жыл бұрын

Man this Death metal tone is so awesome!

@KohleAudioKult 3 жыл бұрын

check out the course if you haven't. It includes the DIs, the reamped signals (with and without a cab). Makes it quite easy to "understand" the tone.

@retodd13 3 жыл бұрын

Bruh you are so on point on all your videos. The community is really lucky to have you creating content thanks brother 🤘

@matt926uk1 3 жыл бұрын

I'm obsessed with guitar speakers so I really enjoy your channel

@KohleAudioKult 3 жыл бұрын

The right channel for speaker perverts! Haha!

@nitraus666 3 жыл бұрын

As a thumb rule, I use darker mics on darker speakers/positions and more present mics on trebly speakers/positions. This way your microphone faders become more like the bands of an eq.

@Wormed101 3 жыл бұрын

You deserve so many more subscribers.

@KohleAudioKult 3 жыл бұрын

Thanks! Share the videos. Spread the word! ❤️🍺

@haydenbrown353 3 жыл бұрын

It's a great day when Kohle releases a video on speakers and mics! Both your IR packs I have loaded into my helix and all of them sound incredible. I'm not a huge metal player, even though I listen to plenty of metal, I play along the lines of hard rock and the IR pack fits right in!

@KohleAudioKult 3 жыл бұрын

Thanks man! ❤️🍺 Especially the Rainbow IRs and the Eminence pack should work great for anything rock!

@allboutthemojo 3 жыл бұрын

@@KohleAudioKult kind of an unrelated question but since you do a lot of studio work I thought I'd ask. What kind of chair or stool do you recommend for playing at home or studio ? Something that keeps you comfortable for hours. I haven't found a good seat yet and the back restricts how long I can play

@johnwardle9667 3 жыл бұрын

I actually love the Kohle stock metal riff. It's the ultimate vessel for chug demonstrations... The balance between slow chugs and alternate picking. Love it. 👌

@TheGarageRecordingSC 3 жыл бұрын

Brother, I love your videos!!! You explain your process in a way that is so easy to understand. So many people make videos and they try to over complicate things and they leave you with more questions than you had at the beginning. Thanks so much for sharing your knowledge!! 🤜🏻🤛🏻

@comand0Metalero1 3 жыл бұрын

Hey Kohle just got your course and it's amazing so far!! I'm taking the time to analyze my gear and describe it, thanks for the info!

@Scorpio04 3 жыл бұрын

The Course is awesome ...so much Information, Entertainment and great Guitar-Tonecrafting for such little Money! 🖤🤘

@king-korestudio6311 3 жыл бұрын

Love these speaker vids!! You the man 🤘😈🤘

@PraiseTheSaw 3 жыл бұрын

Well that was an incredibly helpful video. Thank you very much!

@smaturock 3 жыл бұрын

Just pulled the trigger on the purchase button for the course!

@ZsoltSapi1 3 жыл бұрын

After trying literally thousands of IR's and checking the best ones in the rehearsal room with my band I ended up using only an M160 on a Diezel cab loaded with V30's. So I'm glad to hear that sometimes you use that mic alone. I really did want to use an SM57 in some way, but with that mic the highs became painfully scratchy at really high volumes and I wanted to sound good at shows, not in my room. With the M160, the highs came up in perfect balance and I got an enjoyable, creamy sound. If I had to use a real cab I would get a 2x12 Mesa cab and swap one of the speakers to a Swamp Thang. I've decided this long ago, based on one of your videos. Loved the V30 + Swamp Thang combo.

@neilmcnasty 2 ай бұрын

It can't get much clearer than this! Guitar recording demystified! Also extremely useful for non-metal heads! Applies to all styles of music! Not just metal!

@KohleAudioKult 2 ай бұрын

Great to hear that. Thanks!

@munster442 2 жыл бұрын

Thank you for the awesome video! Appreciate it Bigtime. Learned a ton dude.

@samizdat113 2 жыл бұрын

I run British V30's with Greenbacks in an X pattern in my 1960 Marshall. So good.

@adamstrachn 3 жыл бұрын

This was super informative & easy to translate into a 'tone workflow'.

@AlexeySolovievMusic 3 жыл бұрын

Amazing video! Thank you so much Kristian! Thanks to you and your awesome course I’ll learn how to creat bruuuuutal tones! You Rock my friend! 😀👍🔥🔥🔥

@KohleAudioKult 3 жыл бұрын

Your video is up next!

@AlexeySolovievMusic 3 жыл бұрын

@@KohleAudioKult Thank you so much Kristian! Much appreciated!

@jasonzdora 3 жыл бұрын

My friend Josh from Cattle Decap said you make his favorite guitar tones. Its obvious to see why. Such a great technique and understanding!

@KohleAudioKult 3 жыл бұрын

Haha! Thanks. Say hello!

@hwy2hell161 2 жыл бұрын

Yes!! My DV-77 just came in today, combining it with a Mesa Black Shadow BC90 speaker in my 2x12 Genz Benz G-flex cab , sound huge! Thanks for the reviews, the DV-77 is everything that you said it would be 🤘👍

@KohleAudioKult 2 жыл бұрын

Great to hear that!

@felixdorn21 Жыл бұрын

Hey Kristian, danke für das Video. Hab mir deinen Kurs auch gegönnt. Super anwendbar für die Praxis. :) Grüsse aus dem schweizer Untergrund🤘

@antonycharest4719 3 жыл бұрын

amazing as always

@75stephengreen 3 жыл бұрын

Great stuff as per usual. Thanks for highlighting more guitar recording options and breaking away from the V30. As good as the V30 is, it can become a bit redundant.

@androidgameplays4every13 Жыл бұрын

I've learned a lot in few minutes, thank you.

@MaDmAzAy 2 жыл бұрын

Thanks you for this cool material! You are my mentor! Befor i find your chennal i thought i know a lot of saund that i would to use, but you change my world)

@KohleAudioKult 2 жыл бұрын

Welcome!

@mvyper 3 жыл бұрын

I blended the Mesa cab from Own Hammer's Heavy Hitters using a 57 on a Creamback, a 161 on a V30, and a blend of a rear and 2 rooms. It sounds awesome, and it's my go to IR of choice.

@KohleAudioKult 3 жыл бұрын

That’s the spirit!

@russpenn27 3 жыл бұрын

Thanks, Kristian, you have some of the best Impulse response packs I have ever heard, not to mention your KZfaq presentations are mint. Thank you so much mate. Hello from South Australia. \m/

@KohleAudioKult 3 жыл бұрын

Thanks a lot man! Spread the word!

@russpenn27 3 жыл бұрын

Already have :)

@officialkaifeck 3 жыл бұрын

We'll definitely work with these techniques on our second album!

@sleepwait9613 3 жыл бұрын

The Krusty Kohle ir sounds amazing! And is very versatile too, i tried it with different amp sims and it always sounds 👍

@KohleAudioKult 3 жыл бұрын

Wait till you try the other ones!

@derived-doom 3 жыл бұрын

My favorite speaker / IR combination? Engl e110 with the mic combination E609/MD421. Sounds boxy in the room, but the mic signal fits perfect into a mix. I created my DIY IR of this, so it is man's cave compatible...

@fabianthio4011 3 жыл бұрын

Very informative video!

@cristi.trohin 3 жыл бұрын

Dude, I got your DV-77 IR pack and I just wanted to say, thanks! Thanks a lot! Not only am I getting a much warmer and clearer tone, but I've learned a lot. I own a GE200 (I know, not professional tools and amps, but I'm a bedroom guitar player). I've tried using the onboard cabs of the GE200, but they're a mess, so I decided to start playing with IRs. I got some Ownhammer IRs that got me close to what I wanted sound-wise, but somehow, on all the cab IRs I tried, I had to do some drastic EQ cuts and boosts. The first IR I loaded from your pack was the DV-77 linear. It didn't sound right... I thought I was in for disappointment again... Then I realized the EQ I had from the GE200 patch was still on, so I turned it off. Lo and behold!! The tone came alive! Not just that, but I didn't even have to tweak the amp sim. No more muddy tone, everything crisp and clear. I actually realized that the EVH 5150 amp sim sounds sooo different than the dual rectifier sim, thing that I didn't realize when using the other IRs. I understood what you meant when you said the DV-77 is a transparent speaker. I don't know what kind of magic you did with these IRs, but I don't need any post EQ in my daw when using the DV-77 IR. I tried it now with two guitars, one with a SD Nazgul in the bridge tuned to E standard, and one with a SD JB in the bridge tuned to D standard. Both sounded amazing on the same patch, with no tweaks specific for each guitar(which I had to do before)! I also realized that the EVH amp sim sounds a lot more marshally than I thought it was :) In short, best 50$ I've ever spent, worth every penny (and I only loaded the FIRST IR).

@KohleAudioKult 3 жыл бұрын

What a great story! Makes me happy! Enjoy exploring the other IRs! ❤️🍺

@PaddyMacNabh 4 ай бұрын

I think you have the funniest way to share real knowledge about recording guitars :)

@KohleAudioKult 4 ай бұрын

Aren't we Germans famous for our humor? Haha!

@greevar 3 жыл бұрын

I blended a Vox VT20X modeling a Marshall on the right and an Orange Crush 20 on the left with a tc electronic Mimiq Doubler between them. It's the live sound I've been looking for.

@Ben-cb3lu Жыл бұрын

I would love to hear a demo with a Mesa oversized/standard with dm77's loaded in the bottom and wgs reaper hp loaded in the top. Also, the difference between a different rear loaded smaller 412 with insulation vs a Mesa 412 with no insulation. Love your videos! Keep them coming and continue to shred!!!

@Jupiter2ignite 3 жыл бұрын

Nice None so vile shirt. The best cryptopsy album imho

@norbertrenner9181 2 жыл бұрын

The DV-77 in combination with the V30 sounds perfect!

@nickevanz79 3 жыл бұрын

Great video!

@riffnastyhubanks5714 3 жыл бұрын

I haven't heard you play that one riff that you play at 1:25 in a while brother lol love that brutal shit and all the knowledge you provide for us all thank you and cheers from TXDM and me

@KohleAudioKult 3 жыл бұрын

Thanks man! That riff is originally a part of the presentation of my Grindstein pedal. This: kzfaq.info/get/bejne/nr9gpMugys6xnXk.html

@muncham 3 жыл бұрын

High quality content dude

@Dan-O-mite 3 жыл бұрын

Great channel as always. I don't record my playing but I really enjoy your speaker comparisons and learning about capturing guitar tone. Eminence are by far my favorite speakers. My combo right now is a governor and a cannabis rex. One I haven't tried is the swamp thang. What's your favorite eminence alone or in combination? Cheers

@thiagonogueira9363 3 жыл бұрын

U rock man! 🤘🏼

@emobutpoofy Жыл бұрын

The part about keeping things straight on explains why I’m not a huge fan of the Fredman technique. It’s all fizz because you’re essentially adding more presence to an already present sound.

@deicidalmaniac Жыл бұрын

The infamous Celestion T75's actually sound awesome.. When blended with V30's

@bimmerman5978 Жыл бұрын

Awesome thick broken bulldozer sounds!!!

@andrewmallison3524 3 жыл бұрын

Another great video! I've just been given with an oversized Blackstar S1-412 Pro A Cabinet by a band I've just helped with some pre-production, what are your thorts on the cab?

@francescocapone7966 3 жыл бұрын

The course is really really good! Hope for something about drums or bass now

@KohleAudioKult 3 жыл бұрын

In the works already! Just like a complete Academy. The Kohle Audio Kult ❤️🍺🌭👹

@RenanBEreanSound 3 жыл бұрын

Yeah bro, i'm also stunned by that drums and bass in the course. Its just another thing that we must study

@KohleAudioKult 3 жыл бұрын

Absolutely!

@scallionboy8679 3 жыл бұрын

I have been using the death metal recto DI tracks in the session for tone matching. There's currently 15ish amp Sims in the chain using the same virtual cabinet and level matched to switch between them. To hear their character eq them in the 'amp' so to learn how to best apply them. Your matrix is great idea for consistency. Great course, i even made an homage to the grindstein by some thoughtful fx routing to split the signal and blend In the channel as i don't own one. But i got pretty close to the sound of one using audiority hm2 and ignite amps PRO FET distortion.

@KohleAudioKult 3 жыл бұрын

Awesome! I see you#re learning and having fun. The Audiority HM2 is great btw! Also try to do the same thing with the modern metal DIs. The amps will react differently because the tuning is not that extremely low like in the DM example.

@scallionboy8679 3 жыл бұрын

@@KohleAudioKult i am just about to open up the daw for bit of a 'wind down'. I shall go back into that one like and play with it as you suggest to really listen and hear the differences. Yes having fun whilst learning and being creative!

@Davidthestratman7 3 жыл бұрын

Good video dude

@getawayperformance 3 жыл бұрын

please try out the Scremin Eagle. i cant wait to try the swamp thang.

@KohleAudioKult 3 жыл бұрын

What's that? Guess I need to google.

@RenanBEreanSound 3 жыл бұрын

Just finished the course yesterday. It is amazing!!! Kohle, could you please make a content or give some advice about loudness sweet spot of speakers? Its like, I understood that for tight metal the power amp adds unpleasant clipping/saturation. But the speakers also behaves unpleasantly after cranking too much them. It'd be huge help if you give a light in this topic In my case I got a little evh 5150 15w, with 2x12 v30's. The speakers behaves good between Master Vol 1 and 2 (9 o'clock maximum), after that just adds boomy.

@KohleAudioKult 3 жыл бұрын

I feel like you should just go to the point where the amp „comes to life“. That way you never drove even a 1x12“ too hard

@harryanderson7282 3 жыл бұрын

Would really like to hear some Laney cabs sometime too.

@KohleAudioKult 3 жыл бұрын

Me too! ❤️

@sebastianneusius9498 3 жыл бұрын

Love your stuff man! Guitars always sound Killer and im so looking forward to your academy! Already have your guitar course and your IR’s and I‘m on fire for the drum course! Best IR‘s ever and I tried more than a couple other packs. So far the only other IR‘s i liked are from ML Soundlab. Have you ever tried his Mikko Plugin? I think it is fun to move the mics in real time. I think a collab DV-77 Pack would be f... awseome. Grüße aus Freiburg ;)

@KohleAudioKult 3 жыл бұрын

I haven’t tried the Mikko stuff. He did the Omega IRs which sound ok. But his cabinet plugins look nice!

@sebastianneusius9498 3 жыл бұрын

Thanks :) and I forgot I would also love a course on recording and mixing heavy vocals! As soon as I put the vocals in my mixes they just don‘t work anymore. (Maybe because I suck at singing xD)

@uncletom-e4461 3 жыл бұрын

Truthfully, I derive any sound I'm looking for using a homebuilt 2x12 cab sporting a Fane 65 and a Fane 75 speakers. Cab is wired dual single (either) or series, parallel, or series parallel with switches on rear. I mic it with a Cloud 44-A... Edit : Amp is a Hughes & Kettner GrandMeister Deluxe 40, not to mention a 14-space rack of processors (Axe F/X, dBx compressor,Tascam EQ, BBE, etc...)

@wealthaddict Жыл бұрын

Can you make a video about blending speakers and how you did the phase and delaying a mic...but using reaper to do it? I am a noob when it comes to recording and I would love to learn how to blend my mics/speakers to get a heavier tone out of my guitar tracks. please and thank you. BTW I love your videos, and appreciate how much knowledge you share with us.

@KohleAudioKult Жыл бұрын

It's all about understanding phase, delay and volume. It has nothing to do with the DAW. There are two courses in my academy showing you how I do this! Join the Kult: www.kohleaudiokult.com

@DonnieFreymoyer 3 жыл бұрын

My cool cab has a blackbird a c12k and 2 English g12k

@johnchaney5632 2 жыл бұрын

Killer video and tones! Can this sample delay used for the phase correction be done in Cubase?

@KohleAudioKult 2 жыл бұрын

You need a very fine delay. Samples, not milliseconds!

@Dogmatikos 3 жыл бұрын

Great video, consider to blend now preamps vs power amps for a heavy death metal tone, ss to tube vs modeling to tube vs tube to tube vs tube to ss...

@KohleAudioKult 3 жыл бұрын

I have done the tube vs solid state thing already. Check out my guitar playlist

@Jodelautomat01 3 жыл бұрын

Was wär die Welt ohne Kohle ;) Thx

@KohleAudioKult 3 жыл бұрын

Pleite, hahaaaaa!

@mauricesanguinette8178 3 жыл бұрын

Cojones, everbody want that in their guitar tone! "Cojones" maybe a cool name for an IR or your next IR-Pack..... haha :-P 100 watt razorblade -Kohle chainsaw bliss-bulldozer death and so raw yet well done are my favorites so far, cheers! ;-)

@KohleAudioKult 3 жыл бұрын

Noted! Definitely sounds like my typical IR language. Haha!

@Fartinhalerr Жыл бұрын

How about mixing blended speakers?

@philz600 3 жыл бұрын

This great and cool to know the basics. now i would love to know hot to get a "decent" sound out of my harley benton 2x12 (not the v30-Version and my 1x12 ornage (v30). i know, i should get different cabs or at least exchnage the speakers, but lets just pretend i need or want to work with what i got cause i just wanna play around and record demos or just see how far i can get, cause its Corona-Time and i got spare time to get in to homerecording. :)

@KohleAudioKult 3 жыл бұрын

If the speakers duck, there’s not much you can do. Which speakers are in your HB cab?

@wesleygalles 3 жыл бұрын

I'd love to see your opinion on Mikko by ML Sound Lab. It just seems to be one of the most in depth IR creation tools.

@KohleAudioKult 3 жыл бұрын

I haven’t tried the Mikko stuff. He did the Omega IRs which sound ok. But his cabinet plugins look nice!

@Asgaia 3 жыл бұрын

Hi, I have two questions. Question1 : what do you think about different settings for left and right)? For instance Amp1/Mic1 + Amp2/Mic2 on the left and Amp1/Mic2 + Amp2/Mic1 on the right side. Instead of amp and mic you can also use speaker+mic combination. You get the point. Or - what I liked to use more than 10 years ago - find a good sound with a mic or mic-combination on one (e.g. the left) guitar speaker (in most cases a 57 and V30) and then hook up the same setting but mirrored on the right speaker. (easy in case of one sm57 and a cab with 4xV30). So you get the same sound for the right side. But not exactly due to slightly different speakers, not excatly to the µm exact mic placement. This can widen the stereo effect. And for the other two guitars you flip the sides. Question 2: I often see people in the studio - I think you, too - micing also the lower speakers. In my (less compared to your) experience the upper speakers sound better. And if you want to use the lower speakers put the cabinet higher. E.g. on beer crates. Because of the strong reflections from the floor. 50cm delay cancels out frequencies of 1m wavelength, 300Hz. So you get compfiltering in the lower mids. Did you noticed that, too? Does it really matter? It's only imagination?

@KohleAudioKult 3 жыл бұрын

I only do that if I want both guitarists to have a distinct tone. I have also done mixes with a slightly different sound left and right, but that never really did anything for me. Here's an example: kzfaq.info/get/bejne/mL9nl82p1JzQqmQ.html

@Asgaia 3 жыл бұрын

@@KohleAudioKult a big disadvantage is also that you cannot fly say verse 1 from guitar 2 to the fucked up verse 2 of guitar 1.

@gastonjabaly 2 жыл бұрын

can you do that sample align to match the phase on cubase?

@TybekGrindCore 2 жыл бұрын

Recently I think about speakers changing in my 1960 cab with 4x g12t75. What will be better: 2x v30 (China) with 2x g12t75 or 2x Eminence v128/ gb128 with 2xg12t75 ? I use marshall slx amp.

@kazabubu10 3 жыл бұрын

Wunderbar vid man...:P...Please try a Celestion G-12H-80 ("Wolverine")...I have a couple of those and although to my ears they sound pretty good, they are totally overlooked. If you could give them a try and compare them to more "mainstream" speakers like the V30 etc. would be great!!...:)...Keep up the good work!!

@KohleAudioKult 3 жыл бұрын

I'll have a look. But check out this channel. I'm pretty much known for showing a lot of speakers instead of just the usual V30 thingy.

@kazabubu10 3 жыл бұрын

@@KohleAudioKult thanks for the reply!! I am familiar with your channel..I have watched most of your videos and I have learned a lot about tone shaping!! Thats why I thought to ask you :) I only mentioned the V30 as an example!!...:)

@JoshBeachel 3 жыл бұрын

Hey Kristian that riff you always play / use. It's in the beginning of this video @ 1:25. Is it from a song of yours? If it's not a song it should be. It's a brutal riff... Awesome video as always.

@KohleAudioKult 3 жыл бұрын

It’s from the Death Metsl song of this course. Originally it was the presentation video of the Grindstein pedal. This: kzfaq.info/get/bejne/nr9gpMugys6xnXk.html

@Eastlight3D 2 жыл бұрын

I have a question that might be a bit dumb, but I ask it anyway. I have a 4x12 marshall cab and I have 4 16ohm celestials in it. However I want to replace 2 of them with vintage 30 speakers 8 ohm. Is the difference between the 8 and 16 ohm gonna be a problem using 1 speaker input?

@paolodibernardo9085 3 жыл бұрын

Super cool stuff from your channel, love it! I have a question: how much does a certain mic pre affects the sound, talking about screaming hi gain tones? There are a lot of harmonics and overtones (I hope to use the correct words) in a distorted sound, can you hear a huge difference using a Neve instead of an Api or an Ssl with the same microphone? Thanks for sharing your knowledge!

@KohleAudioKult 3 жыл бұрын

Funny! 10 minutes ago I was thinking about doing a mic pre video. It’s a long story. I’m afraid you have to wait for that video to get a good answer! Sorry!

@paolodibernardo9085 3 жыл бұрын

@@KohleAudioKult I can read your mind! Cool, I'm waiting for this new video, beers are ready in the fridge!

@Grotsnik1992 3 жыл бұрын

Hallo Kohle. Wie summiert du die verschiedenen Mikrofon Signale? Nimmst du die Mikrofone separat auf und summierst in der DAW oder nimmst du das summierte Signal auf?

@Mikey__R 3 жыл бұрын

Kristian, how do you feel about using test tones for aligning different mics?

@KohleAudioKult 3 жыл бұрын

You can use noise, but it’s better with a guitar signal because you will be able to tell if the frequencies that will be canceled out are imports or not.

@sebastianbecker5023 2 жыл бұрын

Würde mich interessieren, wie du das mit dem verkabeln der speaker machst, wenn sie unterschiedliche ohm zahlen haben. Generell der Wechsel. Grundsätzlich: Deine Videos sind großartig! Bei keinen anderen Videos so viel gelernt wie bei dir. Tausend Dank dafür

@KohleAudioKult 2 жыл бұрын

Danke dir! Ich versuche eigentlich, immer 8 Ohm zu nehmen. Klingt wärmer und man hat keinen Anpassungsstress.

@fischersen_85 3 жыл бұрын

Hi Kristian, I really learned a lot from you regarding micing a guitar cab. During Lockdown I also created my own IRs and I realized that the quality only depends on the Mic Placement (Es steht und fällt mit der Platzierung der Mikrofone ;) ) I only have the problem that I do not have a seperate LiveRoom in my basement at home. Thus I cannot listen to the mic-placement on my Monitors (JBL305 MkII) but only on my headphones (DT770 Pro). Even this is a compromise. I have to play the amp quietly. There is sound-bleeding from the cabinet in the headphones. I came across the solution to place the mics while using headphones, record them, listen to the record via my monitors and re-place the mics if needed. This process consumes a lot of time. Your approach to flip the phase is a awesome Idea but hardly possible on headphones when there is bleeding from the Cabinet. Do you have an Idea how to deal with it in a better way? Cheers from Germany Christoph

@KohleAudioKult 3 жыл бұрын

Sounds stupid but: Get another room! At least for the soundcheck and the IR capture. Or maybe an isolation cab. I used to have one from Randall that sounded pretty damn good.

@lwaysonthego 2 жыл бұрын

Hi Kristian! I just want to know...your Fernandes guitar length, your string gauge and, Dropped down to "Bb" ( if I´m not mistaken)?! BTW...geile Riffs!

@alrecks619 Жыл бұрын

for modern metal stuff, can't really go wrong with V30s (friggin Nolly...) but if i want to gravitate towards 80s and 90s stuff i would blend it with T75s, G12-65, or even K100 and maybe swap the V30 with Eminence Governor or WGS Vet30. Been interested to buy a pack of DV77 or Hesu Demon IRs because they definitely sound more balanced than the good ol' V30.

@bjarnebjornschildkrot9619 3 жыл бұрын

Did you try bass speakers (like the jensen punch from your bass speaker video) with guitar?

@KohleAudioKult 3 жыл бұрын

Yes. mostly too bright sounding, but maybe worth a video

@chiefindisguise 3 жыл бұрын

Hey Kohle!, when your inverting and changing the phase, what are you mostly listening for? Is it the low end cancelation? Is it the change in mid to high fizz? Is it a drop in general volume?

@KohleAudioKult 3 жыл бұрын

The less you hear, the better! When you change the delaysettings, you can decide which frequencies you wanna get rid of. Sometimes there different possible settings. Whatever you hear with the phase switched, will later disappear!

@chiefindisguise 3 жыл бұрын

@@KohleAudioKult 🙏🏻💪🏻

@P4zur3k5 3 жыл бұрын

What do you think about recording these speakers separately? I mean play the same riff for each of them. I think, this way you can avoid phase issues, but will the sound not be blurry then?

@KohleAudioKult 3 жыл бұрын

You have tinplate very, very tight then.

@Marcink126 3 жыл бұрын

Technical question. Lets assume normal situation that musician is using 4 the same speakers in one cab. And sometimes at studio people are using more than one mic, for example one ribbon (for low end) and one dynamic (for brightness). Then they blend them. It always creates phasing problems, more noise, more cables and so on. So why not just use one mic and EQ? Especially almost always people are using some EQs.

@KohleAudioKult 3 жыл бұрын

Because the effect of blending is way more complex than EQ. Imagine 1000 bands. The way a proper blend fills up certain frequencies is very difficult to achieve with EQ.

@UrosRaskovski 2 жыл бұрын

hey man, you's is da shit. Fabulous content and info. QUESTION: how do you adjust samples in the input? Is that in the SSL console control mix, or something else? I use RME and Cubase. Do you have an alternative for sample delay adjustment before printing? I don't have this option in Total Mix (as far I know). Thanks Kris.

@KohleAudioKult 2 жыл бұрын

Hey! I’m using the SSL mixer of the MX4 card. This is kinda like Total Mix. But you can use any delay that works with samples and not milliseconds.

@michaelroy7156 2 жыл бұрын

What is the difference on a Eminence CV-75 vs CV-65 other than the wattage ? Thanks I'm planning to pair cv-65s with celestion g12t-75s . Would this be a ok mix ?

@KohleAudioKult 2 жыл бұрын

I haven’t tried the 65. I’m sure it sounds quite different though.

@toemasmeems 3 жыл бұрын

The channel is growing bois mufufufufufufufufu

@qfz2112 3 жыл бұрын

Question, if I don't have another ribbon, do you think an AKG D112 would work for the "super balls" sound?

@KohleAudioKult 3 жыл бұрын

You can try. Hard to tell. Those kick mics are very often less linear. But you won’t know before you have tried ❤️🍺🤪

@jordycarbonell1107 3 жыл бұрын

I know it may not be your thing but it would be awesome if you did a video like this but with a fuzz pedal, like for doom or stoner

@KohleAudioKult 3 жыл бұрын

But you’ve seen this, right? kzfaq.info/get/bejne/qt9jYLKL187GqGg.html

@jordycarbonell1107 3 жыл бұрын

@@KohleAudioKult i have not, will do, thanks man! Great GREAT videos

@keithmoran8004 2 жыл бұрын

I’m trying to delay the mics in studio one while monitoring live. But delaying the track only seems to change things on the already recorded track. Not while live monitoring . Any ideas fellas? Thanks

@KohleAudioKult 2 жыл бұрын

Sounds like you are using a Delay in your DAW that only affects the playback. Is you are using Cubase for example, you have to insert the delay on the input channel and not the tracks you record.

@SecretMetalFromAbyss 3 жыл бұрын

What do you use to adjust the phase and eq in real time like you do at about 14:58 of this video? Is that a mixer of your interface or is it something inside cubase?

@KohleAudioKult 3 жыл бұрын

That’s the mixer of my SSL MX4 interface.

@alexandrebozier4703 2 жыл бұрын

@@KohleAudioKult I have the same "problem", I have a Roland Quad Capture but can I do that in Cubase directly ? Or we must delay samples inside the audio interface ?

@jgmopar 3 жыл бұрын

When would you mic the back of an open cab? Would it be the same as the super balls mic ? I am enjoying your Eminence IR pack

@KohleAudioKult 3 жыл бұрын

I did a video about that on the URM Academy Channel back then. I think it’s called „you’re using the cab wrong „

@jgmopar 3 жыл бұрын

@@KohleAudioKult I will have to go look.

@klekrfaqer2114 3 жыл бұрын

"Angled setups are not that easy to recall"...[turns to Dynamount Control] :) I mean I'm a fanboy of your stuff, I definitely learned also from this video, and I certainly don't question that one can get the same results with on-axis-only setups, but in the age of the Dynamount, the Fredman clip (and drag&drop 3D modelling & printing) is the difficulty of recall really a valid argument against off-axis setups?

@KohleAudioKult 3 жыл бұрын

A Dynamount makes the recall easy, yes. But if you have a 5-10 mics setup, you’ll need a lot of Dynamounts for a full recall. 😳

@Producer_Jeff 3 жыл бұрын

Kohle help!! I just watched your URM vid on reamping without a reamp box, just using a passive DI. I am confused on the signal chain. What is that utility/ function of a “converter” and why do I need it in between my computer and the DI box. Would my Scarlett 18i8 interface suffice? Unfortunately the only outputs on my 18i8 are line level, would I still be able to use one of those outputs if I just used some sort of adapter/ converter box to bring that line level down to mic level? I am very confused!

@KohleAudioKult 3 жыл бұрын

The signal in your computer is digital. It needs to be converted to analog. There is an inbuilt converter in every interface (like your Scarlett). So nothing to worry about. It's just important ot understand where the signal is analog and where it's digital.

@Producer_Jeff 3 жыл бұрын

@@KohleAudioKult thank you so much kohle!! Your vids have helped me so much in producing my bands upcoming album! I can’t thank you enough man!

@zAvAvAz Жыл бұрын

BEST GUITAR SPEAKERS EVER = HOWEVER WITCH FROM EACH IS A SECRET UNLESS YOU ASK ME. WGS. JENSEN. WEBER. EMINENCE. CELESTION. TONE TUBBY. BGT. FRYETTE. MANY MORE.

@Se7s95 3 жыл бұрын

Guys I have a question: I’ve decided to upgrade my Blackstar 4x12 cab by getting 2 DV-77s, but what should I pair it with? Would 2 75 Creambacks work well/complement them like they supposedly do with V30s? (since the DV-77 is a bit similar to the V30) ... If not, which speakers do you think would work well with a pair of DV-77s? I play extreme metal (death/black/doom) and a bit of post rock/dark ambient This is my first time changing speakers so any help is really appreciated!

@KohleAudioKult 3 жыл бұрын

It's hard to tell, especially without knowing your taste. I love how they sound with Swamp Thangs, but that might be just me!

@Se7s95 3 жыл бұрын

@@KohleAudioKult Thank you, Kristian! I like the heavy doom/stoner style of production a lot, but I also like a slightly more modern sound when things get speedy

@KohleAudioKult 3 жыл бұрын

Me too! I’m afraid you have to try!

@Se7s95 3 жыл бұрын

@@KohleAudioKult Kristian, I’d like to ask you something else please! If I install a DV-77, a 75 Creamback, a Tornado Stealth 65, and a Hesu Demon in my 4x12 cab, could it work well or will the overall sound probably lack tightness? I plan to mic 3 speakers with 3 different mics (57, AEA R92 ribbon, Placid Audio lo-fi mic) so I’d love to experiment and combine tones

@mfkrwill Жыл бұрын

Your face at 7:21 could be a reaction gif or something

@jherman 3 жыл бұрын

Kohle! are there any plugins that move single samples like you're doing in your DAW? Killer content man!

@KohleAudioKult 3 жыл бұрын

I’m sure there are. One that I use is IBP from Little Labs. That’s a UAD plugin though.

@scallionboy8679 3 жыл бұрын

What Daw are you using? Reaper can do it by sample or milliseconds in the track panel, In phase by waves can do it also by sample.

@jherman 3 жыл бұрын

@@scallionboy8679 I’m a reaper user sir! Is this by chance under “nudge” or have I seriously just missed it all these years!

@scallionboy8679 3 жыл бұрын

@@jherman click the routing button for sends etc there beside the width and pan sliders there are two radio buttons for samples milliseconds you can set it from there. Might not work in real time i haven't tested that but on a DI it should work. I only found this very recently my self after many thousands of hours in reaper 🤣

@jherman 3 жыл бұрын

@@scallionboy8679 excellent! I shall give it a go! Thank you

@bolotskih675 3 жыл бұрын

How loud a cab must sound for recording? With a sm57 for example

@KohleAudioKult 3 жыл бұрын

It's more about the amp. The amp needs to be at a "comfortable" level. You start at zero with the master volume and at some point it feels like the amp is "coming to live". That's enough volume. you don't need more.

@lordbanhmi3389 Жыл бұрын

I usually have channel volume at about 1 o'clock, master at zero. I then slowly turn the master up until the cab starts to resonate. Do a couple test runs. and adjust from there. edit: Like Kohle said, it will start to "come to life". You really will know when you start getting in that zone.

@nj1255 3 жыл бұрын

Something I've wanted to ask: do you use those EVE (?) speakers as your main monitors or are there bigger ones in the walls or something?

@KohleAudioKult 3 жыл бұрын

Those are Amphions and yes, they are my main speakers.

@nj1255 3 жыл бұрын

@@KohleAudioKult ahh, Amphions. A bit outside of my budget! I thought the corners behind the desk had speakers but I guess they are bass traps. Thanks for the answer!

@KohleAudioKult 3 жыл бұрын

Yes, those are Helmholtz absorbers