Speaking as a guy who has designed and made tens of thousands of leather holsters over the past 38 years, I can tell you that this method certainly will work. HOWEVER, you'll get significantly better results using wax-paper instead of a plastic bag. The wax-paper not only conforms better to the profile of the weapon (thereby preserving the accuracy of the mold), it will also lubricate the inside of the holster just a bit with deposited wax.

Saran wrap is the way to go, It retains the natural Form of the gun And your results will be a tighter more perfect contoured fit to the Pistol. 1791 Makes a fine holster and I am very pleased with the craftmanship.

I just got one and was like “aw wtf…” until you think of it like a good baseball mitt that you need to break in. Great info!

I have 3 of your holsters. In addition to double bagging I put it on my belt and cinch it to the shape it will be on my waist. I let it stay that way for 2 to 4 days. The result is a perfect fitting holster. I am a customer for life. A great holster at a great price that will last for generations.

Tried to practice my draw and my Glock did not move 😂😂 most definitely giving this a try. I have the belt,holster and snap mag perfect edc setup once I get my holster broken in

I just pushed mine in without any plastic bags overnight, fits perfect

I appreciate the tips. The instructions that came with it said 15 minutes .!! ... Haha. But I'm doing overnight with 1 freezer bag and 2 narrow cardboard shims.

Parchment 📜 paper works very well (imh, better than ziplock bags) and you can avoid a lot of the bunching of ziplock bags and can dial-in the thickness (therefore the amount of expansion/retention of your holster).

breaking mine in now - just love the holster.

Thank you so much!!! I bought two holsters from your enterprise. And now I know how to get the right fit. I needed this brief instruction

I been working mine for about 2 weeks now. But I also got mine for a pistol you guys don't make them for, so I got the closest fit I could with their customer service help. After doing the zip lock bag stuff, pulling on the holster at night, leaving the pistol in there for days at a time. I finally used a little water and wrapped the pistol in the bag with duct tape around the outside in one layer super tight around all the features of my pistol. This worked amazing for me on the Canik TP9SF Elite! I love 1791 their holsters are amazing quality and their customer service is second to none!!! Love my holster and how it fits now and actually really enjoyed the process of breaking it in.

I put a cue ball into mine and let it set overnight. Worked great!

I had mine in the plastic for maybe 30 min and now it is a great fit....

Darn good video and worked like a charm. Awesomeness

I'm breaking mine in now. I really like the quality of this holster.

I'd just leave the gun In there. I like how tight it is. Adds retention.

I just bought two 1791 holsters and love them, they are slightly tight with my gun but it does go in and retains the gun. I will use Saran wrap as my holster isn't overly tight and just a thin layer should be enough.

You can also use lotion guys! Lotion the inside of the holster and it will smooth out. It’s just like a fresh base ball glove.

Aha! Maybe I can use my seal a meal to shrink wrap a couple of bags around the pistol for an exact fit.

Works for me every time

Just used this process and it worked great. Thx

Thanks for the info. Im going to try it out.

suran wrap gun, wet leather insert put on belt wear till dry.

I don’t agree ! Slide pistol in Holster , let set in Holster for a min of 48 hrs un holster re holster a few times let sit again another 48 hrs and it should be mint ! If u have a revolver with a snap lock lock that up also without twisting and turning if all possible, it’s a slow process , no need to be rushed !

My problem isn't the holster breakin but the belt through the holster slots I have the 3way fit for my Sig and it took about hlaf and hour and a straight edge to get the new 1791 belt through the slots any way of makingthat a little eaiser ?

I have a Glock 21 GEN five and I’m trying to make it fit into a Glock 22 leather holster from Galco. They don’t make it for the 21 it’s a 2.0 Galco holster will this method work?

I vacuum seal mine and leave it overnight. It's best to put cardboard in the trigger guard or the opening will collapse.

WoW! Thank you so much for posting this video. I’ve had my 1791 rig for months-the break-in instructions posted on my do wall! Just could not get this straight in my mind, but I’m an older dude. Now I got to get doing this ASAP! Then, the hours per week dry fire practice again! 🫣

MASC fit my revolver like a glove on arrival. It wasn't cheap, but is your EDC holster something you want to cheap out on lol. Definitely will order from them again!

I’m in the middle of breaking mine in now! Is there something I can put on the inside/outside to soften in a little bit? Seems really rigid

Good vid , thanks!! How did you get that 1791 T-shirt?? I would like to get one !

I literally just draw and holster over and over. Eventually it gets loosy lol

Do you think adding leather conditioner would overdo it with this process?

Does that remove any of the bluing? How about a few drops of neetsfoot oil?

I would just like to remind people when you put your gun in that plastic bag to size the holster, Make sure it is bone dry of ANY moisture or sweat, that plastic bag will cause rust to attack your gun like it was smoking crack and you owed it money.

hey, thanks for the video. I just received my holster and it is rather small. I’m able to fit my 1911 into it without any problem. Is this plastic overnight method still recommended?

What model holster is that ? I have a Glock 19 .

OK so you put it on a plastic bag that's it