In this video I show you 3 easy steps to restore your boats shine and cut/remove oxidation. we are going to buff then polish and then wax. hope this video helps show you how to get your boat looking like new again.
Пікірлер: 89
@davejoice1177 Жыл бұрын
Thanks for calling out the rotation speeds. Super helpful
@Justbereelflorida Жыл бұрын
It makes all the difference at the right speeds. The person I learned from is who told me those speeds and it’s always work well for me
@Photowayne2 ай бұрын
This is the best video I have watched so far on how to polish my boat! Thanks
@Justbereelflorida2 ай бұрын
Good luck! Have fun out on the water these season.
@leepettit9516 Жыл бұрын
Man….thank you that is a great breakdown of how, to get the best result 👏🏻👏🏻👏🏻👏🏻👏🏻
@Justbereelflorida Жыл бұрын
Hope it helps. Thanks for watching.
@johnrowlette743011 ай бұрын
Great video. Simple, easy to understand. Thanks
@Justbereelflorida11 ай бұрын
Hope it helps
@victorrafa6540 Жыл бұрын
Great video overall, easy to follow. Nice job.
@Justbereelflorida Жыл бұрын
Thank you for the compliment.
@vinny69353 ай бұрын
Awesome video, thank you!
@threebattlesАй бұрын
Great explanation. Super useful.
@misasmobiledetailing Жыл бұрын
Great video. I use a foam pad for polishing the scratches the wool pads leave behind and to add protection
@Justbereelflorida Жыл бұрын
I’ll have to try it out.
@matthew0852Ай бұрын
You found the foam pads worked fine to polish and wax?
@Justbereelflorida29 күн бұрын
@matthew0852 I haven’t used foam pads. So I’m not sure how they work
@edenpulchinski90492 ай бұрын
Great Job, well explained.
@Justbereelflorida2 ай бұрын
Thanks
@cathallafferty22043 ай бұрын
Good video.
@jayhatfield92653 күн бұрын
great video
@kkutube1972 Жыл бұрын
Great video.
@Justbereelflorida Жыл бұрын
Glad you enjoyed it
@kennethgraham6113 Жыл бұрын
Thanks very helpful
@Justbereelflorida Жыл бұрын
Glad it helped
@williamcampbell754011 ай бұрын
Great video, just use the handle, that's what it foe, lol, great job, helped alot..
@Justbereelflorida11 ай бұрын
Ive actually took off the handle. I have better control without it. Thanks for watching and commenting. Hope your boat shines new
@Greg_P611Ай бұрын
Great job! Meguiars products work so well
@Justbereelflorida29 күн бұрын
I’ve been happy with them
@josem69142 ай бұрын
This should have over a million views
@Justbereelflorida2 ай бұрын
I appreciate it. Hope it helps. I’m sure there are better ways of doing this. But it’s what works for me and keeps the boat looking good 👍🏼
@rick23.236 ай бұрын
I’d try a foam finishing pad, takes out the scratches from buffing/polishing trails you leave from wool. That reflection will 100x
@Justbereelflorida5 ай бұрын
I’ll have to give it a try
@rick23.235 ай бұрын
Promise you brotha 🤝 3ms purple foam pad is cheap and I get 2-3 boats per pad
@kkutube1972 Жыл бұрын
Would be awesome if or when you do can do a video on detailing the hull. I have a jet ski and dang, .....
@Justbereelflorida Жыл бұрын
Sure thing, great idea
@johnathansawyer8736 Жыл бұрын
Love this video! I've not waxed my boat yet. Still new (to us) does that wax hold up in salt water? Also, do you do the inside of the boat? Floor? Walls? Thanks.
@Justbereelflorida Жыл бұрын
Once you return the shine, I wax all of the smooth fiberglass surfaces. The wax will hold up for 3-6 months ive heard. But you need to buy a boat soap that wont remove the wax layer. Don’t use dish soap, buy a good boat soap.
@johnathansawyer8736 Жыл бұрын
@@Justbereelflorida awesome. Thanks!
@mrs.minor-swartz2651 Жыл бұрын
What level of oxidation requires wet sanding? Can you get any level of oxidation out with buffing?
@Justbereelflorida Жыл бұрын
I’ve never had a boat oxidized enough for wet sanding. But I’m sure professional detailers encounter them often. I just do my own boat and never had to wet sand
@user-jd6dp5hd7z Жыл бұрын
I'm new here I like your easy step by step video my wife showed me the video after purchasing the products that you are using. My question is can I buff the boat and polish later. I mean I want to oxidize my boat first and then continue to polish and wax later Tell me your thoughts
@Justbereelflorida Жыл бұрын
Yes buff first then polish and then wax. I like to do 1 side at a time and go through all 3 steps. Before moving on. Just how I like to do it, to remember where I left off.
@sidjv77 Жыл бұрын
Great video, curious what speed you did the wax at and did you use a new pad or the same one as you polished with?
@Justbereelflorida Жыл бұрын
Used a new pad for the wax stage. I wax around 2500/3k speed. Just above what the polish speed is
@Justbereelflorida Жыл бұрын
I use the same 3m pads for polish and wax. I buy 2 and use 1 for polish step and 1 for wax. You could prob use a microfiber pad for wax stage if you wanted.
@jayhatfield92653 күн бұрын
I have a 2018 bluewave, it has the raised silver metal decals . How do you compound in the areas between the letters
@Justbereelflorida2 күн бұрын
Not sure, my decals are a rubber so I just go over them. A friend of mine does boat detailing and he removes the decals on the boats
@ryanmartindell7879 ай бұрын
Great video. What are your recommendations when you’re going over decals?
@Justbereelflorida9 ай бұрын
If your decals are not real metal then the compound will basically (sand them down). I just go over mine but a detail buddy of mine pulls them off of boats and doesn’t reapply them. Hope that helps
@ryanmartindell7879 ай бұрын
@@Justbereelfloridavery helpful thanks man!
@JimCarter-mq3vl14 күн бұрын
Great video, thanks for taking the time to make it. Can this process be used on raised surfaces like molded in non skid?
@Justbereelflorida13 күн бұрын
I’ve seen where you can do non skid. But they use some type of brush head to help get product down in between the raise decking
@JimCarter-mq3vl13 күн бұрын
Thanks for the reply, I'll look into that.
@markomilankovic22352 ай бұрын
Should there be any waiting to wipe off any material applied? I feel like In other videos I have seen they usually wait
@Justbereelflorida2 ай бұрын
I wait 5 min on the wax portion
@BERZERKERSV4 Жыл бұрын
how did you attached the wool pad to the polisher?.. hook n loop ?
@Justbereelflorida Жыл бұрын
I use the Velcro pads.
@scottkimball7422 ай бұрын
Do you still do only shoulder width, start to finish when doing the whole boat. Or compound whole boat, then polish, then wax.
@Justbereelflorida2 ай бұрын
You can do it either way. I normally compound one whole side, then polish then wax and then move to the other side and repeat. But my boat isn’t very large.
@matthew0852Ай бұрын
Will the 7in foam polishing pads from harbor freight work just as well or you really suggest the 3m?
@JustbereelfloridaАй бұрын
I’ve never tried the foam so I’m not sure how well they work
@AngelLopez-qn9jp Жыл бұрын
Which pads did you use for the wax? Same as polish?
@Justbereelflorida Жыл бұрын
Yes same pad. I have two. 1 for polish and 1 for wax
@whiskeycreek4038Ай бұрын
Thanks for showing this. What speed for the wax?
@Justbereelflorida29 күн бұрын
I go same as polish maybe a tad faster
@michaelryan8306 Жыл бұрын
What product do you guys use on the interior?
@Justbereelflorida11 ай бұрын
I use the same products on all smooth gel coat
@jeevandoman3575 ай бұрын
Do you use the same pad for waxing you do as polish? Or new pad?
@Justbereelflorida5 ай бұрын
New separate pad
@jeevandoman3575 ай бұрын
thank you man, will a 9 inch 3m yellow pad work on my 7 inch makita?@@Justbereelflorida
@Justbereelflorida5 ай бұрын
It might. I’d have to see it in person, but I would think it should
@tbthegoalie3 ай бұрын
How often do you polish and wax?
@Justbereelflorida3 ай бұрын
I try once every 6 months, depending on how much use the boat is getting and how much I’m washing it
@LTZ_Z713 ай бұрын
If you use a quality sealant or better yet a ceramic coating, you’d never have an oxidation problem after the first compound and polish.
@Justbereelflorida3 ай бұрын
I do need to try the ceramic coating
@johnp8120 Жыл бұрын
I'm not sure who told you that you cant clean and reuse the pads, because you absolutely can, I use Chemical Guys pad cleaner on mine, and they come out great
@Justbereelflorida Жыл бұрын
I do clean and reuse them.
@oddlyrightoddlyright2475 Жыл бұрын
Funny how it says constant speed on the polisher box my harbor freight Chicago brand sucks and maintaining speed
@Justbereelflorida Жыл бұрын
I’ve had good luck with mine. It’s not the best of the best but it does get the job done.
@Jug5043 ай бұрын
Can I have sun hit it after 15 minutes of finishing?
@Justbereelflorida3 ай бұрын
After all the steps are done I move the umbrella to my next spot. It’s similar to don’t wax a car in direct heat of the sun. The bottle of the product should give you temperature recommendations for applying
@dfish14 ай бұрын
The best way to apply your product is with a sponge.
@Justbereelflorida4 ай бұрын
I’ll have to try it
@randyharris93573 ай бұрын
Turn music off, what does it serve on instruction video
@Justbereelflorida3 ай бұрын
Just a fan of the guys music he makes and I use it in my fishing videos. Sorry you didn’t enjoy it
@bryanmcdowell167110 ай бұрын
You didn’t say what rpm wax speed should be😮!
@Justbereelflorida9 ай бұрын
I didn’t even realize I didn’t say that. I normally do same as polish or a little faster speed.
@warrenschultz27352 ай бұрын
Sorry dude...I have used this on my lightly oxidation gel coat, it didn't even make summer, and yes I used an orbital buffer..in my opinion there is alot better!!
@Justbereelflorida2 ай бұрын
What products would you say work better? I’ve always had luck with the McGuires.