How-To POLISH GELCOAT - Shine like NEW again - DIY Pro Level Results Restore Your Gel Coat like new

Рет қаралды 309,771

8 ай бұрын

So, the GEL COAT on YOUR boat or RV is badly faded and oxidized! That's OK, I am going to show how to make your gelcoat shine like new again! Gelcoat restoration is not Rocket science, BUT You do need to know what you are doing to get quality results. My family has been building and restoring boats for over 5 decades, and we specialize in fiberglass and gel coat repair. I am happy to show You some of the techniques we use to bring back a deep gelcoat shine that will last. This is an in-depth video with 5 important steps you need to follow to get pro level results, so please follow along as I share my tricks of the trade with You. If You find this video helpful, please remember to subscribe, like, comment and share. That helps us to make more helpful videos like this. If You have a gelcoat, fiberglass, or boat building related question, feel free to comment. I will do my best to respond with a helpful answer. Thanks so much for watching! _________________________________________________________________________________________________
www.fiberglasswarehouse.com use code FISHBUMPTV for 15% off your 1st order.
patreon.com/FishBumpTv
_________________________________________________________________________________________________Amazon Affiliate Links:
Work Light amzn.to/3J1m3lB
Acetone - amzn.to/3tMTUes
Mechanic Creeper - amzn.to/3HglXFW
40-Inch 6 Caster Creeper amzn.to/3QsJasj
Air Compressor - amzn.to/3TSUrGe
Heavy duty drum fan - amzn.to/48K6aej
Gloves - amzn.to/41OpwNk
Dust Mask - amzn.to/4aPu7TC
Hutchins Mfg Air Tool amzn.to/3NRYqyY
3M Hookit Purple sand paper amzn.to/3Ha2mr6
Sand paper - amzn.to/3TRgygk
Shop Towels amzn.to/3vsRdiC
DEWALT Buffer/Polisher, Variable Speed, Soft Start, 7-Inch/9-Inch amzn.to/3kYudmI
Presta Green Blended Wool Polishing Pad amzn.to/3IX64VD
Presta Heavy Cutting Pad amzn.to/3YqExS4
Presta Super Cut amzn.to/3tCJ4aT
Meguiar's Cleaner Wax amzn.to/4aGnkLI
3M Perfect-It Gelcoat Compound + Polish amzn.to/3IZr26k (previously 3M 06045)
Wax amzn.to/3S9sYPb
Safety Glasses amzn.to/3vSSqN7
Tape amzn.to/3QsGvij
Medium Cutting Pad amzn.to/48mL3is
As an Amazon Associate, I earn from qualifying purchases.
_________________________________________________________________________________________________
how to fix chipped gelcoat, how to restore gelcoat on fiberglass boat, prepping fiberglass for gelcoat, gelcoat or paint for boat, how to apply gelcoat to fiberglass, how to do fiberglass repair on a boat, how to repair fiberglass boat transom, polish, gelcoat GELCOAT Gel Coat gel coat repair gel coat restoration gel coat oxidation faded gelcoat buffing gelcoat compounding gelcoat waxing gelcoat gelcoat repair repairing gelcoat fixing faded gelcoat gelcoat scratches fiberglass repair scratched fiberglass boat building fiberglass boat building gelcoat boat

Пікірлер: 327

@matthewpocock4824 3 ай бұрын

This channel is like a boat building apprenticeship. First class instruction and trade tips 👍

@FishBumpTV 3 ай бұрын

Wow, thanks! Glad you are enjoying the videos!

@matthewpocock4824 3 ай бұрын

@FishBumpTV I learned a little about boat building and fibreglassing from my father when I was a teenager. Now I'm 50 years old. I want to build a 13ft vee nosed punt from scratch. The information you give is pure gold. I thank you for sharing the wisdom of a professional 👍

@danballou2202 6 ай бұрын

I've been building surfboards since 1975 and was also an offshore sport fishing captain. Point is I know my way around fiberglass work. Your video's are excellent. And this is from someone who knows. I'm sure your videos are helping many folks. Great work!

@FishBumpTV 6 ай бұрын

Wow, Thanks Capt! Glad you enjoyed the videos!

@aleksandrnikolajev6863 6 ай бұрын

By the way they DO! I really enjoy learning from them!

@FishBumpTV 6 ай бұрын

@@aleksandrnikolajev6863 Thanks you much!

@shawngeraghty6347 3 ай бұрын

Searched youtube for how to polish gelcoat and your video popped up. My oxidation is minor, but your explanation of the steip-by-step process from severe oxidation was the best I've every seen. Again, my situation was jut the last two steps, but I learned a so much from your video. So good, that you got a new subscriber. Thanks.

@FishBumpTV 3 ай бұрын

Thanks so much, and welcome to the channel!

@alan.schertz 5 ай бұрын

Joe, I cannot state how awesome your presentation skills are. I think I have gone thru about 1/2 dozen of your videos and cannot believe how excellent they are.

@FishBumpTV 5 ай бұрын

Wow, thank you so much! Glad you are enjoying the videos!

@Darryl67photo 6 ай бұрын

You’re a great instructor. You clearly explain what you’re doing. You take it step-by-step you’re a good communicator. I’m very impressed with your videos. Thank you for taking the time to do what you do.!

@FishBumpTV 6 ай бұрын

Wow, you are so welcome! Thanks you very much for watching and commenting!

@michaelgreene1149 6 ай бұрын

Loved the whole video from a real pro. I've been around and in boats for 65 years. I'm 72. What a great detailed instructional video. My bass boats are garaged. I have always wanted to see how professional boat builders and fiberglass pros work the fiberglass and bring gelcoat oxidation back to its original shine is great. I watched 3 of your videos. I have never seen you on KZfaq before. I will look for more. Never to old to learn and work. Thanks. Washington State resident.

@FishBumpTV 6 ай бұрын

Thank You Sir! I appreciate you taking the time to watch some of our videos, Glad you found them interesting! We are really working on putting out a lot of How To and DIY type fiberglass and gelcoat related videos currently, so stay tuned! If you have any suggestions for content, I would really like to here you thoughts! Washington state is beautiful! I have visited it a few times, and would love to come back for more! Thanks again for watching!

@paulclarke1730 Ай бұрын

Love the long, detailed format. I’ve watched it all the way through, then repeated several weeks later, again all the way from start to finish. Great work!

@FishBumpTV Ай бұрын

Awesome, thank you! I really appreciate that!

@MooTuberyt 6 ай бұрын

I’m restoring a heavily oxidized black boat. I’ve watch a dozen videos on the subject. This is the best so far.

@FishBumpTV 6 ай бұрын

Glad to help, thanks for watching!

@static135 Ай бұрын

Thank You for taking the time to make these videos. You gave me the courage to attack the sun damaged gelcoat on my recently purchased boat. It looks amazing now. You are a true gentleman to share your trade with the world

@FishBumpTV Ай бұрын

That's awesome! Glad the videos are helpful!

@carnivorellama772 2 ай бұрын

Thank you so much for all your high quality videos! So informative, I’ve learned a lot from you. My 40 year old motor yacht appreciates the love I’m able to give it due to your instruction. Thanks again!

@FishBumpTV 2 ай бұрын

Glad to be able to help you keep your motor yacht in good shape! Thanks so much for watching and commenting!

@deancleavesmith 6 ай бұрын

Very thorough approach and the result cannot be disputed. Thank you this has helpmed me work through what I need to do for my boat.

@FishBumpTV 6 ай бұрын

Glad to help, thanks for watching!

@idahoman325 3 ай бұрын

Your instruction is top notch. As you state your a builder , I'd bet you doing a series on creating a Tiny fishing boat would be a huge hit on here as clearly there is a HUGE section of guys watching thousands of hours of converting / creating/ modifications from skiffs, plastics/ kayaks etc but seeing how a master boat builder would go about things would be impressive especially with your attention to detail / style of instructing.

@FishBumpTV 3 ай бұрын

Wow, thanks so much! I appreciate the suggestion!

@jjclarkson3261 4 ай бұрын

Your video is 'no joke restoration' with many fully explained tips and especially products used. I'm thinking about trying this on our camper

@FishBumpTV 4 ай бұрын

Glad it was helpful! I appreciate you watching

@danhogan1047 4 ай бұрын

Great video. Have a 38' Horstman Trimaran, you have given me the confidence to do my own polish and wax. Thanks so much,

@FishBumpTV 4 ай бұрын

Thanks, glad to help!

@motorv8N 2 ай бұрын

Fantastic lesson - thank you. I’m that guy standing in the boat detailing aisle scratching his head looking at all the different pads and compounds and creams and such, then saying “Ah maybe next season” lol.

@FishBumpTV 2 ай бұрын

Thanks! I hope the video will help eliminate some of the mystery involved with this process! Best of luck with your next gelcoat project

@motorv8N 2 ай бұрын

@@FishBumpTV - Definitely! I’ve got a 17ft Scout dual console and because it’s that off-white Scout uses I’ve gotten away with gelcoat neglect for far too long. Now even that colour looks pretty sad so will finally tackle this thanks to your tutorial. Cheers (BTW - I noticed you scoured right over the decals. I’m assuming if you go light it won’t hurt them? I don’t want to mess up the blue script and stripe on the side of the boat.)

@grizzlybear4122 2 ай бұрын

Sounds like just buy it all from this video.

@woutzweers 4 ай бұрын

Mr Miyaki 😊 smiled when you mentioned that.

@FishBumpTV 4 ай бұрын

Haha, you got it! Thanks for watching

@ronf.109 8 ай бұрын

That's information every boat owner can use, thanks for the great instruction.

@FishBumpTV 8 ай бұрын

Thank you Mr Ron! Appreciate the comment!

@Leblueskee 4 ай бұрын

It's gotta be so cool getting a boat back in your shop that you built 20 years ago. I'm trying to get into boat building but I'll be the first in my family to do so.

@FishBumpTV 4 ай бұрын

Yes, it really is great to have one of your boats come back home! Man that is very cool! Best of luck on your boatbuilding journey, and thanks for watching!

@backcountrylifemagazine6912 7 ай бұрын

Been watching all your vids.. Really great!!! What a wealth of knowledge and instruction for anyone wanting to build and/or maintain boats. Thx!!

@FishBumpTV 7 ай бұрын

Thanks so much! Glad the videos are helpful! Working on really growing the channel right now, so the views and comments help. We appreciate you watching!

@boatman222345 2 ай бұрын

Easily the best video I've ever watched on gelcoat restoration! Five thumbs up and thanks for sharing your experience!

@FishBumpTV 2 ай бұрын

Wow, thanks so much! Glad to help!

@waterski40 2 ай бұрын

I’ve restored about 10 boats and his instruction is the best I’ve ever watched.

@jerryweicken3015 5 ай бұрын

Very informative. Looks like I’m going to add this procedure to my winter todo list. Thanks for your Videos.

@FishBumpTV 5 ай бұрын

Glad it was helpful! Best of luck with your project!

@Michael-nx7im 5 ай бұрын

THANK YOU! I AM 84 LIKE TO FISH I ALSO WORK ON OLD BOATS . AL YOUR VIDEO'S, THIS ONE WAS ALSO GREAT. THANKS AGAIN. CENTRAL FL. EAST.

@FishBumpTV 5 ай бұрын

You are very welcome! Thanks so much for watching and commenting!

@JohnColeman-ul5rj 2 ай бұрын

Just did half my boat. I used stuff called shine supply chop top and jescar power lock plus to seal it. I watch Drake the boat detailer on KZfaq for this stuff and you for boat fix, repair, and build stuff, which is amazing. The colinite works great for after polishing aluminum T-tops and leaning posts to seal it from oxidation. Another great video, though!!! Always take ideas from everyone and find my own way.

@FishBumpTV 2 ай бұрын

Thanks for watching! Glad to help you with the fiberglass and gelcoat side of things! I appreciate the helpful suggestions and comments as well!

@markbuskens6070 7 ай бұрын

Man that definitely looks like a new boat.That dark green really faded out bad but the sanding,buffing and waxing brought it back to life!

@FishBumpTV 7 ай бұрын

Thanks brother! The gelcoat came back pretty nice.

@1965RonnieP 5 ай бұрын

Love your Videos Capt. I will be using all this excellent information. I plan on doin a mild restoration on a 26 ft striper I got as a nice end of the season sale back in September. I believe in doing everything thoroughly like you do. It is great to watch a true Craftsman they are getting more and more scarce as the years go by, lol I followed the whole build on your 29 footer. What a beast and an amazing project!! Thanks again for all your time and knowledge

@FishBumpTV 5 ай бұрын

Thank you so much, glad you are enjoying the channel! Best of luck with your project.

@Artseventy6 4 ай бұрын

Wow, what a great presentation! Thanks for posting this.

@FishBumpTV 4 ай бұрын

Thanks! Glad you enjoyed it!

@timpuckett110 6 ай бұрын

I have a 42 foot Catamarn to do. This video really helps me understand how to do it. Thank you 🙏

@FishBumpTV 6 ай бұрын

Glad it helped! Thanks for watching!

@tuhesse 5 ай бұрын

SO VERY INFORMATIVE! GREAT JOB JOE!

@FishBumpTV 5 ай бұрын

Thanks so much, glad you enjoyed it!

@denislaouenan5553 4 ай бұрын

Thank you Sir, clear and thorough instructions, really enjoy watching the whole process rather than giving instruction and skipping videoing phases as most channel do. I have been doing exactly like you describe, I have american blue hull the oxidation gets very visible, boat sits outside under canopy but the sun and the moon manage to create oxidation. I go 3M heavy, 3M finesse and colonite wax once every 12 months or so. When i got the boat I had to go 600 grit, most people say it marks the gelcoat too deep but it's not bad getting that back with 800 then 1200. the thing is to get ALL oxidation off at least once then the yearly maintenance is not so bad. It's not something one does every day so there is little moments of doubts in the process, thanks to your excellent video the doubts are lifted off. For the inside of the boat it is a bit more difficult due to the positioning of tools and body so sometime I just scrub with scotch pad (light duty) then wax. I've watched some of your other videos and really appreciate the genuine dedication you put in there. thank you Sir, wishing you and enterprise very well.

@FishBumpTV 4 ай бұрын

Thanks so much! I am glad you are enjoying the videos! Sounds like you have the wet sanding, compound and wax process dialed in. It can be a little work to get there, but it sure looks nice when you are done!

@daneagles3350 Ай бұрын

After cleaning, I used to wipe down the surfaces with lemon Pledge, wipe off the excess and cover. The next time I used the boat I’d wipe off the dust that made it through the cover. This trick minimized the hard water spots, made clean up easier and made the gel coat pop. Love the channel, thanks for the great instruction!!

@FishBumpTV Ай бұрын

Great tip! I will have to try that. Thanks for watching!

@user-qc3rc6qq9z 4 ай бұрын

Capt. Joe, these are great videos. I have been restoring a 1977 24' Stamas Sport Cruiser. MerCruiser I/O 140hp, I've rebuilt both mains and outdrives and I'm on to cosmetics. Even though the boat has been stored on a lift it is heavily oxidized and your videos are very informative and easy to follow. Of course, when you take a task on like I have everyone has a preference of how to do things. A year or so ago I ran across BoatWorks today videos and they are good, like yourself the professional is very informative, and he uses Total Boat line of products, I bought everything he used. I tried a test spot, and it came out very good. My mechanic friend turned me on to Aqua Buff and showed me a Black boat before and after pics he got to a mirror shine. I was so impressed I got the Aqua Buff 1000 and 2000 because he said he didn't have to wet sand the oxidation. I ran the Aqua Buff 1000 to remove oxidation from one side of the boat it did ok but not great. Would you recommend a wet sand first? I have Mura 1000 and 2000 pads. Recently I saw some videos on Glidecoat ceramic coat, do you have any experience with this product, and what is your thoughts about ceramic coating. I just got glidecoat ceramic system in and was preparing to ceramic coat the boat vs wax. I ran into your channel while looking for different videos of gelcoat repair and I wish I would have found it first. I called Stamas to see if I could get a color match for the Stamas gelcoat and they referred me to Mini craft gelcoat. I ordered the gelcoat from Mini craft for the year model of the boat. Because I have some gouges and dings, I want to repair the imperfections. Like the keel of your bay boat, I have trailering scars on the keel as well and a gouge on the bow. I need to make a paste and saw a video that used west system 406 to make a gelcoat paste to repair the gouges. Have you tried this for a thickening agent? Mini craft sent me gelcoat with the wax additive already added to the gelcoat, can I make a paste with gelcoat that has wax in it? I have done fiberglass repairs before, but the wax additive was always added to the final coat of gelcoat. This is what I always did as a rule of thumb because I was told you cannot build wax on wax with gelcoat. Mini Craft also sent me Fast Piranha Patch Reducer and Super High Gloss Blending Additive. I have an idea of the High Gloss Blending Additive but what is the Fast Piranha Reducer for, and where in the process is it used? Wow! I'm sorry for loading you down with questions, but I really enjoyed watching your tutorials and will refer anyone who ask to your channel. Thank you for your time. If you come down to South Louisiana I'd love to show you around. Thanks Again

@FishBumpTV 4 ай бұрын

Glad you are enjoying the videos! On boats that are heavily oxidized, wet sanding is usually the way I go. I do not usually used waxed gel except for the last coat. You can sometimes add coats as the base is just starting to cure, or apply it and then sand it to remove the wax before adding more coats. Yes, the west additive can be used to thicken the gelcoat. I have used duratec high gloss clear additive in the past for thinning the gelcoat. It is a good product, but there are others on the market that do the same thing. We have more videos coming soon on some of the topics for you guys. I hope this helps, and best of luck with your project!

@USMC0332 27 күн бұрын

I just bought an older deck boat in SW Florida. When it cools down I'm going to do this! I'm here researching so I'm ready. I have to do the top side too. I'm not starting a project like that in June, but I'll collect what i need. Thanks!

@FishBumpTV 22 күн бұрын

Awesome! I wish you the best with your deck boat project.

@barrybicknell2148 5 ай бұрын

I am in SE Florida, the oxidation capital on an in-water 45' power catamaran just 6 years old. The cost/charge to compound wax was $2,600. With you instructions, suggestions of power equipment and products to use, I have some confidence to try to keep my gelcoat up going forward. Thanks from the sunshine state🌞

@FishBumpTV 5 ай бұрын

Glad to help, best of luck with your project!

@dusty4208 5 ай бұрын

Hands down the best video I’ve seen on gel coat restoring from oxidation

@FishBumpTV 5 ай бұрын

Wow, thanks so much!

@Rayzer1989 4 ай бұрын

I agree

@D2O2 4 ай бұрын

Love Presta Super Cut! Saves so much time.

@FishBumpTV 4 ай бұрын

I agree, it's good stuff! Thanks for watching and commenting!

@user-zb1pj9ov3b 4 ай бұрын

Thanks for recommending this video, I learned a lot. Awesome job as always.

@FishBumpTV 4 ай бұрын

Glad it was helpful! Thanks for watching

@heirvon_558 2 ай бұрын

Very good content. I'm interested in restoring the top deck .Especially the bow. Some of it is textured. I imagine different tools for the textured gelcoat. Thanks in advance.

@scottwilliamson495 3 ай бұрын

This was fantastic video thank you please keep them coming

@FishBumpTV 3 ай бұрын

Thank you! Will do!

@roberthelgeson1294 2 ай бұрын

Wow great video. So helpful on actually showing the whole process and talking us through it so we understand. 👍

@FishBumpTV 2 ай бұрын

Glad you enjoyed it! Thanks for watching and commenting!

@melinda5777 3 ай бұрын

Great work here! The boat color is wonderful! ❤😊

@FishBumpTV 3 ай бұрын

Thank you very much! The owner was very happy with how it turned out. I appreciate you watching!

@everettmack5706 Ай бұрын

Great tips. I’ve always used 3M perfect it line up. Those are great for bringing back old gel coat or keeping new gel coat shining.

@FishBumpTV Ай бұрын

Glad it was helpful! Thanks for watching and commenting!

@tedfelsberg5322 4 ай бұрын

Beautiful ! Like night and day ! Thank you for another great video.

@FishBumpTV 4 ай бұрын

Thanks, glad you enjoyed it!

@xxxnonamexxx5615 4 ай бұрын

You've quickly become my favorite boat channel. Great tip on the wax and waxing process. Thanks!

@FishBumpTV 4 ай бұрын

Wow, thanks! I appreciate that.

@juanenriquezmartinez6864 4 ай бұрын

Many thanks for your video, I have Bavaria 30 cruiser sailing boat and now I know what to do.

@FishBumpTV 4 ай бұрын

Glad to help

@nickn257 5 ай бұрын

Great video. I’m going to try it on my Everglades 243. Thanks for sharing

@FishBumpTV 4 ай бұрын

Thanks, and best of luck with your project!

@jimvanhamlin3217 6 ай бұрын

Thank you for the introduction it really shine some light on what I got to do to mine

@FishBumpTV 6 ай бұрын

You are very welcome! Glad to help!

@jeffbaldwin9842 3 ай бұрын

Wish I had seen you do this a year ago. I busted my butt compounding and buffing only to get a very unsatisfactory result. I got a good shine but a mottled look to the light grey color. Your video makes me think I probably needed to wet sand as it was apparently heavily oxidized. You make it look easy, nice work!. Thanks for the tips, looks like I might be doing the job again!

@FishBumpTV 3 ай бұрын

Yes, it sounds like you may need to go a little more aggressive to remove the heavier oxidation. Glad the video was helpful and I wish you the best of luck with your project!

@DennisGarbo 2 ай бұрын

Just ran across your video. Very well done Answers many questions I had about doing my boat. Great video!!

@FishBumpTV Ай бұрын

Awesome! Thank you!

@chasefetrow9138 6 ай бұрын

Top notch video. Great work guys!

@FishBumpTV 6 ай бұрын

Much appreciated! Thanks!

@SM-dv6wi 5 ай бұрын

Great video! Got to see the finished boat!!!!!

@FishBumpTV 5 ай бұрын

Thanks!The final product is on the channel, you will just have to look through our video Shorts to see it. It turned out really nice. I appreciate you watching!

@papa_swig Ай бұрын

Great video. Thanks for taking the time to put it together!

@FishBumpTV Ай бұрын

Glad you enjoyed it! Thanks for watching and commenting!

@douglasbaum1846 6 ай бұрын

Considering buying my first bass boat. I have to go used because new is $$$$. I looked at a mid 90's Ranger today that needs s little work and tlc. This video shows very well how to do part of the job. Thank you very much for explaining it and showing what can be done for the finish of an old boat. Ps I subscribed

@FishBumpTV 6 ай бұрын

Glad the videos are helpful! Best of luck, and welcome to the channel!

@tonygravley1311 6 ай бұрын

you are a great teacher! thank you so much! I am planning on using your steps for my Stratos 201 pro 1989

@FishBumpTV 6 ай бұрын

Thanks! Glad to help! Best of luck with your project!

@TEXASHANDYMANSVCS 3 ай бұрын

Great job 👍

@FishBumpTV 3 ай бұрын

Thank you, much appreciated!

@JoseHernandez-kl2wg 3 ай бұрын

Great video that help me to restore my boat color.

@FishBumpTV 3 ай бұрын

Glad I could help! Thanks for watching and commenting

@jimmypowell1283 Ай бұрын

Nice detailed video thanks

@FishBumpTV Ай бұрын

Glad it was helpful!Thanks for watching!

@raycleaningsolutions 6 ай бұрын

My favorite KZfaq channel

@FishBumpTV 6 ай бұрын

Wow! Thank you so much!!

@traditionfishingcharters 8 ай бұрын

Pretty Work Capt Joe!!!

@FishBumpTV 8 ай бұрын

Thank You Sir! Appreciate you watching and commenting!

@christopherchapman8893 2 ай бұрын

Great video and detailed explanation - Thank you!

@FishBumpTV 2 ай бұрын

You are welcome!

@johncollins5021 6 ай бұрын

That looks great. My boat is 43 foot sailboat. It takes more than a weekend.

@FishBumpTV 6 ай бұрын

Yep, that's gonna take a minute!! Thanks for watching!

@stualand 3 ай бұрын

Thanks captain great video!

@FishBumpTV 3 ай бұрын

No problem 👍thanks for watching!

@Brian-mp2mv 2 ай бұрын

Something that helped me out tremendously when I DA'd my MasterCraft ProStar 190 white/red boat was getting some of that 1/4 inch poly tubing like you see for refrigerator ice makers, and a spigot valve with a 1/4 inch brass compression nipple coming off the side. (or some way to reduce the line down to 1/4 inch) Then adjusting the water flow to keep the hose flooding above my sandpaper. Used way less sandpaper, because I kept it flooded and cleaning the paper. (When I was a kid in the 70's, we used this type faucet for a water cooler line to an automatic float on the water cooler.) EDIT: Also, I removed decals and was fortunate to work with a printing shop where I cut my own decals

@FishBumpTV 2 ай бұрын

Thanks for the suggestion and for watching!

@ericcope8216 29 күн бұрын

Great video, thx.

@FishBumpTV 23 күн бұрын

Glad you liked it! Thanks for watching and commenting!

@2ndbar 3 ай бұрын

Looks great.

@FishBumpTV 3 ай бұрын

Thanks!

@user-cc7wv9kh9e 5 ай бұрын

awesome video! Thank you

@FishBumpTV 5 ай бұрын

Glad to help, and thanks for watching!

@JoseTavares-ns8en 2 ай бұрын

You Are Doing A great job

@FishBumpTV 2 ай бұрын

Thanks, I appreciate that!

@jamesparker6017 Ай бұрын

Coral Gables 🌴🇺🇸 Enjoyed the video. Iam redoing my classic 19ft Donzi Hornet 🐝 ! 🏄

@FishBumpTV Ай бұрын

Outstanding! Thanks for watching and commenting!

@RussellB 2 ай бұрын

bro you are a lifesaver

@FishBumpTV 2 ай бұрын

Glad to help! Thanks for watching!

@turnandburnroadtripssouthe8432 8 ай бұрын

Excellent explanation

@FishBumpTV 8 ай бұрын

Glad you liked it! Thanks for watching and commenting!

@wallacegrommet9343 4 ай бұрын

Dark color gelcoat is so much work to keep free from fading and oxidation.

@poponthedock9667 6 ай бұрын

Thanks for the information

@FishBumpTV 6 ай бұрын

My pleasure, Thanks for watching!

3 ай бұрын

HAVE 2 BOATS, ONE IS A 20FT. PROLINE CENTER CONSOLE FOR MY FISHING OTHER IS A 1996 21FT. SEARAY SIGNATURE 5.7 THATS FOR MY OLDER KIDS TUBING, THATS THE ONE I'M FOLLOWING YOUR STEPS ON WAXING, BURGUNDY AND WHITE WITH LIGHT OXIDATION, DETAILER WANTS 400.00 SO I'M DOING MYSELF. THANKS FOR THE VIDEO!

@FishBumpTV 3 ай бұрын

Thanks for watching and best of luck with your project!

@62heliman 2 ай бұрын

Looks awesome finish to me...

@FishBumpTV 2 ай бұрын

Thank you very much!

@cjgambill 3 ай бұрын

thank you!

@FishBumpTV 3 ай бұрын

No worries!

@justinnelson7639 6 ай бұрын

Thank you for the info, great video

@FishBumpTV 6 ай бұрын

Glad it was helpful! Thanks for watching and commenting!

@justinnelson7639 6 ай бұрын

@@FishBumpTV i reverently was given a boat, it needs alot, mostly it just floats at the moment. I ordered hull cleaners, polish and wax, then started to clean. Some oxidation did get removed but the color i believe it not what it should be. Of i may sent you some photos and additional information, i would like to, before i try to finish the polish and apply the wax. I believe you could simply answer me concerns. Are you open to the idea?

@user-mv3sr8zq2t 5 ай бұрын

Amazing

@FishBumpTV 5 ай бұрын

Thank you much!

@StormInfrastructurePvtLtd 4 ай бұрын

Best video..

@FishBumpTV 4 ай бұрын

Thanks!

@dannylayton1106 3 ай бұрын

OK Captain,you have shown this is an art of a lifetime of dedication. The buck stops here. So I am trying to understand if ceramic coating is a wise consideration or not to retard the oxidation. Some ceramic coating manufacturers void their products once they know it's for a boat or there are other issues with application. We have outdoor toys and tow vehicles that we keep garaged to stop oxidation but really want your take on wax or ceramic coating for the long haul. Subscribed and really enjoy the love shown to caring for the equipment.

@FishBumpTV 3 ай бұрын

Wow, thanks! And welcome to the channel! We have always been a fan of the fleetwax. I may have to look into the other products and put together a video for you guys!

@salvocantone4407 2 ай бұрын

lavoro fantastico bravo

@FishBumpTV 2 ай бұрын

Thank you so much!

@PerryShriver 4 ай бұрын

good stuff.👍👍👍👍

@FishBumpTV 4 ай бұрын

Thanks!

@tvonzweck 5 күн бұрын

That is by far the best video on gel coat restoration I've seen, and I've watched too many of them. It should be obvious to me, but I've got to ask what size backing pad and cutting pads were used?

@tomogletree1 8 ай бұрын

Great video

@FishBumpTV 8 ай бұрын

Thanks! Glad you enjoyed it!

@JimmyJammer1 6 ай бұрын

Hey dude, you are a total badass!!! Really enjoyed a few of your videos. Thanks for your expertise….. peace….. jimmy

@FishBumpTV 6 ай бұрын

Haha! Thanks man! Glad to help

@thebeastman1651 Ай бұрын

What a great video! Finally a video that really explaines every step in stead of the useless videos. I have a darkblue gelcoat from 2004. I want to do the whole hull. I have a tiny chip that is missing from the gelcoat, it is through the gellcoat untill the underlayer. Do you have a tip how I can plaster/repair this spot. Like some blue liquid gellcoat repairpaste? Greetings from the Netherlands

@FishBumpTV Ай бұрын

Glad you enjoyed the video, and thanks for watching all the way from the Netherlands 🇳🇱! Yes, chips or dings in your gelcoat are a common problem and can certainly be repaired. I do have several videos here on the channel on that topic and I also have a gelcoat color matching video. There are companies that sell gelcoat repair kits here in the U.S. One of the more popular brands is made by a company called Evercoat. I show the kit, and how to use it in my gelcoat color match video. You may want to go to our channels home page, and just scroll through a bit. I am sure you will find some more helpful videos!

@andreimarius9695 Ай бұрын

You're as pro as possible, great lesson, thanks for this video. I'm actually about to buy a boat that seems like heavy oxidation. Until seeing your video, I thought that the said boat needs a full regelcoat job. Btw. how long that wax is going to hold in salt water? Wondering how often should I wax the boat ! I'm totally new on the subject, so that's my excuse if I asked some nub question.

@FishBumpTV Ай бұрын

Thanks so much! I usually recommend waxing at least once a year, but twice wouldn't hurt. It is also helpful if you can keep the boat covered or sheltered from sunlight when it is in storage. Hope this helps!

@Skankster87 Ай бұрын

This has been super helpful, great video! I do have a couple questions: 1) you said don't do this in the sun, what about the heat? It's summer in Phoenix which means the low is 88 degrees, and heats up really quickly? I'd prefer to do the resurface in the winter/spring but I've got a big trip coming up and I'd like to restore the boat. 2) Any recommendations on corners, edges, angles, or tight surfaces surrounded by 3d letters? So far I've just used small attachments on my drill that can reach smaller spaces. Thanks!!!

@phxbro1 6 ай бұрын

For rv,s with oxidation on gel coat we have used a moderately stiff wash brush on a poll and mix dish soap, cleanser and yellow awesome ( from dollar store) in a 5 gallon bucket . First wet maybe 6 foot area and wash/scrub with moderate amount of pressure then rinse before it dries. Then rub hand over surface to see if all oxidation is gone and then spray a coat of clear , same that goes on a car . Often after wash/scrub the rv looks so good that you think it doesn't need the clear coat. We're in Phoenix and it gets super hot and no shade or building to work in . We don't buff with machine because it always shows buff swirl marks and only lasts 3 to 6 months then it needs it again. When spraying the clear it shines like new and no more buffing and waxing again and again. The rvs we do are for sale for dealers so after the job we don't see it again, so far everyone is happy. We do the same for aluminum and metal surfaces.

@FishBumpTV 6 ай бұрын

Thanks for watching! The standard on boats is the wet sand and polish like we did. Sounds like what you guys do works really good on RVs. I appreciate your comment!

@Armydude2017 6 ай бұрын

please dont ever clear coat a boat. the 1994 skeeter i am restoring was cleared from the factory. it WILL start to flake over time. so far, the only way i have found to remove it and get back to gel. is a razor blade scraper. and its a long, tedious and painful process.

@BobSmith-my7sg 21 күн бұрын

Thank you for the detailed video. It was very informative. I have a question for you. I have a 15 year old Glastron bow rider that was getting oxidized and ugly. When I used McGuire's 49 Oxidation Remover Heavy Duty Cleaner on with a Makita polisher, the back end of the hull started to turn pink with very little polishing. The boat was not sanded. I stopped polishing as soon as the pink started to appear. Can you tell me what the pink material is? What should my next step be? Thanks in advance for your advice.

@spacerm3178 4 ай бұрын

Awesome stuff- thanks for taking the time to explain your process fully. I can't seem to find the soft sanding pads you use on the air tool- can you add a link or product info?

@FishBumpTV 4 ай бұрын

Thanks! I will try to add them to the links, they are made by 3m if that helps at all. I appreciate you watching and commenting

@MarineDetailSupply 7 ай бұрын

Dear Capt Joe, I watched your excellent video explaining oxidation, its causes, and preventive measures. The products you highlighted are available at our stores. Nevertheless, recent technological advancements offer even better and faster results. I recommend exploring STARKE Yacht Care. Their lineup, including Level R, Elevate, Ignition, and Triple P, has become the #1 choice in the Marine industry, widely adopted by professional Detailers. Notably, major boat manufacturers like Freeman Boatworks, Barker Boatworks, Xplor, Young Boats, Calcutta, Tarpon Boatworks, LTB, and many others have made the switch from 3M to Starke in the last year. This shift is attributed to Starke's innovative formulas, unlike other brands that have remained unchanged for over 30 years. Given your experience, I believe you could greatly benefit from this technology. I'd be delighted to send you some samples for a firsthand experience of its efficacy. P.s. Feel free to see some demonstrations on our channel. Best regards, Capt. Ken

@FishBumpTV 7 ай бұрын

Thanks for checking out our channel. I have heard of your products, and have seen some videos on them as well. They look like they work great. I would be happy to try them out, and show the results on video if you would like. Just let me know what you would need from me. Thanks again!

@MarineDetailSupply 7 ай бұрын

What would be the best way to reach you?

@DJCARLITOSHN 3 ай бұрын

Love your videos man!! Do you happen to have a video about wiring/re-wiring your boat? I'm planning on doing it but I need more knowledge about it. Thank you!

@FishBumpTV 3 ай бұрын

Thanks! Episode 24 in our boatbuilding series touches on wiring, but it is not a in depth tutorial. I hope to do a video in the future on that for everyone. I appreciate you watching!

@jamesrose7657 2 ай бұрын

Man, what a video. You did an amazing job at covering step by step. I have 1 question, I have some yellowing on the top rails of my boat, will this eliminate that as well?

@FishBumpTV 2 ай бұрын

Thank you very much! It should help with the yellowing, but hard to say for sure. Nothing wrong with testing a small area and seeing how it goes. Hope this helps and best of luck with your project!

@mattmarsch7882 17 күн бұрын

Great video! How come the space between the lettering looks as good as the field even though it wasn’t wet sanded?

@1957cajun 8 ай бұрын

Love it! Thanks for all the tips! I’d really like to see you do the same thing for the nonskid deck. I have cleaned and compounded mine to get all the stains and dirt off but I can’t seem to get it to repel all that dirt and stains. I’ve used several different types of liquid waxes and they just don’t seem to really seal the deck.

@FishBumpTV 8 ай бұрын

Thanks for watching! I will try to make a non skid specific video to cover that. You might want to try cleaning the non skid with a bristle brush and dawn soap after compounding. That will remove any compound residue left in the gelcoat pores. Then follow up with a high quality paste wax. Hope that helps. Appreciate your comment!

@1957cajun 8 ай бұрын

@@FishBumpTV Thanks for that! I did not do that. I did use a compound with a bristle brush on a machine but I did not wash that off the way you suggested. I also didn’t use a paste wax. This is what I’ll do next time.

@crawford323 6 ай бұрын

What about weathered and cracked fiberglass surfaces. My old boat looks like Mona Lisa cracks on the topsides. How does one approach this kind of repair And restoring. When I say restoration, I don't mean to showroom floor shine quality. Sand, fill the cracks with something and repaint with what? This boat is 40 plus years old and was passed around by family and friends who learned how to sail with her and it was a beater learning boat and abused. Now it up to me to keep her from further decline. How do you approach this kind of deterioration and repair?

@crawford323 6 ай бұрын

What filters and treatment does your compressed air have? Oil and water removal? Discuss this if you would.

@crawford323 6 ай бұрын

Explain the term "Cutting" in reference to what you are doing.

@ontimespiva 3 ай бұрын

Love the videos! Would like to see how to do a color change of gel coat. What exactly needs to be done to go over with a different color gel coat of your boat had say red and you wanted to change to blue? Thanks!

@ontimespiva 3 ай бұрын

Also, if you’re sanding off some material, does it remove the top wax layer ??

@ericneering6357 23 күн бұрын

I bought my Chicago brand 18 years ago at Harbor freight I’ve been using it for 18 years sanded decks with it polished polished cars cut the cord off and it once my fault not but it’s done everything I’ve asked

@FishBumpTV 19 күн бұрын

Thanks for you comment! It's always good to get feedback about quality tools that work well.

@davidcox7378 2 ай бұрын

Like the videos , good techniques to use on my boat. I have a question about removing a brushed on paint job and getting it back to the original gel coat..it's very rough and not very smooth. Boat has set outside for 23 years Boat is a 1973 17ft. Boston Whaler.

@FishBumpTV 2 ай бұрын

Thanks for watching! That's a process that would need a detailed video to fully explain. I will try to make a video on that process as soon as I can.

@maze400 Ай бұрын

FANTASTIC AND INFORMATIVE.... I just bought some FIBRE GLASS-EVERCOAT CO Gel Coat Scratch Patch (for a small chip in my kayak's gelcoat. And also picked up Meguiar's M6332 Flagship Premium Marine Wax. After watching this I will add the soapy water spray bottle to the process. Any advice?

@FishBumpTV Ай бұрын

Sounds great! I have several other gelcoat repair and maintenance videos on the channel that together should really help you get a complete picture of the process. Just take your time, and follow the steps. With a little practice and patience most people catch right on. Thanks for watching and best wishes with your project!

@TheBobwei Ай бұрын

thumbs up for shore

@FishBumpTV Ай бұрын

Thank you!

@primate2744 Ай бұрын

Awesome video! Thank you! Any chance you could do a video on bottom paint removal? Thinking I'll go the stripper, sand and buff route but I'd be curious to see your professional opinion.

@FishBumpTV Ай бұрын

Thanks! Glad you enjoyed it. We don't do much bottom paint Removal, but your plan sounds pretty solid. Maybe to a little testing in a hard to see location before you go all in. I hope this helps and thanks for watching!

@primate2744 Ай бұрын

I appreciate the response. I supposed I was hoping for a miracle approach that I hadn't seen yet to make my job easier. lol