How to Build a Carbon Fiber Plane？Process of VTOL Fixed-Wing Drone Construction

Рет қаралды 1,819,565

8 ай бұрын

#drone #vtol #fixedwing
Company Website：www.yangdaonline.com
Email：info@yangdaonline.com
YANGDA manufactures drone gimbal cameras, industry-grade multirotors, and fixed-wing VTOL drones for mapping, SAR, and surveillance applications.
--------------------------
😀 Thank you for watching our video!
❌ This video does not contain paid ads.
📧 Contact: satisfactoryprocess@gmail.com
🎥Copyright(C) 2022. SatisFactory Process. All rights reserved.

Пікірлер: 501

@killshadow3 7 ай бұрын

Those blue masks look very efficient at stopping small particles from entering their lungs.

@amago Ай бұрын

I guess they are even more effective than the invisble gloves and the transparent painting garments.

@knutbergan 7 ай бұрын

Great video, and build looks like very high quality. Brought back some memories from my earlier days doing RC model aircrafts.

@mics1417 7 ай бұрын

Nice Video! I like how it shows a lot of the intermediate fabrication steps. Most consumers don't understand the labor and skill required to make certain products, and this video certainly helps with that.

@Josh-zh 7 ай бұрын

Products that steal American intellectual property. A land of thieves.

@trichoubdz9210 7 ай бұрын

11:34 11:34

@trichoubdz9210 7 ай бұрын

12:42 12:43 12:43

@trichoubdz9210 7 ай бұрын

12:42 12:43 12:43 12:43

@trichoubdz9210 7 ай бұрын

12:47

@drgeoffangel5422 7 ай бұрын

Excellent drone design and manufacturde and flight. This company really knows what its doing, and has some amazing engineers ! Well done!!

@nickj2508 7 ай бұрын

These guys take their time and do a good job. I was surprised/impressed to see at all of the Carbon fiber inner structure. The videography and video length is just right for me, more please.

@robert5 7 ай бұрын

I think that inner structure was needed to mount and secure the electronics and controls systems and perhaps the batteries.

@elpeluca06 7 ай бұрын

Que perfección... Digno de admirar!! ❤

@augustosegovia7438 7 ай бұрын

Me encanta¡¡ un video muy demostrativo de la calidad de contruccion de los droenes

@SimonTyler_humanfly 7 ай бұрын

This was a fascinating video and I really appreciate you sharing it. It would be very nice to see the employees wearing quality respirators when painting

@lordhexon 7 ай бұрын

Yes, but they have some what decent ventilation vacuum system.

@williamhoughtaling1602 7 ай бұрын

That is a waterfall filtration system. No fumes at the painting area and the water catches the paint overspray.

@danielkemp4860 7 ай бұрын

They're worried about c0vid, not resin fumes 🤣

@sicks6six 7 ай бұрын

I sprayed Cellulose coatings on pipe coverings for the petrochemical industry and we used waterfall filters and didn't need a mask, waterfall filtration systems remove 100% of all airborne particles from the air, in this booth all the walls and ceiling are extractors and air is drawn through a waterfall which is the full length of the walls and six foot high, very impressive filters, the paper mask is common in china for everyone to wear all the time, they had a huge problem with TB and the government ordered every school kid, shop worker and public employee etc to wear them in an effort to help eradicate the TB virus,. PS it's a fantastic machine don't you think. . . .

@shargunankalimuthu514 7 ай бұрын

R 2:29 6🎉@

@DinosRcModels 7 ай бұрын

I recognize all the actions carried out in the procedure...some even done in a somewhat rough manner although with a satisfactory result..

@GlassicGamer 4 ай бұрын

Why are they wearing surgical masks instead of respirators? Those masks won't block any of the fumes.

@HakanAras 7 ай бұрын

This video was amazing. I really enjoyed watching it. It might be a good idea to make one of these next to my foam planes.

@MarkJ-hh9oy 7 ай бұрын

Awesome these guys really know what their doing

@ShandiNicole1982 7 ай бұрын

I was wondering if it was going to be a VTOL or just a drone with wings. Was nice to see that they cut the lift motors for forward flight.

@jktonse 7 ай бұрын

Awesome design and superb technology 😊

@willembont4790 6 ай бұрын

Nice work and excellent craftmanship. Thanks for sharing.

@unglaubichuberlieber8048 7 ай бұрын

danke, this is a very EDUCATIONAL + THOUGHT PROVOKING VIDEO, nochmal DANKE DANKE DANKE ALLES GUTE

@odnorob 5 ай бұрын

Молодці! Гарний результат!

@ohtayukiho6444 2 ай бұрын

これはドローンの制作工程ですね。ホビーではなく兵器としての性能を備えた制作現場の映像は素晴らしいです。

@christopherwilson6527 3 ай бұрын

This was incredible to watch. Looks a very nice bit of kit!

@fonwoolridge 7 ай бұрын

Wow - fantastic build! And simple but very clever overall design.... I believe we will see many similar designs to this in the near future - with the flying cars that are coming..., Bravo!

@aerbon 4 ай бұрын

i don't think flying cars are coming in the near future. it's not that we can't make them, it's that the idea itself makes no sense when you look into it.

@someguydino6770 7 ай бұрын

thank you; this looks like a "state of the art" shop. Nice to see "natures composite" (the plywood) combined with a thin layer of carbon fiber in a sandwich material! (Now if we could teach trees to grow the intricate shapes that we wanted!) This craft is still performed mostly by hand by skilled people. Gotta appreciate the "sushi chef like skills" that are required to trim the finished pieces after removal from the molds. 15:08 I'd never seen that water bath spray booth process before; but it makes sense that it would be REALLY good for dust/ overspray particulate control. Everyday; the dumpsters are going to be FULL of all of the the high tech consumable materials that are necessary for these processes. Looks like YANGDA and FOXTECH are direct competitors?

@binarumah 2 ай бұрын

Thanks for sharing. Excellent drone manufacturing video. Now I understand why carbon fiber is expensive because it's labour intensive work.

@GhostRyderFPV 7 ай бұрын

Just for the irony, I would have loved to see a 20x20 flight controller running AruduPilot, lol. That is a beautiful creation, thank you for sharing the layup to the the flight. Bravo!

@Ph4nToMfr 7 ай бұрын

I flown this kind of airframe with ardupilot (pixhawk though)

@darrenpferdehirt 7 ай бұрын

30.5 x 30.5 on the Holybro Kakute F7, and supports both Betaflight and Ardupilot. I have one on an Iflight XL10 running BF, if I want to torture myself again, I'd switch it to Ardupilot and relearn what I've forgotten. Probably won't though. Lol...

@manuel.camelo 7 ай бұрын

Teach us Drone Electronics ! So AWESOME DUDE !!! 🙂

@VTH-idea 29 күн бұрын

so good quality. I really like products made from carbon...

@antoniekruger8631 7 ай бұрын

Brilliant guys, thanks.

@adailtonalcantara8034 7 ай бұрын

Parabéns. Isso pra mim é a realização de um sonho. Gostaria de puder conhecer a fábrica

@sparky6200 7 ай бұрын

Omg its just so easy - the next free 6 weeks I get I'll get started on one!

@theosky7162 Ай бұрын

Excellent ! Particularly liked the the fine detail and craftsmanship displayed. Thanks and Regards !

@masterQ20 7 ай бұрын

*Excellent man, thank you for sharing your work, God bless you*

@hoagietime1 7 ай бұрын

There's nothing ground breaking or original about anything there, just a bunch of excellent craftsmen who make a well designed vtol. I thought the custom pdb and esc board was cool, using large easy to repair components. Really cool

@nickanrc 7 ай бұрын

Very cool building process video!!! 😊

@dodafarias9753 7 ай бұрын

Da hora, magnífico

@williamhoughtaling1602 7 ай бұрын

What is the angled scraper/knife your using? I need one like that 😊

@abcdefg4570 7 ай бұрын

Very nice! As I've already mastered everything else required to build one of these, I now just need a vacuum bagging system. Making the molds is a pain, though. My current method of constructing UAVs is laminating hotwire cut polyurethane foam with fiberglass and epoxy resin.

@tyyamnitz8408 7 ай бұрын

What kind of UAVs do you build?

@abcdefg4570 7 ай бұрын

@@tyyamnitz8408 ~2m wingspan long-range UAVs for ultra long-range missions. It's mainly for fun, just to take beautuful video and enjoy the views and flying anywhere. It's an incredible feeling of freedom. Designing and building the UAVs and configuring the GCS equipment is half the fun too.

@tyyamnitz8408 7 ай бұрын

@@abcdefg4570 that is so epic. I’ve started the process of making my own as well because I have all access to my university’s labs and hacker spaces but this will be my first aerospace project so I don’t know where to begin. Do you mind sharing your design process that takes place before you even start with construction? Do you design the uav in OpenVSP or some other software? Or do you just use pen and paper

@hitleraliraqi 7 ай бұрын

@@abcdefg4570انا ايضاً اريد التصميم او المخطط وشكرا لك

@AndreyOdessa999 7 ай бұрын

How can I contact you?

@damiancolledani8170 7 ай бұрын

Excelente acá en Argentina fadea hace el ia-100 Malvinas con estás tecnología. Un avión hecho íntegramente en materiales compuestos. Gracias!!!

@baldassarealessi1007 5 ай бұрын

Thank you video brilliant compliment

@roman1324 7 ай бұрын

Технику безопасности еще повысить и вообще молодцы.

@imsoaring 7 ай бұрын

I like the single pusher prop idea for long loiter flights!

@dronemoodbr 7 ай бұрын

Que coisa mais linda!

@goldbornmusic2025 7 ай бұрын

Excellent video. Love that they just run ArduPilot. Now, where can I get one?👍👍👍

@seamuscashin2606 7 ай бұрын

wow i am giving up making model planes this standard is the best

@albertrozenfild2963 7 ай бұрын

Супер современные карбоновые технологии полностью базируются на ручном труде и массе отходов производства.

@michaelg2000 7 ай бұрын

just awesome guys!

@ChainsawFPV 7 ай бұрын

Excellent video. Love that they just run ArduPilot. Now, where can I get one?

@isnannugraha1368 7 ай бұрын

Amazing job

@ash.ab.5575 7 ай бұрын

Brilliantly made

@fredericmartin8758 7 ай бұрын

Voilà un des futurs des armées modernes.

@user-cs3ob5ps7r 7 ай бұрын

Хорошая работа, качественная.

@sailingpacificstar Ай бұрын

Very impressive. Thanks for sharing.

@muhammadqaisarali 7 ай бұрын

Very well done

@ModellpilotEU 4 ай бұрын

thanks so much, you made my day.

@Imrankhan-in8qu 7 ай бұрын

Excellent video ❤❤❤❤

@virgil1981 7 ай бұрын

Wow, great job!

@ioannisbatas1614 7 ай бұрын

Superb !!!

@Mdf76 7 ай бұрын

good work !

@DIYDaveT 7 ай бұрын

Nice drone!

@xman577 7 ай бұрын

In my younger days in the 1970s used to make aircraft parts out of fiberglass. Times have changed.

@ivanenev323 7 ай бұрын

Great. I only wish there were CAD files and schematic available for download :)

@RICKY-RIKON Ай бұрын

Keep dreaming dude! 😂🎉

@Sabotage_Labs 7 ай бұрын

I'll take 3! Some slick kit.

@wacotom3729 7 ай бұрын

Super👍👍👍👍👍

@andymunnings9109 4 ай бұрын

"You are very smart, I like your work."

@Improver12 7 ай бұрын

Video wonderful interesting very very beautiful from Iraq 🇮🇶 I love ♥️ you all the South 🇰🇷 Korean people

@raymond4191 7 ай бұрын

Awesome!!

@RICKY-RIKON Ай бұрын

Amazing! 😁👍🏁

@kavorka8855 5 ай бұрын

Well done!

@pagaquifama3897 10 күн бұрын

The best!

@Jptoutant 7 ай бұрын

this thing is NICE

@alexmcmeekin2658 7 ай бұрын

Nice production work. However..... not enough glove or proper facemask usage! Different countries and different standards I guess? Handling mixed resin on a daily basis even if just a smear on the fingertips is a bad idea long-term and if there's a tendency for dermatitis it's accelerate it massively! Paint shop had a nice water shield booth but those guys should have had appropriate masks, not just simple covid/surgical ones.

@Tony-. 7 ай бұрын

Perhaps the fans are installed not for cooling, but more for ventilation. If the air flow is good, the damage is reduced, but not eliminated.

@giuseppe4909 7 ай бұрын

And now you see why they can make things for less money… (not to mention the much lower wages paid)

@alexmcmeekin2658 7 ай бұрын

@@giuseppe4909 Yes, but that's the way things are. Wages are cheaper in differing parts of the world, but when learnt the skills are as good.

@GARLENILSON1 7 ай бұрын

Excelente 👏👏👏👏

@210srake 7 ай бұрын

Bravo 👍💪 👍💪

@mark6302 7 ай бұрын

thats awesome

@mrjoepietube 5 ай бұрын

simple and reliable seperate fixed motors for drone mode and plane mode. slight drag and weight penalty. however the drag penalty could be easy reduced bij proper lining up the props. bldc motors can be stept bij software like a kind of crude stepping motor.

@scribepl 8 ай бұрын

gr8 drone!

@Sir-Dexter Ай бұрын

nice work

@juanjobsarg Ай бұрын

Excelente equipo

@secondov1 7 ай бұрын

멋집니다.

@plorks445 7 ай бұрын

Nice construction. Good luck grinding fiberglass and carbon fiber without a respirator though.

@ricknoah9184 4 ай бұрын

Seeing how these guys are making "commercial" drones, I can't help but wonder what their market is. This ain't no park flier. By the size, materials and technique, this is not a cheap plane by any means. Interesting that it has a defined cargo area. Very interesting and I hope to see these in actual use. Is this a prototype for Amazon ???

@MrPod15 7 ай бұрын

I don’t know where these come from, but Russia would love them, so I guess they will have a visit soon!

@Originalit 7 ай бұрын

做的非常不错

@KamranKhan-by5mc 7 ай бұрын

EXCELLENT

@phillmartin6196 7 ай бұрын

Built my own bait boat in carbon years ago in the half hour tea break with vac bag then autoclave, this model aircraft is easy

@aprianto1985 6 ай бұрын

Great video

@barkster 4 ай бұрын

how are you smoothing out the thin strip that goes between the two fuselage halves once you put the top on?

@dynamicdavid 7 ай бұрын

Is a Kit available for purchase? Or otherwise at least a List of electrical avionics hardware required?

@AlfDavidFjeld 7 ай бұрын

fantastic work guys! but as someone that has worked a car t bodyrepair and painting, you should really invest in better breading protection. using so little as you do, you will end up with lungproblems after a while. it costs a bit more, but it is better to invest in the good equipment, and stay healthy for longer, this pays of both for the workers, and the company you work for, there will be less days of sick, and the company can keep good workers with special experience for longer.

@TuttleScott 7 ай бұрын

just what I was thinking, surgical masks arent going to cut it.

@luizmattos9031 7 ай бұрын

Parabéns.

@fftr5647 6 ай бұрын

I love innovation

@TCphotographer 6 ай бұрын

what is the range of this drone from the take off place and air time? and how silent is it? plus the lens on its camera? 200-500mm?

@bangboy1238 7 ай бұрын

Sangat canggih ❤❤

@mickysltd 7 ай бұрын

Please provide details on the Telemetry and VTX range

@youngtygaa 6 ай бұрын

So Africa we need this technology please 😮

@PIRO04584 7 ай бұрын

🤩I Loved the Production✈️💨 and Quality of Work💪 that makes it a 👍Professional Level. I congratulate you for your Great Work on a Large Scale. greetings✌️ from NEW YORK🗽USA🇺🇸

@satisfactoryprocess 7 ай бұрын

Thank you so much 😀