How to Build A Fabric Inlay Surfboard Full Glassing Process
Рет қаралды 2,146
5 күн бұрынGlassing an 8'10 custom order fabric cloth inlay surfboard start to finish. Board is based of a 70s singlefin outline with widepoint fairly far forward but has the flatter deck and down rails of that of an 80s style twin fin. The underside has a triplane surface - concave with chined rails then to double and vee towards the tail.
Hope you enjoy.
Please like and subscribe if you feel it is necessary.
Thanks
@gregbos7094 3 күн бұрын
Nicest board I’ve seen for a long time
@electrofishsurfboards 3 күн бұрын
Thanks
@windfoil1000 2 күн бұрын
Beautiful board. Nice for me to see as I'm planing to do my bathroom counter in epoxy over a plaid fabric. Nice to see someone good doing it first. Thanks.
@electrofishsurfboards 2 күн бұрын
@@windfoil1000 thanks, sounds like a great project. Suppose you could laminate it on a layer of plywood. I would probably put 2 layers of fiberglass over it still to give it some strength and then could pour a thicker layer of clear casting resin to polish back into. Let us know how it goes!
@linusdnylund Күн бұрын
what a stunner! great idea with a fabric, opens up so many new ideas for look and feel of a surf board that-'s less traditional
@electrofishsurfboards Күн бұрын
Thanks. Yeah adds a little extra weight aswell but with alot of longer boards weight gives a smoother ride.
@guilhermefoltz 4 күн бұрын
What a board, beatiful!
@electrofishsurfboards 3 күн бұрын
Thanks
@andrewhassall3163 Күн бұрын
Great video !!! Looks even better in real life Amazing work !
@electrofishsurfboards Күн бұрын
Cheers Rew
@wtfftw24 Күн бұрын
I'll let you know what I think: Damn that looks cool 😎
@electrofishsurfboards 22 сағат бұрын
😆 thanks!
@rjones4247 3 күн бұрын
Banging work Josh 🤙🤙🤙
@electrofishsurfboards 3 күн бұрын
Thanks
@Mongiloyd 3 күн бұрын
Very nice! What is that stringer? Some serious dark wood or something else?
@electrofishsurfboards 2 күн бұрын
@@Mongiloyd thanks. This is actually just pinlined black ontop of the ply stringer. I do work with alot of darkwood stringers but they are around £100 extra to purchase so most customers just opt for the pinlined ply.
@johnharrington9655 3 күн бұрын
That is superb! Whats the ball park figure for a custom job like this?
@electrofishsurfboards 3 күн бұрын
Thanks. There are alot of variables like blank type, gloss/matt ect but this would be around £950
@johnharrington9655 2 күн бұрын
@@electrofishsurfboards thanks for the reply, one day fingers crossed 🤞
@PaulClifton-kj8yi 2 күн бұрын
A question. Do you ever put fabric on the deck of a board, or is it only applied to the bottom? Thank you.😊
@electrofishsurfboards 2 күн бұрын
@@PaulClifton-kj8yi Hey Paul, it can go on the deck. I suppose most opt for it on the bottom where it won't get covered in a layer of wax. I have also seen fabric deck inlays on older boards and they tend to be more prone to delaminate on the deck. I think this depends on how well they are laminated alot though. Thanks
@PaulClifton-kj8yi 2 күн бұрын
@@electrofishsurfboards Thank you for the unexpectedly rapid reply!
Md Kausar 2.0
Рет қаралды 13 МЛН