Handmade wooden fins, foam stain, channels, resin tint.. most shapers would block that caller! You accepted the challenge and absolutely nailed it. Well done.. The fin jig is ingenious and thank you for showing us how you shape your channels. Great set out and execution.

Glassed on fins are so cool. Thanks for making this video!

Old-head tip for those glass on fins from a guy who's been building and repairing since the days when all boards had glass ons. When doing your patches up the sides of the fins, orient your cloth on a 45 degree angle to the base of the fins rather than at 90 degrees the way you did. Your fins will be less likely to crack at the base that way. I'd probably do a thicker piece of fin rope as well. Great build video. Cheers.

Bloody beautiful!

A real beauty!

That is so satisfying to watch, amazing

Been waiting for another video, and this was worth the wait. That thing looks sweet dude.

U R an Artist!

Absolutely gorgeous dude. Love watching you build boards.

So awesome! thanks for sharing that build

Awesome as usual

Absolute heater of a sled!!! keep these epic videos coming man!!

I loved watching this video. I’m just starting out trying to shape and this was awesome. And the board is beautiful. Thank you!!!

So cool!

That's an amazing job, the colourway just perfect

Superb

Beautiful piece of work. Dig the music tracks too.

I love this one! Very creative. Great video...

Thanks for Sharing your craft , great stuff and perfection .cheers Shaneo

Your video’s have brought me back to shaping after 12yrs. Thank you for all the excellent content. May need to thank you with a board order😎

Damn, that is one fine looking board! Great job, thanks for sharing your skills. I have only made three boards so far. All of them with very simple bottoms. Thinking about trying something with channels. You make it look too easy.

Proper beaut!

This board looks good👍

have you ever watched the JC shaping video? I rode for him back in the 90's, and he made the most amazing magic boards ever.... never got a bad board from him, they were all magic...

that was epic as

Killer work as always man! Almost finished building my shaping bay in the new shed, 3 blanks waiting to go.

Hey man, your shaping skills are amazing , but I also appreciate the little comedy you sprinkle in like at ending when you stood by the door after you closed it and re opened, genius

So goooood

Lindo trabalho à moda antiga, a prancha ficou linda, boa ondas ao dono... Aloha...

Another beautiful work of art. I’m always curious how long these take. It’d be interesting to know how long each stage takes, maybe even the curing times.

Love the videos, always checking for a new one! Hahaha

Greate Man... 👍👍👍👍👍😍😍😍

Very Nice Board, and your process is pretty interesting, awesome work. looks like a good and fast ride. Cheers from Baja Bro.

Routing the plan shape is something I always thought about have only made 15 boards I never had any trouble getting things nice so never bothered nice to see someone actually hand shaping without a cnc good one from nz

Great vid as usual!! Love your jigs for installing glass on fins! Would be awesome to have the ends possible to setup for different cants. Cheers man, Milos / Apatyka

I'm making me a jet bottom soon. Seen videos to motivate my self! 🏄

He'll yeah!!!!!!!

Good job bro🤙

Waouuuuuuuuuuuuuuu Sweet Candy Man. Well hello from Belgium

As an old 70s' glasser, my favourite on-foam swirls were blue and yellow=green

thank you senior for the information and good morning and happy sunday indonesian time for you blessings are always abundant in every innovative idea of your work and effort i will try to reduce all processes in this video

noiiiiice

thanks

👏👏

I used to have a bunch of old big surfboards that were clark foam and I always meant to strip the glass and make a new board, but never did...

Hi sir big fan of your vids .I would like to get into shaping but I don't really know what essential beginner tools I need to get into it. Could you make a video about what esstiential tools a person could use to start shaping and some basic materials needed to shape a surfboard. Keep the lekker vids coming bru. Love from South Africa 🇿🇦

Awesome! Thanks for doing these! With the resin for the lamination, did you also make a clear resin batch and add that after the green swirls? Or was the resin from the green swirls enough to do the lamination? Also, which brand of acrylic sealer do you use and do you use gloss, satin or matte? Thanks for your time!!

sweet, another build! thanks for the excellent work / videos! p.s. you should do a merch shop :p your Logo would look sick on a Hoodie

I love your art, but can u please do more vids of you surfing the boards you make? It would just like satisfy me along with a few other ppl I would imagin

Hey man, love the videos. I was wondering what you use for your final seal coat? Are you rolling on resin or something else? Cheers

When adding colors are you mixing the color both with the epoxy resin and hardener? If so in what order ? Can you do a video on that . Going to start my 1st board build . Yea I'm old gonna be scary lol. TIA

you do such incredible boards, my dream is to have one of yours. I have just broke my only one one month ago :,)

Top work Mitch. Tell the crowd how many hours start to finish a board takes.. 😂 (not including curing time) And have you ever hot coated the deck just after the deck lam has gelled. I'm a big fan of it now.

Very great job bro! Do you prefer works with eps or pu? Why? Thanks for the videos!

You are talented. I used to love trying to catch a peep of Spider Murphy shaping boards when I was a lighty through the backdoor for Safari Surf boards here in S Africa..What cloth are you using on the fins. I see you wet the rovings then put cloth half way up and then what looks like fine see through wax paper?

Wow, what a beauty!, Your shape skills inspired me. How long is the time between the foam stain and the glassing? It’s completely cured or almost? Best regards from the Baltic Sea!

Looking to get into shaping, was wondering where the best place would be to get blanks?

Love the work, how come you did a yellow resin foam stain instead of just pouring the yellow and green together when laminating?

Awesome as always, when are we gonna see some merch! Would love to support.

Man your videos are just savage man keep them coming. Do you seal the board in any way before you lam? I just glassed the bottom of my second board but first time with the catales resin and i was not fast eught so it started to gum up on me so i had a few air bubbles to sand out. So now do i just glass the top and fill in my sanding? also i tryed to tint the resin and i added way too much I got sooooo much to learn but I am having fun in the shead. thank you for the videos and the advice. PS keep telling people about the buy you a coffee page. Every other youtuber says it every video

Love your vids. The little yellow sander, is it an orbital or disc sander?

At 2;45 I really like the look of that flexi-block. Is that from car body work shops? Very interesting. The song: is that Kylie Monogues sister? I used to go out with her back in the 80’s Not Kylie, but the sister……………..

Hey man, love all of your vids, really clear and concise and the end results are beautiful. Quick question for you, when you measure out your rocker and find that there is too much, how can you reduce it? Is it a case of taking more material from the middle and bottom of your blank? Cheers amigo!

Hey mate, was that yellow a tint or pigment? Cheers

Hello again mate, can you tell me how you paint just the rails ? Make a resin color selling on the blank or it’s after lamination ? Cheers 🍻

Thanks for great video+ What is the yellow thing that you pour on surfboard ? resin with yellow tint or acrylic color? if i use eps foam and pour resin with tint for sealing and coloring in the same time , Do you think it gonna work? thanks 🤘

Love bottom color swirl. Did you just use green shades of pigment on bottom glass lamination or did you use some clear resin as well. Trying to understand how bottom stayed mostly yellow with just streaks of green?

Do you shape for a living? Or just a hobby? Love your work!

Hey man love the channel - been catching up on ur vids. Sick board! Just wondering what kind of paint you used for the yellow onto the foam? Churz :)

Hey mate! What kind of router bit do you use to cut the foam from the template? I can't find anything longer than 2.5 inches. All my blanks are in the 3". Love your videos!!! I will be making some boards soon!

WHoah! what are the pros and cons of foam stain vs. spray paint? can you do a full foam stain deck and bottom? Please do a polished board next. Cheers!

Hey Great work and a great video. What do you use for colouring the foam ?

Tasty build. The router bit you use to cut your outline - that's got a top bearing on it right? What's the cutting depth? Need to find a bit like that!!

what are your tools and where do i get a pice of foam this big??

Also what grits of sand paper did you use to blend the rails?

Do you do rails/ruck by eye or have lines or measurements?

Is that yellow color that you put on the bottom first, paint or pigmented resin? And if it's paint, what kind?

Is this board for big waves? looks sweet

Hi ! I have a question please. Could you give us the name of your spray glue you are using please ? 🙂

Hi did you use yellow pigment or tint? Pigment being opaque tint being transparent

Hi, could you please tell me what kind of paint you are using on the foam blank before glassing , Thanks. :)

What is it that you always roll with a roller onto all your boards before wet sanding? Gloss?

Where do you get your blanks

what kind of ruler did you use for the fins placement

Hey brother ! Can u explain what chemical adhesive do you use ? Or epoxy or something please ...

What kind of sander are you using?

What bit do you use to route your outline?

Glue the fins to the board? Why not just add fin boxes to make fins interchangeable?

What did you use to spray paint the board and what kinda of paint did you use

It’ll be cool if the bottom is the top

Hi, where can I find the cutter for the trimming machine?

How many inches up are the twin fins placed?

What would happen if someone opened the door......!

Yo how much that go for??

how much does a plank cost?

hey shrednaught im trying to get into surfing and haven't got a board and am looking for one just one problem i dont have much money i would absolutely love it and appreciate it a-lot if you could make me a board i know a-lot of people probably ask you for this and im just going to be another but if you could i would be much appreciative i really love your stuff and hope you see this. if you did make a board for me could it be 6,4 37 to 41 litres please shrednaught please from maurice

Twin or Quad !!! Sorry, that stable fin is not necessary !!! Other else, pretty nice board !

Megga

If let’s say i want to buy one of you’re boards (like costume made for my needed measurements), could u contact with me?