How To Build A Flagstone Walkway

How To Build A Flagstone Walkway - Using Concrete

Рет қаралды 209,773

Күн бұрын

#lawnandlight #flagstonewalkway
4-1/2" Diamond Blade for cutting flagstone - amzn.to/3MtDB9y
Please consider subscribing if this video provided you value. This is how to build a flagstone walkway on top of concrete. Follow the steps carefully and you will be walking on your very own creative flagstone pathway very soon. Flagstone installation is not easy, but very rewarding when you get to the final walkway or patio. If you need to skip around to the different steps, please use the time stamps below. Hope this helps, feel free to leave a comment if you have a question.
**One thing I forgot to mention - You won't need as much of the Type N mix for your joints. So just use the mix rates. Don't mix full 5 gallon buckets of this.***
Concrete Mixing Video - • How to Make and Mix Po...
CHAPTERS
0:00 Intro
0:25 - Concrete
0:52 - Step 1 - Clean Concrete
1:03 - Step 2 - Forms
2:07- Step 3 - Lay Out Flagstone, Mark & Cut
4:33 - Step 4 - Concrete Bed
4:50 - Concrete Bed Mix Rates
5:32 - Step 5 - Lay Bed Concrete and Flagstone
6:37- Step 6 - Mortar Joints
9:19 - Joint Mortar Mix Rates
9:46 - Borders
10:42 - Step 7 - Pressure Wash
11:26 - Final Reveal
We are an amazon associate and receive a super small commission if you purchase from our link. Thank you for your support.
#flagstone #landscaping #lawnandlight

Пікірлер: 165

@joaquinalvarez8632 3 жыл бұрын

How much did you charge per sqr ft? I have a client who wants the exact same thing in my state?

@lawnandlight 3 жыл бұрын

Hey Joaquin. I’ll tell you our cost and you can determine what you should charge based on your rates. This job was 100 sq ft. - concrete installed by subs - $725 - 1” pallet of flagstone $400 - 2.5 bags of type 1/2 Portland $30 - 1 bag type n Portland $25 - 1 bag hydrated lime $20 - 4.5” diamond blade $30 Our client provided the brick for the borders If you have never done it before, this size job will take around 55 man hours. With experience, you should be able to shave 10 hours or so off of that. Hope that helps.

@lawnandlight 3 жыл бұрын

Also, if you live up north where the ground is constantly freezing, there may be more precautions you need to take to keep it from breaking up

@joaquinalvarez8632 3 жыл бұрын

@@lawnandlight 👌

@ricardomartinez5088 2 жыл бұрын

Did you get a good price for a project like it?

@gamobeats. Жыл бұрын

@@lawnandlight how do you calculate the amount of material you need?

@turbobird2000 3 жыл бұрын

Super video and job! The lady of my house said “Wow and wants to chip in...”. Thanks for sharing!

@lawnandlight 3 жыл бұрын

Thanks turbo! Appreciate y’all watching and supporting the channel. Good luck on your job!! Get er done

@ViresEtDecus 11 ай бұрын

looks good. but if you're watching this and you aren't in texas or somehwere else down south...don't do this. If you're anywhere that gets any number of actual freezes or snow do NOT lay a flagstone walkway like this. The concrete crack, heave, and fail. Please use at least crushed concrete gravel if not chipped limestone gravel for your base. It will drain much better and have a LOT less freeze/thaw issues over time.

@lawnandlight 11 ай бұрын

Good advice. Different techniques for different climates

@MrsWhite-jt1gw 7 ай бұрын

We had several ice storms in Texas last few years. Would a poly-additive allow elasticity? Would the commercially sold plastic paver base squares prevent cracking?

@jcox2728 Ай бұрын

I've seen plenty of these walks in climates that get plenty of freezes. I reckon if the grading is good, grouting is done thoroughly, and sealed. It will hold up pretty well

@davidvallejo135 3 жыл бұрын

Thank you as this video may help me make a flagstone entrance to back yard to drag up trash container to front yard for pickup. Thank you from BURROS Lawn Care here in San Antonio

@lawnandlight 3 жыл бұрын

I hope so. Send pictures to our Instagram if you end up making it. We would love to see it!

@number5484 Жыл бұрын

Just what I was looking for. Thanks for the video.

@lawnandlight Жыл бұрын

Awesome. Thanks for being here

@stevekalas4943 2 жыл бұрын

Spectacular Cutting and fitting stone and final job - Gave me some ideas!

@lawnandlight 2 жыл бұрын

Thanks so much Steve. Hope your project turns out stellar

@dougb5044 10 ай бұрын

Much thanks for this. I'm renovating my wood deck and because of this video I decided to remove a small section and install a stone pad using some granite slabs left over from another project. 4x4 PT perimeter with 4" concrete poured to 2" to 2-1/2" below finished top, type S mortar for the bed and type N for the joints. I have some DIY experience with carpentry and drywall but this video gave me the confidence to tackle this skill.

@lawnandlight 9 ай бұрын

Awesome. Good luck with your project

@violavicki 2 жыл бұрын

Gorgeous!

@lawnandlight 2 жыл бұрын

Thanks Victoria

@pletcherscott 2 жыл бұрын

Glad i watched this and avoided getting in over my head -

@lawnandlight 2 жыл бұрын

It’s a tough job

@lauranewman7606 3 жыл бұрын

My patio dream one day.... Great work

@lawnandlight 3 жыл бұрын

Awesome. Good luck in your project. Hopefully sooner rather than later.

@jcox2728 Ай бұрын

Wow, that turned out great. I'm getting things ready to take on a similar project, replacing an existing walk.I will definitely be referencing back to this video several times over. The one issue I have is calculating the amount of flagstone I will need. I've asked the hardscape dealers, but they can never give a straight answer.

@rtang10005 3 жыл бұрын

great video! beautiful work.

@lawnandlight 3 жыл бұрын

Thank you and thanks for watching

@MicheleBauer 3 жыл бұрын

Excellent!!!!

@lawnandlight 3 жыл бұрын

Thanks Michele

@vierdoesit 2 жыл бұрын

This video is extremely helpful. I’m planning to make something like this at my house and this was perfect. I’m glad you included the 3:1 mixtures. I didn’t know about any of that or the types of mortars, awesome vid and thanks?

@vierdoesit 2 жыл бұрын

Thanks!!*

@lawnandlight 2 жыл бұрын

So glad it helped you Vier. Hope your project goes fantastic.

@theeclecticreader5657 2 жыл бұрын

Great job!

@lawnandlight 2 жыл бұрын

Thanks for watching

@AButterflyinChrist 3 жыл бұрын

This is very nice! Great job! “Love God and Love others!” I love it! Amen in Jesus’ Name!

@lawnandlight 3 жыл бұрын

Thank you! Amen Glory to the Lord. Thanks for supporting the channel

@vincentgarcia5561 3 жыл бұрын

Good job bro this video is very helpful

@lawnandlight 3 жыл бұрын

Thanks Vincent. Appreciate you supporting the channel

@MH-iy6oe 2 жыл бұрын

That video editing was awesome

@lawnandlight 2 жыл бұрын

Thanks M H. Hope you’re having a wonderful Wednesday.

@andrewandstacieweller1927 3 жыл бұрын

Thanks

@lawnandlight 3 жыл бұрын

Thanks for watching.

@tsinay40 2 жыл бұрын

Love it

@lawnandlight 2 жыл бұрын

Thank you

@crixustreeturf 2 жыл бұрын

Very nice 👍🏻

@lawnandlight 2 жыл бұрын

Thx

@candiceharmon628 2 жыл бұрын

That voice is all I can focus on. 😍

@lawnandlight 2 жыл бұрын

Thanks for watching. We appreciate your support

@rogerbeaird5742 3 жыл бұрын

Nice job 👍 yes Sir ⚔️⚔️⚔️⚔️⚔️🇺🇸

@lawnandlight 3 жыл бұрын

Thank you sir. Appreciate you watching. Have a great day

@matthewtheking Жыл бұрын

Like button activated 👍✅💥👈

@lawnandlight Жыл бұрын

Thanks Matthew. Glad to have you here!

@Mav... 3 жыл бұрын

That was a great job! Thanks for making this video. Wish you were based in Oklahoma.

@lawnandlight 3 жыл бұрын

Hey there. Thanks for joining us!! We are glad you are here. Are you thinking of tackling your own flagstone project?

@lupitchr1 3 жыл бұрын

Great video...if landscaping doesn't work out for you, you can probably get into video editing. The montage at the end was pretty cool to watch!

@lawnandlight 3 жыл бұрын

Thanks for watching Jeff and for the compliment. Have a wonderful day!!

@AliAhmad-gr6hk 2 жыл бұрын

Big fan of this stone. I Live in North America and most landscapers afraid to mess with this stone.

@lawnandlight 2 жыл бұрын

Awesome. It is hard to work with because none of it is uniform.

@lawnandlight 2 жыл бұрын

Thanks for watching!

@Donna-vh5ym 2 ай бұрын

Subscribed. I realize this is 3 years old, but I hope you see this. I wished I'd seen you first. I nred help. We put in a Flagstone walkway (not on concrete) just dug and made sure we had a slope and reinforced on each side. We filled with sand and gravel. I'd say it's about and inch apart from Flagstone to Flagstone...problem is...the sand washed away as it rained. Please dont tell me I need to pull everything up and start over again.😢

@kayBTR 3 жыл бұрын

Thanks for posting! That was a really nice pathway the way you set each piece. Years ago my parents set slate down into a bed of concrete in the kitchen and it did great. What are your thoughts on that, with the cement coming up between the pieces as it is pressed into the cement. I was thinking of trying it on an outdoor patio.

@lawnandlight 3 жыл бұрын

Sounds like a great idea

@proscapedesigns 2 жыл бұрын

Whole Lotta cuts on that one... good gaps though! Use acrylic bonding for mortar with Lyme. It'll keep from hairline cracks while settling... Overall good job and good explanation.

@lawnandlight 2 жыл бұрын

Thanks Proscape. That's awesome. Thanks for the tip

@jamesogle6070 2 жыл бұрын

Looks great, what about joints that are recessed slightly then mortar with pure white sand topping the joint (like roping) but even with the stones add sealer after the mortar dries to preserve the white so the stones stand out?

@lawnandlight Жыл бұрын

Could work. Have never tried it though

@JeffLentz 2 жыл бұрын

Looks really good!!! I noticed that the concrete looked like it was finished very smooth. My intuition would be to have the concrete crew leave the surface rough and textured-like drag a broom over it while it’s wet-so that the mortar grips better. Any pros or cons to leaving the concrete rough?

@lawnandlight 2 жыл бұрын

It actually works a little better I’m sure to leave it rough. Helps the bond

@lawnandlight 2 жыл бұрын

Thanks for watching!

@jasonadamik2206 8 ай бұрын

My friend who does this type work told me that for me to repair the shoddy 'professional' that was done and then cracked up during the first winter here in New Mexico that I should get what he called 'milk', a bonding agent. Can you what it does, how to use it, abs why you didn't use it?

@a1sausie453 3 жыл бұрын

YEEEEE HAAAAA

@lawnandlight 3 жыл бұрын

LLLLEEEEETTTTTSSSS. GGOOO!

@adriansanchez7803 2 жыл бұрын

Hey nice work ! One question do the walkway have to be leveled side to side and only slope down ? Or slope side to side as well ?

@lawnandlight 2 жыл бұрын

Hey Adrian. It’s not absolutely necessary but a little side to side slope helps water drain off quicker.

@lisachao689 3 жыл бұрын

Question about adding the brick boarder. Did you do a base of concrete below the brick or just apply the brick on top of dirt/ gravel base? If a concrete base how many inches deep would you suggest? Any issue with connecting an existing concrete base to a new base for the brick? Love, love the video!

@lawnandlight 3 жыл бұрын

Good morning Lisa. You can just lay some rock base or use your mortar mix. Don’t try to lay more concrete base. Too much trouble. Holler if you have more questions. Good luck on your project.

@lisachao689 3 жыл бұрын

I bought a older home in fort worth last year and the walkway from the street to the front porch sunk over time and i thought instead of pulling out the old concrete i would put flagstone on top of the existing concrete but wasn't sure if i needed to add more new concrete on the side for the brick trim. I also want to flair it out a bit where it starts at the street and connects to the brick porch. Kind of a hour glass shape walkway so not all just strait lines because the existing brick porch is curved, semi circle, so might all look like it was planned.

@lawnandlight 3 жыл бұрын

That makes sense. If your adding concrete for the fan out areas then it wouldn’t hurt to add the lips for the brick. But you don’t have to. You concrete guy can just as well create a little rock base for you.

@drewfogle Жыл бұрын

I’m interested more in the sand + type n + hydrated lime mix. Will this work in cold climate areas? This mortar mix in between the stone seems too good to be true, but seems like an excellent option. I don’t know of any other option. Polymeric sand doesn’t work for gaps that wide.

@lawnandlight Жыл бұрын

Hey Drew. We have never done this type of installation in a cold weather climate. I would imagine that it would be different. Anybody else out there in the KZfaq world have experience with this?

@KevJustN84 10 ай бұрын

I have had my rocks in place for years with just used sand but over the years with the shop vac it's gone so I want to cement it into place.

@lawnandlight 10 ай бұрын

Awesome. Good luck

@svce2007 17 күн бұрын

Where can I hire u for this kind of flagstone work to get done on my front yard ? I live in Austin,TX

@ricrobertson1 3 жыл бұрын

What did you charge for the paver job is it per sq foot or the job . I am just trying to get a idea of what cementing paver in cost 🤔 great job 👏 Thanks , Ric robertson

@lawnandlight 3 жыл бұрын

Hey Ric. Scroll down a bit. We charged by the sq ft but honestly we didn’t charge enough on this one. This type of finished look takes a while. Another guy asked that and I walked through the cost. You will be able to work out your numbers based on the cost and your man hour rate. Thanks for watching and we appreciate your support for the channel.

@VicenteHernandez-qz4qw 3 жыл бұрын

thanks for teaching me, tomorrow is my first patio in my business, how much do you charge per square foot?

@lawnandlight 3 жыл бұрын

Hey Vicente. I’ll tell you our cost and you can determine what you should charge based on your rates. This job was 100 sq ft. - concrete installed by subs - $725 - 1” pallet of flagstone $400 - 2.5 bags of type 1/2 Portland $30 - 1 bag type n Portland $25 - 1 bag hydrated lime $20 - 4.5” diamond blade $30 Our client provided the brick for the borders If you have never done it before, this size job will take around 50- 55 man hours. With experience, you should be able to shave 10 hours or so off of that. Hope that helps

@VicenteHernandez-qz4qw 3 жыл бұрын

@@lawnandlight Thank you very much for taking your time, I already have an idea to charge, thank you very much.

@lawnandlight 3 жыл бұрын

@@VicenteHernandez-qz4qw you bet brother. Good luck!!

@bmc5180 Жыл бұрын

Could you use polymeric sand for the joints on a project like this?

@lawnandlight Жыл бұрын

You sure could

@elk80 2 жыл бұрын

I have flagstone on my interior floors, and the old mortar joints look horrible and discolored. Could I cover them all up with A new grout layer on top?

@lawnandlight 2 жыл бұрын

You could but the thinner it is the quicker it will chip up. There may be a finishing compound that would work better. Also I think there are ways to clean the joints as well. That may be your best option.

@MycobraII 2 жыл бұрын

Instead of laying a concrete base, would it work to mortar the flagstone to a road base (rock dust mix)?

@lawnandlight 2 жыл бұрын

I’m not sure. Never tried it.

@NightSky777 Жыл бұрын

Probably depends on your overall Soil type. Even with hard packed Base, if you e got a lot of Clay in soil, you can expect contraction and expansion ...which will likely to eventually cause cracks in your joints imo

@wendywei6557 3 жыл бұрын

Can you tell me what kind of mortar used for joints?

@lawnandlight 3 жыл бұрын

Hey Wendy. Thanks for watching. I’m pretty sure it talks about it in the video 👍🏼

@rustyvick1043 6 ай бұрын

Can you use sika flex on your joints

@lawnandlight 6 ай бұрын

Never tried it

@gianfrancocattina1014 Жыл бұрын

Can you tell me more about the mixing please

@lawnandlight Жыл бұрын

There’s some other videos with helpful info on youtube

@eduardocanales3483 Жыл бұрын

Do you know if they added Rebar to the concrete base?

@lawnandlight Жыл бұрын

Wire mesh

@eduardocanales3483 Жыл бұрын

@@lawnandlight nice

@danielcleary8797 2 жыл бұрын

How do you deal with unsettling soil that trends to move

@lawnandlight 2 жыл бұрын

A good concrete guy

@alien4053 3 жыл бұрын

Nice. Unfortunately this won't last 1 year in my neck of the woods. We got winter weather and freezing of water will break up all that joint work in no time at all.

@lawnandlight 3 жыл бұрын

Hey Alien. What do you guys do to keep your joints from cracking?

@alien4053 3 жыл бұрын

@@lawnandlight I've never seen anyone around here mortar joints. It's too easy for the water to find a crack, get in and freeze, and it's game over. The joint are usually filled with dirt/grass, small pebles, mulch, etc. It's just basically anything that drains. Of course the look is not the same but it's better than busted up grout.

@lawnandlight 3 жыл бұрын

10 4 that makes sense. What about brick houses? Same issue?

@alien4053 3 жыл бұрын

@@lawnandlight Lots of brick and stone homes around here. Walls are vertical and water doesn't get a chance to pool up, settle, and seep in to joints. Walls also don't get walked on which causes joints to move/crack, etc.

@lawnandlight 3 жыл бұрын

Very true

@nialljoyce6011 Жыл бұрын

Did you fellas put mortar in between the flagstones & the concrete? I assume you do to make sure of the bond and incase individual stones are unstable right? Thanks

@nialljoyce6011 Жыл бұрын

Actually another question meant to ask you guys, how do you do the fall off (1/8”) to one side for rainwater? Thank you 👌🏼

@lawnandlight Жыл бұрын

When you raise the concrete forms, just pull one side up a little more.

@lawnandlight Жыл бұрын

yes. because the stones are placed on wet mortar, it makes it easier to level

@nialljoyce6011 Жыл бұрын

@@lawnandlight thanks guys, looking forward to more videos there great 🫡

@lawnandlight Жыл бұрын

@@nialljoyce6011 You bet, our pleasure

@texascrossbowdude636 2 жыл бұрын

Stupid question and I cant find a video on this and maybe because it's not recommended. I was thinking of making a 12x27 patio with flagstone instead of a poured concrete slab. Can you remove all the sod, lay a base down, then put mortar on the base, then flagstone or does the flagstone need to sit on a concrete slab? I dont want the expense of both

@lawnandlight 2 жыл бұрын

You absolutely can. It’s way harder though and susceptible to mistakes. You basically lay the concrete and set the flagstone at the same time. Again, hard to do. We don’t do it. I wouldn’t recommend it but there are some professionals that will.

@texascrossbowdude636 2 жыл бұрын

@@lawnandlight ok great thx for your feedback and your patio/yard looks great. Great job

@lawnandlight 2 жыл бұрын

My pleasure brother.

@corazonada141 3 жыл бұрын

Where do you buy the flagstone???

@lawnandlight 3 жыл бұрын

You should have a local stone dealer or quarry.

@jonathangonzalez-ruiz506 2 жыл бұрын

So the steps are dig, lay concrete base, and then piece the flagstone and fill with mortal in between the spaces? Not… mortar under the flagstone but just between the spaces

@lawnandlight 2 жыл бұрын

Both ways work

@hawaiiansrule 3 жыл бұрын

Hello, Can you tell me the name and color of the brick that you used for the border?

@lawnandlight 3 жыл бұрын

Hey Fornaro. I honestly have no idea. The customer had it already. It almost looked like a light peach. Your best bet it to grab a couple flagstones and match it to the brick you like. Or vice versa

@lawnandlight 3 жыл бұрын

Thanks for watching

@josuemartinez7205 2 жыл бұрын

What state are you in? Thank you

@lawnandlight Жыл бұрын

Tex

@maryjaneisgreen 2 жыл бұрын

My man!! That looks great! I’d love to call you sometimes to ask you about a question I have with a property I’m going to do. Would love your insight. My name is Josh and I’m the owner of heaven on earth in Texas

@lawnandlight 2 жыл бұрын

Hey Josh. Thanks for watching brother. Id be happy to talk to you. Shoot me a Facebook message at Precision Turf so we can get hooked up.

@ricardomartinez5088 2 жыл бұрын

What is a fair price for a job like that

@lawnandlight 2 жыл бұрын

Around $3500 - $4000. It’s very labor intensive.

@markus9598 3 жыл бұрын

Immer Trass-Zement bei Naturstein...

@lawnandlight 3 жыл бұрын

I’m not sure what that means but thanks for watching

@markus9598 3 жыл бұрын

@@lawnandlight when working with natural Stone use cement with trass... no portland

@lawnandlight 3 жыл бұрын

10 4. Thank you

@Thackula 3 жыл бұрын

What color flagstone was this?

@lawnandlight 3 жыл бұрын

It’s been a while but I believe it was cherokee

@Thackula 3 жыл бұрын

@@lawnandlight thanks, looks great!

@lawnandlight 3 жыл бұрын

Thank you

@harishrs7697 3 жыл бұрын

മലയാളി

@lawnandlight Жыл бұрын

I like Takis too

@roarkegautreau1662 2 жыл бұрын

Pretty rough work your joints are so inconsistent what I do is cut and lay all the stones tight then go along with my concrete saw and cut all the joints after everything's dry that way the joints are all the same size makes for a way nicer look

@lawnandlight 2 жыл бұрын

Appreciate you watching