Paul Wlaker still alive

Great video man it literally took me less then 15 minutes to do it all.

How deep did you dig the trench? Would 7” be ok?

That would not work in colder climates!!! It'll heave 100%!

What if you have some smaller and younger trees that you don’t want to drill a hole in. What would be a good alternative to attach to? I was thinking a Velcro strap all the way around the tree, that has a loop or hole for a carabiner. Thoughts?

what is the app or program you use to drag the corlored lines on the roof during the planning stage ?

Where can I hire u for this kind of flagstone work to get done on my front yard ? I live in Austin,TX

I came here wondering what type of attachments to thr trees would work but I got so much more including some laughs. Will we got to this extent? No. Did I watch the whole video? Yes. Thank you!

Mine are way out of hand. As tall as the highline wires and branches all the way to the ground there are two of them side-by-side one has dead branches and it is now almost June. I bought this older house in an acre of ground a year and a half ago and didn't really know what a crepe myrtle was. Should I wait till winter should I cut it all off about chest high and just deal with the knees. Help

Wow, that turned out great. I'm getting things ready to take on a similar project, replacing an existing walk.I will definitely be referencing back to this video several times over. The one issue I have is calculating the amount of flagstone I will need. I've asked the hardscape dealers, but they can never give a straight answer.

Love the setup looking to do something similar this looks way more busy effective

Subscribed. I realize this is 3 years old, but I hope you see this. I wished I'd seen you first. I nred help. We put in a Flagstone walkway (not on concrete) just dug and made sure we had a slope and reinforced on each side. We filled with sand and gravel. I'd say it's about and inch apart from Flagstone to Flagstone...problem is...the sand washed away as it rained. Please dont tell me I need to pull everything up and start over again.😢

Is it okay too cut the line when its plugged in, as long as you havent plugged the first strand in?

Very neat! quick quesiton, which method would you say is best? Mortar method or this one? why would people prefer DC method and not Mortar?

Thank you. Although I think I finally got it right, I now know more than I did before. I appreciate you!!!!!

Sirve también para afilar cuchillos o sólo para cuchillas de cirtadora de pasto?

Knew there would be a few Pablo's on the job HA

The “little bit extra” is damn right!

I really enjoyed your video and your tips. I'm just a homeowner who is planning on doing a small walkway from my porch to the driveway and I have never done anything like this before so it was a big help thank you

Just go to a junk yard and pull a factory brake controller out thats what i did

When i plugged it in (curt, with etrailer pigtail), and connected a 7 pin tester to my rear plug, the BK light was constantly on, instead of 12V...and nothing else came on when pressing the manual brake lever... What cpuld be the reasons? 2018 f150, all factory wiring (as far as i know)

Great Video! so there is no need for programing?

Im looking at pro stance 32 in used 80 hours at $5500. Do you recommend this mower

Thank you! This video is going to change the way I install my X-Más lights!

You have to put an expanded metal basket underneath the side of the truck to hold all fuel cans not inside the trailer and I would also take the truck to the Ziebart have him spray the entire inside with the liner that you put in a pick up truck bed if you pay for the professional it will last more than 20 years and then if you have a fuel spill you just put laundry detergent and a broom. hose it out?

For sale. Email [email protected] if interested. 38k miles, gas engine, $65k

First year starting a Christmas light business. How should we recruit and hire for such a short season?

Great video!❤. Hope to get into Christmas Light Service for next year! God bless❤

Will these go thru a 12’ high garage door?

how do you store your strips with ridge clips??? those clips hang up oneverything

Suggestion/Question for the power supply cord. Based on where your wall outlet is located, wouldn't it have been better to run the power cord straight up to where you put in that jumper and then power that one segment right-to-left across the garage, then go left-to-right for the rest of the roof line? Basically you would have been supplying power into the middle of the run instead of the end. Would have made the power cord run a lot shorter and less wire to hide.

I installed the oem ford one. Was cheap and easy. Program it using forscan keeping my truck looking original. But that a good 2nd option for those that can use forscan

I’m ordering from here for next year 🎉🎉🎉❤

Amazing!!

How would you hang “icicle” lights from a metal roof - “standing-seam”.

For adding connectors, could I use a male vampire connector mid wire to route another string in a different perpendicular direction?

Colorbond metal roofs r common in Australia my roof is tiled with metal guttering and few years ago i discovered magnetic hooks in bunnings which is a hardware shop, and it made putting up my Christmas lights up so much easier

Can you use sika flex on your joints

Such an incredibly helpful video! Thank you ❤

This video was very informative!! Thanks for sharing this with us 😊

Great job dad!

Wish this video was made beginning of the season but all good, thanks for the info.

Do you only have green wire?

Love the hat! Hochatown is one of my favorite places

Wow $736 for 200 feet of Shingle & Gutter Stringer Kit - Red & Warm White. These are truly expensive.

Im still upset that hes able to do this comfortably with sleeves pulled up 😂 meanwhile im traversing infinite layers of snow and ice. #maine

U need a professional KZfaq thumbnail designer?

This is all so brilliant! Ever since I discovered how good the $ is in this industry is I’ve known I have the potential to make a decent living off it! I’ll definitely be getting your course for next season!

I was to do a year round installation, would I want spt-2 lights? Or are they more for extended season use but not year round?