I built one similar some time back. There are some time and labor savings available. First off, hardwood 2x2 are not that much more expensive and the resulting labor saving are enormous as the cut is almost free of fraying so there is very little sanding. I cut mine on a table saw with finish blade and stacking on edge eight pieces at a time. I cut two big panels in a couple hours. Nice work you did there!

Good job on the video. Short, but detailed enough, and very nice narration.

this looks like a nice project for this summer. thanks for the inspiration

Just a thought... Stick a sanding disc onto your chop saw and add a tiny bit of pressure after the cut.. Cuts the sanding work in half. OR clamp all the blocks in a clamp (2 XxX boards and regular clamp) then sand all (or many) at a time.

I began to make plans to build one exactly this size in the past week. Looks great. Thanks for providing the pattern, that will come in handy.

Всё круто) но ведь перед созданием самого диффузора нужно же делать какой то замер звука в помещении, сам диффузор создаётся от самого помещения и не может подойти всем подряд

I'd recommend getting an oscillating spindle sander with a flat belt sanding option. Would make the sanding process go a lot faster and be a lot more ergonomic 🙂

Looks awesome! I'm thinking of trying this using 3d printing.

simple and effective, I like wood and I'm a musician, nice work, I'll do the same, thank you and all thumbs up

Hmmm very interesting and looks kinda cool too! Could you spray the stain on? Would save a ton of time and physical effort if that would work as well as the brush. Also thinking of how heavy this would be when completed. Could it be as effective with other materials that would be much lighter?

Great build!

Woa !! Impressive !!!

What was the final weight?

Whats the smallest size diffuser you can make to warrant it actually doing something. Ive got some scraps from my panel wall I built (thank you for guiding me through with your channel!!) And id love to put them to use!

Does it matter if you don't do a full section of the patten? Or do you make the size to ensure it has the exact pattern eg 4 full patterns across x 2 full patterns down. I hope that makes sense! These are awesome by the way, I make small things similar and stumbled across you when someone asked me if mine were sound diffusers! Learn something new every day!

Awesome

This looks really nice, I am going to try building one! Are there any issues with vibration between the diffuser and the wall? Such as the area that the lower spacer rests on the wall? Or is it heavy enough that it withstands it?

Wouldnt sanding the long lengths before cutting be a better idea? 🤔

How many 2x2x8s did you use to make it? Thanks!

Do you charge extra for the tung oil finish? If I was doing that project, it would certainly be finished with an hvlp sprayer and save hours of work!

it looks great man, i would love one too but dude that's a lot of work

This is awesome! Im a bit confused on the number of 2x2's. How long and how many?

If a kid pulls the diffuser forward, won't it fall off the cleat?

Naughty...... ....pine

great! How much does it weigh?

Brother, good effort, but you so know that you should be like 4 to 5 feet away from that diffuser to hear the effects. You never ever want it litreally right behind you like that. Completely wrong application

У кого есть схема расчетов ?

Men should never uptalk.

Awesome