This fireplace created the ambiance I wanted. Beautiful and stylish. I added a rustic mantle shelf above it and love the look

Looks good mate I'm sure I could do that with my little DIY skills so thanks for sharing.

Guess i just found my next weekend project! Great video.

That looks amazing 🤩

Nice looking project. Do you mind sharing what materials you used ie… 2x4’s, 2x3’s etc?

Just doing mine now, keep looking back at this video for references and can’t help but notice you look a lot calmer than me while your doing it haha !

Looks really good 👍 thanks for the information also

Great job. I have a small snug that i think this would work perfectly in. Off to order some timber and mdf i think. Thanks for sharing.

Hi, what sort of lighting down lights did you use? Looks awesome

this is awesome thank you for doing this i'm about to try this

Very nice. Quick question, I noticed you have carpet. Did you cut the carpet around so it sits on the floor or does it float on top of carpet (hidden by skirting)?

If you don't mind, I want to do this but where would you ideally have the sockets and the ones for the ethernet cable? And where would you locate the dvd player and router etc thanks

Hi, Thanks for the video. What depth would you recommend if building out from the chimney breast and not having a fire. So the media wall would just have a TV and possibly a sound-bar or shelf. Also what size timbers did you use. Thanks

Great video, I’ve built a media unit before but never fitted a fire, anything special needed? Fire board?

Sweet! I Love It...

Hey man thanks for your Video but I had a question what is the depth of the wood I mean the small piece of wood 9sentimator

Looks great, but can you still hear the TV ok after its boxed in, does it sound a little echoey?

Awesome man👍👍👍👍

did you attach fireplace with regular point or run a new 1500w line?

Looks awesome well done 💯

Well done ❤

Very nicely done. I have been pondering doing something similar myself, but incorporated into a larger project to I;corporate about 50 or maybe 100mm internal wall insulation on a cold North facing wall. I have been reluctant to do it because we have a really nice traditional fireplace and mantle (we never ever used the fire as 90% of the heat went straight up the external chimney). Just trying to get my head round the ‘order of battle’ and then biting the bullet of taking out the rather beautiful fireplace. I had to laugh at some of the rather childish comments some have made to your short video - you should give them their money back🤣 Thank you for sharing your approach with us.😀👍

Cool video good job

Awesome mate. We’re currently gutting our living room out and dot and dabbing all interior walls. Would you recommend boarding all walls first then build one of these? Or board the walls to it??

Hey man, thanks for sharing this video. Looking to create something like this in my living room. Where do you recommend getting the fireplace? Also what size do you recommend? Bearing in mind we’ve got a 50” TV. Any help would be greatly appreciated.

Beautiful job

Is that dot and dab and if so what fixings did you use Great work thanks for posting as I’m about to start this 🙏 oh and what bracket for tv 😂. It’s not as easy as it looks great. I like the way you recessed the tv and have the shelf inside 👍👍

Did you use 3x2 Cls timber 38mm by 63mm? Also can this timber take the weight of a 46kg fireplace installed for media wall?

I’ve just finished and passed me level 3 joinery and carpentry and can’t wait to go self employed and do little easy jobs like that this that pay so good for about 30mins/1 hour work amazing

What fireplace unit is that?

Great setup sir! Quick question, is the fireplace plugged into the socket or hard wired through mains?

Which fire is that you used please?

Just ordered our 50 inch fire this morning, I have anxiety over starting this ,seems like there is a lot of money to be saved it you can do yourself, is your framing timber 3x2

Great work, how many length of 3 x 2 do you use on a standard media wall?. Thanks

Great vid, a question though, with something like a games console that ideally needs to breathe and vent how would you tackle this?

Hi, what kind of wood do you recommend for this? Is there anywhere you recommend buying the wood from? Is that just plaster board too? I'm in the UK and wanting to do this in my front room ☺️

Great build mate. Is there any issues with the t.v. from the heat of the fire below ?

Hi pal. You've inspired me to give it a go 😬🤞 Is it just personal preference whether to use either plasterboard or mdf and is it a 20mm gap around the TV- top, bottom and sides? Cheers.

Impressed

Hello sir I need to ask questions about the dimensions, what should be a dimension between the sound bar and fireplace, and totals from the base?

Love this setup can I get the drawings for it plz

Hi man, great videos! How do you secure your media walls to the floor? Do you anchor them or just gripit? Worried about the DPC depth under finished floor level. Cheers! Stay safe.

As the fire is closed into the actual timber/boarding, where does the heat come from as it usually comes from the top of the fire. Looks really nice, mine has built in fire too but i don't use the heat source just the coal effect lighting.

Are those boards or drywall that you screwed on at the end as coverings? I’m gonna start my project soon and need to do something exactly like this. I have a 60 inch fireplace and a 75 inch tv. Any tips? I’m a beginner.

I had a question if there’s no studs behind sheet rock where we want the edges to be against the wall can we put some 2x6s in between both outer 2x4 and add another 2x6 overlapping each other and screwing those 2x6s on the inner studs to support the wall? I was able to screw top and bottom plates along with joists but I’m worried of it not supporting it since it doesn’t have those two 2x4s screwed on vertically besides top and bottom plate.

Soooooooooooooooooooooo much information on how to build a media wall

On another note, worst case scenario that your fire place breaks and need replacement, how do you go about? Will you have to take the entire media wall down to remove and replace it ?

Is it best to lay the stud directly over laminate or cut a section out of the laminate was to replaced down the line

Where u get the fire from mate?

Nice, how many pieces of wood did you used? And did you used 2X3 or 2X4

Do you have a materials list and plans for this? Thinking of building one at home and not sure how much space needs to be between the fireplace and tv.

Just wondering if you have the specs for this build

Wo nice amigo

Can you please share the type of woods you used like 3x2 etc? Not an expert and also trying to build something like this.

Nice

Quiero hacer uno así pero no se que medidas tienen los palos

Hey buddy. Planning on wall mounting my tv but the area I’m mounting it on is right above 2 sockets. Any ideas re easy mounting without hitting the cables?

I'd be lying upside doon watching that telly!

How much do you think this cost to do?

Looks really nice...I would've put cabinet doors on top for extra storage instead of closing it up..🥺

What tv bracket did you use?

Does the heat from the fireplace affect the TV in anyway?

Everyone makes it different on their own way. There isnt really a tutorial on this just an insight because every household, wall, material, tv size is different. But good video

How do you manage to plasterboard if you have a slot for sound bar

Where did you get the fireplace from mate

Looks great but the problem is ventilation for the tv. In time you will have to change the led strips sooner because of lack of ventilatio n.

Did you use 2x3?

Where can I get the instructions

Should you not get it plastered b4 fitting tv and fire ?

Zero Selfishness , thanks 👍

You can’t access your av equipment or electronic fireplace cord. This looks nice but how can you use it unless you just have decorative stuff on it?

How would u measure for the tv size

How many lengths of timber did you use?

what is the thikness of the plywood 1/2 or 5/8

Well done be great to get list of what and measurements not that we will all build same really appreciate your help

What is the general cost for media wall installation

We does the heat go?

Bead up and skim it bud👍

Where's the fireplace from?

How does the remote change the channel if sky box is hidden

What is the depth of that media wall?

Hello where are u based and how much do u charge?

Ir extender

So it does not go up to the celinnh?

What is the depth

How far did you kick it out off the wall

😮😮😮😮😮

Definitely should have taped and mudded that before showing it off..

Que medidas son ?? Las maderas

Where do order your fireplaces from?

How high off the floor is the fire

The televisions that are mounted above fire places etc have half the shelf life

Come build me one please . How much we looking at ?

nice song 🫵

Espero que no cambies de TV en los proximos 10 años 😂😂

Guess your waiting for the plaster

Now you have to take it all apart... Mud the Drywall... let it dry, sand it... sand it again... then again... paint it, let it dry lol or just leave it looking all unfinished and trashy like that. Just to hide a few Wires lol 🤟😏

Put the TV up way too high, that's how

Considering the type of questions asked in the comments, i think most of the people should hire a professional 😂 - Good job fella!

American build ..... oh my god !