Modern Living Room Design Part 1

Modern Living Room Design Part 1 | DIY Wood Slat Wall

Рет қаралды 1,527,893

Күн бұрын

This week I helped my friend tackle her living room with a vertical slat wall. It’s such an easy beginner project! Stay tuned for part 2!
Blog tutorial: hanashappyhome.com/accent-wal...
Tools used:
Affordable beginner saw: rstyle.me/+siWVtz-Z9kgGSA4_se...
Cordless Nail gun: rstyle.me/+CslQJlj3EEKqdaTx8d...
Jigsaw: rstyle.me/+TGhiBNuEQdWZGad7vY...
00:00 Intro
00:17 Inspiration
02:21 Slat wall installation
05:09 How to cut around outlets
07:11 Progress!

Пікірлер: 261

@imidzovic Жыл бұрын

I am surprised how many negative comments on this video... These people just wanted to show other people on the youtube how they did certain things.. You can like it, you can dislike it, you can skip it... Why so much hate? What's going on with the world?

@laurencedetilly6097 Жыл бұрын

I agree, she doesn't deserve the hate. It's a DIY, it's not meant to be professional. She's happy with what she did, she's proud, and if she changes her mind in a few years she'll be able to make something new easily.

@Hanasdiyhome Жыл бұрын

Thank you so much! That means a lot. Like you said, I wanted to help ppl if they want to do it in their home. You’re a shining star!

@Hanasdiyhome Жыл бұрын

Thank you Laurence! I def never implied I was a professional. And that’s the exact reason we didn’t use glue! Thanks for understanding

@ginogretry5160 Жыл бұрын

Keep on Hana, you are very talented 👏👏

@rogerash 11 ай бұрын

Looks awesome, keep up the good work.

@gabrielricardotacuenino9723 3 ай бұрын

Congrats guys you did a great job!

@yuvrajtomar2032 Жыл бұрын

Was looking for something similar for my bar.. thank you for making the video. Amazing effort.... and as usual great job. ❤️

@Hanasdiyhome Жыл бұрын

Thank you so much!! So excited for your project

@AtHomewithAshley Жыл бұрын

Hana! It turned out so good. I’m so inspired

@Hanasdiyhome Жыл бұрын

Thanks so much Ashley!! It’s an easy beginner level project

@The1nonlymaria 4 ай бұрын

Thank you! Getting ready to do mine

@Arlene_DOTK Ай бұрын

Great Job, its BEAUTIFUL 😍 ❤ I love the 2 accent options. Im looking to do something like this in my condo for my combo dining/living room.

@tamimgaber5225 5 ай бұрын

As an interior Designer i found it very beautiful and emazing work

@patricehollywood6014 Жыл бұрын

The idea is great. The construction is normally different. You would first apply a sheet of MDF or a board. Affix the board to the studs, sand and paint, then apply the slats. That way you can use glue and nails w/o damage to the wall and it will be a more permanent/secure application. A primer is crucial when painting with darker colors. Otherwise, Im super proud of the effort. 👏

@Hanasdiyhome Жыл бұрын

That’s a great idea too!! Thanks for the tip

@goatseatchili1817 Жыл бұрын

So you’re saying to like put a cross board screwed into the studs running horizontally and then attach the planks to that?

@aliyakeller2573 11 ай бұрын

Great tips.. thanks for sharing!

@joseluisperezjr3285 5 ай бұрын

This is really good especially for people with little to No tool experience... great job

@Hanasdiyhome 5 ай бұрын

I appreciate that! That’s who I am trying to help! Everyone should have their dream home

@madonnaoti5648 4 ай бұрын

Great job! I will follow your style to decorate my movie room. Thanks alot❤

@Hanasdiyhome 4 ай бұрын

This would be very cool in a movie room!!

@user-ec4ke2ls1w 5 ай бұрын

Amazing job 👌

@user-ie7xv4wr5p 8 күн бұрын

Great job!!!

@user-ch4qu1cl3g Ай бұрын

Great job! I will follow your style to decorate my movie room. Thanks alot

@Hanasdiyhome Ай бұрын

Amazing!! You’re so welcome!!

@scottward1001 6 ай бұрын

FairPlay to you fantastic job keep the good work up 👍

@Hanasdiyhome 5 ай бұрын

Thanks!!

@matthewfloyd2442 8 ай бұрын

Hi, loving some of your begginer advice as I'm going to start sharing all my cool stuff soon. My stuff that I think is cool anyway. Since I grabbed a little handful of your tips, thought it only fair to leave one for your propagation. This may very well be rife input, but it is a pretty simple technique for holding lighter-weight, non-structural materials to sheetrock like slats for instance. Works best with longer 16‐18gauge nails ( I always keep 2" loaded up). Shoot one at 11 o'clock and as close to the head of your 11 nail as possible, fire another at 1 o'clock. Kind of shooting a v away from yourself creating a pretty stable anchor. Obviously lots of people would say glue or caulk, but trying to blow and go on something this tedious saves lots of nails and is much much less permanent. Meaning if you need to make it be not, the pinholes to be filled are much less work than removing the glue and sheetrock/texture the glue takes with it.(usually requiring new rock all together) I do apologize, I have a strange condition where when I have simple thought i expel a massively prolix and windy, but gratuitous, thicket of a grapheme and phoneme amalgamate. See lol. I talk too much would be more concise

@Neetu_MakeUp_Bar 6 ай бұрын

Thanks for sharing useful information..now it's useful for my salon decor

@Hanasdiyhome 6 ай бұрын

That’s amazing!!! Good luck

@Amannullaa Жыл бұрын

Good Team Work.

@Hanasdiyhome Жыл бұрын

It’s so helpful to have a partner for DIY projects! They go much faster

@user-yp5jc6bn3l Ай бұрын

beautiful job thank you

@sidthekid87able 9 ай бұрын

Thank you for the video!!!! Copying this now!!!

@Hanasdiyhome 9 ай бұрын

Yes!!! Go for it!

@zaidprooklashari6640 10 ай бұрын

That was a very nice video very helpful

@fatohorror 10 ай бұрын

Amazing 👏

@christianlungungu7186 3 ай бұрын

I ' m learning on your vidéo. Amazing!

@courtneyallen2924 Ай бұрын

It's beautiful ❤

@davidmingollafernandez7513 4 ай бұрын

Gran trabajo!

@DIYHobbyandpassionchannel Жыл бұрын

Good work

@thulasizwegwamanda3944 Ай бұрын

Awesome 😎💯 work indeed in fact this is kinda high end well 🙂 done ✅

@foziaahmed4145 Жыл бұрын

Très bon travail. Bravo.

@juliafavaro7889 Жыл бұрын

Love it!!

@Hanasdiyhome Жыл бұрын

Glad you like it!

@fareehashehzad1841 4 ай бұрын

Put a planter and a hanging light over it in that corner as well 😍😍. Very Niceee ❤

@romekk3975 9 ай бұрын

Thinking about that second cutout for the outlet I suppose a chisel might be a good tool to carve it out as well.

@garyalcorn3831 Жыл бұрын

Great idea Hannah forget all the haters looking good 👍🏻

@Hanasdiyhome 11 ай бұрын

Thanks so much Gary!! Gotta be the bigger person ☺️

@0to100Journey 9 ай бұрын

Perfect🎉🎉

@JerryMacHomes 11 ай бұрын

Fantastic!!!! Did you upload part 2 yet?

@Hanasdiyhome 11 ай бұрын

Yes!! You can watch it here kzfaq.info/get/bejne/f8igatuSvNi0dJ8.html

@halimulupnar8595 Ай бұрын

Çok muhteşem olmuş çok başarılı

@sandiapillay9691 4 ай бұрын

Nice. I like it with a only few slats in 2 corners cause paint so nice. Shoudve left a little extra spacing around outlet for maintenence. Always maintenence lol.

@Hanasdiyhome 4 ай бұрын

Oops! Didn’t think of that. Noted for next time

@roadtoad919 Жыл бұрын

The first slat was installed "plumb" not "level". Plumb is vertical. Level is horizontal. This is a beautiful design.

@Hanasdiyhome Жыл бұрын

I’ll remember that. Still learning

@Mark-oy1wv 2 ай бұрын

So you’ve never misspoken before?? How ridiculous

@edwardtherrien1537 6 ай бұрын

They make adhesives you can caulk on the back of the wood for extra security on the wall

@Hanasdiyhome 6 ай бұрын

We didn’t want to use glue in case we change our mind a few years ago. It would be hard to repair the drywall damage

@nazmeernstzen9759 5 ай бұрын

Don't worry about negativity make every situation educational we all learn from mistakes

@carlclappison3058 Жыл бұрын

Are you concerned that brad nails won't keep the slats from warping with changes in humidity? Did you consider using a backer board and screwing from behind to provide more ridgity and would be interested to know why or why not? Thank you!

@Hanasdiyhome Жыл бұрын

Hi Carl! This has been up for 4 months and there’s no issues yet. Since we did a geometric design in the other side of the wall, we wanted the slats to be as close to the wall as possible. I guess you could do the backer board depending on your environment.

@heroofnow1 11 ай бұрын

Wondering what you would think about this method but in a partially underground basement? We are thinking of doing a single wall like this but attaching it to MDF/Plywood, then attaching that panel to cinderblock walls. How would we attach the slats to allow them not to warp with humidty?

@TrashyLobster 5 ай бұрын

It’s inside. No humidity issues. That’s what an air conditioner is for.

@albertino4631 9 ай бұрын

Lovely video thanks a lot Just a question Which type of wood bars did you use, I know that pine wood will deform with the time Mabye could you help me

@Hanasdiyhome 9 ай бұрын

Hey! We used poplar wood

@ericsandoval2901 11 ай бұрын

Hola que marca es la pistola de clavos qué utilizo? Es muy hermoso el trabajo que realizaron saludos desde chile 🇨🇱

@af612 Жыл бұрын

What size slats? Maybe I missed to sizing. It turned out amazing. Good job. I want to do this on a bathroom ceiling.

@Hanasdiyhome Жыл бұрын

They are 1x2 cut to the length we needed

@af612 Жыл бұрын

@@Hanasdiyhome thank u

@TaylorL-du4ho Жыл бұрын

Looks great! How well do the brad nails hold in the drywall without hitting a stud?

@Hanasdiyhome Жыл бұрын

Hi Taylor. Good question. We nailed them in an angle so they criss cross (like an x formation) so they are holding well. This helps to anchor nails when there is no stud. Also, No one is pulling them so I don’t anticipate any problems!

@TheOffroader7458 4 ай бұрын

Looking like a hotel

@Hanasdiyhome 4 ай бұрын

That’s an awesome compliment 🥰

@uppyoldskool6652 8 ай бұрын

Great video only one thing... i would have got new outlet box's fitted so that the face could have been fitted on top of the wood to give it a better finish

@StevenJenkins-cc6ng 8 ай бұрын

Same thought. They sell extenders that would have brought that box back to where they needed it

@ashcherbakov5937 4 ай бұрын

Этот гвоздезабивной пистолет стоит, как весь ремонт в моей квартире))

@anonymousanonymous5327 Жыл бұрын

you fired a brad nail into the wall around the socket... without checking the orientation of the cables? how were you sure you didnt or were not going to penetrate the cables???

@Hanasdiyhome Жыл бұрын

I don’t think we nailed right around the outlet just in case.

@patrol2omega Ай бұрын

Hi, what is the name of that yellow machine used for the slat wall installation?

@joelkuhn5704 Жыл бұрын

Did you have to do any repair to the bottom of the (wood slate side) wall after removing the baseboard?

@Hanasdiyhome Жыл бұрын

That depends on your builder hahaha. If they did a good job, then no. But you may have to add some wood filler to clean it and patch it up if it’s unsightly

@merveillekabala6375 Ай бұрын

What is the color of the paint? Beautiful job❤

@shineed9747 Жыл бұрын

Wooden houses in America saying hello to hurricanes haha

@rkhrd3211 Жыл бұрын

You can connect the vacuum directly to the saw by the way ;-)

@Hanasdiyhome Жыл бұрын

You’re right!! Miss in our part

@adell.akbari Жыл бұрын

👏👏👏

@Hanasdiyhome Жыл бұрын

Thanks so much!!

@grahamnash904 Жыл бұрын

I would have glued the slates. Brad nails will never stay in place long term on a plastered wall when your not hitting the studs. Other than that it looks great . Good job

@Hanasdiyhome Жыл бұрын

The issue with glue is removing them. If you get tired of the design, you’ll have to do a lot of drywall repair. With brad nails it’s just a couple holes to patch if you remove them

@somtingwongwai7194 Жыл бұрын

@@Hanasdiyhome that's why they make proper slat wall channels and concealed covers, you don't see anything and screws are used as fixings

@idalidb1486 6 ай бұрын

i love it! where is the second part?

@rikiship62 Жыл бұрын

Did you not risk hitting any wiring with the nail gun near the wall sockets?

@Hanasdiyhome Жыл бұрын

We aren’t using very long nails and tried to nail at the top and bottom where there is less chance of any wires. You can also get a stud finder that detects electrical too if your concerned about it!

@user-wr5xc6mj5t 8 ай бұрын

Hello Hana, what are the studs sizes and where did you bought them ?

@Hanasdiyhome 7 ай бұрын

They are 1x2 poplar

@MannExclusive18 Жыл бұрын

What’s the divider piece you’re using to keep them divided while nailing

@Hanasdiyhome Жыл бұрын

Hey Devionne! It’s actually the same piece of wood, but we flipped it on the short edge. You can use anything but we liked a smaller gap than the width of the board.

@soarebv Жыл бұрын

👍👍

@user-dl3uj6ry9w 2 ай бұрын

Did you use wood that was already cut, for the slat wall? I am doing this under my house instead of lattice. I am trying to figure out what would to use.

@Hanasdiyhome 2 ай бұрын

They were already cut into 1x2 strips. Then we had the hardware store cut then to the height of the wall to make it easier for us.

@aalju5281 9 ай бұрын

Hey tell me pls what was colour code by ral?

@Gnafo 11 ай бұрын

hello a question is your wall in wood? my wall is in concrete the nail gun is not good? thanks

@Hanasdiyhome 11 ай бұрын

No you will need to use a hammer drill, concrete screws and a masonry drill bit. Tbh it’s really hard to drill into concrete for this many slat

@incity365 Жыл бұрын

do you have a color code for the paint you used on the wall?

@Hanasdiyhome Жыл бұрын

It’s by Sherwin Williams. It’s called cyber space

@davidmarino9009 Жыл бұрын

Level is horizontal….plumb is vertical.

@Hanasdiyhome Жыл бұрын

Thanks for tip! Didn’t know that

@zamaskowanyposlad1926 2 ай бұрын

And beans are on toast.

@khalidfahmi1559 Жыл бұрын

Sory .. what machine you used to joint a wood and wall ?

@Hanasdiyhome Жыл бұрын

It’s a nail gun. It’s linked in the description box.

@avraam6328 Ай бұрын

Can you tell me the wall paint color and paint brand? It's stunning!

@Hanasdiyhome Ай бұрын

It’s cyberspace by SW

@stephanemoquin3888 Жыл бұрын

What kind of wood did you use? How far the distance between the slats ??

@Hanasdiyhome Жыл бұрын

It’s 1x2 poplar. We used the same board as a spacer but flipped on its side

@parfaitfurnishing4007 6 ай бұрын

Weldone

@Hanasdiyhome 6 ай бұрын

Thank you!! We love it

@JohnSmith-rp7bc Ай бұрын

Those pieces of wood, at 2400mm long, cost around £4 each. It’d be cheaper to get the ready made slats on felt

@eirhnhnxou 5 ай бұрын

Ηi could you write me here in the comments what is the name of this yellow machine that you nailed to the wall? Thanks

@Hanasdiyhome 5 ай бұрын

It’s a brad nailer

@raghuZanne 5 ай бұрын

Great ideas. But was painful to watch. Do you think the drywall will hold the slats forever?

@Hanasdiyhome 5 ай бұрын

It’s been a year and there’s been no issues at all. So yes. I do

@sandiapillay9691 4 ай бұрын

😂 why painful to watch? It was fun to watch

@raghuZanne 4 ай бұрын

@@sandiapillay9691 drilling nails into drywall will be ok for a very short time or as long as the slats are it disturbed I guess. They are not secured properly in the video I think. But OP said they have been fine for over an year so 🤷‍♂️

@Sky-blueteam 3 ай бұрын

What kind of wood and what is the slates dimensions. Great Video 😊

@Hanasdiyhome 3 ай бұрын

This is 1x2 poplar!

@Sky-blueteam 3 ай бұрын

Thank you 😊

@arkatverse Жыл бұрын

Good job, is that a concrete, brick or gypsum wall that you installed the slats on?

@Hanasdiyhome Жыл бұрын

Thank you. This is a standard home in Toronto area. It has wood framing and drywall on top.

@kelvinabel2244 10 ай бұрын

@@Hanasdiyhome you are beautiful

@ijeshwardhillon4927 7 ай бұрын

What's the end song?

@nadiasubhani5839 9 ай бұрын

Hi how do you use the nail gun apart from pressing on it

@Hanasdiyhome 9 ай бұрын

You press it against the wall and then pull the trigger! You can practice on scrap wood before you try it on the wall

@3rdtwirl494 5 ай бұрын

What’s the color spec of that paint

@vadimplesca2862 7 ай бұрын

Where did you purchase the slats?

@Hanasdiyhome 7 ай бұрын

Any hardware store should have them. They are 1x2 poplar wood

@Criscakes2000 Жыл бұрын

What size slats are those and where do I buy them

@Hanasdiyhome Жыл бұрын

They are 1x2. If you have 8ft ceilings or less then just get them at a regular hardware store like Home Depot or Lowe’s. These are 9ft and so we got them from a specialty store in our area. This is poplar wood.

@Criscakes2000 Жыл бұрын

I loved what y’all did. I’m going yo try it. Thanks ❤️

@guillaume_lm Жыл бұрын

what's model RIOBY used ?

@Hanasdiyhome Жыл бұрын

Hey! All the tools are linked in the description box!

@vickyzhang2367 11 ай бұрын

Where did you buy the wood?

@Hanasdiyhome 11 ай бұрын

This is from Tamarak hardware store

@unathimlokoti1033 Жыл бұрын

I'm gonna try it for sure,what kind of wood u using ?

@Hanasdiyhome Жыл бұрын

This is 1x2 poplar which is a bit nicer than pine but you can use pine too!!

@michaelsmith8049 8 ай бұрын

What color walls?

@asepnurhamidin8498 2 ай бұрын

Mau tanya ka itu vinylnya habis brpa.?

@sumeshsivsankar548 Жыл бұрын

What was the wood you used as slat. Can you let me know.

@Hanasdiyhome Жыл бұрын

Yes. We used poplar. But you can also pine which is a bit cheaper

@doc.g7 Жыл бұрын

@@Hanasdiyhome Did you rip the boards to desired width? Or are they 1x2x8? I want to do this and you have inspired me 😊

@danfleury6769 3 ай бұрын

Hi, what sealant did you use please?

@Hanasdiyhome 3 ай бұрын

Polyurethane

@anuragsingh975 Жыл бұрын

What is the height floor to slab?

@Hanasdiyhome Жыл бұрын

The ceiling is 9ft, so we had to get the boards at a specialty lumber shop

@Militarypedia5 9 ай бұрын

Can you please help me with the color 🎨 code? 😊

@stevest.pierre8515 Жыл бұрын

Looks good. And the actual retail price is…..? Welcome to Canada 12$ per slat

@Hanasdiyhome Жыл бұрын

Haha yea. And this is poplar so it was more 🤪

@oceejay5148 Жыл бұрын

Hi where did you buy the slat woods ?

@Hanasdiyhome Жыл бұрын

Hi we are in the GTA so they are form Tamarak

@skill9705 8 ай бұрын

Gg I am doing the same in my house! 😊👍

@Hanasdiyhome 8 ай бұрын

Yes!! I’m so excited for you!!

@TimCBuilders Жыл бұрын

Don't you need glue? That stuff is going to walk all over the house as it goes thru the seasons.

@mitzkovi1 7 ай бұрын

Did your friends get sick at the end?

@Hanasdiyhome 7 ай бұрын

Nope!!

@PeterMurder Жыл бұрын

Prolly should have back caulked or liquid nailed them.

@Hanasdiyhome Жыл бұрын

We didn’t want to have to tear down drywall if they get sick and tired of it.

@PeterMurder Жыл бұрын

@@Hanasdiyhome your gonna mess up the drywall regardless. But ya less fixes. Just thought it was attached a bit light for the amount of work put into.but ya your not wrong.

@mhalakatti2004 Ай бұрын

Don't you glue the slat to the wall, I see you are just nailing them ?

@mastygaming5397 3 ай бұрын

What is this couler code

@Hanasdiyhome 3 ай бұрын

It’s cyberspace by SW

@techmasterroro4807 Жыл бұрын

outlets should have been sat on top of the slats for clean look

@Hanasdiyhome Жыл бұрын

They could have been but this is easier and looks great

@niwagabapetit5149 Жыл бұрын

Name of the machine please

@Hanasdiyhome Жыл бұрын

Hi! The tools are linked in the description box.

@mariliacoelho2942 8 ай бұрын

🤔😍😍😍👌💯🙏💃🤗

@eyobtamiru5465 Жыл бұрын

please tell us slat dimension

@Hanasdiyhome Жыл бұрын

1x2 slats cut to the height of the wall

@TheKurfer Жыл бұрын

@@Hanasdiyhome This looks fantastic! Where did you get the slats? Is this just simple wood lumber from a big box store?

@Hanasdiyhome Жыл бұрын

@@TheKurfer Hi Chris. These are poplar. You might be able to get them from a hardware store but typically you will find pine in the same dimensions at Home Depot or Lowe’s. Poplar is a bit more expensive but the wood grain is really much more beautiful and it can be found at a more specialty hardware store.