HOW To Build A PC/Workstation for Creators 2021 [Part 1 - "Hardware"]

HOW To Build A PC/Workstation for Creators 2021 [Part 1 - "Hardware"] | Ryzen 5900x + RTX3070 Vision

Рет қаралды 119,644

Күн бұрын

In this video I'm showing you how to build a BEAST of a PC/Workstation for creators. We're focusing on the hardware and it's part 3.1 of the build series. In part 3.2 we're setting up the software and you can find a link below.
▶Get 2 Months for FREE when joining Artlist/Artgrid below◀
Music & SFX Licensing Site: geni.us/TNartlist
Stock Footage Site: geni.us/TNartgrid
PC Specs/ Parts used for the build:
[All 'geni.us' links below redirect to Amazon and earn commissions]
✅CPU: geni.us/nyQ25
✅COOLER: geni.us/7rxn
✅MOTHERBOARD: geni.us/Vrr0yJB
In the future use this MOBO [Gigabyte b550 Vision D-P] if available: geni.us/j1BwVL
✅RAM: geni.us/ujMh
❌This RAM didn't work for me: geni.us/AgFn0
✅OS SSD: geni.us/AeJfgn
✅PROJECT DRIVE: geni.us/3eVX7
✅GPU: geni.us/WmBXAb
✅I Ended up using this Sag Support Bracket as well: geni.us/BKhBnVd
✅Case front panel USB-C port PCIE card: geni.us/KQLN
✅PSU: geni.us/Q2sQ
✅PSU Extension Cables: geni.us/bz20Ah5
✅CASE: geni.us/bsAf
✅Extra Fans 4 the Case: geni.us/d6cJ
USEFUL Tools for the build:
➡ iFixit tool kit - geni.us/aADsVVc
➡ Anti-static Wrist band - geni.us/l1cf
➡ Extra thermal Paste - geni.us/hJgin4U
Part 1: Review & Benchmarks: • Good-bye APPLE! Best-B...
Part 2: Why I Chose those parts:
Par 3.2: Setting up the Hardware: • HOW To Build A PC/Work...
0:00 Cuteness
0:30 Important Notices
2:53 Artlist Sponsored Segment
4:09 How to ground/earth yourself?
5:16 Prepping Motherboard & G
7:15 CPU Installation
9:23 SSD Installation (2x)
14:15 RAM Installation
15:58 AIO (CPU COOLER) Installation
27:57 Preparing the CASE
30:10 Installing Motherboard to the CASE
33:30 AIO to the Case
36:55 GPU Installation
38:27 AIO Cable Management and Installation
40:30 Front Pannel USB-C PCIe Card Installation
41:50 PSU Extension Cables
44:42 Cable Management 1.0
45:51 PSU Installation
50:20 24-Pin ATX Cable Install
50:55 CPU Power Cable Install
51:35 SATA Power Cables Install
53:25 Front Panel USB-C Connector Install
54:40 Case Front Panel Cable Connections
58:20 Front Panel USB-A 3.2 cable connetion
59:21 GPU Power cables install 1.0
59:28 Daddy time
1:00:51 GPU Power Cable install 2.0
1:02:54 Included Case Fans Cable Install
1:03:34 AIO Fan Cables Install [CPU Fan]
1:04:10 AIO RGB Cable Install
1:06:32 Extra Case Fans Installation
1:08:05 Cable Management 2.0
1:08:20 DOUBLE CHECK & PLUG IN THE POWER
My Go-to Online Store:
geni.us/Iw6nZ - (Amazon) Paid Link*
Want me to check out some tech or interested in collaborating?
email me: thetechnotice@gmail.com
FB: / thetechnotice
#WorkstationBUILD2021 #workstation2021 #PC4Creators #BEAST
Video produced by Lauri Pesur
-------------------------------------------------------------------------------------------------------------
GEAR USED IN THIS VIDEO:
[All 'geni.us' links below redirect to Amazon and earn commissions]
AUDIO:
-The Recorder + Mic I Use: geni.us/tscmdr-10l
-The $20 Camera Shotgun Mic I use: geni.us/takstar
-The Tie/Lapel Mic That I also use: geni.us/smrtlav
You also need this for the tie mic: geni.us/sc3adt
-My Main Headphones [CHEAP]: geni.us/dzv7Q
-Best cheap Rechargeable Batteries: geni.us/oQHyx9T
VIDEO:
-B-roll Camera: geni.us/56576C
-I still use my old workhorse camera: geni.us/P3oCxj
-NEW workhorse beast camera: geni.us/ibuU
-Main Lens That Gets All Blur: geni.us/k09oA
-The Wide Angle beast: geni.us/9KfCwy
-Most reliable SD Cards in the world: geni.us/QMxxBnu
STABILISATION:
-My NEW even cheaper Favourite Tripod: geni.us/fcXt
-The Fluid Head on my tripod for smooth b-roll: geni.us/lhcJV
-And my Main tripod [cheap as!]: geni.us/oBNG
LIGHTS:
-Main Fill Light: geni.us/qTbE
-The small light I use for fill light: geni.us/hlEr
-The Fire effect light: geni.us/GX5KA
-Best Ringlight to buy: geni.us/dUS9
-My Fav Cheap 3pack LED Video Lights: geni.us/B39oL
-Favourite Portable RGB: geni.us/dEqXW
OTHER:
-Favourite camera Monitor w LUT: geni.us/tecUD
-I get my music here:
▶Get 2 Months for FREE when joining Artlist/Artgrid below◀
Music & SFX Licensing Site: geni.us/TNartlist
Stock Footage Site: geni.us/TNartgrid
DISCLAIMER: I have to state that some of the links on this channel are affiliate links which means by clicking on them and purchasing the items I get a small commission. I'm part of an Amazon Affiliate and earn revenue from qualifying purchases.
[Paid Link*] Means that by clicking on the link and purchasing from the shop I'll earn commission from Amazon or other site(s). This does NOT change the price for you.

Пікірлер: 254

@aryankarimi5798 2 жыл бұрын

best part of this video is "I'm not gonna touch anything" 😂 so cute

@vincentmessier2830 2 жыл бұрын

Thanks to you mate, with the help of this video I had the courage to built my first computer! I had a couple of hiccups but in the end everything is working perfectly! Would not have happen without this video!

@rfguys2206 2 жыл бұрын

Best instruction on PC build. I just built the first pc in my life following your video step by step. Bought the same case, CPU, AIO and extension cable. Luckily the motherboard and PSU are similar to what you had in the video.

@experience5863 2 жыл бұрын

Just finished the build - its a wonderful setup and it performs brilliant. Quiet honest, you helped me a lot with your videos and I felt comfortable to build it due to the level of detail you provided :D - Cheers buddy

@theTechNotice 2 жыл бұрын

👍😉

@domingob.arteagagracia7286 3 жыл бұрын

I love the high quality of you videos, and the way you explain it..top🔝

@theTechNotice 3 жыл бұрын

I appreciate that!

@aarondaaaooo 3 жыл бұрын

Thank you so much for this straightforward tutorial! This is such a help for beginners. 👏

@theTechNotice 3 жыл бұрын

You're so welcome!

@JW1977x 3 жыл бұрын

Thank you for the amazing and informative video! I’m looking to build my first pc near summer, a workstation that keeps gaming in mind, this will definitely help out :)

@theTechNotice 3 жыл бұрын

👍

@justdoitevelson 2 жыл бұрын

Thankyou very much for the hard work and dedication you've put into this video and work. Really appreciated !

@QualityVideoService 3 жыл бұрын

Always a pleasure watching.

@dunnedom Жыл бұрын

Appreciate your videos! They've all been so helpful.

@VedaFilmCompany 2 жыл бұрын

Thank you for this. Although I picked different parts, this was really helpful in building my first diy pc

@theTechNotice 2 жыл бұрын

No problem!

@michaelray1037 2 жыл бұрын

You are the most valuable resource for my video editing computer build!! THANK YOUUUU!! 🙏

@theTechNotice 2 жыл бұрын

😉👍

@siemprepalante773 2 жыл бұрын

Great vid. A perfect example of play-by-play. Awesome job. Thanks.

@theTechNotice 2 жыл бұрын

😇

@shahidrafiq6401 3 жыл бұрын

Thanks been waiting for this

@theTechNotice 3 жыл бұрын

😉👍

@state3210 2 жыл бұрын

Awesome video! On your next “How to build” could you explain why you picked that particular hardware? Like why you picked the 700w power supply? How much power is right for your build? What makes that motherboard your choice? Etc. Since I’m a beginner builder and still learning. Thank you for posting these kind of video

@theTechNotice 2 жыл бұрын

I've got that video already made, check out the other videos in this build series ;)

@larryhogston7970 3 жыл бұрын

Absolutely amazing videos. I've almost got my PC built using the D-P motherboard; I'm awaiting the cooler. I went ahead and assembled everything else. I don't think there will be too much trouble installing the cooler with the motherboard in place. I didn't use the extension cables and it worked out great. I do have a question. There are two thermistor cables in the box with the motherboard. Do they need to be connected? If so, where do you run the wires? It had been many years since I built my last computer. These videos made it very easy. Thanks again.

@oceaniafilms6278 3 жыл бұрын

Thanks for sharing your PC build! I absolutely love it!! If I'm editing my videos off a G-Raid with thunderbolt 3 cable, what kind of alternative I can get for my motherboard?

@ConstantThrowing 3 жыл бұрын

Just had a boy (my first child) and it was cool to see you and your boy at the start. I've got so much to look forward to! So awesome ❤

@theTechNotice 3 жыл бұрын

👍😍

@_Juizyy_ 2 жыл бұрын

Congratulations! 🎉🎉🎉🎉🎉

@ESSECIFILMPRO 3 жыл бұрын

What a great workstation builder helper

@denisj32 3 жыл бұрын

amazing you do so grate video with small parts of every component EXCELLENT

@theTechNotice 3 жыл бұрын

🙏😉

@MarcusMeece 2 ай бұрын

Good to see your son is your pride an joy also thanks for the killer info !!!😊

@johnpuckett6383 2 жыл бұрын

Nice full tutorial. Even the equipment you used to do the tutorial.

@shivaypatel780 10 ай бұрын

Real educational 😊

@mannyfresh7065 2 жыл бұрын

Wow never knew iFixIt kit back of the case can hold screws! Just got my Vision DP and swapping out my parts and watched this as a refresher! Very good guide!

@olavoboamorte7445 2 жыл бұрын

Tech. Thank you very much for the whole content that you share with us. Following your videos I am feeling confident to give a try on anything I see from you, because your explanations are soo detailed. Just on question. I am just building my own PC now and I am using the MSI B550 Unify following your last comparison from 3 motherboards and how amazing this motherboard is. Can you please just tell me if with this motherboard I still need to buy a PCIE card like you bought for this built, or with the MSI B550 Unify is not necessary? Once again. Thanks a lot!!

@ericg9107 3 жыл бұрын

I got the same board and GPU but a 5800x. It's a beast and runs everything I want. I'm very happy

@wecreatestories9419 3 жыл бұрын

Mate, you are awesome! I trust your thinking process and even though I'm a geek in researching and analyzing I just don't have the time to dedicate anymore. I wish there were more genuine KZfaqrs out there just like you without biased "sponsored" views. I was a huge apple addict for the last 10 years and to be honest, the osX experience is just stunning comparing to windows. You are right, the price of macs are not justified anymore. Since Jobs died and the introduction of touch bars in MBP's and gold colours in iPhones, it feels like the brand took a very different path. Also dropping the support on Cuda in their products was a kick under the belt for creatives that we put our trust in Apple. The reason why this week I start building my own rig. Pretty hard with the shortage of GPU's and no rains in Taiwan. Again, thank you for existing. I love watching you and you should have your Patreon page as well !

@theTechNotice 3 жыл бұрын

Thanks for this awesome comment! 🙏

@wecreatestories9419 3 жыл бұрын

@@theTechNotice So i built the same one, except i went with Rtx2060 until the craziness on prices stops, as well with different Memory (Hyper-X 2x32). My only concern is that sometimes when pc goes in sleep mode, feels like pc is off but the light on the water cooler stays and cant wake up with keyboard, only if i keep pressed the off button on the case. Keyboard wakeup computer is checked in settings. Any clue?

@Rood67 3 жыл бұрын

Excellent video; and great build instruction. Best way I’ve seen someone deal with installing an AIO. Even if this wasn’t a great video on it’s own; the interaction with your son was worth the time to watch. You have links to all the computer parts, but not one for that amazing shirt. 😊

@theTechNotice 3 жыл бұрын

My brother left the shirt top in my house when he lived with us for a bit and I've just claimed it as my own. No idea where that's from haha :)

@Rood67 3 жыл бұрын

@@theTechNotice just my luck. In the US, this style shirt with a pocket can be found with enough hunting. They are just not common.

@zachlemon4935 2 жыл бұрын

That intro was precious my guy :)

@daledietrich2715 3 жыл бұрын

Thank you. If you could build this again would you be using the Asus ProArt B550 Creator? I think I'll be building basically the same rig with the ProArt and the Ryzen 9 3900XT. Your videos have been EXTREMELY useful!

@mahdikh4821 3 жыл бұрын

It was suuuper helpful thank you

@theTechNotice 3 жыл бұрын

😇

@MichaelJohnson-sg9by 3 жыл бұрын

This step-by-step video guide on how to build this workstation convinced me to give it a try. I followed your build instructions exactly - down to cable management - and everything worked! The pc is blazing fast! I decided to hold off on buying the gpu until prices come down. (In the meantime, I am using a gpu scavenged from a previous system.) Any recommendations on a sound card? Or do you recommend using the onboard audio?

@theTechNotice 3 жыл бұрын

Thanks, glad to hear that. The onboard audio is completely fine ;)

@DruMUSIC06 2 жыл бұрын

That build tho... Ooooh satisfaction!

@theTechNotice 2 жыл бұрын

😇

@robertsaca3512 2 жыл бұрын

My latest build had the power supply outside of the case, bolted to the back in a seperate small housing with a small quiet fan. Never seen it like this before, it's apparently to remove the heat generated by the power supply from the inside of the case completely.

@buza972 2 жыл бұрын

Hey i have a question about the AIO connectors. In particular, why did you connect the pump to the CPU_FAN slot if the mobo has a dedicated CPU_OPT (Water cooling CPU fan header) slot on it that the manufacturers stated it's for the pump? Or maybe attach the pump to SYS_FAN5/6_PUMP? I'm just asking because in the manuals they state these ports offer speed control for a water cooling pump. What's the advantage of attaching the pump to the CPU_FAN slot?

@benjammin9833 3 жыл бұрын

I'm thankfull you mentioned the B550 Vision D-P because I got my hands on it and now I don't have to suffer from a blind USB-C :D

@theTechNotice 3 жыл бұрын

👍😉

@jcvargas85 3 жыл бұрын

Thank you so much for doing a step-by-step video on a workstation for creators!! Most of the videos I've found are for gaming but this video is exactly what I was looking for!

@alexanderunknown8605 2 жыл бұрын

LMFAO, A PC IS PC, there is difference in SERVER, but PC is PC whatever you use it for lol.

@roshan2529 3 жыл бұрын

Hi, can this be done with the corsair 4000d airflow.. will the top radiator fit correctly.. also whats your thought on x570 (msi meg tomahawk wifi ) since the B550 vision d is almost 100 dollars more expensive where i am.

@richardwulf1382 3 жыл бұрын

ty so much, helps a lot !!!

@theTechNotice 3 жыл бұрын

👍🙂

@krzysztofdeoniziak5618 2 жыл бұрын

Thanks to your video, I put together a PC for the first time without having a heart attack on the first boot, i.e. it started on the first try

@rendertank897 2 жыл бұрын

Great channel! Not enough high end creator / builders on PCs out there. Too many designers, editors, VFX artists and animators are afraid to leave the Mac ecosystem. Do you mess with Macs too?

@snackiehillman Жыл бұрын

Hi and thanks for your helpful videos. I have no experience but I'm going to try this build or something close to it. Question-I would like to use my current monitor that has a VGA connector and USB, will this monitor run off the GIGABYTE Z690 AERO? Thanks?

@Wrecksy 3 жыл бұрын

Question: I'm thinking of building this (or similar), but I'm trying to decide if it's worth the extra $$ to get the better motherboard so I can have 2 of the faster SSDs. But I'm wondering if it would be fine to put the OS and apps on the slower (3GB/s) of the two and use the faster one for video footage. Would that not be a better usage of the speed? Or is it more important for apps to have faster access?

@mikenguyen191 3 жыл бұрын

Hi great video. I've been following along. Question about the PSU installation. Why did you out the psu fans facing upwards instead of facing down? Wouldn't it make sense to draw cold air from outside of the case to the psu instead of from inside of the case? Thanks

@theTechNotice 3 жыл бұрын

Good question! The truth is tit actually doesn't matter. I just wanted to draw the warm air from the case and blowing it out the back. Either way no performance difference :)

@kevinstarks5151 2 жыл бұрын

For video editing, is it best for the faster SSD to house the project files and scratch disk and then use the slower drive for the operating system and installed programs? 12:09

@R0B690 3 жыл бұрын

Did almost same but with ITX, looks amazing. Only annoying thing is no dedicated AIO pump header and no HD Audio Front Header...

@QualityVideoService 3 жыл бұрын

Question is the Asus ROG Strix 850W Gold PSU, Power Supply enough power to run my system?

@astasna 2 жыл бұрын

so LOVELY

@komyominhtet 3 жыл бұрын

woow...this is so amazing

@1docwebb729 3 жыл бұрын

Didn't see the approximate cost of the build. Looked through the comments. Good video thanks.

@celam1244 2 жыл бұрын

Hi! I'm getting ready to start my build, looking forward it! Quick question, when did you use the Sag Support Bracket, and why? Maybe I missed it in the video. (I'm also an extreme novice. I get that it's to support the graphics card, but was more wondering about placement, and when is a good time to install it.)

@theTechNotice 2 жыл бұрын

Install it at the very end, it's to counteract the pressure of the GOU pcie slot with longer GPUs that sag.

@tofbrink 3 жыл бұрын

Hi ! Thanks a lot for this perfect video. I have a question, i would like to buy components for the future computer of my wife. (She's filmmaker) And i'm hesitating between the gigabyte b550 vision and the Asus Rog Crosshair VIII Dark Hero. She wants a white build so the gigabyte is great for that, but the shop told me the asus is better, what do you think about that ? Sorry for my bad english, a french viewer who enjoys your work !

@Lakely.101 3 жыл бұрын

Great Quality Video

@theTechNotice 3 жыл бұрын

👌

@hiteshsahu_ 2 жыл бұрын

Have you seen any usb glitches in this build ? Many people have mentioned usb intermittent glitches with b550 and x570 I want to switch my old Intel system with a similar one in this video.

@viswa2k944 2 жыл бұрын

Best PC I have built my one with this spec. Aura Crate RGB controller not working does it cable issue

@amrocomic 2 жыл бұрын

THANK YOU PRO 👍

@jeffreylevans Жыл бұрын

Request how to set up multiple displays / monitors for high performance video editing using Premier Pro for example. Thanks

@jcinewilliams8819 3 жыл бұрын

Have you done a build specifically for Davinci Resolve. That would be great for Me. I'm currently looking at digital storm which is pricey. I'm thinking alot of their configuration they've suggested is more for looks than performance. I'm not a techy by any stretch; all I know is I like to have no less than 24 cores with 128 GB of Memory; 1TB OS drive and a comparable size 500 GB or more for a scratch and storage 10TB. Can you please demonstrate a stable build 🙏🏿 for me especially if I do not need to drop 10k. (I sure hope you can answer).

@BigTexGuitarz Жыл бұрын

I mean could just lay case down on it's back for CPU cooler install if mobo already installed

@tsitsichigumba 3 жыл бұрын

Hi, I really love this build but with no GPUs available can I swap out the CPU for one with an integrated GPU for now? Which one would you recommend keeping most of the rest the same? Then when GPUs are back I'll get one plus upgrade the CPU... or use the same??? Planning on using Premiere Pro and Davinci Resolve and not have rendering that takes days..

@theTechNotice 3 жыл бұрын

Great idea, the best cpu with Igpu for ryzen system is The 4750g available on eBay. :)

@burnbarrelnetwork4013 2 жыл бұрын

Glad I watched this. I thought I would update the bios after the processor was installed

@theTechNotice 2 жыл бұрын

Yes, you could do that if the MOBO supports the CPU, if not then use Qflash :)

@burnbarrelnetwork4013 2 жыл бұрын

@@theTechNotice exact mobo your using. Was gonna pull up your video on it again once I sit down to put everything together. Thx!

@dunnedom Жыл бұрын

Thanks!

@theTechNotice Жыл бұрын

Wow, thanks for your support! Super appreciated! 👌 😇👍

@mannyfresh7065 2 жыл бұрын

I didn’t see you take the tape off the Heatsink for the M.2 fyi

@irajnaghash 2 жыл бұрын

The fan rotates and the radiator vibrate therefore washer for screws is required. In some cases, power supply fans should be down and the case has a down outlet with a filter. Circulation of heat in the power supply has nothing to do with the case. It is possible to see RM750X up-down. I can see a filter under the power supply space.

@dhillibabup8548 2 жыл бұрын

Thanks for this information, kindly give the link to the part 2 of this video

@theTechNotice 2 жыл бұрын

In the description ;)

@dhillibabup8548 2 жыл бұрын

@@theTechNotice there is no link for part 2 of this video, it's missing

@craydogdog1530 2 жыл бұрын

Why didn't Patriot Viper 4 Blackout Series RAM work even though it's DDR4?

@factsoverfeelings5833 2 жыл бұрын

Thanks for sharing your knowledge brother. Would this exact build be ideal for music production too?

@theTechNotice 2 жыл бұрын

Yes, but the GPU would be an overkill if you do just music production. Go for something much lower! :)

@factsoverfeelings5833 2 жыл бұрын

@@theTechNotice Dam brother you replied in less than 5 minutes. You are GOLD! Which GPU do you recommend for (music recording & editing, and some video editing too for the songs. No gaming.)

@jillianale1630 Жыл бұрын

How and where do I plug in the Wi-Fi for this board?

@samiullahsabir3188 3 жыл бұрын

Great video I always watch your video because you do builds for Creators which is I am, and I am waiting for the vision dp I will buy it, thanks

@theTechNotice 3 жыл бұрын

👍😉

@user-xn2fd8ht7m 3 жыл бұрын

do you just skip the first sata cable installation at 51:40 if you have the vision d-p motherboard??

@mikenguyen191 3 жыл бұрын

Yes he mentions that you don't need to if you have the revised version which is the vision d-p

@Teluric2 2 жыл бұрын

Whats the performance benefit of going from 16 to 32 cores or 32 cores to 64?

@daledietrich2715 3 жыл бұрын

I don't understand the point of the extender cables? Aren't the cables that come with the power supply long enough to reach through the case to the relevant mobo and gpu power headers? Is this just for esthetics or will I need to buy extender cables too?

@theTechNotice 3 жыл бұрын

99% esthetics 1% practically longer and better reach.

@boblyon2982 2 жыл бұрын

Great sequence of video, the boy is cute indeed...Have a question however, Wanted to change the ram...Would G.Skill Trident Z NEO Series 128GB (4 x 32GB) 288-Pin SDRAM PC4-28800 DDR4 3600 CL18-22-22-42 1.35V Quad Channel Desktop Memory Model F4-3600C18Q-128GTZN work well in this setup..I know it is compatible for the x570 mother board...wondering if it would work on the 550DP...thanks much obliged for your input ... will be waiting for it!

@theorganicveilradio6623 3 жыл бұрын

OMG, your son is your mini-me. What a doll....sorry its a mom thing....lol......lovely pc too! In the process of building a new machine...3950x, yada yada......GREAT WORK sir!!! Love your show!

@theTechNotice 3 жыл бұрын

🥰👍

@exotic_playz8640 3 жыл бұрын

building mine soon!

@theTechNotice 3 жыл бұрын

👍

@EdRovera 3 жыл бұрын

Which Gigabyte GPU did you use? Amazon link goes to all Gigabyte vision 3070 GPUs. Same question on your extension cables. Thank you!

@theTechNotice 2 жыл бұрын

Used the Gigabyte 3070 Vision GPU, there's only one of those :)

@flashytincan 2 жыл бұрын

Thanks for the build! I don't know much about computer building, but if I followed this build and used a rtx 3080 instead, would it still work? I'm thinking of doing this build (for Blender and Unreal Engine purposes), but instead switching out the gpu for the 3080 and the CPU for a 5950x.

@theTechNotice 2 жыл бұрын

Yes it would! :)

@flashytincan 2 жыл бұрын

@@theTechNotice Thank you!

@lew.parker 3 жыл бұрын

Hey Lauri, how does this differentiate from the Mac Pro Killer?

@theTechNotice 3 жыл бұрын

Much better GPU performance & much better single core/thread performance meaning the mac pro killer will only be better at cpu rendering like blender, c4d, v-ray etc. :)

@roleplayingwithidiots7455 Жыл бұрын

Lil kid: I’m not gonna touch anything. Proceeds to touch. Cuts to main video

@donemiofficial 3 жыл бұрын

Wow I've never been this early!! Hahaha "no, we don't like RGB". I'm planning on building this in a Phanteks P600s Eclipse case with a dual fan config Noctua D15s Chromax black and white instead of the beautiful AIO you opted for. I would love to use white Corsair Dominator ram sticks, but I know they will be too tall for the NHD15s in a dual fan configuration. If I move the second fan to the back instead of the front (where it would be blocking the ram), how will this affect airflow? Cpu temps? Thanks in advance!!

@theTechNotice 3 жыл бұрын

Yeah all the geni.us links below are affiliate links. I appreciate if you choose to use them! 🙏

@donemiofficial 3 жыл бұрын

@@theTechNotice Gladly!! The quality of your content deserves my support!

@IdahoMthman 2 жыл бұрын

Another amazing build from you. What do you do with them after the build?

@theTechNotice 2 жыл бұрын

If it's not for a person, disassemble and use parts for other builds.

@IdahoMthman 2 жыл бұрын

@@theTechNotice you do builds for clients, Nice

@earganic 3 жыл бұрын

How loud is this build compared to the Be Quiet Orange build you did last year?

@theTechNotice 3 жыл бұрын

This one is much more quiet! :)

@nipaebrahim4800 3 жыл бұрын

Omg Dat baby too much cuteness I can't take it anymore 😂😂😂😭😭😭😂😂

@theTechNotice 3 жыл бұрын

🤣👍😇

@kurtlouis 2 жыл бұрын

Does this edit 6k with no problem?

@oldwolf6091 3 жыл бұрын

Please explain what PCIE expansion card (for type C). No links, just what is it called? Is it something like this: PCI Express Card 4 Port USB 3.0 with 5V 4 Pin Power Connector Speed Upto 5 Gbps, PCIE to 4 Port USB 3.0 ?

@theTechNotice 3 жыл бұрын

Nope, it should PCie to Type-c Front Panel Adapter or smth like that. I couldn't get good keywords to find it, hence the link :)

@oldwolf6091 3 жыл бұрын

@@theTechNotice Thanks, now I don't have to search sites for D-P Motherboard. I have been following your videos on this build throughout till the last one on 'What to do after the build is finished.' Now I can build the exact one thanks to you. It will be my first time building a PC.

@larryhogston7970 3 жыл бұрын

Great videos; I've been watching them for months. Where is the "setting up the software video"? I watched it this morning and now I can't even find it in my history. Was it removed? I had some questions and was wondering if I could send you a copy of my Amazon cart via Facebook to make sure all the components I was going to order will work and if you had any suggestions. Thanks for posting these awesome videos.

@theTechNotice 3 жыл бұрын

If you purchase all the parts through my links in the description you know they're compatible :)

@larryhogston7970 3 жыл бұрын

@@theTechNotice Of course all the parts in your video are compatible, but not all the parts in your video are in stock or within my budget. When your link take me to a page and the item is not in stock, there is no actual item part number or description to go by; just the shortened link. It would really help if the actual item name/number was listed as well as the links to make sure the parts are the same ones and that they will work. I've got the total down to around $3,000 which is a lot of money to take a chance. Will the Gigabyte GeForce RTX 3070 OC Edition be as good as the Vision as it is not in stock and cost more? What about the motherboard. The closest one I could find was the Gigabyte B550 Aorus Pro AC. Will it work? I found the Gigabyte Bb550 Vision D-P from another source; would it be the best? I was looking at the 750W Fully Modular Gamemax Power Supply for $79.99, but it's out of stock now. Would it suffice? That's why I asked the question. I'll try to muddle through it and watch more videos to see what other options I have. Thanks for your reply and your videos.

@raybyrne5599 3 жыл бұрын

is this motherboard a good choice for 3D content creation? ie 3DSMAX/VRAY or go for an X570? I use a NAS drive for storage so only need one m.2 drive. Im a novice builder btw.

@theTechNotice 3 жыл бұрын

So motherboard on it's own doesn't give you any performance, but ability to have more bandwidth for some components like m.2-s. like a better chipset might give you more pcie 4.0 m.2 options where's this mobo only gives you 1. Depends which NAS you have and what IO the NAS has, if you need 10GBE port then possibly some other boards would be more useful, if the NAS has a TB3 then this MOBO is the best for you!

@raybyrne5599 3 жыл бұрын

@@theTechNotice thats great info. thanks for the reply.

@ahuesphoto Жыл бұрын

The little plastic “adapter” that goes between case IO little cables and the IO connector on the motherboard *tends to fail*. Many years ago I almost throw away a $300 dollars Asus ROG motherboard because that plastic in-between part failed and it took me a lot of time to identify that it was the source of the problem. Because of this I only recommend it (for convenience) for testing that everything works, but I strongly recommend that people remove this little low-cost-part (for reliability) once their computer is fully assembled. Just my 2 cents. Thanks for the detailed video!

@craydogdog1530 2 жыл бұрын

Is there a decent alternative to RTX 3070 Vision that is also compatible with this build? I’m looking for Something less costly and not out of stock.

@theTechNotice 2 жыл бұрын

Any RTX gpu will work with that!

@MsDarkcip 2 жыл бұрын

Hey, there is another CPU that can work fine with this buil? I'd love to make this build but the 5900x is too overpriced in my country.

@theTechNotice 2 жыл бұрын

Any AMD Ryzen CPU is compatible with this build. :)

@nomadbarber 3 жыл бұрын

best PC ever

@theTechNotice 3 жыл бұрын

HOW DO YOU KNOW?! 🤔🤣

@GabbyTech 3 жыл бұрын

he is adorable ;D what no rgb ? my entire pc got rgb lol, very elegant build :)

@theTechNotice 3 жыл бұрын

🤣👍

@yotokhuso 2 жыл бұрын

Your son's real lucky to have a dad like you🥺

@benny_1985 2 жыл бұрын

“We don’t like rgb colours here” and I’m subscribed

@theTechNotice 2 жыл бұрын

😉😇👍

@certain_ed 3 жыл бұрын

Isn’t your AOI set-up blowing cold air out instead of blowing cold air in?

@daledietrich2715 3 жыл бұрын

I was confused by this too.

@davidbarkoczi5839 2 жыл бұрын

Hello! I want to ask for your help. I want to buy a new motherboard and cpu, but I don't know which motherboard to choose. I'm a 3D animator, so I need a PC that's powerful. I looked at the Asus ProArt Creator 10g and MSI prestige creator motherboards. I'm afraid of Asus because now I have a Rampage V Extreme motherboard that's broken and my brother also has a Maximis Hero that's not working properly, I also hear a lot of complaints about Asus, but MSI creator needs an AMD cpu and I prefer Intel buy. What high quality and performance motherboard do you recommend and which cpu? Rather intel or more AMD? Which type is within these? Thanks for the reply!

@theTechNotice 2 жыл бұрын

I've got a video coming very soon that will hopefully help you. ;)

@garypranzo9334 2 жыл бұрын

I always remove the stickers off of the NVME drive when a heat sink is involved. I do not pretend I know if it matters, just something I do.

@theTechNotice 2 жыл бұрын

They advise against it really, coz often that voids warranty.

@WildRapier Жыл бұрын

If you are worried about dust you should lookup KimWipes or an equivalent, lab grade wipes that leave no lint. TP not a great choice...I've ran a wastewater lab, so I've seen both sides...use the KimWipes!🤣