How To Build A Ram Pump

Рет қаралды 157,437

Күн бұрын

I offer kits in the following sizes:
1/2" www.ebay.com/itm/334123889292
3/4" www.ebay.com/itm/334252703024
1" www.ebay.com/itm/334313435507
1.5" www.ebay.com/itm/334819056023
------------------------
2" (assembled, Stainless Construction) www.ebay.com/itm/334680560643
------------------------
On Amazon: www.amazon.com/dp/B09HW45ZQK
------------------------
Parts List, Most items are available in a well-stocked hardware store for much better prices than Amazon. (links may be affiliate type links)
(QTY 2) 1/2" Swing Check Valve amzn.to/39QuM8S
(QTY 6) 1/2" Brass Nipples amzn.to/3AWRTKQ
(QTY 2) 1/2" Threaded PVC Tee amzn.to/3D0JYwN
(QTY 2) 1/2" Threaded PVC Valve amzn.to/3utSYrl
(12") 2" PVC sch40 Pipe amzn.to/3uFmkTL
(QTY 1) 2" x 1/2" PVC Reducer Bushing amzn.to/3kWEYD3
(QTY 1) 2" PVC Coupler amzn.to/3D4mp62
(QTY 1) 2" PVC Adapter to NPT amzn.to/39R33oH
(QTY 1) 2" PVC Threaded Cap amzn.to/3kUqKT9
(QTY 1) 12.5" Bike Tube amzn.to/3iok5zb
Additional Materials
Teflon Tape amzn.to/3AXSdJx
PVC Cement amzn.to/3F9Sco0
Garden Hose Thread Adapter amzn.to/3olFYCU
Bulkhead Fitting amzn.to/3oBbjSr
1/2" Threaded PVC Union amzn.to/3me9g3J
***Channel Equipment***
Tripod amzn.to/2tH1s31
Tripod Head amzn.to/36GeUTk
Main Camera amzn.to/2LpO5c1
Camera Cage amzn.to/2t3zGh4
On-Camera Mic(s) amzn.to/2CkNJAv
Action Camera amzn.to/2HbGSLP
Support the channel on Patreon: / joe_malovich
Support the channel on Paypal: www.paypal.me/joemalovich
Support the channel with a gift: a.co/9ilKfDC
Buy yourself a little something: www.amazon.com/shop/joemalovich

Пікірлер: 92

@julmerdudo5875 Жыл бұрын

Were you order that ram pump?

@JoeMalovich Жыл бұрын

I offer kits in the following sizes: 1/2" www.ebay.com/itm/334123889292 3/4" www.ebay.com/itm/334252703024 1" www.ebay.com/itm/334313435507 1.5" www.ebay.com/itm/334819056023

@briggturner4615 6 ай бұрын

@@JoeMalovichI have a 3.5gpm natural spring that has about 3ft of fall and I want to pump it up about 25 vertical feet. I realize I'm not going to get great flow rate but am fine with that. Planning to use 1/2 tube for delivery. Which size pump should I buy? 3/4 or 1 inch? Thanks

@JoeMalovich 6 ай бұрын

I'm afraid you don't have enough input height to generate sufficient output pressure. If you could get up to 5ft of input you would have a better time.

@briggturner4615 6 ай бұрын

@@JoeMalovichI could probably get another foot by putting it further downstream. I could also make the output only 20 feet although that's less ideal. If I could swing that, what size do you think I should get?

@JoeMalovich 6 ай бұрын

@@briggturner4615 3/4in would be good, not quite enough flow for the 1in

@badgermtn Жыл бұрын

I built one over 20 years ago, fed from a spring receiver box through 3/4" pipe, used it to pump probably 60 feet up hill and following about a 2000 feet course of above ground pipe to my cabin. Ran 24/7, even in the dead of winter. Pipes never froze because the water was always moving. These are great devices, though I no long use mine.

@hmlrhotheta 4 ай бұрын

The water stream I rely on is over 900 feet (around 300 meters) from the house I want to bring this water to. Also, the stream lies at a lower altitude than the house by about 20 feet/6.1 meters. Will this ram pump be able to defy distance and gravity to deliver water to my home 24/7 yearlong? If not, what ramp pump model do you recommend?

@badgermtn 4 ай бұрын

@@hmlrhotheta that distance and elevation would not be a problem. If I recall it takes about 1 psi to raise water 1.5 feet, so all you need is 14 psi to lift your 20 feet...the pump will easily produce that with enough stream head. I pumped uphill maybe 60 feet elevation and then horizontally at least 2000 feet. The most important thing is how much head you have at your stream, which is the elevation drop from the water intake - then through a length of pipe- to the pump itself. The greater the drop, the more velocity and energy the water will have to drive the pump. So if your stream is on basically flat ground it won't work unless you run a lot of pipe downhill to get sufficient drop. I probably had a good 20 foot drop or more through maybe 150 feet of pipe to the pump. Recommend at least 3/4 - 1 inch diameter pipe feeding the pump to minimize friction losses. You want the water flowing hard and fast to the pump (I used black poly underground sprinkler hose).

@hmlrhotheta 4 ай бұрын

TY for your quick reply. My neighbor, who owns that stretch of the water stream, told me that over the years the stream has become weaker and weaker. I visited the Island in may 2023 but did not see the stream. I guess I will have to inspect it physically when I return this year for my retirement. I noticed that you sell the kit you're recommending at a very affordable price. I like it. I'll contact you again after I move back to the island. Thank you , again..@@badgermtn

@badgermtn 4 ай бұрын

@@hmlrhotheta sorry friend, I'm not selling any kits. You have me confused with someone else. Again your biggest concern is having enough downhill distance (head) for the stream. You would also need to dam up or build a receiver box up-stream to create a reservoir of water so as not to suck any air. Even with a low flowing stream that will work since the ram pump won't be moving a huge amount of water, just a constant flow with each stroke that you would want to feed into a tank at your house and use a standard electric pump from there for your needs. Do some research on Google for calculations on required stream head if in doubt.

@veralium29 2 ай бұрын

In place of the ram pump what are you using now?

@frugallandlord6974 10 ай бұрын

I don’t even want to make one but I thoroughly enjoyed watching this video, great job!

@duanesiles1751 3 ай бұрын

Im glad to see someone other than me uses more than a rap or two on the threads

@joshuashaffer4556 Жыл бұрын

Thank you for this sir! You’re appreciated

@williamarmstrong392 Жыл бұрын

That is very interesting. Thank you for sharing !

@Veziety Жыл бұрын

Thanks for the info. Nice view you got there! God bless you.

@Spiritrun-hf2vf 3 ай бұрын

Excellent demo!

@MISSIONRIDERMOTOVLOG 10 ай бұрын

Amazing. Thank you

@markskise Жыл бұрын

Thanks for good video 👌

@raulllido4257 5 ай бұрын

I have seen this pump in one remote barangay I've stayed,, they use ram pump but its big enough,, it can supply the whole barangay,,, it is so useful,,

@ashleycawley5816 2 жыл бұрын

Thank you!!!

@kbjoney 10 ай бұрын

Hai, thanks for the information. If you can answer this please. How much head height it can achieve ?

@averteddisasterbarely2339 9 ай бұрын

This is awesome ! I'm curious about the limit to how big one can be built ! I'm thinking the larger the pipe...the more water ! I have a very fast flowing stream and would like to know if it's feasible ! Any info would be great ! Have a great day and thanks for the video !

@JoeMalovich 9 ай бұрын

They can get VERY BIG. How much fall do you have for your fast flowing water?

@averteddisasterbarely2339 9 ай бұрын

@@JoeMalovich at the base of the fall to the top is about 25 feet, it takes about 3 seconds to fill a five gallon bucket !

@JoeMalovich 9 ай бұрын

@@averteddisasterbarely2339 you can run just about anything then.

@alexpwl8671 2 жыл бұрын

Cool !

@allenshirley2795 8 ай бұрын

Fine tutorial

@bradprice9268 2 жыл бұрын

Very cool joe thanks I'll be using mine to run my off grid water supply in my now dry cabin and to the guy that said it's too expensive 😝 I'd have to drive two hours to home Depot look for everything get home realize I missed something and drive back so 80$is a bargain 🤣

@JoeMalovich 2 жыл бұрын

Yes I too believe it is priced fairly. I make much of my profit from being able to buy in bulk at a discount, and I spend enough that my supplies have free shipping.

@zarzolienhmar6743 8 күн бұрын

How up hill can pump up high?

@titingvines5540 9 ай бұрын

Where we order this ram pamp kit

@mauriceonyango8024 2 ай бұрын

How can I get the rum pump kit?

@gregb1714 2 жыл бұрын

I'm next to a stream with a pretty good flow rate but not any sort of elevation drop. Would this work for me?

@JoeMalovich 2 жыл бұрын

Nope. You might instead look into waterwheel spiral pumps.

@ridzwananuar5919 2 жыл бұрын

Do you mind if i ask? My question is, when we test the ram pump..can we test it using the running water from the main waterline..means that the delivery pipe connected directly to the water tap..

@JoeMalovich 2 жыл бұрын

I would not advise it even though it may work.

@wilsoncuaresma2407 8 ай бұрын

Sa lahat ng napanuod kong ram pump videos, sa iyo ang pinaka kumpleto. Details by details

@bushtuckaman 2 жыл бұрын

Would you be able to advise me on my ram pump please? I'm in Cardiff UK and a friend of mine a few months ago ordered me a complete 1/2 inch ramp pump from yourself before I discussed with him the size I actually needed. So I have your 1/2 ram in hand but wasn't sure it was the correct size for my situation. Do you think I can make it work and if so what size pipe to drive and deliver? I'm in an off grid location around what I've calculated is 17m vertically above a freshwater spring with ample flow. I can site the ram downstream of that spring, so the ram pump will 250m distance from where I need the water delivered and 20m vertically below. I was thinking a drive pipe 3-4m vertically below the spring. 30-40m long. I only need a small volume 50-100 litres per day delivered. The question really is more about the vertical height I can drive the water. Will the 1/2 pump drive uphill 20m vertically and what size, drive pipe and delivery pipe would be recommended for this situation. Cheers John

@JoeMalovich 2 жыл бұрын

Absolutely my 1/2“ pump will work in your site and provide much more water than you require. Coming out of the spring can be 1/2“ black poly pipe. The last 10m of drive pipe going into the pump should be either rigid PVC or metal pipe. Where this poly pipe and rigid pipe join there should be a tee to a standpipe which is a vertical uncapped breather that would be 3m to 4m tall in your case. This makes the effective drive pipe only 10m long, any longer and it might not won't work well. The delivery pipe can be anything, 1/2" black poly pipe would be preferred and most economical. Ram pumps can be finicky though and detrimental resonances could result. I am 95% certain the information I gave you will result in success, if not then upping the size of the pipe out of the spring and the standpipe will definitely work. Replacing the standpipe with a bucket 3m above and 10m of rigid pipe away from the pump will also work well.

@bushtuckaman 2 жыл бұрын

@@JoeMalovich Joe, many thanks for the extensive reply! I've resurveyed the vertical drops today's using the spirit level and eyeball method so there may be some error in the figures. The water delivery location will be vertical 24.5m, with the ram 3m vertical below the water source. I'm thinking I may need to increase the head to 4m to get it up that hill!? This will extend the length of the drive pipe to approx 40m so I'm also thinking I'm going to need a standpipe. It so essential to have the last 10m of delivery pipe rigid as you suggest or will poly hose maybe work? Also seen suggestions the supply line to the standpipe and the standpipe should be larger pipe, what are you thoughts on this? Cheers

@JoeMalovich 2 жыл бұрын

@@bushtuckaman You should try it at 3m, it might do what you need, if not you have the option of using that extra meter. At the high pumping ratio you are trying to use (about 8:1) I highly recommend going with the rigid pipe, keep it as straight as possible and brace the pump so all of the hammer force goes into pumping water, not vibrating the pipe/pump. As for the spring water supply line and stand pipe being larger I did mention in a previous comment that you might need to up them to 3/4", or just the stand pipe to 3/4" (or larger, you could even use 2" pipe if you want). I don't think the pump will be stressing the flow capacity of the 1/2" pipe from the spring over 30m. Try it and see, I would try mocking it up here but it's -7C and snowing outside.

@bushtuckaman 2 жыл бұрын

@@JoeMalovich @Joe Malovich I was think from an economics pov to slightly over engineer the drive, supply and standpipe to hopefully prevent me from having to reorder larger pipes if I fail to get the delivery height required. For example if I went to 5m vertical drop from spring to ram I would surely guarantee the desired delivery height. Ratio would the 5:1 and it only moved the ram approx 50m distance from the spring, 5m vertically So 1/2 delivery and drive pipe. 3/4 inch standpipe and supply pipe. With standpipe 30m away from the ram. Sounds cold where you are. Its warming up here in the UK now.

@JoeMalovich 2 жыл бұрын

@@bushtuckaman that's up to you. You can also double up on 1/2“ vs switching to 3/4. Still keep the stand pipe about 10m from the pump. Long drive pipes can develop resonant issues.

@bigbadbeau3d262 2 жыл бұрын

I have 2 50mm pipe coming down a hill from a creek 50meter high. Can I use this pump to pump sand out of my creek up the bank 3-4meter high ?

@JoeMalovich 2 жыл бұрын

I have no idea if a ram pump can pump sand, but probably not. Wear would be an issue too.

@kalibalawilliam5310 Ай бұрын

How can i get this ram pump bro in Africa

@jaks162 3 ай бұрын

Could you use a 45* fitting coming off the check valve to direct the exhaust water in the direction you want it to go? Or will this added friction on the waste side cause it to not run as well

@JoeMalovich 3 ай бұрын

It would still work but you may lose some performance.

@SaferAtHome Ай бұрын

@@JoeMalovich, I don’t see a parts list you stated you would provide in the comments

@JoeMalovich Ай бұрын

@@SaferAtHome check again, it's there.

@duanesiles1751 3 ай бұрын

Use a hole saw and you will absolutely get a better cut in your bucket

@TheAwesomeHomestead 11 ай бұрын

What's the optimal pipe size ratio? IE, drive pipe is (A) delivery pipe should be (A/½) or what ever it should be. A real world example I keep seeing is 1¼" in ¾ out. But I've also seen 1" in ¾ out. One must be better than the other for delivery distance and height

@JoeMalovich 11 ай бұрын

The optimal delivery pipe size is: bigger is better until you hit diminishing returns. Half pump size is usually sufficient.

@user-uh5mt3uy3p 4 ай бұрын

최고 입니다

@hmlrhotheta 4 ай бұрын

@JoeMalovich 4 ай бұрын

Distance isn't so much an issue as long as that pipe doesn't hold air bubbles. How much fall can you get from your stream?

@adrenalinefamily2339 11 ай бұрын

How much pressure does this system make

@JoeMalovich 11 ай бұрын

Approximately 7x your input pressure.

@eightrfarinas8450 11 ай бұрын

@@JoeMalovich So 2 psi will gain 14 psi? 🤔

@JoeMalovich 11 ай бұрын

@@eightrfarinas8450 yes, but will use 14 gallons of water to pump 1 gallon of water.

@petesmith13 2 жыл бұрын

Still unsure what this is for... Basically storing the energy of water flowing down hill to get it to flow back up a certain amount so it can be piped into the top of a tank without having to use using a electromechanical pump or an elevated pipe all the way from the source to the top of the tank?

@JoeMalovich 2 жыл бұрын

Used for raising natural flowing water up to a more usable height for irrigation, livestock, utility, drinking.

@petesmith13 2 жыл бұрын

@@JoeMalovich thanks mate

@richardpeterson3753 2 жыл бұрын

one known application for these is moonshiners often use them to get water to their still condensers and mash tanks at their sites,which are often in the middle of nowhere.these are significantly more quiet than gas operated units,reducing risk of being discovered,and don't require electricity.though there is a huge amount of uses for these,from watering livestock,to providing arrogation to crops to getting water to your house in off-grid situations.also excellent to have on long term camping sites.

@kingstretch7270 9 ай бұрын

how long did it take before you got water

@JoeMalovich 9 ай бұрын

maybe 10 minutes.

@scottyray4516 12 күн бұрын

I just don’t see where all the teflon tape and glue is needed! Surely it can’t possibly make that much pressure?

@JoeMalovich 12 күн бұрын

It absolutely can build much pressure.

@huseyinoztabak9823 Жыл бұрын

Kaç tl dir takim su pompası

@TheAwesomeHomestead 11 ай бұрын

Are these check valves pressure adjustable?

@magicman9486 Жыл бұрын

I would like to use the fast flowing water of the Mekong river to irrigate the nearby fields. would this work for that?

@JoeMalovich Жыл бұрын

No, you want a spiral waterwheel pump

@TheAwesomeHomestead 11 ай бұрын

What's the effect of a single undersized fitting? Like if you had a 2" to 1" reducer Into the pressure tank. I'm thinking about building a 2" ram pump but I'd like to use some of the stuff I have laying around, like a spare expansion tank I have laying around. It has a 1" inlet. Hence the question.

@JoeMalovich 11 ай бұрын

It's really best if the pressure tank has zero restriction, you want to give the hammering slug of water every opportunity to get into the output side of the secondary check valve. It will work but will be a bottleneck. If you have a second one that would be best. You can also use a snifter valve and a plain jane section of 2" pipe but you need to orient everything so that the bubbles want to go into the tank and stay there. Reference this pump layout kzfaq.info/get/bejne/qdGRo7Kd0M_Dj2w.html

@elpasobetta Жыл бұрын

I think I'm sticking to harborfreight booster pump instead.. thank you

@zinovyrozhestvensky3636 Жыл бұрын

Sharp rock cuts your wire, short circuiting and shocking you while in the creek

@tempestive1 Жыл бұрын

Just the one thing - teflon leaves PFAS in the water, kust like anti-stick frying pans. It bioaccumulates and is NOT good. Look it up - I stopped using it altogether.

@allnaturalhomesteaders 6 ай бұрын

How would this work on a stream? Instead of a bucket would I just put the pipe into the stream, if I could post a picture, I'd show you my stream. But I have a video of it on my channel, it runs down hill, and has about 3-4 waterfalls. Soooo. Oh nevermind, you put it in a stream. Smh. 😂 Might help if I watch it farther. So how's much water does this pump per min? Ohhh what, you didn't put it in the stream on your video! Ugh.

@JoeMalovich 6 ай бұрын

Correct you don't need a bucket. You can use the stream water directly. That wasn't my creek. They pump up a maximum of 7x the input height, more flow at lower ratios like 3x. Need 3ft of elevation going into the pump to operate. More elevation going in is better.

@angiepelser3251 2 ай бұрын

You never put plumbers tape on the thread

@vajona2495 Жыл бұрын

You never, EVER put metal male adapter into female PVC treads...

@JoeMalovich Жыл бұрын

Then what do you do?

@vajona2495 Жыл бұрын

@@JoeMalovich the metal male puts too much strain on the female PVC and will fail; however, a PVC male does not put strain on metal female coupling. Just switch which the parts materials.

@richardpeterson3753 2 жыл бұрын

lol,there is no way in bloody hell I'm giving you 80$ for this.ill be parting this together at the local hardware store. you had a good idea,but got a bit greedy man.

@JoeMalovich 2 жыл бұрын

Go for it.

@kevinnimmo2621 Жыл бұрын

Jeezo. You are paying for the guys time. If you can build this yourself...go 4 it. He practically shows you how to do it (although he did have a leak on the tower) other than that...80 bucks is a bargain if you are able to make good use of this system.