How To Build a Small Dry Boom for Your Lawn Sprayer from SpraySmarter.com

Рет қаралды 15,537

Күн бұрын

In this video we discuss how to add a dry boom setup to a small 12 volt sprayer that you have already.
3/8" Hose barb Tee
www.spraysmarter.com/banjo-3-...
Nozzle bodies with out built in check valve
www.spraysmarter.com/lawn-tur...
Tip Strainers
With check valve www.spraysmarter.com/teejet-p...
Without check valve www.spraysmarter.com/teejet-t...
Spray Tip Cap Yellow
www.spraysmarter.com/teejet-q...
Spray Tip XR11002-VS
www.spraysmarter.com/teejet-x...
3/8" Threaded Tee
www.spraysmarter.com/banjo-3-...
Banjo Micro Valves
www.spraysmarter.com/liquid-a...
3/8" Hose Barb
www.spraysmarter.com/banjo-hb...
Vari Clamp for Pipe
www.spraysmarter.com/lawn-tur...
Spray Wand
www.spraysmarter.com/lawn-tur...
Shurflo 12volt pump
www.spraysmarter.com/lawn-tur...
3/8" Ag Spray hose
www.spraysmarter.com/lawn-tur...

Пікірлер: 19

@windmillacres679 Ай бұрын

Very informative. Thank you

@markcompall5501 3 ай бұрын

Thank you for the informative video. Getting ready to build my ATV boom sprayer for logging roads & trails this summer. Valving off the boom to run the wand is a great idea.

@user-sp8cx6og2s 22 күн бұрын

great illustration, much thanks

@Spraysmarter 15 күн бұрын

Glad you liked it!

@foghornleghorn8536 10 ай бұрын

This was super helpful thank you.

@Spraysmarter 10 ай бұрын

Glad it was helpful!

@JP_BowHunter Жыл бұрын

Great video. How do I know how far apart my nozzles should be or how high should I have the nozzles from the ground.

@Spraysmarter Жыл бұрын

Typically you would want a 20" nozzle spacing 20" off of your target, no more then 30".

@chrisyoung8062 9 ай бұрын

If you're using a Teejet tip, they tell you the optimal spacing and height from the ground for each nozzle type. It's all in their catalog. As Spraysmarter replied, most of the fan style tips are 20" and 20" or a 1:1 ratio.

@chrisyoung8062 9 ай бұрын

what type of pipe are you using for the boom itself?

@Spraysmarter 8 ай бұрын

We recommend schedule 80 pvc or steel pipe, you can also use square metal tubing up to 1-1/4", there are clamps for that as well.

@adambolt7111 Жыл бұрын

I want use only the two end nozzles, is there a way to turn on the inner nozzles?

@Spraysmarter Жыл бұрын

That would require a valve at both ends or make them individual sections with a manifold, you could make one from a cross(CR038) then attach a valve for each nozzle. Banjo makes a manifold but it has 8 outputs(TM075/050).

@brianrychetsky2377 24 күн бұрын

Can you do an updated video with updated links most aren’t working . Also there isn’t a link to nozzles with built in check valves only without wish is one of the broken links

@Spraysmarter 15 күн бұрын

Sorry everyone, the links have been fixed.