That's fantastic to hear! Enjoy the build, it's very rewarding! Thank you very much, I really appreciate you taking the time to write this comment! 🤗👌👍🙏

Thanks for the kind words! Glad you found it of some use. Oh yes, metal dogbones are another great hop-up! Cheers!

Thanks a ton Alex! I've tested these mods and it works great off road. Hope they work for you! Cheers 🍻 😎👍

Hi Marino - thank you once again for the very kind words, it's so encouraging to me and very much appreciated. Great to hear you've found the mods and tips useful, as it's exactly why I make these videos. Wishing you a great 2022, all the best from Mark... 👍

I totally agree! You had a great idea there to cover the holes with a plate! Thanks for sharing, I might look at doing that next time - cheers! :))

Glad it helped, Trevor! Yes, I also swap the settings on my TT02's, and have used my TT02D for light rally running. Such a versatile chassis. All the best from Mark - cheers! :)

Hello Jeremy my friend! Hehe, glad you watched straight away! Yeah, I really enjoyed this build, trying out a few tweaks and veering away from the manual makes it more "my own build". Looking forward to the first spin, fingers crossed it all works OK. Thanks for the awesome comment dude! :))

Hello, Alex, thanks for always leaving a wonderful comment. I hope one day I will see a TT02 Subaru navigating your fantastic race track, in rally trim! Yes, I will think of Richard Burns every time I drive this little 1/10 vehicle. I hope you are feeling rested, mon ami - try not to work too hard! :-)

Hi Carmine - yeah, as I was saying, getting a bit behind of late, but still wanted a Friday upload this week - glad I did as it's doing pretty well at the moment. Thanks for tuning in bro - always a pleasure to read ya. The clearance is pretty good now, about what I expected and enough for a bit of rallying - we'll find out soon. Take care, mukka. :))

Thanks, Mikey! So glad to read that you are enjoying the videos, makes them well worth making - take it easy my mate! 👍

You should, Mikael, I keep saying you need a rally car to run in that big garden of yours, and perhaps a trip to the beach? Thanks for the amazing support my friend, I enjoy reading your comments very much! I hope you and your family are doing well. :)

Mark Bryan RC All’s well! Well, I just enjoy your videos. Hope all is well with you and your family too.

@@NordicRC Good here too - thanks mate!

Awesome, thank you! the 2 thumbs up is a welcome bonus! Cheers! :O)

Hello Tomas! Thanks for the comment, I hope you can make the desired improvement to your TT02 - best wishes from Mark... :)

Hiya Steve - I may look at the alloy blocks at some point, just trying to save a little cash at the moment! Thanks for the comment - all the best to you my friend! :-)

@@MarkBryanRC yea I broke the front blocks 2 times and then said it's time for aluminum ones, I don't like using aluminum parts only in spots that they would actually be better because most all times they make things worse.

@@ShenRC Gotta agree with that, Steve, usually just moves the weak spot to the next weakest part! :))

Thank you very much, brother! :))

Thanks for the message! Great to know that the mods worked out well for you! Best wishes from Mark.. :)

Glad I could help! Thanks for taking the time to leave a positive comment, much appreciated my friend! :)

Hi Coryn and great to hear from you again! Good to hear that you got all the mods done, hope all is working well for you mate. Yeah, the alloy propshaft is a great option. All the best to you, too! :))

Hi Bruno! Happy to help! Thank you for watching and for leaving a nice comment, much appreciated!

And thank you for watching, much appreciated here! :O)

Cool, thanks very much for the supportive comment, it's great to know these videos are of some use!

Hello, Fons, my friend. Always great to read you - best wishes from Mark... :-)

Awesome, thank you Louis, you are too kind! Great to hear you have enjoyed my videos and good luck with your TT02 build, I'm sure you will enjoy it. Thanks again and best to you, buddy! 😎👌👍

Thanks, Steve! I really enjoyed tinkering with this chassis, made it more rewarding than just following the manual - let's hope all the mods work OK! Have a cracking weekend, mare! :))

Many thanks for taking the time to write a comment, Julio, appreciated - Cheers! :-)

Hiya, Mikey! Thanks for rewatching, it all helps! That body of yours sounds great, and a very nice turn of luck that the finish is a killer chrome look! Come on mate - get those decals stuck on!!! Good luck with them, I've got my fingers crossed for ya! :))

Hi there Kevin and thanks for remembering this video. I hope your rally conversion goes well, a nice change after all this on-road speed running! Yep, I did the same with those spacers on another build! 😎👊👍

Thank you so much, Mark!!

Cheers, Bob! Yeah, it is cheap but I think it will perform as needed after the few cheap mods - no point spending hundreds on a 100 pound car! Hope your build goes well for that lovely Audi body. Looking forward to that pint! Bottom's up my friend! :))

Hope you enjoy it! Lots of cool hop-ups. It should run very nicely! Have fun! :D

Glad it helped my friend! Many thanks for the sub, I really appreciate it! Best regards from Mark...

Thanks for that, Craig. I know a fan can be mounted on that bracket, but prefer the simplicity of the heatsink! All the best from Mark. :)

Thanks, Mikey Mike! I hope some of these tips work on the TT01 too! They just might, please let us know if they do. Have a smashing weekend my friend! :)

Go for it! The mods really do make a big difference - thanks for watching! :)

Thank you Jay! 😎👍

Hi Nick - thanks for the support, brother - yeah this thing can definitely rally with a few simple mods. I agree, rally is more fun than road running, although that has it's moments, too. Thank you for the encouragement, always appreciated my friend! :-)

Hello my friend Derek. Thanks for the kind words, if only Tamiya would take note of what their fans are doing, and incorporate some factory improvements - but I fear we will be making our own mods for a long time to come! :-)

*performance

:D

Great to hear it was of some use! Music to my ears my friend, that's why I make these vids! Have fun! :o)

All good Tony! Sorry for late reply, very busy mate! Yeah the tyres are the best you can get for rally IMO. Hope to start the body today at some point, I'm sinking in work too my friend. Really good of you to catch up, you are a star my mate! All the best as always! :))

Cheers Jonathan - it's really good of you to take the time to leave a nice comment, I really appreciate it. Have a cool weekend! :-)

@@MarkBryanRC Mark I'm a big fan of the channel, you provide great content and some really insightful things about these kits and the hobby in general which I only returned to a hear ago having been away from it for 30 years lol ...

@@jonathanpayne1174 Seems to be a theme here with many of us RC fans - I had a 20 year break too! Glad you like the channel, Jonathan! :-)

@@MarkBryanRC There most certainly is Mark. So I'm sure I speak for many of us when I say we appreciate you and your channel. Please keep up the great work!

Cheers mate, I'll do my best! :-)

Thanks! I hope the mods work well for you - cheers! 😎👌👍

Hiya mate! Yeah, it's always with a little trepidation when I start chopping Tamiya kit parts, as I usually don't have a spare in case it goes wrong! But as I say, slowly, slowly, keep checking before it gets past the point of no return! Ahh, the heat sink - yeah never really get a problem running on road, but a few of my rally cars are running higher than stock gearing off road. If the terrain has hills, grass or mud I find it puts drag on the car and the motors do get hot. Haven't started the body yet, just getting over returning to work full time! I'll take my time over that and do it in stages, I really enjoy that part of a build. All the best to you, hope the weekend's going well for you too mate. :-)

Cheers buddy, yeah, the standard hardware ain't the best! Thanks for the comment, appreciated. :)

Glad it was helpful! Cheers, Brams! :)

Hi Jonathan! Thank you! Yeah, the motor cover can take a fan, but if you don't intend to fit one, leave the cover off! But you are correct, if you have a fan that might be even better for cooling the motor! Thanks for the great comment and happy RCing! :D

Hiya, Charlie! Thanks for the great comment as always. Well I hope my steering holds up, this is the first basic TT02 I have ever set up for rallying. It's going to be fun finding out how she goes. A super weekend to you too my good friend! :-)

Thank you, Paul. Yes, I agree that UJ's would be a good addition to the drivetrain on this one, I need to start saving a little cash! All the best from Mark...

And thank you, Aldy! I'm very happy to hear that the videos were helpful and I appreciate the feedback. I hope you have lots of enjoyment from your Ford Escort. Best regards from Mark... :)

Same to you, Gary! :O)

Hiya Pete - hope all is good down south! Yeah, lot's of problems trying to render and upload this one - thanks for commenting after the long wait! Yeah, I really studied this build hard as it was supposed to be a "how-to!" Got lot's of ideas from the type-S build and Rob's Lancia, plus a thread posted by one of the commenters on this video. Lot's of info out there. Those Chinese tyres are very good - cool you got some wheels from Derek (Top Bloke!) Hope to see your Scoobie soon! Totally knackered mate, finding it hard to do work and KZfaq at the same time after such a long break, I will slow down on here for a bit I think, lots coming up at home this month. Chilling today and more jobs to do at home tomorrow, don't know when this body is going to get done! Have a good one my mate! :)

Always welcome! 😁👍

Great stuff, Sean, that's the best 👌 upgrade you could have made 👍 😀

Thanks for that, Peter - yeah it makes a lot of sense to fit a fan. I can report the cheap little heatsink works well too! :)

Many thanks, Kirkster! Good tyres ain't they? Hope you, the Missus and Kaitlin are enjoying the end of a nice weekend, mate! :)

Mark Bryan RC yes good them bro I’ve been working all over the weekend kaitlin says hi to you mark and the wife is all good to bro

@@NSRBOY250 Ahh, Bless! Thanks to the lovely Kaitlin, say hi to her for me, such a lovely girl! Glad all is good, hope you get a rest soon matey! :))

Mark Bryan RC will do mark 👍

Thanks, Karen, much appreciated! :))

Thank you, Michael! Cheers!

Thank you so much Xavier! 👍 It is great to see your message - I'm really pleased you enjoyed the video my friend! Best wishes from Mark... :)

@@MarkBryanRC No problem, and thank you Mark 👊😉✌

Thanks very much, Peter! This is a great platform to start with and you can do a lot to improve it without spending tons of cash! Good luck with the 1/1 size cars! Yeah, those shocks need sending to the bin, a good CVA will always make all the difference. Take care my friend! :))

@@MarkBryanRC thanks Mark ,I learn a lot from you and Mick from rc hobby shed. He just tortured a new kyosho Mad Van, you guys really give these cars a decent bashing, always great to watch.

I saw Mick's van run and it was awesome! No point putting these things on the shelf, they are made to be driven, and driven hard! :O)

@@MarkBryanRC it was a bash and a half , he was laughing which made me laugh. No way my 4s Arrma outcast would survive that. You blokes really know how to have fun. Take care mate.

I agree - if you can't have a laugh with an RC there's no point! Love hearing the giggles, too. Take care and keep having fun! :-)

Hiya, Paul. Yeah, it sure looks like a rally cart and comes with the right tyres, but would you believe, in the manual is a warning that this kit is not designed to be run off-road!!! Crazy, my friend! That Motul Autech sounds like a sweet project, love the bodywork on that one, too. Agreed, too many under-par parts in this TT02 kit. Take care, mate. :)

Many thanks, Marco, glad you enjoyed the video! :)

Cheers, man, glad you found it useful! Good luck with the mods on your TT02!!! :O)

@@MarkBryanRC The TT02 is too low for a Rally car with your mods will be perfectly fine. This is mine, it's a Lancia kzfaq.info/get/bejne/e7SCaamLvbyZgmQ.html&ab_channel=GastonMaqueda

@@GastonMaqueda Just watched your video, Gaston, excellent stuff my friend! :)

@@MarkBryanRC Thanks bro

@@GastonMaqueda No worries! :)

Cool, thanks Shouwn! Oh yee, I've seen those dust covers, and Kamtec is a great company, I've had great products from them in the past. No more steering jams for you! Best regards from Mark... :)

@@MarkBryanRC I tried to increase the ride height of my TT02 using long shock bottom (as per your recommendation) but I found that my driveshafts were 'shuddering' excessively (I'm using Yeah Racing CVD's) so I had to use the standard shock bottoms to ensure smooth operation. Wondering if you have this problem with the standard drive shafts???

@@shouwnoosting6030 Wow - if you got shuddering with CVD's you must have managed to get more travel than I did - no, the standard driveshafts on mine drive very smoothly!

@@MarkBryanRC interesting 🤔 I’m also using Yeah Racing adjustable upper suspension arms so wonder if that is giving me additional suspension travel compared to standard arms???

@@shouwnoosting6030 Yes, it could well be the Yeah racing parts that are making the difference - a great hop-up, too! :)

Thanks very much, Kevin. Hmm, as far as rally cars is concerned, I love the XV01 chassis, but up there with it is the TT02 Type-S, an awesome upgraded version of the TT02 with completely different and infinitely better suspension. For the price, about £130 without a body, it's a winner!

Glad you liked it! Many thanks for the nice comment! :)

Hello my friend. Yes, 25mm is good enough for most dirt and gravel tracks! Enjoy your GTA build, a very nice kit. I appreciate your kind comments, best regards from Mark... :)

Thank you so much! :))

Thanks very much, Stephen. Hmm, strange - I think mine did drop enough, maybe a mm or 2 left in the damper. If it's only a few mm, it shouldn't matter, just don't put the spacers on the spring or you will have too much preload. Hope it works out for you!

Thanks very much, James! But yes, it is certainly possible to revert the mods to a near stock setup. To swap the uprights back to stock would be the most time consuming, but easy to do. However, the biggest difference would be to swap the shock bottoms for the shortest ones. The fastest option would be to have a spare set of shocks set-up with a shorter distance, eye-to-eye, say, 50mm. It would then only take a couple of minutes to pop the shocks on and off the ball joint mounts! Cheers, Mark :-)

Thanks a bunch, Gary! Lots of us are the same, coming back after a long break, I'm back after 20 years! I don't know of a current Tamiya kit with this much travel as a standard rally car. Hope you find one you like! :)

Hi Rich - thanks for the high praise, appreciated. As for the servo, I tend to go for the cheap standard servos - only had a few issues and they are cheap to replace if you wear them out. My goto is the waterproof Etronix ET0015 - it's fitted to most of the cars you see in my run videos, does the job! All the best, my friend. :-)

Mark Bryan RC Thank you Mark! I appreciate the reply. Also thanks for the advice I will order a couple of those bad boys. Have a great weekend.✌️

@@rickbachman993 Cheers, Rick - you too buddy! :)

🤗🙏

Hi Gio! I got them from eBay, here is a link: www.ebay.co.uk/itm/M3-3mm-ISO-7380-A2-STAINLESS-STEEL-SOCKET-BUTTON-HEAD-ALLEN-KEY-SCREW-BOLTS/221107048515?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 You need to select "M3" and the length you want, I got 10mm, 12mm and 15mm All the best, Mark...

Hi Bro - thanks for finding the time to watch this rather long video! Yeah, soft is the way to go on rally shocks for sure. Need to soak up those bumps! Some shocks do come with a set of different strength springs, Yeah Racing do, I think. Good to have a selection. Good idea with the motor cover. I certainly will try the only 2S I have in this one on it's first run, but that may be a while as I haven't even started the body yet! All good, Paul, hit 4K today and I'm over the moon - thanks for coming along my brother! :-)

Congrats Mark, your channel is a great place to kick back and enjoy a variety of tutorials, runs and reviews. You are so personable and interactive, really natural and authentic. Like I said before, I used to watch your channel way before I started my own because of the Tamiyas and Rallying. You will keep growing. My next upload was inspired by you and Derek from Holy Hill RC. Both of you got me building stuff again. Will try to put it up soon. Congrats again Brother. You really make RC fun.

Thanks again Bro - really good to read your comments, I promise the me you see is the real me, there is no possibility I could do it any other way! Your channel will keep growing, too, just keep doing "you" too! Now you got me intrigued, looking forward to that video, Paul! :))

Thanks very much! All of the screws are M3 on this kit. Most are 10mm long but there are a few 8mm, 12mm and 15mm. I only changed the 10 and 12mm screws. But then they are pretty cheap if you look around on eBay. Cheers!

Thank you Arnaud for the nice comment! In terms of performance and value for money, I would recommend the TT02 Type S chassis. The suspension setup is far superior to the stock TT02, and it comes with excellent hop-ups, including bearings, CVA shocks, steel drive shafts and drive cups and much more. It is quite easy to modify the A arms to give the ground clearance needed for rally running. If you are interested, this video shows how I adapted the suspension at zero cost: kzfaq.info/get/bejne/bNGHgNmVqc7TmYE.html Happy RC-ing!

Hi Edoardo! Good to hear you found your own solution - and a fast one too! Hope it works well for you my friend! :)

@@MarkBryanRC i did exactly how you were showing in the video and grinded off as you were showing, however when after position the front dampers you squeeze them it seems like you have more room, maybe i chopped them too much as I had to use the shorter eyelet to fix the dampers to the 5mm pin ball as with the longer ones the damper was too tight with very little room. It might be ok, but still get an extra A1 set just in case. They seem a bit too tight on the suspension,meaning that the piece A14 if pushed down doesn't go past the chassis 's level. Hope i didn't stuff it 😂

@@edoardobarzano978 Strange we have different gaps! Hi Edoardo! I hope you can get it sorted out, I'm sure it's something simple. I think you will have more ground clearance anyway, which is the whole point of the mod. All the best! :)

@@MarkBryanRC they looked the same length as yours in the video, but maybe I went 2-3mm too deep... basically the front lower arm does not go lower than the chassis hight unless pushed hard.... i ve ordered the spare part not tto sure if it s needed though, just thought I follow your video-advice and yours look like they can go lower than the chassis's height... Thanks again Mark... will keep you posted.

Thanks for the update, Edoardo. Yes, my lower arms go lower than the chassis. I'm sure you will find a solution! It will be good to know how you get on. I hope mine runs OK when I test it - we will soon see! :)

Thanks very much! :)

Thanks very much. Hmmm - I think the 70mm shocks will be too long, but it's worth a test fit. Maybe you can put shorter bottom ball-ends on? Or try the 70mm shocks with the stock TT02 springs on them? Might just work! Oh yes, the new chassis cover would be a great addition to any off-road TT02. Cheers for the comment, my friend! :)

Hello my friend! Thanks for watching, greatly appreciated! Here is a link to those cap screws, I mainly use the 10mm and 12mm long screws to replace the Tamiya ones: www.ebay.co.uk/itm/221107048515 Cheers! :)

@@MarkBryanRC Thank you sir! Oh okay those are just M3 machine screws, button head allen... but are you using those in lieu of the self-tapping screws? They work fine?

@@jediradekcrif9568 Yep, just machine screws. I have used them in most of my Tamiya kits and have not had one issue with them, they are a great replacement. Tamiya does use a lot of machine threads into plastic, like the 5mm ball connectors for shock and steering mounts!

@@MarkBryanRC thanks man!!!

Hi Chris and welcome to this great hobby! Hmmm, there seems to be a shortage of spares at the moment but stuff is still available if you look around the market. You could search for the ones I used: Tamiya 50746 CVA Super Mini Shock Unit Set I found some on eBay today, You can use most 55mm oil shocks on the TT02, Fastrax also do an alloy 55mm set for the TT02 that should do a good job, I have tried them and was impressed with them. Check out my video of them here: kzfaq.info/get/bejne/b59mZraVy6updZs.html Good luck!

Hi there and thanks for the thoughtful comment. Yeah, I agree with you about that motor cover and what it looks like it's supposed to do. But in practice, as you say with the body fitted the airflow inside the chassis is minimal and I find the motor runs cooler without the cover. The best solution is a fan to force the air in, that you can fit by removing the scoop, the cowling has the holes to accept a fan. But for £3 the simple heatsink is a good cheap and maintenance free solution! Cheers!

@@MarkBryanRC thank you again for your video's, just gave it it's first propper test in the front yard (we have half inch- an inch big pretty jagged lose stones which make for pretty rough terrain). shortening the front cup peg at the bottom was pretty MVP, also the CVA's. on a earlier test it couldn't make it up a light slope (of jagged little rocks but still) now it'll just get up there. didn't have a great drilling solution so I opted for some traxxxas 3x6mm sunken selftapping screws and some traxxxas 5mm sunken head washers which looks amazing and gets the job done (I think using a 5mm tamiya washer with a tamiya 3x6mm would actually be better as the washer is much thinner but this look pretty nice :P also used threadlock since...6mm instead of 10mm . only disappointment that I'm considering fixing but it's 20 bucks to fix which...is a bit steep is that the CVA kit I got only had black medium springs rather then the 3 options. went with soft dampening oil and the 3 hole restrictor which seems fine but the spring is just a bit to strong...or the rocks are to jagged :P rocking a celica GT-4 body (aftermarket which doesn't look as sharp as the tamiya body that came with the kit but it's the only game in town for that body so I'll take it :P also found the matching rims from tamiya which were silver for some reason..painted them which...isn't great...)

Hi and thanks for sharing your findings! Cool that you can see the difference in off-road performance. I like the way you came up with your own solutions, it's a part of the hobby that I really enjoy. Yes, I think the stock CVA springs are a little too stiff for rally. But if you start taking small jumps with the car they might pay dividends! love that GT-4 body, too! Cheers! :o)

@@MarkBryanRC i gotta say it's really fun going from a stock TT-02 ow this is neat, noticing some "issue's" and then finding solutions to it. and testing it afterward, did rob's mods that he did vs the XV-02 and before it was barely able to turn around in the driveway, now it only takes half the driveway (and the front's even higher ^^). do wish I had known how much I was gone spend in hopup parts...and that's not counting the nice to have's I've got coming. if I had a time machine i'd probably have just gotten a TT-02 SR, all of the pro's of the S with the hopup bits you'll probably end up getting anyway (SRX isn't compatible with the type S lower arm mods). do the diff's and driveterrain and call it a day. or just get the XV-02 swallow that bitter up front pill but know that except perhaps an insanely expensive slipper clutch I'm done.

@@anub1s15 Oh yes it can get a bit pricey when you start adding multiple hop ups! I think the best option overall is to go straight for an XV01, mine is still totally stock and it's awesome! But that said, a lot of the fun, as you say, of the TT02 was working on it bit by bit and seeing it get better! Cheers! 😎👍👍

Hi there and thanks for the kind words! Oh yes, those dogbones will fly out if you are not careful. Mine have been OK because I restricted the steering with the dual rate steering setting on my controller. You can search for the Yeah Racing TT-02 universal Joints ( www.ebay.co.uk/itm/353942068573?epid= ) that are excellent but you will also need to change the output joints to metal ones. Alternatively the link below is for a set that will fit without changing the gearbox joints: www.ebay.co.uk/itm/385300061887?itmmeta Cheers!

And thank you for watching! The servo I used was a cheap Radient RSBS201PG Standard 5kg analog servo, which is just the job for this chassis! Cheers!

Hi and great to hear you found this stuff useful! Good luck with the build. I think 65mm will be a bit too long, but 60mm might work as long as the springs aren't too stiff as the gap is only about 55- 58mm with these mods. Squashing a longer shock in the gap will add a lot of preload to the spring. Drastic measure is to cut a bit of the coil off each spring, it's worked for me in the past! All the best my friend! :)

@@MarkBryanRC thanks for the advice! I do know one guy at the track is running Yeah Racing 60’s but I think they are the touring shocks. I’m hoping to find off-road version in 60mm if I can. Unless I can find the mini Tamiya CVA’s which seem to be popular and out of stock everywhere.

@@JFlyer1973 No probs! I have heard good things about those Yeah Racing shocks, I think they will do the trick for you. Hehe, those Tamiya CVA's are like rocking horse poo!!! 😂

Thanks, Jeremy. Here is the link, the price has gone up a little, but still cheap! www.ebay.co.uk/itm/4pcs-RC-Motor-Aluminum-Heatsink-Cooling-Fins-12pcs-Pin-for-540-545-550-Motor-/393114918128?hash=item5b87799cf0

Thank you for the reply Mark - greatly appreciated! Have also searched for some period multi-spoke alloys and cannot find anything - do you know of a supplier?

@@jeremyturner2301 Hi Jeremy, I generally only use Tamiya parts, Tony's Tamiya parts is a great supplier - here is a link to some wheels he has in stock: www.ebay.co.uk/str/Tonys-Tamiya-Parts?gclid=Cj0KCQiAx9mABhD0ARIsAEfpavQjonVVekR6ri6Dei52dgsPoFGKLdO-OIzCZHYkhmbyyhgGn_GJ3KsaAnN_EALw_wcB&matchtype=b&adgroupid=71572595973&cmpgn=2033188068&crlp=355246904598_&rlsatarget=aud-629407027585:dsa-764521878456&loc=9045472&mkrid=710-153696-560033-8&norover=1&network=g&mkevt=1&device=c&mkcid=2&_bkw=wheels

Thanks once again Mark - really wish Tamiya would release the Porsche 959 rally car again.

@@jeremyturner2301 I'm with you on that thought, Jeremy - fingers crossed! :)

Hi Gary - I promise I try to pick up all comments - it will be a mistake on my part if I don't, as some comments seem to go missing in KZfaq sometimes. I see no pitfalls in using a TT02S - in fact it makes a FANTASTIC rally car with a few little mods. I have done a full video series on building upgrading the Type-S for rally. It was so good that it beat my XV01 rally car in a race-off! It has so many upgrades included in the kit, you won't believe it. The best news is you don't need to spend any money or buy any parts for the conversion. Here is a link to my playlist of the TT02 Type-S: kzfaq.info/get/bejne/aNGIp6pop9Opfac.html

Hello, Scotty! Oh yeah, the XV-01 is a great chassis but so much more expensive. The TT02 is a great chassis anyway, and a few tweaks can really make a difference. Wishing you luck with your rally build, I'm sure your car will be a good runner. Cheers from Mark in the UK!

@@MarkBryanRC Hi Mark. I've been wondering about the modifications you made to your TT02. Did you have any suspension, drivetrain or steering issues due to the lowered positioning of the arms? I'm about to build mine and like how you were able to get so much ground clearance. With the center of gravity being higher do you find the car unstable? From your other video with your car running it looks to handle well. Thanks!

@@GreenEyedScotty Hi Scotty. Funny you should ask, I did have a little issue with the steering. Those ball pivots at the top and bottom of the front uprights were at their limits and the steering jammed a little on full lock. Shortening the shocks by a couple of mm sorted that out and I've had no problems since. Still loads of clearance and no issues with stability, it drives very nicely and is way better than stock on rough terrain. All in all I'm really pleased with it! Best wishes from Mark 🙂

@@MarkBryanRC Perfect! Building mine with universal joints so that should negate any dog bone binding issues. Will make sure there is no binding with the arms as you suggested. I also ordered a set of XV-01 springs as they are nice and plush - much better than the stock springs that come with the super mini CVAs. 🏁🏆

Hi Joseph, thanks for the kind words. No problem, the Subaru body fits the 257mm wheelbase. It's unusual to have a body that is 251mm, but I suppose there must be a few out there. I wish you luck with your first TT02 build, take your time and it will come out fantastic. If you need any help, just drop me a comment, but I'm sure you will be fine. All the best from Mark... :)

Hi there and good to hear that you found it useful! No, if you fit tyre foams the tyres usually don't need glue, especially with brushed motors. 😎👌👍

@MarkBryanRC thx for your reply. Its very much appreciated!

@@AsurasWrath164 no worries dude 👌 👍

Hi Pete - here is the name and number of the ball connectors I used: Tamiya 9804205/19804205 5mm Ball Connector Hope this helps! :)

Thanks, Ian! I think the wheels are 26mm wide - they are the stock wheels that are supplied in the kit - all the best, my friend! :-)

Thanks, Michael! Hmm, the ground clearance is limited compared to the TT02B, largely due to the much smaller wheels and tyres of the rally car. The rally car still does very well on the rough though! Cheers!

Thanks very much! Glad you could use some of the tips. As for the diff, when the car is running straight, the gears in the diff don't move, so no, the grease doesn't have any impact on performance. The gears in the diff only move when one side is turning faster than the other (eg when cornering or if one of the wheels is spinning on loose ground). This is when the thicker grease stops the faster moving wheel spinning as much, helping to give traction to the wheel running at normal speed. This all helps the car get traction, but doesn't stress the diff. Hope this makes sense! :))

@@MarkBryanRC that's great thanks! 👍. It goes great off road. Got it to race against my rally modded TT-01E and my XV-01.

Oh yeah, sounds like you have a good time coming up! Great cars to race against! :)

Thanks Kieran! Have fun with that new TT02! As for the stainless screws, I can't find anyone that sells sets for Tamiya cars. I buy bags of 50 or 100 screws of the different lengths (10, 12 and 15mm). Here is a link to the eBay shop I get them from: www.ebay.co.uk/itm/181024489629?hash=item2a25e6809d:g:cf4AAOSwj6lbvJDw

@@MarkBryanRC hey just followed your link and added the following 10mm and 12mm but their is no 15mm in the drop down option will 16mm be alright, thanks for the response keep up the good work 👍🏼

@@MarkBryanRC also is it only M3 required? Cheers again

@@DempZe Yep. you only need M3 screws. TBH you can probably get away without the 15mm screws as there are only a couple in most Tamiya kits, but if you do go for them I'm sure 16mm will be OK! I just use the stock screws when there are only a few of them. :) Cheers!

Thanks Surman! I got the stainless screws from eBay! Just search for stainless allen screws!

@@MarkBryanRCI know you mention they’re 10mm long, what’s the diameter please? 3mm? I’d like to get some in order and don’t have my TT-02 yet. Thanks!

@@simonhinchcliffe Hi Simon. They are M3 machine screws. M3 = 3mm, so yes you were correct! Hope you can get some soon! 😎🤞👍

Hi Martin - thanks for the kind words. If I had the choice, I would definitely go for the Type-S over the standard TT02 kit. There are so many improved hop-up parts included. Mainly, the suspension components are so much better in design and performance. Best wishes from Mark... :)

@@MarkBryanRC Thank you. I will go with a type s and follow your guide. 😁

@@martinhetterich8699 Cool - I know you will enjoy it! :)

Hi - the spacers is from a 5.5mm Tamiya spacer set - here is the link which includes the part number: www.ebay.co.uk/itm/Tamiya-53539-5-5mm-Aluminum-Spacer-Set-RC-Hop-ups/332256704287?epid=175440084&hash=item4d5c0af71f:g:VUMAAOSwhiZaXik4 Without the spacer, the steering arms do restrict the suspension travel. All the best from Mark... :O)

Hello there! You can fit any wheels and tyres with a 12mm hex that have the correct offset, i.e 0! As long as the diameter isn't too big as the tyres will then foul the front bumper and steering links. I suggest a little trial and error, try different wheels and see what works, I'm sure you will come up with something that works for you! Cheers!

Thank you very much! The screws are M3 - 10mm 12mm and 15mm long! Cheers! 😎👍

Hello friend, yes it is good for on-road racing! This chassis actually has it's own racing class in many RC clubs and is highly regarded. Many thanks for the question and best wishes from Mark... :))