How to Build a Winder Staircase

  Рет қаралды 54,127

Kens Karpentry

Kens Karpentry

5 жыл бұрын

Fitting in stairs in a tight space!

Пікірлер: 36
@timbirch4999
@timbirch4999 4 жыл бұрын
I like the way this stair is built - very efficient. Unfortunately, it wouldn't pass UK building regs, due to the narrow end of the winders coming to a point. They have to be just under 2 inches minimum (50mm) over here.
@kenskarpentry
@kenskarpentry 4 жыл бұрын
Thanks. I wish I did make it 2”. The original stairs were about 28” wide super steep and about a 6” tread. I can only imagine how many people fell down those old stairs
@arkansas1336
@arkansas1336 5 жыл бұрын
Excellent results, especially on the 'winders'!
@kenskarpentry
@kenskarpentry 5 жыл бұрын
Thanks
@andyedge7912
@andyedge7912 4 жыл бұрын
Got to say thanks for this video im planning on doing the same job in the new year.
@kenskarpentry
@kenskarpentry 4 жыл бұрын
Nice I hope your project goes well.
@cullenmcgrath9028
@cullenmcgrath9028 2 жыл бұрын
6” minimum at the narrowest point of the tread
@GaryThomsonJoinery
@GaryThomsonJoinery 4 жыл бұрын
One day I might make a winder like you guys in the US, it is far quicker than here in the 🇬🇧, I’ve done a few videos on making them and we do it so different. Thanks for sharing 👍📐🔨
@kenskarpentry
@kenskarpentry 4 жыл бұрын
Thanks
@hugeshows
@hugeshows 3 жыл бұрын
Doubtful this would make code in most places in the US. Ignoring being an 1/8" over on max riser height, the winder section tread is allowed to taper down to 0" and most codes I've looked at state a minimum of 6" at the narrowest part of the tread. The reason is obvious - misplace your foot at that corner, and you drop three steps instantly.
@donhuffer5167
@donhuffer5167 Жыл бұрын
Winders must be 6” at the narrow end. Minimum width of steps is 36”.
@thomo74
@thomo74 2 жыл бұрын
Very neat & tidy ! Do you have a video of how you cut the staircase opening? I’d like to know how you remove the joists and ensure everything is Supported correctly.
@kenskarpentry
@kenskarpentry 2 жыл бұрын
I think I’ve covered it in past videos
@loueber
@loueber 4 жыл бұрын
Kudos to the worker that was wearing the proper resperator!
@kenskarpentry
@kenskarpentry 4 жыл бұрын
Thanks
@donhuffer5167
@donhuffer5167 Жыл бұрын
Code riser height max is 7 3/4”. You must be in a no code area.
@louish.9414
@louish.9414 Жыл бұрын
I had no choice go 8” rise because of height of back basement door.
@vianneydavalos2501
@vianneydavalos2501 Жыл бұрын
Building code says minimum of 3 stringers
@louish.9414
@louish.9414 2 жыл бұрын
I watch many videos on winders only bob Villa had it correct
@louish.9414
@louish.9414 Жыл бұрын
I know code say 6” at smallest end what about winder end?
@josho4971
@josho4971 4 жыл бұрын
What’s going on with your helpers respirator he’s not painting a car . Unless your him out lol just some humor to your video y’all to serious
@kenskarpentry
@kenskarpentry 4 жыл бұрын
There was pretty serious mold when we bought the place and still weren’t quite confident we had gotten all of it. Thanks for watching!
@arlenmargolin1650
@arlenmargolin1650 3 жыл бұрын
Doesn't seem to be too windy I mean you got one turn I guess that's considered a winder I hate to be a whiner
@mkay6089
@mkay6089 3 жыл бұрын
Yeah... But true none the less i was looking to see a winder stair case also.. pah!
@josho4971
@josho4971 4 жыл бұрын
Sorry it doesn’t look like that second step is 8” in rise hope there only temps or you will trip
@kenskarpentry
@kenskarpentry 4 жыл бұрын
Good eye those were temporary. We put in some nice treads and risers.
@builderspluscustomhomesand2146
@builderspluscustomhomesand2146 4 жыл бұрын
Even if it wasn't 8", 7 3/4 passes. Out here we have the (7-11) method. Also just because it's not 8" don't justify that someone is going to automatically trip solely based only on that. lastly in his video, he specifically states it's a temporary set of steps.
@josho4971
@josho4971 4 жыл бұрын
Builders Plus Custom Homes and Remodels Why put that much time into building a temp set of stairs . I build stairs for a living and take pride in my work . Do your math and execute the job like a pro. These guys just want to look important on you tube , Hey everyone look at what I built , then I come along and bust their balls for doing it wrong . Btw 8 1/4” step passes code 7 1/4 - 7 3/4 is ideal
@adammacer
@adammacer 3 жыл бұрын
@@josho4971 Passes code where? - the world is bigger than wherever you are.. Why put that much time into a temp set of stairs? Because they want better access to the upper floor than a ladder perhaps? Sounds like you just wanna sound important and 'I know it all' on KZfaq..
@josho4971
@josho4971 3 жыл бұрын
Proof is in the pudding bud and your pudding is sub par. I build stairs and do them right . I don’t need a you tube channel to make money I do it in real life
Assembly of the KwikStairs Left hand Winder strings,treads and Newel
8:47
Flat Pack Stairs - Kwikstairs UK
Рет қаралды 41 М.
Winder stair rebuild options
6:13
apprenticemath
Рет қаралды 78 М.
Smart Sigma Kid #funny #sigma #comedy
00:25
CRAZY GREAPA
Рет қаралды 25 МЛН
Can You Draw A PERFECTLY Dotted Circle?
00:55
Stokes Twins
Рет қаралды 36 МЛН
LOVE LETTER - POPPY PLAYTIME CHAPTER 3 | GH'S ANIMATION
00:15
How To Winder Stairs
4:20
Ask the Builder
Рет қаралды 119 М.
Super Complex Stair Build: Open-riser Winders made with templates
27:24
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 8 М.
How to build Stairs. Easy steps DIY staircase
6:29
epicdiy
Рет қаралды 4,5 МЛН
How to Build Bomber Stairs part 2
18:02
AwesomeFramers
Рет қаралды 46 М.
Making a Double Winding Staircase
18:02
Gary Thomson Joinery
Рет қаралды 121 М.
Lab 1   Winder Stair
21:45
Glen Martin
Рет қаралды 23 М.
Shop built stairs with extremely detailed drawings | Revealed
18:36
How To Build Stairs
2:22
Sharpimagetv
Рет қаралды 862 М.
Smart Sigma Kid #funny #sigma #comedy
00:25
CRAZY GREAPA
Рет қаралды 25 МЛН