Kens Karpentry

Пікірлер

@user-ge2fb9fh2q 22 сағат бұрын

Great idea when it goes smoothly, horrific when the factory is off especially on corners, or more than likely a foundation that is off, now you stuck modifying something not meant for modification or shimming plates that are visible. Love the videos and the attention to detail, the backgrounds you work in are beautiful and peaceful too, best wishes and stay safe.👍

@kenskarpentry 20 сағат бұрын

Thanks I appreciate it

@josefreck1103 Күн бұрын

Ken tolle Arbeit 👏🏻👋🙂🙋‍♂️

@kenskarpentry Күн бұрын

Thanks

@richardroyles1423 Күн бұрын

Interesting. Thank you. God bless.

@kenskarpentry Күн бұрын

Thanks same to you

@StoneKathryn Күн бұрын

Too bad you woke up to no power Ken! I'm glad you could find what you want between the two stores. I'm so glad you have such a good day. Nice that he gave you some pieces of hardwood. That's great he made a wooden Spatula for Sandy. Even something for the railroad! Thanks for being so generous to Ken Folks, you know who you are! Nice trailer. Might sell it with the trailer? Talk about a mobile home! Level! I'm so glad it's a nice day for you. I'm glad you get to use your air gun. I'm a little confused about the "floor." I guess I'll have to watch more before I "get it." Thanks for this video Ken!

@kenskarpentry Күн бұрын

Thanks. Going to be a fun build

@davidhogge7865 Күн бұрын

Great job, I wish I had that.

@kenskarpentry Күн бұрын

Thanks!

@robertdknight Күн бұрын

So excited about this project. Even more so since you've decided to build on top of the side rails. I like the 2" plus 1.5" insulation to bring up to a nice R-value on the floor. That's a nice touch. I'm curious what the overall height will end up being ... because I don't know what the legal limit is for highway transporting. Fun project. Loving it.

@kenskarpentry Күн бұрын

Thanks height limits are tricky. I’m going to stay under 12’ hopefully

@robertdknight Күн бұрын

Comment

@johnspencer1145 Күн бұрын

Thanks for the video ken that was a busy day

@kenskarpentry Күн бұрын

It sure was

@tomhaire4758 Күн бұрын

looking good Ken, keep it up.

@kenskarpentry Күн бұрын

Thanks

@robertadriver6931 Күн бұрын

Looking forward to future work on the tiny house

@kenskarpentry Күн бұрын

Thanks

@doncc6080 Күн бұрын

👍👍👍

@Prariedog Күн бұрын

Lots of room underneath the floor for plumbing and or storage . Great video Ken. Safe travels ,thx for sharing. Looking forward to the video series .🎉🎉

@kenskarpentry Күн бұрын

Thanks 👍

@brucealvarez9263 Күн бұрын

"They seemed to like Kaiya"??? Of COURSE they liked Kaiya!! Always good to ruminate awhile on design, the end product will be better.

@kenskarpentry Күн бұрын

Right thanks

@carrieemery7191 2 күн бұрын

looks good so far

@kenskarpentry Күн бұрын

Thanks

@sandracunningham2689 2 күн бұрын

Another fun and educational view. I am enjoying your retirement. You are busy but looks like a lot of fun.

@kenskarpentry Күн бұрын

Thanks it is

@michaellane4762 2 күн бұрын

$3000 for a gen, it must be a monster! I would not be without a generator ever again. Mike from Mass.

@kenskarpentry Күн бұрын

It’s basically a whole house

@chetleonard169 2 күн бұрын

go ken Go

@kenskarpentry Күн бұрын

Haha I’m goin

@corvette2007 2 күн бұрын

Don't leave air in your compressor because it will rust the inside of your tank

@kenskarpentry Күн бұрын

Thanks

@krenwregget7667 2 күн бұрын

Hi Ken. Spalting is when fungi get into the wood and cause dark lines throughout the grain. It looks awesome and adds a neat design element to whatever you build with it. I worked with a guy who built the very first tiny house on a trailer in western Canada back in 2014. He had built the first with his dad and needed a real carpenter to come in and refine the process, which I did and showed them how to maximize materials use, proper framing, finishing, etc. He used a flat deck trailer where the wheel wells were inside the width of the deck so we were able to build to maximum width by framing around and over the wheel wells, giving us more interior room.

@kenskarpentry 2 күн бұрын

Wow that’s cool. Thanks for sharing

@barriesmith3489 2 күн бұрын

Ken you give us entertainment and education not that I will ever build any thing but it’s like friends spending sometime together do miss Chad, Dan and Lauren hope I got the spelling right

@kenskarpentry 2 күн бұрын

Thanks. Yup spelling is right

@shirleyannconfer9651 2 күн бұрын

I’ve said it before, but Kaia is just TOO CUTE! The tiny house looks like it’s going to be an interesting project. I can’t wait to see how it turns out.

@kenskarpentry 2 күн бұрын

Thanks me too

@JulieStCyr-lw4hk 2 күн бұрын

Looking forward to the evolution of the little tiny house!! I just downsized to a 510 square foot house and I absolutely love it!!! It’s great to let go of “stuff “ very emancipating!! It’s also wonderful seeing you embrace retirement!!

@kenskarpentry 2 күн бұрын

Thanks. Sounds like a nice house for you

@BullDozerman1000 2 күн бұрын

Hi Ken I was wondering if you still had the trike still for sale and if so how much would you like for it thank you trying have a nice day and may God bless you and your family

@kenskarpentry 2 күн бұрын

Yes I do $1,000. Can you email me at [email protected]

@BullDozerman1000 Күн бұрын

@kenskarpentry I just want to thank you. I just can't spend that much money at this time. Because I am on a fixed income and my daughter said that I should wait once again thank you try and have a nice day I will see 👀 on the next videos 📹 and may God bless you and your family

@katieallen3927 2 күн бұрын

I started watching your channel to learn as much as I could about having a garage built. I didn’t know what I didn’t know. Here I am two years later and they will break ground on my garage build this summer. Thank you for sharing your knowledge and expertise.

@kenskarpentry 2 күн бұрын

WoW congratulations hope it goes well!

@johnmeeks9618 2 күн бұрын

Ken, shouldn’t you put some Tyvek under the insulation to keep the moisture off?

@kenskarpentry 2 күн бұрын

It should be fine the insulation is waterproof and it won’t be exposed to the weather

@DanaFoster-vl5os 2 күн бұрын

Looking good

@kenskarpentry 2 күн бұрын

Thanks 👍

@kchance76 2 күн бұрын

Great start to a fun build. I so enjoy your carpentry videos the most. Like the others also, but this is right up my alley. Thanks for the variety.

@kenskarpentry 2 күн бұрын

Glad you enjoy it! Thanks for watching

@how_to_hallagon1 2 күн бұрын

I sure enjoy your videos ken with kila. Very peaceful to watch with a calm demeanor in these bad times. Your wife has a good partner.

@kenskarpentry 2 күн бұрын

Wow, thank you

@Hosty_Tim 2 күн бұрын

Goooooooood morning, Ken!

@kenskarpentry 2 күн бұрын

Good morning sir

@JB-ej2qy 2 күн бұрын

Kens garage sale is doing great! The free electric bikes should pay for the new generator 👍🍺

@kenskarpentry 2 күн бұрын

Going well

@averagejoesmiling456 2 күн бұрын

This is going to be GREAT! Really looking forward to watching this project progress, Ken.

@kenskarpentry 2 күн бұрын

Thanks me too

@roblamont8756 2 күн бұрын

That ken is one hard workin fella 😊

@kenskarpentry 2 күн бұрын

Haha thanks

@frankboyd7993 2 күн бұрын

I like that the sides are lifted, but it might have been good to keep the center depressed to the original bed of the trailer. This will provide the head room you wanted while pushing cabinets and couches/benches out to the sides. Similar to the old slide in campers that fit into pickup truck beds.

@kenskarpentry 2 күн бұрын

Thanks lots of changes coming already

@frankboyd7993 2 күн бұрын

@@kenskarpentry glad you get to do fun stuff in your semi-retirement.

@hardtimes1132 2 күн бұрын

Ken why not build it like a slide-in Camper It would give you a lot more room with the door in the front and use the built up sides for sinks seating ect.

@kenskarpentry 2 күн бұрын

So plans have changed. It’s going to be permanently mounted to the trailer

@Lee-qp6gf 2 күн бұрын

Just wondering how you will finish the outside of the outside wall where it will step up for the cantilever. Lee

@kenskarpentry 2 күн бұрын

Still working on that

@Lee-qp6gf 2 күн бұрын

@@kenskarpentry LOL, maybe make the cantilever and finish it before you drop it down on the bed?

@bryangiffin9695 2 күн бұрын

Like the new layout of the tiny house on the trailer. It will allow the use of the space under the house to store house-related/camping things like fishing poles, tools etc. Will be watching the completion and mods along the way with interest.

@kenskarpentry 2 күн бұрын

Thanks there’s a lot of storage available under there

@alanb287 2 күн бұрын

Ken, I learn from you every video that you make, be it model trains or carpentry, and especially how to enjoy life. Thank you for all of it.

@kenskarpentry 2 күн бұрын

Wow, thanks. You’re very kind

@loriswain8140 2 күн бұрын

Look at that sweet little farm in the background! Looks pretty nice. I’m sure the chickens are loving their digs!

@kenskarpentry 2 күн бұрын

They are! They’ve got their own castle

@rudyfisher7660 2 күн бұрын

Another thing if you build on top all your piping and everything can come underneath the building because you'll have that little bit of space between the building and the floor of the trailer fort to be able to pipe underneath it running the pipes out wherever you wanna go

@kenskarpentry 2 күн бұрын

Exactly. Thanks

@rupe53 2 күн бұрын

Soooo, what's in the plan to keep this structure on the trailer in case of bumpy roads and hard braking? You can't rely on gravity and drywall screws for that part. Perhaps J-bolts or U-bolts through the finished floor to the trailer frame? Maybe 6 on each side? It needs to be bullet proof out on the highway.

@kenskarpentry 2 күн бұрын

Right. It needs to be anchored well

@jfrodgers7858 2 күн бұрын

Necessity is the mort of invention (or figuring out how to make due with what you have).

@kenskarpentry 2 күн бұрын

So true. Thanks

@pauljackson5482 2 күн бұрын

Hi. Great job Ken, I might have been tempted to still fit the 4x4's have then floating underneath so that they are there when you slide it off the trailer? Cheers.

@kenskarpentry 2 күн бұрын

Right. Plans have changed again

@mjperkolator8854 2 күн бұрын

Another cool project. Your work is amazing.🏠 And I think Kia approved.

@kenskarpentry 2 күн бұрын

Thanks

@larrytaylor7753 2 күн бұрын

Building it on the 4x4s on the floor of the trailer made great skids for unloading. How will you unload it now that its all sitting up on the side rails?

@kenskarpentry 2 күн бұрын

Plans have changed….again

@ronlovell5374 Күн бұрын

He can still under frame it and add the 4×4's, or add 4×4's hanging off the frame and just slide some planks or beams underneath them when it needs to slide off.