Рет қаралды 96,774
Using some scrap 3/4" pine boards cut down to 8 inch squares and some 3/4" dowels I created a spoke wheel. This technique uses the router table and a 3/4" cove bit to set the spokes in perfect alignment.
Support DIY Builds on Patreon:
/ diybuilds
Buy a T-shirt to support the channel:
teespring.com/stores/diy-builds
Visit my website for free plans and see viewer builds:
diybuilds.ca
Follow me on Instagram:
/ diybuilds
Follow me on Facebook:
/ diybuilds
#DIYBuilds
#Woodworking
#DIY