How to Build An AMAZING Foldable Beer Pong Table

Рет қаралды 13,219

3 жыл бұрын

This DIY Foldable beer pong table is a huge seller for me in my local area. I live nearby 2 or 3 colleges and really try and market to that age group. Not to mention its a super fun thing to have for yourself:) You could also pretty easily use this as a little minnie ping pong table if you needed to. If you enjoyed this video and want to learn how to build other cool stuff in the future, please consider subscribing!

Пікірлер: 19

@lilymerchant7670 3 жыл бұрын

Aaayyyooo

@prestige6v 2 жыл бұрын

I'm considering building my own beer pong table, thank you for making this awesome step by step video 😁🎉

@emmawilkinson2661 3 жыл бұрын

boutta be CRUSHING some pong with this table. Thank you Pete🙏🏼🙏🏼🙏🏼

@FishOverChicksWoodworking 3 жыл бұрын

anytime:)

@fdort3971 6 ай бұрын

@Fishoverchickswoodworking thanks for the idea! Can you please tell me the make/model of your drill? I would suggest putting removable dowels in the legs and middle of the top to lock them when you use it. I can use mine for lots of company meals and extra table space in my workshop.

@Jackson-qy3ve Жыл бұрын

Can I use 2x2 instead of 1.5x1.5?

@thriftyeats5671 2 жыл бұрын

good work

@FishOverChicksWoodworking 2 жыл бұрын

thank you!

@Luisppk2812 Жыл бұрын

Do you know that plywood is not good for liquids and even less with beer? With just one or two dropping over your table and is gone in short time. Also, at the first little kick or push near the table, the legs will fall down. you need to reinforce them.

@beckylynn9797 2 жыл бұрын

Do you have the measurements for where you install the legs? Does it matter?

@FishOverChicksWoodworking 2 жыл бұрын

we had them an inch or two out from the corners of the frame. hope this helps!

@beckylynn9797 2 жыл бұрын

@@FishOverChicksWoodworking thanks! I appreciate your video and reply. Trying to make this to use it as auction item for a HS football fundraiser. Hope I nail it! (Pun intended lol)

@beckylynn9797 2 жыл бұрын

@@FishOverChicksWoodworking ok, I have it built but it sinks in the middle. How did you prevent your table from buckling when the two parts connect?

@FishOverChicksWoodworking 2 жыл бұрын

It didnt bow for us until a few months later, we ended up drilling holes on the under side where the two halfs connect. then you can slide a wooden dowel in to help stabalize and take it out when you need to fold it up. hope this can be a good fix!

@Georg3796 Жыл бұрын

My middle is caving in any idea why or tips to fix?

@FishOverChicksWoodworking Жыл бұрын

we ended up having that same problem a few months into using the table. we drilled a hole in the bottom supports where the two halfs meet big enough to slide a dowel through both sides! that solved the problem for us:) hope this helps

@Georg3796 Жыл бұрын

@@FishOverChicksWoodworking I decided to add a single leg to each side of the board right next to the middle connector! I used the small hinge to make them foldable as well so far so good!