How To Build DIY Cedar Planter Boxes

Рет қаралды 49,468

Жыл бұрын

How to build your own DIY cedar wood planter boxes cheap and easy!
#planter #diy
BUILD PLANS: etsy.me/419hDki
SHOP HERE:
Kreg 720 Pocket Hole Jig: amzn.to/3UKbOYm
Strap Clamp: amzn.to/3ogSB4n
1" Brad Nails: amzn.to/43AG0sN
1" Pocket Hole Screws: amzn.to/3UEIdPK
1" Deck Screws: amzn.to/3A8R6ri
Exterior Wood Glue: amzn.to/3mFLz8K
Miter Saws: amzn.to/3eBMxLX
Table Saws: amzn.to/3rZZMMb
Drill/Driver Set: amzn.to/3kw0ezT
Brad Nailer: amzn.to/3lgznHM
Amazon: amzn.to/3KPE6eD
Walmart: bit.ly/3BB0sOp
Northern Tool: bit.ly/3u7C6Zg
________________________________
OTHER TOOLS:
Kobalt 10in Miter Saw: amzn.to/3ezSFEi
Skil Table Saw: amzn.to/2W0ZoRt
Other Table Saws: amzn.to/3rZZMMb
Circular Saw: amzn.to/3N9ddlR
Skil Router Table: amzn.to/3r9bkNW
Jointer: amzn.to/3R4yEbj
Planer: amzn.to/3H9e4ls
Skil Router: amzn.to/33SGq3U
Wen Track Saw: amzn.to/3BfTCM5
Track Saw Track: amzn.to/3kuScHw
Drill/Driver Set: amzn.to/3kw0ezT
Brad Nailer: amzn.to/3lgznHM
Dewalt Framing Nail Gun: amzn.to/3FPkYKe
Drill Press: amzn.to/3odD01x
Band Saw: amzn.to/3TKzKZh
Jig Saw: amzn.to/3G1cmzT
Orbital Sander: amzn.to/3kzktwt
Belt/Spindle Sanders: amzn.to/308z4HG
Shop Vac: amzn.to/2UpolW8
Dustright Dust Separator: amzn.to/3rmzvHq
Duststopper Bucket Separator: amzn.to/3kFIPVq
Clamps: amzn.to/3EGP7Om
Wood Glue: amzn.to/3k93vE7
Kreg Tools: amzn.to/3NgbefC
Follow Us on:
Facebook: / patriotdiy
Instagram: @PatriotDIY
Etsy: etsy.com/shop/PatriotDIY
Thanks For Watching! Please Like, Share, and Subscribe!

Пікірлер: 39

@PatriotDIY Жыл бұрын

BUILD PLANS: etsy.me/419hDki

@keithdavis4452 Жыл бұрын

Love watching your videos. You are so humble and true to your Family and Country. Planter boxes turned out great.

@PatriotDIY Жыл бұрын

Thank you

@user-jz7ve2gj1s 2 ай бұрын

lovely as a DIYER this was great - thanks again ;; keep them coming

@greenhornadventure Жыл бұрын

Great video. Really clear and easy to follow. I've made similar planters using basically this design, and they turned out nice. One thing I did differently was to have the leg widths differ, as opposed to the stretchers, so all four sides were equal. One wide and one narrow leg on each side. After the sides were assembled I made a shallow saw cut on the table saw right over the vertical joint between the leg pieces and another on the face of the other side, creates a nice corner detail and camouflages the seam. Another thought, if you're going to paint them just screw them together on each corner and skip the pocket holes. Longer screws can be use that way and easily hidden with a dab of wood filler.

@nathanswoodcrafts Жыл бұрын

Those turned out fantastic. 👍🏻

@elitelawn9547 Жыл бұрын

Great build and simple....thanks!

@builditwithlogs3917 4 ай бұрын

I bought the plans and built two of these as I really like the look of them. I had a hard time keeping everything square when attaching thr two L shape halves. I ended up with a slight wobble in both planters...for the life of me I cant figure it out as I took my time with all my cuts and measurements. In the end I eliminated the wobble and am happy with the finished product. Thanks!

@billm4560 Жыл бұрын

Those turned out nice! 👍🏻 Thanks for sharing!

@PatriotDIY Жыл бұрын

Thanks!

@larrystone5749 Жыл бұрын

Good job and project thx for sharing

@keithwilliamson236 Жыл бұрын

Great job. Is there a reason for the backer boards not going the full length of the frame to give it a finished look instead of leaving a gap all the way around? I'm thinking to get the most out of each picket.

@PatriotDIY Жыл бұрын

Only because its not necessary

@86abell Жыл бұрын

Nice looking planter. Question, Why did you use interior pocket hole screws? They won't last very long in the elements.

@PatriotDIY Жыл бұрын

It's what I had. 1" exterior pocket screws are hard to find

@ron0126 Жыл бұрын

@@PatriotDIY yep ... I was looking for some this past weekend. I think the only way to get them is online and even then, they're not that easy to find. Armor Tool is about the only place I've found them.

@cjscala87 Жыл бұрын

How did you get the pocket holes drilled on the diagonal cut of the top trim

@PatriotDIY Жыл бұрын

Kreg 720 pro

@AndrewIrizarry 10 ай бұрын

If I were going to make these to put pergola poles in, would it be prudent to not have legs on them for the weight? What about drainage?

@PatriotDIY 10 ай бұрын

First I'd say yes, no legs is probably a good call. But using planters to support Poles usually doesn't support the weight the way you think they will. What I've done in the past is run the pole directly into the ground and just put the planter over it for looks....like this kzfaq.info/get/bejne/nc51pbaq3qm0e2g.htmlsi=QD1Fx3t6Rs04j-Ye

3 ай бұрын

Where do I download plans?

@PatriotDIY 3 ай бұрын

Link in the description

@jameslikos3726 2 ай бұрын

I must have done something wrong, because my 1" pocket screws won't sink in alll the way. I need some assistance as to what I've done. Thanks.

@PatriotDIY 2 ай бұрын

The thickness of fence pickets can very a little bit, yours may be a little thicker! If the 1" doesnt work you can Try 1.25" pocket screws You shoukd also check the settings on your pocket hole jig to make sure it's set correctly for the material thickness

@jameslikos3726 2 ай бұрын

@@PatriotDIY also, will you explain how you did the diagonal pocket holes for top piece

@PatriotDIY 2 ай бұрын

@@jameslikos3726 I just used the kreg pocket hole jig and referenced the mitered edge

@Hustle.central Жыл бұрын

How much should I sell these for? On fb marketplace

@user-go5od1ef1m 4 ай бұрын

It greatly depends on your area .

@RandolOlah Ай бұрын

I live in Ester, NC. I sell them for $30 a pice. I just use Brad nails and glue, I don't see the reason for pocket hole screws.

@thumbwiz Жыл бұрын

You should have included the cut sizes in your video.

@PatriotDIY Жыл бұрын

That's all in the plans! Check the link in the description

@thumbwiz Жыл бұрын

@@PatriotDIY Most instructional videos include the cut list in the video or the description, and also include a link to paid plans.

@PatriotDIY Жыл бұрын

@Les Ganton the video is about the design and the methods for building it, you can make any size planter you want with whatever dimentions to fit your needs. Cut sheets for this exact one are in the plans

@user-go5od1ef1m 4 ай бұрын

Buddy just admit you're too cheap to pay for the plans.

@thumbwiz 4 ай бұрын

@@user-go5od1ef1m Of course I'm too cheap to pay for the same plans available for free elsewhere. Brighten up a bit would ya.

@ryans.8294 7 ай бұрын

I've built a few of these planter boxes. I've never used pocket screws, seems very over engineered and unnecessary. They hold up fine without them but anything to justify the cost of the jig. 🙂