I want to send you a photo of my very first build. I used your how-to's on this project and would never have been able to build it without your concise and totally understandable video tutorials. I want to send you some pics, but have no way to do this. So I just want to let you know that my bike is a totally AWESOME project. I call it --- "The Hawg". THANK YOU SOOOO MUCH for your video series. I don't think i would have been able to do this without you. I am sure you hear this every day. But I extend my gratitude to you TENFOLD. You are --- AWESOME. And a God-Send to the amateur bike builder like myself. And the bike I put together is a Roadmaster Granite Peak 18 speed mountain bike that just seems to --- FLY --- down the road. I have viewed a few "OTHER" how-to videos and they were NOTHING NEAR what I found when I found YOUR video series. THANK YOU SO MUCH. Sincerely and Gratefully yours --- Michael R. Beals.

Thank you, your videos sure helped me.Much more than trying to read an online manual.Thanks again.

your the best hugh. ive learned quite a bit from you. ...kenny G new port richey ,fl.

Thanks for your vide I watch 30 of them this is the only one I learned from and thanks for the clear high volume all others I have to read lips.

Thank you friend this helped all my confusion

GREAT INFO ON THE CHAIN

First off let me just say your videos are the bomb! I am just about to start my first build and feel confident with the help of videos. I bought a used 2 stroke supposed to be in good running condition. My question to you would be ...the motor sat out side for several months and I need some advice on how to go about getting it ready to be assembled. I have watched full assembly of motor, I just need to know how to lube/grease the motor itself. Thanks Again for the fantastic job you do. Gene

Great video!! Well explained A++

Hey Thank you Sir. Got my kit from Bikeberry and it was a little short on instructions.

Do you need a chain tensioner or can I just cut the chain to length

Perfect Construction

Awesome video, well explained...

Your video help me thanks 👍

Good job man, Thx!

Great video

THANK YOU FOR SHARING

This video is extremely helpful

Thank you it's a good vid u learnt a lot

I haven't seen a video of yours where you had upgraded the bracket to hold your fender on the beach cruiser. Of course I can't find it now but what was that little bracket that you had used to lock your fenders in

learned alot for my mongoose beast fat tire, question how do i make the chain not hit on the tire ......

Really helpful thanks heaps.

I TOOK THE TIME AFTER I SAW THAT YOU ARE HOUSTON MOTERIZED TO MAKE A GOOGLE ACCOUNT JUST TO LIKE YOUR PAGE YOU ARE VERY THOROUGH VERY DESCRIPTIVE EXCELLENT JOB

Would this work on a bike chopper?

Would like to put a coaster brake on my bike. Do you do that for people?

I mounted tensioner to frame. Goin to bend bracket a bit with a large pipe wrench , to keep it line with chain. Moving engine is a pain.

Chain work is a lot easier with a chain breaker/popper

is the master-link / half-link reusable? or do you gave to use each one to each time you resize chains?

These videos are so helpful! but i have one question. i just ordered a huffy cranbrook, and ive seen many people say the coaster brakes are dangerous at high speeds. I went ahead and ordered new normal hand brakes for the bike, but i want to know if im supposed to disable the coaster brake in the rear wheel, or just keep it and never use it. I guess the main question is, if i dont disable it, is it gonna be a problem for me later on, or is that more unnecessary work? Thanks!

@hughes motorized i have a schwinn occ stingray chopper 2006 80cc 2stroke. How tight do i need to have the drive chain without the chain tensioner?

My chain came off when I hit a pothole. How do I put it back on the sprocket? Do I have to remove the back wheel, or can I roll and pop it back on like a regular bike?

Chain tool won't do the work for breaking the chain? Why grinding machine?

will the #40/420 chain fit on that rear sprocket Sir? thanks

Chainbreaker. Less than $15

How do you spin that gear? Whats the tool you used named? My chain broke n i got a replacement currently trying to break some links out of it maybe like 5 for it to fit fine.

How did you get the drive cog to fit with the 'back pedal' brake?

Hello do you know how to install an exhaust on the four stroke,the original studs are too long for installing the kit exhaust??

What do I do if my chain that comes with my kit fits my back sprocket but not my front sprocket is seems like the front sprocket should be for a BMX chain

Does anyone know what to do if I lose the pin? Or where I can get a new one?

what are the options if you don't want the Coaster break?

the sprockets outer toothed edge is away from the center of the rim which changes the alignment of the chain in referrence to the front engine sprocket. Which side of the sprocket should face out?

I know this was 6yrs ago but my wheel is locked up when I put the chain is on

bro im having trouble with my motorized bike.. how can i fix the chain rubbing on my tire.. im using beach cruiser 26x2.195 tire.. what should i do??

what brand bikes would you recommend for these kits?

Hi, what size is this chain? Because my chain that came with the kit broke, and I bought a 415 and it doesn't fit. it's too big!! :(

Do you know what size the rear sprocket is

Orlando .. You can buy a new pin from Bikeberry or Gasbike.net

12:55 what if you stripped them and cover a real pain in the leg to get off .. what to do ? thanks

If you cut the chain and found out it was too short... can it be fixed??? Plz help😞

chain breaker. no steuggles

I pull the bucking bar to greased it, and some of the ball bearings came out. Any suggestions on how to putt them back in place. Thank you.

When I put the little pin belong to the cluth (shaft) is almost all inside. Abd I dong know how to adjust this lilte piece to get disengage. Do you know what is the problem?

Eugene or anyone, could you PLEASE help me! I've got a problem with my chain. I don't have a chain tensioner (roller) and my chain goes off either front(engine spr.) or the back sprocket. I need to know whether a chain tensioner would fix things or i should pull the chain by moving the engine a bit up. I was told that those plastic tensioners last for too short and is best not to put it but i don't know. I think it wouldn't be good to stretch the chain that much (as with no tensioner). Please, advise me how to proceed! I just want to ride and not worry the chain could go off the the sprocket (because of slack)!!! Do those rollers really get bad very fast. What should i do???

The metal cover to mine doesn't wanna screw in all the way. Do you know what it could be?

Would be easier if you used a chain breaker tool available from any bike shop for a couple of pounds

Someone please help me! I've got my chain and everything on good and tight, but there seems to be a problem with my clutch. even pushing in the clutch arm by hand, I can feel resistance, but it doesn't disengage the clutch. What do I do???

Am putting together my first motor bike. pain my azz. The chain tensioner is at an angle . Am sure with all bikes. I'll explain. Chain goes straight line front to back. The frame that holds the rear wheel is angle maybe 10 -20 degrees.tensioner mounted to it will not be inline. I need to bend tensioner or something. Am sure tensioner will premature wear out if not lined up. Another video says skip tensioner and readjust motor till there's no slack. May consider that

My back tire won’t spin when I hold the clutch

What kinda chain is that

my chain keeps popping off rear sprocket.......Any suggestings plz

what kind of chain is it

He wouldn't have had to take it off the bike if he had a chain breaker

to easy to go to walmmart and get a $5 chain breaker right?

My rear tire is like stuck I can’t even pedal what is it I’m goin crazy trying to figure it out ???

you do know that not everyone has grinding tools....right?

am I the only one who noticed the gas tank next to the grinder

You don't need to have the case off just have your clutch push the motors gear and insert one end of the chain and under the gear with your index fingure spin the so the chain rolls

How many teeth are on the sprockets

didn't to much justice, I just quit and will sell my bike.

Well donw vifio, informitave

These Chinese do not know how to even send customers a chain which is the correct size with their kit… maybe include a tool to install the chain instead of leaving it to the customer? The engine runs perfectly, it’s the chain which kept snapping to the point where it ended up too short as links went missing every time. Now been sent a new chain which is too long and I cannot make it shorter. Going to have to send it back and request a chain which is the correct size as advertised smh

I've been trying 4 hours and I still can't shorten the chain I'm about to throw the whole new motor in the trash its very aggravating

wouldn't it have been easier to use a proper chain tool??