How to Build TMR Ultimate Trailing Arms

No video

How to Build TMR Ultimate Trailing Arms

Рет қаралды 1,010

Жыл бұрын

I wanted to make this video to show how I put my TMR Customs trailing arms together and how you should NOT do it the way I did. This concept can be applied to most any trailing arm build.

Пікірлер: 16

@MischiefMakerTV Жыл бұрын

Great job, Kevin! 😀🤘🏻 I really appreciate the time you took to explain every step

@Chasing518 Жыл бұрын

Thanks Hollie! Just trying to be more like you!

@ShowMeThePony Жыл бұрын

Great video Kevin! My favorite part was the welding and grinding around the Acetone jug and soaked rags😂 I too like to live dangerously 👍🏻

@Chasing518 Жыл бұрын

I lose a rag or two occasionally…..😂

@daleexshaw3958 Жыл бұрын

Great video your honesty is what makes it awesome, I’ve only gotten good at my trade from messing up and owning it you got a new sub👍👍

@Chasing518 Жыл бұрын

Very kind. Thank you!

@tomt1742 Ай бұрын

unless you put a temporary counter truss on the opposite side before welding it's going to bow ! stitch welding of the plates can be performed on the outside first, then move to the inner side to prevent some of the inside pinching of the shock mount channel. make good 1/4 inch tacks with the mid ! great video !

@Chasing518 Ай бұрын

Great tips! Thanks for watching

@seantbr2019 Жыл бұрын

I'm a heavy equipment welder and I always tell people who critique their welds when I cut apart loader buckets to rebuild them with thicker ar plate the bird crap booger Welds that have been holding this thing together for the last 7 years or so did a great job and yours look nowhere near the crap that I've seen so I think your doing great

@Chasing518 Жыл бұрын

Thanks. Since welding these arms up, I have realized a HUGE problem I was having was visibility. I have since gotten an Esab A50 Sentinel helmet and can now actually seeing what I am doing!

@seantbr2019 Жыл бұрын

@@Chasing518 I like those !!

@jonkowalski8190 Жыл бұрын

Just a thought. When I make my shock spacers for welding I make them .015” wider than the shock mounting width. But I make them as big as I can on the OD. I think this helps to keep the plate more parallel when welding than having a small od like your spacers. I just built a bomber fab chassis and all my link pivots and shock mounting locations slide together perfect after welding with just adding .015” extra. Maybe something to try in the future.

@Chasing518 Жыл бұрын

That is a great idea! I will have to make some on the lathe. Thank you.

@anthonywoodall8854 Жыл бұрын

Question to help the algorithm…did you talk to tmr or anyone else about how they keep them from bowing?

@Chasing518 Жыл бұрын

Thanks for the algorithm boost! I did talk to TMR about the warping and they said even in a fixture it is hard to avoid. They said welding slower is the best fix.

@anthonywoodall8854 Жыл бұрын

@@Chasing518 sweet, thanks for the response. Would love to see a video on how you did your full hydro. I remember seeing the stories on it and was super intrigued.