How to build your first FPV drone in 2024? | Watch this 54 min step by step tutorial

Рет қаралды 9,951

Күн бұрын

Parts list:
Frame: Speedybee Master 5 HD V2
Stack: MEPS F7 + MEPS 60A ESC
Motors: MEPS SZ2306 1750 Kv 6s motors
Vtx: Runcam Link WASP
RX: Betafpv 2400 Nano ELRS
For MEPS products, you can only purchase them at their website at the moment. (Affiliated but no extra cost for you)
MEPS F7 HD FC:
www.mepsking.com/f7-fpv-hd-fl... HD
MEPS 60A ESC:
www.mepsking.com/sz60a-6s-4in... 6S
MEPS 2306 1750KV
www.mepsking.com/sz2306-fpv-b... grey
Runcam Link WASP
www.mepsking.com/runcam-link-... Link Wasp
BetaFPV ELRS Nano Receiver:
www.mepsking.com/betafpv-elrs... 2.4GHz
BetaFPV ELRS Light Receiver: (Option)
www.mepsking.com/betafpv-expr... 2.4G-Tower Antenna
Dirt Cheap Solder Station i use: amzn.to/3xtuh3Y
Looking for lipos? Check out CNHL (Affiliated but no extra cost for you)
chinahobbyline.com/?ref=1POZw...
Below are unaffiliated Links:
Speedybee Master 5 HD V2:
www.speedybee.com/speedybee-m...
BetaFPV NANO ELRS:
betafpv.com/products/elrs-nan...
Have some questions? Leave a comment below or message me at my IG account.
iflyxwing?i...
P.S. This is the longest video I ever made so far…I spent approximately 20 hours in total so i really hope this video can be beneficial for some people that is trying to build their first drone! If you like it and think it is useful please like and it with someone, if you don’t like it….please share this with someone you don’t like 🤣
Want to support me? I am running this channel fully self funded and it is a LOT of work, so if you feel like want to support my channel to keep me going? Please subscribe and hit the like button Or please buy me a coffee! Thanks in advance!
bmc.link/iflyxwing
0:00 Intro
0:51 Essential Parts
3:57 ESC Solder & Installation
15:01 FC Solder & Installation
17:02 Test for shorts with a Short Saver
18:02 Motors Solder & installation
23:13 ELRS receiver Solder & Installation
28:38 RunCam Link WASP solder & installation
35:17 Betaflight Setup
45:16 1st flight test - Untuned
47:06 Betaflight UAV Tech Tune
50:19 2nd flight test - Tuned & review

Пікірлер: 46

@dwaxv8 Ай бұрын

Excellent mate, love how you documented the mistakes...building drones is seldom a straightforward affair at least for me 😂😂😎. Tempted to build this excellent work 👌🏾

@iFLYXWings6589 Ай бұрын

Glad you found it useful LOL, Pretty happy with this build ~!

@kavorka8855 Ай бұрын

You managed to build, tune and test a freestyle drone from scratch in 50 minutes! Impressive! Thank you so much and this tutorial I will come back to it when I receive my transmitter and other parts to build my drone. I bought a speedybee mario 5 frame, but I think it's almost similar to yours. Thanks again 🙏

@iFLYXWings6589 Ай бұрын

Glad you found this helpful, good luck on your build

@SebastianMeinel-ty8wh Ай бұрын

Thank you for this Video

@Mr._Resistor 3 ай бұрын

You made me want to start with KZfaq again

@gaylekakac313 2 ай бұрын

Awesome!

@iFLYXWings6589 2 ай бұрын

Thank you!

@mkrakiul3948 3 ай бұрын

thanks ❤❤❤

@RYCOFPV 8 күн бұрын

Great🎉🎉🎉🎉🎉

@user-qf2ck8ih7p 3 ай бұрын

👍👍👍

@Filamiz 2 ай бұрын

Just suggestions and tips, it looks like you need a magnifying glass or a camera that has a macro lens to explain this project. it makes it easier for us to see what you see because the object is very small and helps us in the explanation you are giving

@iFLYXWings6589 Ай бұрын

Thank you for your suggestion. So far, dont have the funds to upgrade my gear yep, but looking to do it eventually

@VladRum 9 күн бұрын

The soldering makes me crying

@decadesekio4570 3 ай бұрын

終於成為影集長度的創作者了嗎 lol 封面縮圖越來越有料了

@iFLYXWings6589 3 ай бұрын

剪的可累哈哈下次還是弄短點的 😂😂😂

@3xpos3gov3rnm3nt5 27 күн бұрын

Dope video. This may be my first build but would have to go analog. Thanks again. Also, is that first park located in Riverside?

@iFLYXWings6589 24 күн бұрын

Glad you found it helpful. the first pack was in Redwood Grove actually

@3xpos3gov3rnm3nt5 23 күн бұрын

Oh Nice! I take my kids to the Richard Nixon Library which is actually around that area. Looks like a chill spot to fly at. Happy flying

@sohelmahamudhridoy4618 2 ай бұрын

that's how you can assemble all your fpv drone parts it's more easy . & you should know how soldering

@MrFadjule 3 ай бұрын

The XT60 mount built into the tail is probably the nicest feature on this frame, why not use it?

@iFLYXWings6589 3 ай бұрын

I think you are referring to the Mario, this one is the master 5

@752castro 2 ай бұрын

does this VTX module have a receiver like dji o3 module has ? are these motors better than 2306 xing2 motors ?

@iFLYXWings6589 2 ай бұрын

Yes, the Vista also has a receiver build in, which you can potentially use it with your DJI Remote 2. As for the motors, i havent tired the 2306 Xing yet, but what i can tell you is the MEPS one I use seems to be preforming just ok

@ralphmaalouf9401 2 ай бұрын

So if you want to use the dji controller you use the yellow and black cables?

@iFLYXWings6589 2 ай бұрын

Yes that will be using the SBUS

@752castro 2 ай бұрын

O tamanho do cabo da câmera dessa unidade aérea é o mesmo tamanho do cabo da câmera da unidade aérea da DJI ? ou tem que colocar um cabo maior ?

@iFLYXWings6589 2 ай бұрын

if you meant the coax cable then yes, same length

@diegoarmandogarciacifuente5933 13 күн бұрын

Que bien tu trabajo. Pero la construcción del dron tiene soldaduras muy malas.

@wesleybremer1275 Ай бұрын

What are the exact lipo batteries you use for this build

@iFLYXWings6589 Ай бұрын

Generally, 6S 1100/1000 mah 100-120C lipos is generally the daily driver. I use CNHL Black series 1100 mah 6s and Ovonic 6s 120C 1000 mah

@ho9ssem244 27 күн бұрын

As for the lipo, I thought about getting a 6s 22.2 v 1550mhA, do you think it's compatible? I saw on the Mepsking website and it says it supports the 6s so I shouldn't have any problems? then the weight is 280 g, do you think that's a lot?

@iFLYXWings6589 27 күн бұрын

Yes, 6S is compatible, for the capacity will suggest to stay within 1100 - 1550 mah range

@ho9ssem244 26 күн бұрын

@@iFLYXWings6589 Thank you so much for answare mate!!

@bry.7 2 ай бұрын

How much is the price+controller+google

@iFLYXWings6589 2 ай бұрын

For this setup, you range of pricing will be as below DJI compatible goggles: $300-$450 Radio ELRS: $60-$300 If you want a recommandation below are your options DJI Goggles: DJI V1/V2 DJI Goggles 2 or DJI Intergra ERLS Radio: Radiomaster TX12 / Zorro /Boxer / TX16/ Pocket

@dragon-of-the-west-1 29 күн бұрын

What battery u use?

@iFLYXWings6589 29 күн бұрын

6s 1000 - 1500Mah, personally I have a lot of CNHL black 1100 mah

@dragon-of-the-west-1 28 күн бұрын

@@iFLYXWings6589 u have link ?

@dragon-of-the-west-1 26 күн бұрын

@@iFLYXWings6589 can u sand link?

@male_walk 3 ай бұрын

This frame is really bad when untuned

@iFLYXWings6589 3 ай бұрын

Yes … I can confirm that… it is terrible when untuned. I also include a clip in the video with the untuned flight

@richardburrows1610 3 ай бұрын

So, tune it!!!

@iFLYXWings6589 3 ай бұрын

@@richardburrows1610 It is ... at the end !

@BeachbumfromBrick 12 күн бұрын

My first build. Man, isn’t there a AWESOME build with good distance and flight time w/goggles for a good price? Not assembled? I see aliexpress crushing prices and etc.. just need a list that is compatible from that cheap Chinese route for first drone .. Some like goggles I’ll spend mula. Picking. Is TOUGH