In this video I'll be showing how to bypass a factory external amplifier and just run your speakers off the the amp in your aftermarket headunit! Link to get the wire kit shown in the video: ebay.to/2VyHaBg
Пікірлер: 107
@henrychinaski52232 жыл бұрын
Love your explanation of the bypass harness. I will be doing this on my son's '03 Ram 2500. You clarified very well the interconnect plug between the head unit and the OEM harness, plus the red wire for power with the key on. I have been watching videos and researching until I'm near blind trying to figure this out. I think I have a handle on it now. Good job! I have been installing car sound systems since the '70s, but the car manufacturers have made things more complicated as the years go by. The Infinity system is an odd one. The door speakers are essentially sub woofers with mid range and tweeters in the dash and pillars...at least on the Ram.
@Tegelane54 жыл бұрын
Nice work but I think I would had taken 4 or even 6 RCAs from radio to back. And used 4 channel amp to power factory speakers and D-class amp for woofer. But this shows what is needed if someone wants to just use their aftermarket radio without any amps at all.
@JeepSrt-dr9fg2 жыл бұрын
Awesome Video! I have on 05,06 and 07 GC 💪 now if this needs done I know where to come
@brettsroberts4 жыл бұрын
Extremely helpful showing how to use that amp bypass wiring harness! Thanks!!!
@erikc39364 жыл бұрын
Great video. This is a huge help. Now I understand my bypass harness kit much better. It makes much more sense seeing it. Being installed and not just reading about how to do it.
@KhaiMahase Жыл бұрын
So I basically unplug the stock harness, and plug this new one in and run it to the head unit?
@edwinchrisman15933 жыл бұрын
Great video brother! Everything I needed to know to hook my stereo up! If you did not make this video I would had be out of luck!
@Hc-mn4qp Жыл бұрын
Man love all the videos you do keep up the good work. Maybe you can help do you know if a 2017 grand Cherokee overland have a anc system in the Jeep
@Kieryboo5 жыл бұрын
Great video, man. I stumbled across it for one reason or another not needing the tutorial (I really like the stock head unit in mine-I have the nav system in my 2007 Overland and 6 disc changer w/mp3 in the 2005 Laredo), but you are well explained and this seems easy to follow! Will do if I ever decide to upgrade! ;)
@Kieryboo5 жыл бұрын
I'm sure that said, there is an easy way to add a sub off the stock system as well with a second amp, but as mine came with the "Premium Sound" I already make enough bass to aggravate my neighbors Lol
@ParkerTheBasshead5 жыл бұрын
I really appreciate it! Glad you found it informative.
@rickyknowles79945 жыл бұрын
How did u use the factory amp in the first place the factory amp turn on wire i cant seem to find
@AveryRice473 жыл бұрын
Where did you get the wiring harness from?
@user-tr3kk2qu7s10 ай бұрын
what were the other wires in the harness for other than the speaker wires? ya know the ones you said in this video you didn't know what they were for?
@Ikoleb3 жыл бұрын
Gracias por el vídeo ! 👍🏻👍🏻
@chrisandshazza013 жыл бұрын
Excellent - I have the same vehicle and was very helpful. Kudos to you 🤘🤛💪
@Mark-wp4lw3 жыл бұрын
Nice video but just tap into the power outlets as they are switched and will be more than enough of a "remote" turn on. Those fuse tap things always end up coming loose at some point.
@hervewasson51733 жыл бұрын
Hi Parker, thanks, good job. Well, I'm French and own a 2006 WH (WK with a diesel) with also a REJ head unit and a Boston Acoustic. Maybe I'll plan to replace the head unit with a touchscreen Android. I guess I won't need to keep the Boston amp. My question is : does it exist a connection harness to connect together the 2 plugs removed from the amplifier and connecting the inputs and the outputs directly after have removed the amp. I mean, that way, don't need to re-install an entire long harness from the back to the front ? Great video. Thanks. Herve.
@nelsondejesus51239 күн бұрын
O hell no that's a lot of wires to run back n forth lol I will bypass this Old skool style 😂 I want an amp.
@JohnM-lf7sp11 ай бұрын
Does you have a wire harness not being used above your amp im curious what it is
@glenncruddas1634 Жыл бұрын
Hey man I have everything connected except the on off switch. Will I still get power to the radio without that connected?
@trevionwilliams23283 жыл бұрын
I bought the bypass kit and after a day my speakers went out and I put some new ones in and it started staticing what could be causing that
@mattgehrke Жыл бұрын
Did u need to install a interface when u installed a aftermarket cd player? My 05 cherokee has the boston acoustics sound system
@westsidesagittarius31034 жыл бұрын
I have a 06 grand Cherokee with aftermarket radio and factory amp there's only bass on the left side of my car non on the right how do i troubleshoot the factory amp? I wired up the speakers perfectly
@joeblochlinger5 жыл бұрын
Does your jeep come factory with the infinity system? Where do the speaker wires from back of the aftermarket head unit tie into? Also what harness did you use?
@habibrahman54712 жыл бұрын
Would this work on a 2010 Jeep Grand Cherokee I am seeing no wiring kit for 2010 just up to 09
@mycar1942 Жыл бұрын
Can i keep my steering wheel controls with a amp bypass
@dakotaholland30953 жыл бұрын
So if I were to bypass my stock amp and remove it.. if I were to install after market tweeters, where do I wire them to? They're just small 50w rms 200w max ds18 tweeters.
@roodleezlatanpierre87393 жыл бұрын
How can i buy a new amplifier card for my Serius Radio
@roodleezlatanpierre87393 жыл бұрын
🇭🇹
@brink54343 жыл бұрын
Do you tap the factory wires that were plugged into the factory stereo into the amp bypass wires?
@evchopstic76812 жыл бұрын
which wire is for illumination? and how many from the harness did you not use??
@LegacyThoughts4 жыл бұрын
When the volume is all the way down do you hear any static from the speakers? I installed an aftermarket radio and I hear static when the volume is turned all the way down. I think the factory amp is the problem. This is in a Honda element with factory sub woofer and factory amp. What would you do if you were me?
@benjaminsuciu9883 жыл бұрын
Would I lose my steering wheel controls aux and etc by doing this?
@iphone3gsdivine6 ай бұрын
Any body know the rms watts for that amplifier?
@Ducking_Fustin3 жыл бұрын
Did yours originally have the boston acoustics system? Mine seems to limit the db on the speakers after a certain point, and the front 6x9s don't play mids
@laceclark7364 Жыл бұрын
How long did it take you to do this from start to finish
@blueantlers Жыл бұрын
Where did you get that single din?
@joserangel5601 Жыл бұрын
Where did you order harness from?
@gavinwittenborn93613 жыл бұрын
I got the same tool kit
@scottpearce17924 жыл бұрын
Will this work with the Boston acustic system and Factory Nav unit?
@wwclark2 жыл бұрын
We’re you ever able to do The Boston acoustic amplifier
@r.d.10564 жыл бұрын
So the other wires were not used?
@steviesteviec26225 жыл бұрын
Great job
@whatbass48043 жыл бұрын
Where did you get the wire kit from
@cklinejr15 күн бұрын
Bro slow down on your panning.
@yumajosh37104 жыл бұрын
How did you add an aftermarket amp when you already had a factory one
@hoyt_arms3 жыл бұрын
Just buy aftermarket amp and run all new speaker wire and bammm. Factory amp problem solved lol
@RAAUUULLLL42684 жыл бұрын
Where is the stock sub located?
@hotnewsupdates4 жыл бұрын
I have a 2007 Jeep Laredo. My front right tweeter makes a cracking or popping sound at high volumes. It sounds like you’re putting a needle on a record. I replaced both tweeters with aftermarket but the problem persists. I’m struggling to determine what the problem could be. Potentially bad wires running to the tweeters? Bad amp? Do I need an aftermarket stereo? Any help would be greatly appreciated.
@diegocuriel72894 жыл бұрын
If you haven’t bypassed the factory amp, that is most likely what it is. If you have bypassed it, it could be a number of things. If you’re running more power than the speakers can handle, that could happen. It could be a wiring issue. Look at the specs and make sure everything is cherry
@joshvanzetten54425 жыл бұрын
Where can I find this wire harness at for a Dodge Charger 2008 model can anyone help me out
@MrRobwilliams770335 жыл бұрын
Crutchfield. Com and type in your vehicle. They have the harnesses. I purchased several for different vehicles
@rp420694 жыл бұрын
Crutchfield did not have this 1 so I ordered it from metra
@moneybaggpurp30675 жыл бұрын
Love your video
@ParkerTheBasshead5 жыл бұрын
Appreciate you bro!
@josemata55955 жыл бұрын
I'm trying to by pass infinity gold amp 2002 jeep Cherokee laredo
@MrRobwilliams770335 жыл бұрын
Crutchfield has the plug and play harness that you need. I did this for a 2006 Jeep Commander and a 2000 Jeep Grand Cherokee Laredo
@Wyatt_Craig54 жыл бұрын
RobWilliams77033 link?
@jonprice784 жыл бұрын
Parker, Do you still have the CRUX can bus module that you removed in the video? Would you like to sell it cheap if so?
@ParkerTheBasshead4 жыл бұрын
No I sold it alright, sorry!
@jonprice784 жыл бұрын
@@ParkerTheBasshead Thank you for replying!
@txknightrider825 жыл бұрын
great video , do you know if the 02 come with this factory amp?? thanks .
@ParkerTheBasshead5 жыл бұрын
If it is the infinity system it definitely does have a factory amp. If it doesn’t have the infinity system them I’m not sure
@txknightrider825 жыл бұрын
Parker Dacchille ok thanks. reason i was asking i placed a Sony hi power with all new pioneer two ways & i cant crank the volume more than half ways , if i do it starts cracking popping. distorted sound .
@ParkerTheBasshead5 жыл бұрын
Sid ok yes I would imagine it must have an amp then and sending in high level signals is causing the factory amp to distort.
@yusufjorgenz59514 жыл бұрын
@@ParkerTheBasshead the 2005 has a Boston acoustics factory Amp
@patrickmobley5874 жыл бұрын
I'd really appreciate your thoughts! I tried running the bypass wires into a Boss bv9386nv stereo and all of the speakers work, except the front right. Not only that, the speakers that do work are much, much quieter than when they were running on the factory amp. I have two Alpine 6x9s in the front and stock speakers in the rear. Any help at all is REALLY appreciated. I can't figure it out!
@rp420694 жыл бұрын
Stock speakers are 2ohm and aftermarket are 4ohm. Upgrade the rear speakers
@Pairofrickowens2 жыл бұрын
did u ever figure it out? im upgrading my headunit soon and will need the bypass harness i have 2 jbl 6.5s speakers in the rear
@thejerkmonkeyznutzboltzski5343 жыл бұрын
Would it be less work to just run wire from doors speakers direct to speakers and you can use thicker better wire???
@thejerkmonkeyznutzboltzski5343 жыл бұрын
Run wire from speaker to amp
@ParkerTheBasshead3 жыл бұрын
Yes maybe but this takes the guess well out of it for your average person
@anzor_mtchedlishvili3 жыл бұрын
are the steering wheel buttons working after this?
@bigbootyfela5433 жыл бұрын
No
@dmlong473 жыл бұрын
question what happens is i leave the amp in?
@bigbootyfela5433 жыл бұрын
Leaving the amp in does nothing of your going to bypass it. Hope this helps 3 weeks late😁
@dmlong473 жыл бұрын
@@bigbootyfela543 I meant leaving the amp and wiring to it but now I know it needs an module to work thanks
@hoyt_arms3 жыл бұрын
Just buy aftermarket 4 channel and run all new speaker wire. And forget about that factory amp. Saves a big headache
@zacwilson29405 жыл бұрын
Hey man just wondering is the sound quality just as good? Running no amp just head unit? Cheers
@JameyCampbell_544 жыл бұрын
Zac Wilson better Factory amp has 1/3 the power output of most modern cheap head units
@yusufjorgenz59514 жыл бұрын
@@JameyCampbell_54 so if you don't bypass the factory Amp and you install a new head unit, wouldn't your speakers get power from both Amp sources? I have a option on my Kenwood to bypass (volume gets low) and through (volume gets louder)
@JameyCampbell_544 жыл бұрын
Yusuf Jorgenz your head unit should have a wire that connects to the amp out on the wiring harness behind the dash. It only lets one or the other send power to the door speakers
@Mark-wp4lw3 жыл бұрын
@@JameyCampbell_54 Yep. I "upgraded" to the Kicker amp and could literally tell no difference between it and the BA amp.
@J.A.R.J4 жыл бұрын
Can you add a sub to the factory amp ?
@BrentBeckham5 жыл бұрын
The link took me to an amp instead of the wiring kit.
@ParkerTheBasshead5 жыл бұрын
Well shoot! Not at my computer but I’ll fix that ASAP!
@BrentBeckham5 жыл бұрын
Just got around to ordering this kit. The problem that I’m having is kind of weird. I had Kicker Ks series speakers installed about a month or so ago and My rear speakers are working fine, but my front door speakers sound like subs and my dash speakers are getting all the highs. Will this kit fix my problem?
@stevendegiorgio31434 жыл бұрын
That factory amp sucks.Its a good paper weight.Its not like your beautiful aftermarket Amp.
@TATERSVIDEOS7705 жыл бұрын
i need help with mine, cant figure out acc. input. on my 05' jeep grand cherokee
@ParkerTheBasshead5 жыл бұрын
I had to run it to a 12v switched fuse
@TATERSVIDEOS7705 жыл бұрын
@@ParkerTheBasshead, I tried that but, seems no mater what I try I keep loosing my instrument panel and gauges when I turn the stereo.... any idea why? Im getting my harness in a couple of days but still unsure of how to avoid my problem
@ParkerTheBasshead5 жыл бұрын
ruby rl the harness should have your constant 12v and ground so I’d wait till it comes in and see if that fixes it.
@TATERSVIDEOS7705 жыл бұрын
@@ParkerTheBasshead does it come with instructions
@jamessvetlovics49485 жыл бұрын
Hey parker if you every open up your jeep again rip out the factory amp harness and Ill pay you for it.
@ParkerTheBasshead5 жыл бұрын
I would totally send it to you but I had to plug the wire harness adapter into the old harness
@zsavage1820 Жыл бұрын
G'z get a good radio if you are going to do all this.. pioneer sucks
@DJENERGY2103 жыл бұрын
And he paid about close to 170 for that harness forget that