How to carpet boat deck lid corners

No video

How to carpet boat deck lid corners

Рет қаралды 31,604

BBQ 314

Күн бұрын

In this video, I explain how I do the corners of boat deck lids, when carpeting.

Пікірлер: 27

@ghunter2250 4 ай бұрын

Great video, simple, smart with the template, just completed my boat decks, excited to start my lids with this method, thank you for sharing

@sshaw7912 5 ай бұрын

I spent $30 or so on a pair of upholstery shears and they helped out a great deal when i did my boat several years ago. I know your video is old but give it a try for the next go round. And by you some spring loaded clamps along with some "1/4 thick strips of would so you don't marr your carpet where you put your clamps. Good luck and appreciate the tip.

@krismilligan5117 Жыл бұрын

I sat here chopping up scrap carpet for a minute before I finally went only to look this up.. Awesome information. Thanks for that..

@bobnkrishunt Жыл бұрын

Glad it helped 👍

@jmartin1203 Жыл бұрын

You did me a solid bud! Thanks for getting to the point I'm about to do 7 lids

@bobnkrishunt Жыл бұрын

Your welcome, glad it was helpful. I never make videos, but had so many people ask so…..

@bobnkrishunt Жыл бұрын

Feel free to hit me up if you run into an issue

@Cristina-df3sn 2 жыл бұрын

I did it, it works perfect. This is the best video when it comes to make it right.

@bobnkrishunt 2 жыл бұрын

So glad it helped you 🙂

@keiransmith2148 2 жыл бұрын

Gee you did that well. Thanks for the video. I'm trying to install decks in an old aluminum boat. Most of the videos don't address the finer points to well but you did.

@bobnkrishunt 2 жыл бұрын

Thx, that’s why I made it. Wasn’t too many videos on here that addressed lid corners. None that don’t leave a seam all the way down the outside corner.

@bobnkrishunt Жыл бұрын

Something I never mentioned in the video is make sure you got lots of clamps. I used probably16 per lid. And I pre cut the strips of wood to fit inside and out. Good luck 👍

@markkienzle5095 2 жыл бұрын

Genius....I definately gonna steal yur knowledge....thank you!!!

@bobnkrishunt 2 жыл бұрын

Glad I could help 👍

@markemilyshepherd7981 2 жыл бұрын

Nice!

@lureup9973 4 ай бұрын

Thank you for this are you happy with the quality and price of the carpet, and where did you get it?

@bobnkrishunt 4 ай бұрын

I am happy with the results still looks great after what 4 yrs. Not sure where I bought carpet from anymore. Thinking it was something like, boat carpet.com I used 24 piling

@lureup9973 4 ай бұрын

@@bobnkrishunt thank you

@rudy1574 11 ай бұрын

Fold the taco first then fold other ?

@bobnkrishunt 5 ай бұрын

lol, I know right. Sounded funny but I believe the point got across

@lucianoingrassia8278 2 жыл бұрын

Scary to watch you cut with that knife with your hand so close, I installed carpet for 30 years with that knife and I'm surprised you still have finger tips.

@bobnkrishunt 2 жыл бұрын

I definitely didn’t get complacent using it. Never used one before, way sharper than a box cutter.

@williamhensley7745 4 ай бұрын

Doing it all wrong

@bobnkrishunt 4 ай бұрын

I’m so glad that you took the time to let me know that again 👍 We’re so glad you have absolutely nothing to share,that is even the slightest bit helpful. As I said 3 months ago if you know a better way, do share. Otherwise, go get yourself a nice warm cup of STFU !

@williamhensley7745 7 ай бұрын

I know a way better way

@bobnkrishunt 7 ай бұрын

That’s great, maybe you’d like to share with the rest of us. I made this video to help people. If there’s a better way, I’d like to learn it too.