Use the code "MJTIFF10" for 10% off your first order of yfood..See link below bit.ly/mjtiffplumbing_yfood

I like the intro, and I think you should keep it. For anyone that doesn’t like it they can just skip past it then everyone’s happy aren’t they 👌🏼😂

best tip I ever got was to have a mini whiteboard in my van, I write down what I use from the van to remember and replace it, I check it before I head to the merchants. Saved me loads of time.

I like your intro, its how you do things. It doesn't spoil anything, if anything, it makes me sit my arse down with a cuppa and watch more vlogs from before i subscribed to the channel.

Great video. As for intros like both but must admit the one at end explaining what went on or even out comes of jobs is great. But hey like it all. Well done. Another few biscuits and tea done lol

Top class Sir. No bodging with MJTIFF plumbing. Attention to detail, using paste on compression fittings, even the van cab looked tidy! How many plumbers can say that. Peace be unto you.

I think you should do both! Love the videos! All the best for 23 😊

Yes understand why some do not like long chat at the start to be honest i normally fasr forward anyway ,and that bit about the nuts feeling right so glad you said that ,thats years of experience coming to play ,well done loved it .

Remember using the Sunvic motor open motor close valve as one of the first ones in the late 60's them moved on to Tower/ACL then Honeywell. My favorite was always the Smiths Midi valve connected through a Potterton Mini minder as when the hot water light was on when the programmer was in an off position you knew you had a tank of hot water. Another good one Mark and yes you can not beat Tom Dudley,

great work ,thanks for working with 1 hand so we all can see ,must be hard

What’s up mark! Went and got myself a unilite neck torch after seeing it in your video the other week! Been spot on 👌🏻

Nothing wrong with having the intro as it adds to the interaction you create with us audience. You could even add the odd outros or even bloopers, if you have them, to keep people on their toes. Make sure people watch all the way to the end.

I do prefer the intros glad you changed the ball valve with the new siphon saved another call out have a good week

Another good video cheers. The ‘outro’ works well 👍

Hi Mark, great film as always, I always enjoy the small jobbing about films. The Thomas Dudley products do look quality, I don’t think I’ve used any yet but would love to try some. I do like the into as I know what to look forward to in the film. Have a great week, as always, take care, regards, Chris. 👍👍👍

Great content, enjoyed the outro at the end

There’s a lot to plumbing great stuff.👍👍👍😎😎😎

😂😂thought you was going to do a competition when you popped up at the end. Love the outro. Shakes it up a bit. 👍👍

Keep the intro, works for me mark 👍👍

Happy new year to you and family Mark. Great video. Great tip on the multi tool for rusted close coupled bolts beats using a hacksaw blade which is a nightmare. Motorised valves is something that’s always eluded me for some reason. Should you change the motor or the whole valve. I assume it’s good practise to fit valves either side of them so you don’t have to drain the system but I suppose you don’t always get the space to do that. Keep up the solid work Mark.

My missus said I watched this whole video like a zombie with my mouth open haha. I dunno why but I always enjoy the videos with leaks and toilet repairs more than the heating stuff

Your vids are always good, but I do prefer the chat at the end.

Always found the intro good, lets you now what coming up

Hi Mark. That always happens mate. I said in one of other comments that I take all my tools out at night. But when I load the van in the morning and get there and realise I left it at home. Not to much off a problem if near home, but pain if not. Again you went the extra mile buy changing drain plugs. Have a good weekend mate👍

Enjoyed the content😁👍

Nice content bud, not bothered about the intro/ outro do what’s best for you. Had a similar situation to you this week, took everything out of the van Sunday for a sort out, Monday morning it took hours getting to the job. Got on site and realised I’d left my van at home!🤪

The underside of that pan you were changing the syphon on is definitely Real world plumbing 🪠 lol 😂

Great video mate👍

Great video mate

Great video again

I like way you have been doing them

Hi Mark, Great video, for future reference 99.9% of valves have the same colour wires. Get yourself a inline 5 way connector (made by Regin). That way you can cut the wire without going in the wiring centre and just wire your new valve to that. Makes it easier to replace in future as well! ✌🏻

Honeywell motorised valves have been of shocking quality for sometime I started end of 1979😂 Honeywell valves were then made in Canada. Now there made in the EU and am constantly finding the motors failing far too quickly. I've stayed with them but they need to own up about the issues there having. Honeywell do a compatibility chart at the back of their wiring booklets which should give you even all the old makes. Sunvic. Satchwell etc. If you hunt around there's a manufacturer called Tower. They do the best compatibility chart any engineer could want👌 Nice video love these jobs, but maybe not the jarred drain offs 😂💦👍

I would have to say that the credits always come after the film , much better to get straight in and enjoy

Being completely honest with you mark, I skip the intro bit the "spoilers" so to speak then watch it at the end Cause I like to see it as it comes and how I'd deal with it to see if there's any differences in our way of working You stick to whatever way works for you regarding the video layout "intro, outro etc" I learned to just skip over it I'm sure others can do the same too if it bothers them that much? Anyways, those TD look better than the PoS one's I installed a while back so may have to give them a go again tbh You're a brave man using the honeywell again, but keep us updated on that one! 🤞all is well with it though, for you and the customer

Top job once again. Prefer the outro😊

I like the intros mate, sets the scene! Folks can always fast forward intros 😬

Great video as always. Maybe give the new format a few goes to see how it beds in, and just have a very quick summary (This week, I ha' bin mostly...") to kick things off at the start. You may have covered this before (I'm still catching up) but how do you as a sole trader block out your time from week to week and month to month between the larger projects and the smaller jobs? And after twenty-odd years do you reach a point where you decide to just do the nice stuff? ... unless it's a mate, of course!

Great video Mark, out of interest how long did you spend of the toilet siphon? Looking forward to your 2023 videos!

Hi Mark I allways use plug and socket on those valves you don’t need to go into the wiring centre much better 👍

Evening Mark. Intro or outro doesn't bother me mate I'm easy. It's your content so whatever works best for you whilst your putting it together? You can't please everyone! 😂 As for Honeywell, be interesting to see if that 2-port lasts until your next intro lol 😉🤣

Honestly mate, the video flows much better with you doing the intro This felt a bit random and disjointed but still enjoyed Happy new year

Hi, I quite liked the round up at the end of the video. Wasn't against the intro but why not change it from video to video, keep the haters guessing!! Lol. Keep up the good work.

Hello tiff. Love the videos what’s the name of that flexi mat you use to drain rads I can’t find it anymore and want one for my tool bag thanks

I actually like the outro, in the sense a bit of a roundup and discussion on what happened on the vid. Maybe you could also do a shorter intro just to give a brief overview of what's coming up?

I normally convert the toilet syphon to a push button

hello, great video how long does it take you to change an inlet and syphon on average?

I have had 4 of these fail changed finally changed for a screw fix valve as they always failed the same , water leaking into the back of the valve and corrodes the electrics inside . first one failed after 2 weeks back in 2008 in a new build

Don't think danfoss honeywelll same thread ye can try force them sometimes always prefer to change nuts

Love the videos Mark, but the inside of your van has more sponsors than a F1 car !

Hi Mark just a quick question regarding that plate at the bottom of the toilet cistern, as it,s flat and you can't get a bolt behind it i,m wondering where and how could you use them.

Your videos are fine as they are I had a problem with a mcalpine clicker bath waste, I don't mind paying double if the quality is there but this fucking thing didn't seem tight, its probably me but 40 years says it was a call back

Ohhhh Mark. Can you do a vid re your camera gear for KZfaq please. Cheers

Nice thick rubber that Marc not the sponge these lesser plumbers use 😂

Hello Mark. Great vid as always, thank you. Mark re the wet vac, great idea I agree but I saw a vid of James PlumberParts recently and he was talking about the Wolfcraft drill pump. Picked one up £15 just a whole lot easier to carry and re toilets at least you don’t have to fill your wet vac with, quite literally sh”””y water. Only a thought, tried one?? Best regards Simon

Is that slictite paste you're using

Intro for me, like to know with what’s going on.

Ditch the honeywell , use eph

Intro 👍

great video can I pick your brains we had a new shower try fitted but water goes away slow whats the answer fast flow drain or take the cup thats in it away

If you fitted an eph you wouldnt of had to change nuts. Saves you on the OV's lol

Skipping the intro would be like skipping the foreplay and going in balls deep dry. I like to find out how you've been Mark before you get to work.

🤘😂🤘👍👍

No intro, no outro, get on with the jobs and stop faffing around! 🤪

ty so much. so the kit i bought at a discount from city plumbing (only needed the valves, cheaper to buy the kit) you are now telling me right that city plumbing offloaded them knowing they were bad. honeywell did or didnt tell them? Dave Evans ceo of city plumbing still waiting for your email that was promised to me by vicky in accounts. i have something i need to talk to you about. email me as promised. mco....................... m j tiff cheers m8 thank you for sharing info i didnt know. valves are buzzing. and will fail. danger of fire? we can stick a compartment sticker on the boiler. we all know its loaded with clothes again on service. lets blame them eh? honeywell rep knows thers a problem. why no recall. dave evans shity plumbing supplies vicky in northhamton knows who i am. mj tiff ty for sharing. the more we share as plumbers and gas safe the beter.